Problems creating business partner (transaction BP in ECC 5.0)

Hello,
I am trying to create a business partner in order to assign it to BP role employee (BUP003). I enter transaction BP, and then try to create user.
Whenever I try to create a user the error message: <b>No internal standard grouping exists  Message no. R1117</b>
Any clues on what this means, and how the issue can be solved. Will reward points for good answers.
regards,
Joe

Take a look at view V_TB001. One of the groupings for BP numbering has to be flagged as Internal standard grouping. If there is no group flagged as internal standard, most likely you don't have any internal groupings at all and you will have to create one.
Rodrigo

Similar Messages

  • Error in creating business partner through transaction FPP1 in ECC6.0

    HI,
    We have upgraded our system from 4.7E to ECC6.0.Now when we are trying to create business partner through transaction FPP1 we are getting error as " Exception condition "NO_ACTIVE_TAB" raised."
    Can any one help us in rectifying the error and tell us the possible causes of error.. .??
    Regards,
    Shruti Singh

    Hello,
    Notes  696189 & 618123 may be of some help to you....:)
    Regards
    Olivia

  • Setting required to create Business partner record in SAP GTS for the customer who transferred from the SAP ECC system

    Dear Experts,
    Can you please suggest me list of activities require to automatically  create Business partner record in SAP GTS for the customer who transferred from the SAP ECC system .
    i.e If I create the customer master record and transfer the same CMR to SAP GTS , what are the setting requires to maintain in SAP GTS sytem to automatically create the Business partner .
    Ram

    Hi Raghu,
    Below are the main settings required to enable you to transfer Customer Master Data to SAP GTS. Please note that their is a difference between, Customer Master Record and Customer Master Data in terms of data and for GTS, we transfer Customer Master Data. Hence, below are the settings required:-
    In SAP ECC system:-
    Activate the change pointers for Customer Master Data apart from enabling basic connection settings.
    Schedule a job to run at regular intervals to transfer all the customer master data for the available change pointers to the SAP GTS system
      2.  In SAP GTS system:-
    Maintain the Mapping for ECC Customers to SAP GTS Business Partners in the General settings area of the SPRO in SAP GTS system
    Ensure that the Number range is maintained for those GTS  Business Partners.
    Also, some time you may be required to maintain the organisational structure to ensure full working.
    I hope this will be helpful to you.
    Regards,
    Aman

  • Problem when creating business partner

    Dear Expert,
    I have a problem when creating business partner from T-code BP
    I can't input vendor number in company code header data
    The vendor account field is set to required entry.
    When create business partner, I make some entry like :
    Business partner category : organization
    BP Role                           : Landlord with vendor account
    Grouping                          : external number assignment
    Company Code                 : 1000
    The problem is everytime i try to input vendor number, it always failed.
    The Vendor account field always display ' <external> '
    It's strange.. the vendor field it's seem locked by grouping
    What should I do?? 
    ___Company Code Header Data___
    Company Code  :   1000
    Customer          :   <external>
    Vendor              :   <external>
    I need your advise.. thank you very much
    Thanks,
    tweety

    Hi,
    I would like to suggest you some SAP notes that contain useful information aobut customer-vender intergration of ERP2005.
    956054  BP_CVI Customer-vendor integration as of ERP2005 (ECC600)
    This notes describes the changes (new development) of CVI AND the necessary customizing settings.
    In short, CVI is now bidirectional.
    1. BP -> Customer/Vendor: it depends on the roletype configuration, if a customer/vender is created.
    2. Customer/Vendor -> BP: it depends on the account group if a BP is created.
    Data is changed then synchronoously.
    Further notes that might be of interest.
    851445 BP_CVI: Details about reports to be executed for ERP 2005
    727205 Conversion of industry Customizing in BUPXPRA12
    1077616 Business Partner Upgrade FAQ
    If you have further questions please let me know.
    Regards, Franz

  • Problem in creating business partner

    Hi,
    When we create business partner from customer in RE Classic in Create lease out(T-code FOV1) , system is not copying the address of customer to business partner.
    Thanks in Advance

    Hi,
    Check note:
    Note 681760 - Business partner: No copy of object address
    Regards,
    DAS

  • ERROR IN CREATING BUSINESS PARTNER ON DOING IT 2ND TIME - SAURAV  LAHIRY

    Hi friends,
                         I a currently using a custoM tcode zib52  to create a business partner in CRM. My problem is that on creating the first time the Busness partner it is getting created. But on pressing it in the change mode and then clicking the create patient button it is giving a short dump. I am using FM BUP_PARTNER_MAINTAIN where i am giving '01' for create.
                                                                       Regards,
                                                                       SAURAV  LAHIRY[error1.htm]

