Problems in assignment of a contract with several Items to orders.

Hi everyone,
I have a problem in SD Sales Document Processing :
I have a contract that contains 2 Items (with the same Material Number)
I want to assign this contract to multiple Orders by using the transaction 'VA02' :
Code :
CALL TRANSACTION 'VA02' USING bdcdata MODE 'N' UPDATE 'S' MESSAGE INTO wt_mess.
However, no allocation has taken place !
Table 'wt_mess' contains no error message !
It seems that assignment a contract to orders does not work if the contract contains several Items !
Does someone had the same problem ?
Thanks & Regards
Hassan Mounim

Hi,
I think u have activated the withholding tax for the whole contract. this can be done at the condition type level also in REFX. use the terms tab in the condition tab in the contract for the same. this should work.
Regards,
Deepak

Similar Messages

Several PR clubbed to one PO but with several Item lines?

Hello SAP gurus
Is it possible to merge several Purchase requisitions in APO into one Purchase Order but with several item lines in ECC?
If I have 50 PR in APO and CIF them to ECC, I want them to show as one PO with 50 item lines in ECC.
And I also need to know if it's possible to transfer PR from APO to ECC and set it to "blocked" before it is "approved" in ECC.
Like an approval workflow would work in MRP.
I would jump for joy for some answers.
Christina

Hi
It is possible. Please try the below steps.
1) Create the PO manually with the total qty of both PR.
2) Go to the delivery schedule tab and there is button to split the delivery scedule, select and split with the required qty
3) Assign the relevant PR to the respective schedule line.
Also you can use the option suggested in the previous message.
Now the PO will have 1 line item but 2 schedule lines
Hope it helps.
Thanks / Karthik

Renewal offers with several items

Hi experts,
How can we create a subscription renewal offer with several items.
Thanks & Regards,
Srikanth.M

Thanks all
Reached Solution
Regards,
Srikanth.M

Block account assignment category in PR with service item category

Hello Gurus!
Is it possible to disble all account assignment category in PR when using service item category in PR? Only leaving "U" as possible option?
I see I do it in customizing under Define Combination of Item Categories/Account Assignment Categories by deleating all the combination but the D-U combination. However, this will affect also the PO documents.
Is there any other option?
Thanks,
Alejandro Es

Hi
I am not sure we can achive this or not check following link ,it has user exit and bapi for PR
[/community [original link is broken] D=649304]
Regards
Kailas Ugale

How to modify position in the contract with BAPI_CUSTOMERCONTRACT_CHANGE

Hi experts,
I m facing a problem when i modify a contract with BAPI BAPI_CUSTOMERCONTRACT_CHANGE, indeed it adds new position for the same material instead of collecting its quantity, is there another BAPI to do so or should i copy this BAPI and modify it?
Thanks in advance.

Hi,
system details:
ST-PI:       2005_1_46B
ST-A/PI:     01G_R3_46B
SAP_NOTES:   46B
SAP_HR:      46B
SAP_BASIS:   46B
SAP_APPL:    46B
SAP_ABA:     46B
Content of LOGIC_SWITCH:
PRICING         KNPRS           CHAR    1
ATP_WRKMOD      ATP_WRKMOD      CHAR    1
SCHEDULING      CHAR1           CHAR    1
NOSTRUCTURE     XFELD           CHAR    1
Sergej

Relase strategy characteristic with several material groups

Dear Experts,
Actually I'm implementing the MM Module, 6.00 version and I have the following issue:
I created the release strategy Purchase Order, with these characteristics:
- Material group
- Net total purchase order
- Plant
The error consists in the Material Group characteristic don't run with several Material Groups. It seems that it could be possible only with one Material Group.
If you know how I could work the characteristics with several material groups, pleas tell me.
Thanks in Advance,
Adriana Corredor
MM SAP Consultant

Hello, Adriana,
it isn't clear what you mean by "characteristic don't run with several Material Groups":
- is it that you cannot enter multiple values in classification? Then check whether you chosed "Multiple Values" in "Value assignment" subscreen of characteristics maintenance, transaction CT04;
- is it that your release strategy isn't assigned to PREQ with several items with different MATKL values? It is neccessary to realize that if you use the coverall release of PREQ (which I guess you are using), the values of items has to be "summarized" (for purpose of release strategy assignment) into structure CEBAN "Communication Release Strategy Determination: Requisition"; the release strategy classification are then evaluated against this structure; if there is any field which differs for items, it is passed to structure CEBAN as empty; so either you have to have release strategy with MATKL empty, or you can modify the CEBAN content by enhancement M06B0001 "Changes to communication structure for release of requisitions", or you can prevent creation of PREQ with certain not-allowed combination of MATKL via user-exit or badi;
Kind Regards
TomT

