Problems connecting Wii via wi-fi to Home Hub 5

Sorry if this has been posted before. New Home Hub 5 - but my Wii will not connect to the internet - although it clearly can see the hub. Nintendo book suggests using a static IP address or checking for MAC filtering - how DO i get into hub manager???

Use this link
http://bthomehub.home/
It could also be that the Wii has a problem with the dual frequencies on the Homehub 5.
Try giving the 2.4Ghz and 5Ghz frequencies different SSids. Just add a 5 to the end of the 5Ghz SSid so you know which is which. Check the 5 GHz Sync with 2.4 GHz: is set to NO.
You'll need to connect your other devices that can use both frequencies to both SSids if you want them to be able to use both frequencies.
See this link
http://bt.custhelp.com/app/answers/detail/a_id/44798/~/i-have-problems-connecting-5ghz-and-dual-band...
It might be that your Wii can not use the security that the homehub uses. You may have to change the WPA/WPA2 security to WEP on the 2.4Ghz frequency.
See link how to do that.
http://bt.custhelp.com/app/answers/detail/a_id/10360/~/how-do-i-change-between-wep-and-wpa-on-the-bt...

Similar Messages

I am trying to connect my ipad to my bt home hub have put in wireless key code but still not connecting

i am trying to connect my ipad to my bt home hub have put in wireless key code but not connecting

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

HT5569 im trying to connect my ipad to my bt home hub put in wireless key pass code but still not working

im trying to connect my ipad to my bt home hub put in password still not working please help

Reboot your router by unplugging it for a couple of minutes, then try it again.

Problems connecting a Satellite Pro 4600 to home wireless network

Hi,
My desktop pc has an Athlon 64x2 4200+ processor and 2 GB of RAM, with XP2 Pro. I have a Linksys WRT54GS Broadband Router and am connected with Virgin Media.
My daughter has given me an old laptop, a Satellite Pro 4600 with a Celeron 747MHz Processor, 384MB of RAM and XP2 Pro it has an Intel Pro/100 VE Network adaptor. I have fitted a Linksys Wireless-G Notebook Adaptor with SRX (Model No WPC45GX), so that I can use it around the house. However when I try to connect to the home network, although it "finds" a list of networks, I am unable to connect, and get an error message - "Windows is unable to connect to the selected network (my home network). The network may no longer be in range. Please refresh the list of available
networks, and try again."
I have tried connecting with the laptop in the same room as the router, but get the same message. In Device Manager, under Network adaptors, both are shown, and both are working correctly, but in the taskbar there is a red cross shown on both icons, one says that a network cable is unpluged,but I don't have a network cable fitted.
The other tells me that the wireless is not connected.
I presume that the adaptor is working as it can "see" wireless networks, plus I have used Lynksys support to check that all the settings on both Router and Adaptor are correct.
My wife has a new laptop and is able to connect to the home network without any problem.
Please can anyone offer any advice or assistance.

Hm,
for some reason you should disable your wired (cable) network connection and use the client from the PCMCIA wireless network card. Maybe its just the problem that your system cannot separate between both network connections and gets some error. You should also go to the Linksys website and download the latest driver and client for the card, so you can make sure that software is up-to-date.
Another good idea would be to visit www.microsoft.com and check the support center for any "Knowledgebase documents" which could probably solve the problem.
Since your machine is really old and no-one uses PCMCIA cards anymore, you will maybe wait some long time for an answer in this forum. Maybe you should check the linksys site for some support section. Perhaps they could help you..
Greets

Can I connect more than one device to home hub?

I am a new user and have my PC connected to my home hub and all works well.
My husband has just got an ANDROID and we want to connect as well. I thought I was doing it ok and entered the security key but all I get is authenticating and not much else and it does not connect. Have I missed something do I have to put anything else in other than the security key?
It connects ok to the external BTwifi and BT Wifi with Fon but of course we are not supposed to do that.
Sue

it may be a problem with your Android (whatever model) as any home hub or WiFi router should take loads of other devices I am not sure there is a limit but I have 8 connected.
If you have anyone else that has a tablet or phone that you can get them to test to see if the problem is with the hub or your android device.
The only other thing I can suggest is that if it is a home hub 4 which also uses 5Ghz as well as 2.4Ghz some people have had problems with 5Ghz and if you can see both from your device selecting the 2.4Ghz may help.