    Hi All,
    Thanks for your quick reply.
    Recently SAP has upgraded support packs and becuse of this dump is occuring. Piece of extra code has got added in existng code. We can not chage / comment that cde as the probe is in Zt-cde. But even if it is custm transaction, any standard includes havebeen used. And in sme of those include, that piece of code has got added.
    Steps - First time business partner is getting created successfully. but when we save it, go back and cick on create business partner than it is going into short dump.
    i had debug the code and found that GUID number is not getting cleared i second time.
    can you please tell me how to clear GUID number? is there any FM / methods? Aso can you tell me hw to refresh/ clear global memory for FM BUP_PARTNER_MAINTAIN?  
    Thanks in advance
    Saurav

  • Error while Creating Business partner in FPP1

    Hi,
    I can't create Business partner in standard T.code FPP1 in Test System and getting the following error
    "Application object BUPA: Table EBUPD does not exist".
    Kindly help me in solving this issue.

    Hi Venkatesh
    Please add the message class and message number - in this case R1 149 - next time you post a problem.
    There's probably an issue with your setup with for the Business Partner Screen Layout (area menu BUPT).
    The error is raised, because the EBUPD is not a table assiciated with the Business Parter (Application object BUPA). See transaction BUSG or table TBZ1H. It is in fact a dynpro structure.
    Now there's a table that links the dynpro structure fields to the db table fields, which should translate the structure EBUPD into table EKUN fields: TBZ1C. Technically, this is done in function BUS_DYNFLD_TO_DBFLD_CONVERT and it returns the dynpro structure instead of the DB table if there's no corresponding entry in TBZ1C.
    So please check if you can find following entry in TBZ1C (client dependent):
    OBJAP  DYNPTABNM  DYNPFLDNM  DBTABNM  DBFLDNM
    BUPA   EBUPD      +          EKUN     +
    Or via transaction BUSP - Screen field --> Database Field
    If the entry is missing I suggest you add it.
    Yep
    Jürgen

  • Problem in business partner creation in GTS

    Hi experts,
                 To create business partner in GTS I have used BAPI_BUPA_CREATE_FROM_DATA. It is creating business partner but it is not updating the table u2018 /SALSLL/ADRCONu2019  which is necessary for SPL check in GTS. Is there any functional module / RFC specific to GTS which will create a business partner as well update the u2018 /SALSLL/ADRCONu2019  table?
               I also tried to create a custom RFC by recording the transaction FS00001 in GTS(sap netweaver 2004s) for the same purpose. This RFC is working fine in GTS system ( without RFC call) but while calling this RFC from another R/3 system(4.6C) it is giving the error u2018Control Framework : Fetal Error u2013 GUI cannot be reachedu2019 . Any solution or workaround for this issue?
    with regards,
    S.Janagar

    Hi
    Can you kindly suggest the SAP note number please. Even we ar efacing porblem to transfer ECC BP's to GTS.
    we are creating BP's in CRM and replicating them in ECC and wish to transfer these to GTS for SPl screening - this is the sceranio. Would be glad if you can suggest on how to achieve this.
    Thanks
    Rajan

  • Create business partner

    Hello Experts,
    In my ECC 6.0 system, transaction code CFM2 "Activate or Deactivate Integration Model";
    The option of Create Business partner isn't there. How to activate Create Business partner in t.code CFM2?
    Regards,
    Aravind

    Hi Chirag/ Senthil,
    Thanks for the reply.
    In CFM2 screen, of Activate or Deactivate Integration MOdel.
    The following are the options:
    Selection Criteria
    Special CIF settings
    Parallelized Transfer
    PP/DS and SNP Planner order
    Transfer Business Partner
    In the current client there is no option of "Transfer Business Partners".  How to get this option back?
    I hope the query is clear now.
    Regards,
    Aravind

  • Role to create business partner

    Hi Experts,
    I am facing a problem that I want to create a role for the user and this role is for create business partner and the spacification is tat if one user careate a business partner then only that user can edit that business partner no other user can edit this business partner ( other user can see it only in display Mode).
    Regards,
    Sid

    Hi Sid,
    I must say - this is a very interesting problem !
    Can you try this approach - in the event AUTH1 (accessible from transaction BUS7), register your custom module. In this custom module, you would need to check if the BP you are trying to open has been created by you or not. Allow the activity to be 'Edit' only if you are the creator of the BP.
    Technically, you need to check if BUT000-CRUSR  = sy-uname.
    If this condition is violated, you will need to change activity mode to 03 (display).
    The event AUTH1 is triggered when you open a BP or try to switch to change mode, so it will be a good point for you to control the access.
    I hope this helps.
    Cheers,
    Rishu.