UNBILLED RECIEVABLE ACCOUNT- SERVICE CONTRACT WITH REVENUE RECOGNITION

Hi SAP Gurus,
I want to draw your kind attention towards my problem:
I have created service contract with one year contract and created an invoice for the whole year in advance.
Now in-between i cancelled a contract (after three months) and want to recognised a revenue for the contract period , so i'm creating a revenue recognition for the three months one by one using transaction code-VF44,
first month revenue recogniton is working fine as first month amount is going from deffered account to revenue account
But for second month instead of deffered account ,system is using unbilled recievable account ,which is wrong .
Can anybody tell me why the system is picking unbilled receivable account instead of deffered account in case of second month revenue recogniton.
This may help us:
"When i was cancelling a contract ,at that time i was entering a billing plan end date in billing plan tab at an item level.
and just after entering end date ,system was creating two lines instead of one in billing plan tab and i think because of that extra line system is picking unbilled receivables in second revenue recognition."
Thanks in advance
Ujjawal
Edited by: Ujjawal Singh Karki on Dec 29, 2010 12:05 PM

Hi,
Thank you for your reply.
I am doing a contract billing for overall period that is for 12 months (contract is of 12 months).
Just after 3 months i have realized that somehow we have to cancel the contract and we canceled that in 3rd month.
I had created the created a contract with periodic billing plan and for canceling that contract i'm putting contract end date in BILLING PLAN TAB as 31/03/2011 (Let say contract is from 01/01/2011 to 31/12/2011).
Can you/anybody please tell me whether is this the correct way of canceling the contract with periodic billing plan?
As per your analysis:
"It seems you have done the billing document for one period and you are doing the RR document for multiple periods and hence the revenue is going to unbilled receivable account for the period for which billing document has not been done"
As i have billed the customer for 12 months but contract was only for 3 months so i'll create RR for only 3 months and for rest of the period (i.e. 9 months) i'll create credit memo and send it to customer.
"Please use a billing type where you will specify only start date and end date of the contract and not the billing plan in contract"
How can we use billing type for contract start and end date .
I think as soon as i'm changing the dates in billing plan tab system is proposing another line item with different billing dates and that is not getting covered under deferred account that is still unbilled amount .
Waiting for your valuable inputs.
In case of any clarification kindly revert to me.
Thanks,
Ujjawal
Edited by: Ujjawal Singh Karki on Jan 20, 2011 11:10 AM

Problems since i signed a contract

My phone bill is $192 this month it should only be $150. I have had this problem since I started my contract with y'all. I'm ready to go to Sprint and have it bought out by them because I'm so tired of dealing with the same problems each month. last month I paid $200 and had problems with my internet because it never renewed when it was supposed to and kept adding gigs and charging me for it. Every time I have a problem I have to go to the store three towns over from where I live to get help because no body ever answers the phone when I call.

It sounds like you are exceeding your data plan every month. That's on you.
Learn how to curb your usage so you don't go over and problem solved.
If you need help curbing data use, just ask how.

Is it possible to 'Load Up' the cursor with several 'Place' items?

It happens often enough that I have a folder with several items I want to place. I can go back and forth individually and command D to the folder window choose the next item and then place in the document. When there are page after page of items, it would be handy to be able to select several items that will go on one page and then 'spit them out' so to speak, from the cursor by repeated clicks, machine-gun style. Is this possible to do?
TIA,
Ken

Absolutely. Select them all. If they aren't in the correct order when you go to place, use the arrow keys to cycle through, and the Esc key to cancel an object.