Connecting with a Wireless Printer on Home Hub 3.

How do I get a XP Notebook to connect with the HP Photosmart 6510 connected wirelessly to my BT Home Hub 3.
My Network Places shows BT Home Hub 3.
Double click on HH3 and scrolling down to My Home Network.
You can see HPFE0AAB under wireless network, which is the HP Photosmart 6510.
According to the Photosmart it’s url is 192.168.7.71 and it is correctly connected to the hub.
The XP Notebook does have the relevant basic printing drivers installed for the Photosmart.
Perhaps I should add that I gave up trying to connect the Windows 8 Desktop to the printer wirelessly and used a USB instead. I’m not sure if the problem is with the set up of the Notebook or the Hub. I have tried turning off firewalls which so far seems to make no difference. I am running MSE on the Notebook and Defender on the Desk Top.
I've tried so many approaches I'mgoing round in circles.
Solved!
Go to Solution.

Here are the GENERAL steps on how to add a wireless printer on your wireless network.
As you have said that it is already connected and visible to the network it is a case of checking the settings below then if ok go to “adding printer to your networked computer” section
The wireless printer must have a static (i.e., manual) IP address assigned to it from your network IP address range. It cannot be DHCP enabled, otherwise every time DHCP assigns a new address, your printer port will stop working.
How to set a manual IP address on your printer:
When the printer is connected to the network the first time, the router will assign an IP address to it. To get the IP address that the printer was assigned, find the printer on your network and right click on it. It will bring up a properties box. The IP address for the printer will be found somewhere in there.
Using an Internet browser, type the IP address of the printer into the address line of the browser and press enter. It should bring up a printer configuration window.
Now, since each printer is different, I can't give you the exact steps, HOWEVER, here's what you are looking for:
Find a Network - TCP/IP configuration menu. Somewhere in that menu, it will give you the choice of setting a manual or static IP address versus a DHCP (Dynamic Host Control Protocol) assigned address.
You want to manually set the IP address to the address given on the configuration page. This would normally be 192.168.1.xx. The subnet mask will normally be 255.255.255.0 and the gateway will normally be the IP of the router, usually 192.168.1.254
Once the IP address is assigned permanently to the printer as a static address, you are now ready to add the printer to each computer on your network.
Add the Printer to Your Networked Computers
In Windows XP, follow these steps to add the wireless printer to your computer:
Go to Start, Printers and Faxes.
Double click on Add Printer
Click Next.
On the Local or Network Printer dialog box, choose Local Printer and UNCHECK the box that says "Automatically detect" the printer. Click Next.
On the Select a Printer Port window, choose to Create a New Port, and then under Type of Port, choose Standard TCP/IP port. Click Next.
Make sure the printer is On and Ready, and connected to the network. Click Next.
Type in the static IP address of the printer that you set in the steps above. Click Next.
It will then try to connect to that IP address. It you typed it wrong, or the printer is off, it will come back and give you an error.
If all is well, it should then ask you for the printer driver. Either set it to find the driver that you have previously installed or insert the CD for the printer, and find the Windows XP version of the driver.
Then choose the driver you want to install.
Click Next. It will install the driver and ask you to name the printer.
When it is done, click Finish. (You can choose to print a test page if you want).
Hope this helps.

Connecting time capsule wirelessly to BT home hub

Help unable to set up time capsule to wirelessly join my BT home hub (original white home hub for use in UK). Goes through all the stages then when restarts can't find airport device. Took it to local genius bar and worked fine there. Is this a problem peculiar to home hubs?

ESM@ESM, welcome to the discussion area!
In order to "Join a wireless network", you need to know the exact type of wireless security that your BT Home Hub is using, so you can provide those settings to the Time Capsule. It cannot join your network unless you have the correct settings.
It would be much easier to configure your Time Capsule to connect to your Home Hub using an ethernet cable. This will still allow you to use your Home Hub wireless network for backups, and you'll also have the option to use ethernet for backups, which will allow you to backup much more quickly. Can you consider that option?

How to connect airport time capsule to BT home hub 4

I am finding it difficult to connect my new airport time capsule (ATC) to the BT home hub 4. On opening the time machine it asks me to configure the time capsule before using. Should I be using the ATC as time machine only or should I be re-routing wireless from the ATC.