  • Create business partner for existing employee for SAP version 4.7

    Hi all !
    Do you know of a similar program of function like the HR_SYNC_PERSON in ECC 6.0 but work for version 4.7 ?
    I have look in OSS and SAP forum but I have not found.
    Our company need to create business partner for all existing employee but for our SAP 4.7 version.
    Thanks
    Hugo Nguyen

    USER EXIT
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.sapgenie.com/abap/code/abap26.htm
    http://www.sap-img.com/abap/what-is-user-exits.htm
    http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
    http://www.easymarketplace.de/userexit.php
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.sappoint.com/abap/userexit.pdfUser-Exit
    http://www.sap-img.com/ab038.htm
    http://help.sap.com/saphelp_46c/helpdata/en/64/72369adc56d11195100060b03c6b76/frameset.htm
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.sap-img.com/abap/what-is-user-exits.htm
    http://expertanswercenter.techtarget.com/eac/knowledgebaseAnswer/0,295199,sid63_gci982756,00.html
    Transaction Code - MM41                     Create Material &
    Exit Name           Description
    MGW00001            Material Master (Retail): Additional Data
    MGW00002            Material Master (Retail): Number Assignment
    No of Exits:          2
    Transaction Code - MM42                     Change Material &
    Exit Name           Description
    MGW00001            Material Master (Retail): Additional Data
    MGW00002            Material Master (Retail): Number Assignment
    No of Exits:          2
    Rewards if useful.........
    Minal

  • Dump Error while creating Business Partner in FPP1

    Dear Experts,
    I am using the EHP5 IS-U component. I am getting the below dump error, when I am trying to create Business partner in T.Code: FPP1.
    **Error in the ABAP Application Program**
    **The current ABAP program "ISU_BUPA_EVENT_DINP1==========FT" had to be  terminated because it has come across a statement that unfortunately cannot be executed.**
    **The following syntax error occurred in program "SAPLES02 " in include "LES02U14  " in line 30:**
    **"The data object "BUS0DIINIT" does not have a component called "MUSTER_KUN".**
    I have searched SAP notes, but I am unable to find any suitable notes to resolve this issue.
    Could anyone help me to resolve this issue.
    Thanks in Advance,
    Regards,
    Aswin

    Hi,
    Please don't go adding fields. Aren't we talking about SAP-standard structures here?
    Have you actually checked (in transaction SE11) that the structure ISU_EKUNINIT is included in the BUS0DIINIT?
    If it is, and the field MUSTER_KUN is missing, then you should raise an OSS note.
    If the structure is not included, you should also talk to OSS. Your ISU installation might be incomplete?
    cheers
    Paul Bakker

  • How to create Business Partner in CFM

    Hello,
    I want to Know which TCode should be use while creating Business Partner in CFM Module
    Regards
    Reshma

    Dear Reshma,
    Please, use the transaction "BP" in CFM module to create a business partner.
    Regards,
    Paulo

  • How to create business partner in solman

    How to create business partner in solman?...

    Hi,
    Check pages 8 - 11 in this document.
    https://websmp209.sap-ag.de/~sapidb/011000358700001197002005E/Addtional_Information.pdf
    This would solve your problem.
    feel free to revert back.
    --Ragu

  • No users available in the change period (Create Business Partner)

    Hello!
    I would like to set up the business partners for Service Desk.
    If I choose the solution and execute "Edit --> Create Business partner"
    no useres are shown under the system.
    If I change the data selection for an earlier time or blank, the situation does not change, meanwile I have enough users in the satelite systems.
    How can this problem be solved?
    Should the user have special autzorizations?
    Thank you very much!
    regards
    Thom

    Hello!
    Thank you for your response.
    Unfortunately it does not connection with adding some roles to all the users in the satelite systems.
    I have done this, but without success.
    <b>Has someone other information how to see the users from satelite systems in Solution Manager for assigning them to the business partners?</b>
    (I have SAP R/3 Enterpeise 4.7)
    What very strange is: for the local Solution Manger all the users are shown.
    Thank you!
    regards

Maybe you are looking for