Using Contract with SRM-MDM using several Web Service ID's

Dear Experts,
ALL of our Contracts were created and still being created by adopting products from CCM, meaning BBP_PDIGP-CATALOGID holds the Web Service ID and BBP_PDIGP-CATALOGITEM holds the Catalog Item GUID.
When trying to create a Shopping Cart by selecting a Product from CCM and adopting it to the SC the system will assign the contract as a source of supply for this Product (of course if this product was
assigned to only one contact, alternatively if it was assigned to several contracts, all of those contracts will appear as available sources of supplies).
When trying to create a Shopping Cart by selecting a Product from the Internal Goods/Services and adopting it to the SC the system will assign the contract as a source of supply for this Product.
All the above is an acceptable system behavior.
Now we start testing the use of SRM-MDM in order to replace CCM, the problems weu2019ve notice are:
1. A product B1 that was assigned to a Contract using CCM is add to a SC from SRM-MDM catalog (a different Web Service ID), the result was that no Source of Supply was assigned to the Product B1 in the SC although only one released Contract exist in the system for the selected product B1.
2. The Central Purchasing department created a NEW contract by selecting a product A1 from SRM-MDM catalog; the Web Service ID is MDM1 assigned to a Named Search MDM_NS_1 allowing the user to see all items in the catalog. Now an end user, who is restricted to view only a part of the items in the catalog, is creating a SC by selecting the product A1 from SRM-MDM catalog; the Web Service ID is RESTRICT_MDM1 assigned to a Named Search RESTRICT_MDM_NS_1 allowing the user to see only a
part of the items in the catalog, the result was that no Source of Supply was assigned to the Product A1 in the SC although only one released Contract exist in the system for the selected product A1.
I found that the problem is in FM BBP_PD_INDEX_FIND in form FUND_ITEMS_ANALYZE where there is a determination for a valid entries according to search criteria that one of those is the Catalog ID.
Please share your thoughts about this problem and how i can overcame it.
Kind Regards,
Raz
Edited by: Raz Golan on Feb 26, 2009 11:57 AM

Hi,
Use this also
SAP Note- 0000927215 Contract is not proposed as valid source of supply
Regards,
Sachin

Assign Source of supply is not working for contract with material group

Dear Experts,
I have searched all the threads and gone through before posting my query. So i would ask moderators to go through the thread properly before rejecting this.
We have value contracts with respect to a particular material group without material and with item category W in the contract item, Please note that for the materials with this material group, the source determination is not set and source list is also not maintained.
When we create PR for the material with this contract, and when we click on assign source of supply contracts used to get popped up, but recently from few days, when we click on assign source of supply we are getting an error " no source found for this item ".
Can anybody help on this.
Regards

@ Biju,
As mentioned earlier, we are not creating PR with reference to contract.
first we are creating contract with item category W (material group), without material and plant details.
we create PR with or without material with account assignment K and with the material group in the transaction ME51N, and after inputting all the fields, we click on assign source of supply, it was proposing the existing contracts with respect to material group earlier, but it is not happening for particular material group(it is working for all other material groups)
Hope it is clear.
@ Dev Patra,
we are using DIEN-Service material types and we assign that particular material group to only service material type.
we have not ticked, source list in the material master, we donot have any source list for the materials under that material group.( please check the note 457110- question number 14.)
Regards

Problem description: My iMac (early 2008) with OS 10.10.2 runs slow. I have run EtreCheck several times, and I am unable to move beyond Problem System Launch Agents (11 processes killed due to memory pressure) and Launch Daemons (12 processes killed