Make sure the MBA has ipv6 set to link-local only for wireless.
I strongly recommend using short names, no spaces and pure alphanumeric.
eg TCgen5 and TCwifi
In fact if you keep having wireless issues.. with the MBA in the same room as the TC, change the wireless name to TC24ghz and TC5ghz so you have different names for both bands and see if that doesn't help.. try to connect to this band and then the other.
Use WPA2 personal security.. password 8-20 characters mixed case and numbers.. no non-alphanumerics.
Do not hide the wireless.. that is against the code and simply leads to issues.
If you still have issues.. post back.. does the MBA work ok on other routers or wireless access points??

Can't connect Kindle Fire HD to BT Home Hub 3

I've just bought a Kindle Fire HD and can't get it to connect to my BT Home Hub (I think it's a 3) I have an ipad and iphone and they are connecting fine....help?

See link for connecting an Android tablet. It should be more or less the same for a Kindle Fire.
http://bt.custhelp.com/app/answers/detail/a_id/44480/c/346
Make sure you use the wireless passkey found on the label of the hub and not the admin password or your email password.

Connecting mobile phone to my bt home hub

Hello can anyone help me please i have just bought a Samsung Galaxy S 2 and I have been trying since monday to connect to my home hub and it just wont work I can find my BT Home Hub on my WIFI available networks it asks me to enter my password which I did but it just wont connect.
Any help would be greatly appreciated.
Magsmitch

Hi are you entering the hubs wireless code ?
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

Connection issue with PS3 using BT home hub 5

Hi guys i have recently switched to BT infifnity and the BT home hub 5, now i cannot acces the playstation store, i can sign in, i can get on the web, I can got to amazon and download a film,etc, but everytime ive gone to the store is says the its down for scheduled maintenance, and i know thats not the case as ive phoned Sony support who have told me thats not the case. ive tried port forwarding , and putting the PS3 into DMZ?...but nothing seems to work , I cant find anything online about it either, so any help would be most welcome. Thanks.

Sorry I missed the bit about the PS3 store is the problem and everything else is fine,I replied to a topic earlier linked below.
http://community.eu.playstation.com/t5/PS3/PlayStation-Store/m-p/23497490#M2056477
In a nutshell delete and re-install the Playstation store app and check your PS3's systems date and time is correct.

TS1538 Problem connecting iPhone via wifi to iTunes

Since upgrading to iOS6 and the new iTunes software, I have trouble connecting my iPhone 4s to iTunes via wifi. I must shut down the iPhone and restart it to connect via wifi to iTunes. But this works only once, the process must be repeated each time. Does anyone else have this issue? Is there a resolution?

Try a different USB port or sync cable.
Close and restart iTunes on the PC.
Restart the PC.

Problems connecting RAZR via Bluetooth

Hey guys...
I have an iBook G4 1.33MHz running 10.4.7 but, for some reason, my RAZR will not pair with my iBook. It just will flat out not discover it.
I go to my phone, click on discoverable, and let that run. Meahwhile, I run the wizzard to connect and no matter if I choose mobile phone or any bluetooth device, my iBook fails to find my phone, even though it's 10 inches away.
Any help would be appreciated.

Welcome,
I've done this so be patient; wait until you've actually hit the search function in the bluetooth setup utility. Then hit discover me on the phone [it probably won't work the 1st time]. Then hit search again and the phone [if necessary]. Just keep trying in this order first the Mac, then the phone, and you should get it, it is a little more difficult than other bluetooth devices.

BT Home Hub connection issue on XBOX 360

I have just upgraded from a BT Home Hub 3, to the BT Home Hub 4, before the upgrade I ran Sky TV wired, and 3PCs wifi, my Ipad and my Iphone. I also ran my XBOX 360 wifi, and a PS3 wifi, all worked no problem.
Now I am on BT Home Hub 4, all my connections are the same all working well apart from the XBOX 360.
I have tried doing the fix on the BT site logging into the Hub changed the SIDD and set the other bit to NO. this did not work.
I then reset the XBOX to factory settings as this was in another fix, I then reset the XBOX to the Hub 4, logged on to call of duty ghosts got half way through a game it crashed out saying no conection reset to test conection.
The Hub will conect to my XBOX 360 but only stay conected for up to 14 mins at most.
Do I need to go back to my BT Home Hub 3, Can any body help its starting to be a pain. As one good person said use a wired conection that would be good, but due to location would be hard. I did think upgrading was ment to make things better not harder. Please Help.