Problem description:
My iMac (early 2008) with OS 10.10.2 runs slow. I have run EtreCheck several times, and I am unable to move beyond Problem System Launch Agents (11 processes killed due to memory pressure) and Launch Daemons (12 processes killed).
EtreCheck version: 2.1.8 (121)
Report generated April 14, 2015 at 9:50:48 AM EDT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    iMac (24-inch, Early 2008) (Verified)
    iMac - model: iMac8,1
    1 3.06 GHz Intel Core 2 Duo CPU: 2-core
    4 GB RAM Upgradeable
        BANK 0/DIMM0
            2 GB DDR2 SDRAM 800 MHz ok
        BANK 1/DIMM1
            2 GB DDR2 SDRAM 800 MHz ok
    Bluetooth: Old - Handoff/Airdrop2 not supported
    Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
    NVIDIA GeForce 8800 GS - VRAM: 512 MB
        iMac 1920 x 1200
System Software: ℹ️
    OS X 10.10.2 (14C1510) - Time since boot: 4 days 20:29:22
Disk Information: ℹ️
    Hitachi HDS721010KLA330 disk0 : (1 TB)
        EFI (disk0s1) <not mounted> : 210 MB
        Mac iBook HD (disk0s2) / : 999.35 GB (521.60 GB free)
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
USB Information: ℹ️
    Apple Inc. Built-in iSight
    Apple, Inc. Keyboard Hub
        Apple, Inc Apple Keyboard
    Apple Computer, Inc. IR Receiver
    Apple Inc. BRCM2046 Hub
        Apple Inc. Bluetooth USB Host Controller
Configuration files: ℹ️
    /etc/sysctl.conf - Exists
Gatekeeper: ℹ️
    Mac App Store and identified developers
Problem System Launch Agents: ℹ️
    [killed]    com.apple.CallHistoryPluginHelper.plist
    [killed]    com.apple.CallHistorySyncHelper.plist
    [killed]    com.apple.coreservices.appleid.authentication.plist
    [killed]    com.apple.icloud.fmfd.plist
    [killed]    com.apple.Maps.pushdaemon.plist
    [killed]    com.apple.printtool.agent.plist
    [killed]    com.apple.SafariNotificationAgent.plist
    [killed]    com.apple.sbd.plist
    [killed]    com.apple.scopedbookmarkagent.xpc.plist
    [killed]    com.apple.telephonyutilities.callservicesd.plist
    [killed]    com.apple.warmd_agent.plist
    11 processes killed due to memory pressure
Problem System Launch Daemons: ℹ️
    [killed]    com.apple.AssetCacheLocatorService.plist
    [killed]    com.apple.ctkd.plist
    [killed]    com.apple.emond.aslmanager.plist
    [killed]    com.apple.icloud.findmydeviced.plist
    [killed]    com.apple.ifdreader.plist
    [killed]    com.apple.nehelper.plist
    [killed]    com.apple.nesessionmanager.plist
    [killed]    com.apple.periodic-daily.plist
    [killed]    com.apple.periodic-weekly.plist
    [killed]    com.apple.softwareupdate_download_service.plist
    [killed]    com.apple.wdhelper.plist
    [killed]    org.cups.cupsd.plist
    12 processes killed due to memory pressure
Launch Agents: ℹ️
    [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
    [running]    com.adobe.AdobeCreativeCloud.plist [Click for support]
Launch Daemons: ℹ️
    [loaded]    com.adobe.fpsaud.plist [Click for support]
    [loaded]    com.adobe.SwitchBoard.plist [Click for support]
    [running]    com.arubanetworks.via.NetworkMonitorLaunchd.plist [Click for support]
    [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
User Launch Agents: ℹ️
    [loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
    [loaded]    com.adobe.ARM.[...].plist [Click for support]
    [loaded]    com.adobe.ARM.[...].plist [Click for support]
    [loaded]    com.google.keystone.agent.plist [Click for support]
    [running]    com.spotify.webhelper.plist [Click for support]
User Login Items: ℹ️
    ChronoSyncBackgrounder    Application (/Library/Application Support/ChronoSync/ChronoSyncBackgrounder.app)
    Dropbox    Application (/Applications/Dropbox.app)
    Canon IJ Network Scanner Selector2    Application Hidden (/Library/Printers/Canon/IJScanner/Utilities/Canon IJ Network Scanner Selector2.app)
    Google Drive    Application (/Applications/Google Drive.app)
Internet Plug-ins: ℹ️
    Google Earth Web Plug-in: Version: 6.1 [Click for support]
    Default Browser: Version: 600 - SDK 10.10
    AdobeExManDetect: Version: AdobeExManDetect 1.1.0.0 - SDK 10.7 [Click for support]
    Flip4Mac WMV Plugin: Version: 3.1.0.24   - SDK 10.8 [Click for support]
    OVSHelper: Version: 1.1 [Click for support]
    AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 [Click for support]
    AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Click for support]
    DivX Web Player: Version: 3.2.4.1250 - SDK 10.6 [Click for support]
    FlashPlayer-10.6: Version: 17.0.0.134 - SDK 10.6 [Click for support]
    Flash Player: Version: 17.0.0.134 - SDK 10.6 Outdated! Update
    iPhotoPhotocast: Version: 7.0
    QuickTime Plugin: Version: 7.7.3
    SharePointBrowserPlugin: Version: 14.4.8 - SDK 10.6 [Click for support]
    AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Click for support]
    Silverlight: Version: 5.1.20913.0 - SDK 10.6 [Click for support]
    JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
User internet Plug-ins: ℹ️
    WebEx: Version: 1.0 [Click for support]
    Google Earth Web Plug-in: Version: 7.1 [Click for support]
3rd Party Preference Panes: ℹ️
    Adobe Version Cue CS2 [Click for support]
    Flash Player [Click for support]
    Flip4Mac WMV [Click for support]
    VIA PrefPane [Click for support]
Time Machine: ℹ️
    Time Machine not configured!
Top Processes by CPU: ℹ️
         3%    WindowServer
         3%    Mail
         2%    com.apple.iCloudHelper
         1%    Creative Cloud
         1%    Google Chrome
Top Processes by Memory: ℹ️
    223 MB    Google Chrome
    150 MB    Finder
    129 MB    Google Chrome Helper
    112 MB    Mail
    69 MB    Google Drive
Virtual Memory Information: ℹ️
    35 MB    Free RAM
    1.45 GB    Active RAM
    1.45 GB    Inactive RAM
    888 MB    Wired RAM
    27.01 GB    Page-ins
    851 MB    Page-outs