To add, I had on online chat with BT, they said that no problems exist about XBOX 360 and the BT Home Hub to do with wifi.
If this is the case why have a fix on the BT site, that does not work may I add well not on my XBOX.
I found BT online chat not much help in this case.
Please advise and help

Print error - there was a problem connecting to the server - spinning beach ball

This has happened pre-yosemite and since. It used to only happen at home but now also happens at work. Every time I try to print, I get a spinning beach ball and a long delay until I get an error message saying there was a problem connecting to the server. At home, after clicking OK, I get a second spinning beach ball session with same error. Once I click OK second time, I get print window and can print. At work, it's only one session of spinning beach ball. The office problem occurred after upgrading to yosemite. I've deleted and added the printers without resolution. I've repaired permissions. The home problem has been going on for at least a year, probably a couple. Using a macbook pro.

There are many possible causes for this issue, and it may be very hard to resolve without wiping your account clean of everything except documents as a last resort. Please take each of the following steps that you haven't already tried. Back up all data before making any changes.
If you get the alert in the login screen before you log in, stop here and ask for instructions.
Step 1
If you get the alert as soon as you log in, it's probably caused by one of your login items or by software that otherwise loads at startup or login. Ask if you need help identifying it. Known offenders are "1Password" and "Adobe Resource Synchronizer."
Step 2
If there's an icon representing the server in the sidebar of a Finder window, hold down the command key and drag it out.
Step 3
In the Finder, press the key combination command-K or select
          Go ▹ Go to Server...
from the menu bar. In the upper right corner of the window that opens is a Recent Servers popup menu represented by a clock icon. From that menu, select
          Clear Recent Servers…
and confirm. Test.
Step 4
Open the Printers & Scanners pane in System Preferences and delete any network devices you no longer use. If in doubt, delete them all and add back the ones you want.
Step 5
Triple-click anywhere in the line below on this page to select it, then copy the text to the Clipboard by pressing command-C:
~/Library/PDF Services
In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return. A folder may open. If it does, move the contents to the Desktop, or to a new folder on the Desktop. Log out and log back in. Test. If there's no change, put the items you moved back where they were and continue.
Step 6
Open the folder
~/Library/Preferences
as in Step 5 and move the file named "loginwindow.plist" items in that folder to the Trash, if it exists (it may not.)
Log out and back in again, and test.
Step 7
Other possible causes are references in the iPhoto, iTunes, or iMovie library pointing to the server, bookmarks in the Preview application, and PDF files created by Adobe Acrobat with embedded scripts.
Try rebuilding the iPhoto library, if applicable.
Step 8
Resources such as images or sounds stored on the server may have been added to various applications. Examples would be pictures added to Contacts and custom sounds added to Mail. The range of possibilites here is practically infinite, so I can't be more specific. You might get a hint by launching the Console application and looking for error messages that appear at the same time as the alerts.
Step 9
Disconnect all wired peripherals except those needed to start up. Start up in safe mode. Test. After testing, restart as usual (not in safe mode) and verify that you still have the problem.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Step 10
Triple-click the line below to select it:
/System/Library/CoreServices/Directory Utility.app
Rght-click or control-click the highlighted text and select
          Services ▹ Open
from the contextual menu.* The application Directory Utility will open.
In the Directory Utility window, select the Directory Editor tool in the toolbar. Select Mounts from the Viewing menu in the toolbar, and/Local/Default from the node menu, if not already selected. On the right is a list of names and values. By default, the list is empty. If it's not empty, post a screenshot of the window and stop here.
*If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). Open a TextEdit window and paste into it (command-V). Select the line you just pasted and continue as above.
Step 11
Open the following file as you did in the last step:
/etc/auto_master
It will open in a TextEdit window. The contents should be exactly this:
# Automounter master map
+auto_master          # Use directory service
/net               -hosts          -nobrowse,hidefromfinder,nosuid
/home               auto_home     -nobrowse,hidefromfinder
/Network/Servers     -fstab
/-               -static
If there are any other lines in the window, post them. Otherwise, close the window.

Problems connecting Wii via wi-fi to Home Hub 5

Similar Messages

Maybe you are looking for