When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

Problem when creating contract with foreign trade / customs

Hi,
I encountered a problem when creating contract / outline agreement.
I used ME31K to create a contract with a vendor outside of our country. I suppose that I should be able to see "Foreign Trade / Customs" in "Header" menu, but this entry is gray, I cannot enter it.
I tried to create a scheduling agreement using ME31L with the same vendor and material, I can see "Foreign Trade / Customs" information. I suppose these two process are similar, aren't they?
Btw., I checked the master data according to this thread:
http://help.sap.com/saphelp_46c/helpdata/en/ed/3b6cc697e711d1b4e20000e82d81b0/content.htm
Can anyone give me some hint?
Thanks!
Charlie

These two processes are different:
The Contract agreement or the Outline Agreement is that create the centrally contract (cross-plant) where it can maintain different pricing conditions for each and every plant. It creates the Release Order with reference to Outline Agreement. No detailed delivery schedule can be made in the Release Order. No Release documentation is created. Only time-dependent conditions can be created, Some Item Category 'M' and 'W' can be used.
Whereas the Scheduling Agreement is the Plant Location what must be entered in the Scheduling Agreement. Its no need to create any other purchasing document except for delivery schedule line via Transaction ME38 or MRP running (with the appropriate setting of Source List). Delivery Schedule line items are created subject to your specific requirement. It can create both Scheduling Agreement with or without release of Documentation (subject to the Document Type LP or LPA) with the selection of either FRC or JIT delivery schedule. Either time-dependent or time-independent conditions can be created subject to the customizing in the Document Type of the Scheduling Agreement. Item Category 'M' and 'W' can not be used.

Problem with severe connection fail and slow inter...

Havin problem with several automatic disconnection, slow internet and cant get inside online bt repair centre coz its sayin - this no is not provided by bt business...
ADSL Line Status
Connection Information
Line state: Connected
Connection time: 2 days, 06:57:44
Downstream: 1.122 Mbps
Upstream: 80 Kbps
ADSL Settings
VPI/VCI: 0/38
Type: PPPoA
Modulation: G.992.5 Annex A
Latency type: Interleaved
Noise margin (Down/Up): 4.0 dB / 7.2 dB
Line attenuation (Down/Up): 65.0 dB / 34.6 dB
Output power (Down/Up): 19.1 dBm / 10.0 dBm
FEC Events (Down/Up): 9019906 / 503
CRC Events (Down/Up): 656 / 131
Loss of Framing (Local/Remote): 0 / 0
Loss of Signal (Local/Remote): 0 / 0
Loss of Power (Local/Remote): 0 / 0
HEC Events (Down/Up): 5492 / 23
Error Seconds (Local/Remote): 62 / 33

as you are a business user you need to post on the business forum https://business.forums.bt.com/
this forum is for residential customer
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

BAPI for assigning A contract with Assortment

Hi all,
Can any one gimmie the name of the BAPI that is used to Assign a contract with Assortment with the given Contract id and Assortment ID.The transaction used is VA42.
Points are waiting.
Regards,
Ravi K.

Hi,
Check with these function modules one will work.
bapi_assortment_maintain
bapi_assortmentlist_getgroup
bapi_assortmentlist_gethead
bapi_assortmentlist_getpos
regards,
ms

Problems in assignment of a contract with several Items to orders.

Similar Messages

Maybe you are looking for