Problems moving app from tomcat 321 to 4.0

I have serious problems moving an old app from tomcat 321 to 4.0. I tried just moving the entire webapps/<myApp> to the new server, and also using a war-file, but I get a message saying that one of my Beans doesn't exist.
Its a bean in the /WEB-INF/classes subdir, so its in an annonymous package. The jsp-page accessing it uses the
<jsp:useBean id="dateBean" class="DateBean" scope="session" />
tag.
Error message from jsp-page says: org.apache.jsp.DateBean not found.
Seems my tomcat4 doesn�t use the web-inf/classes in its classpath???
regards
Markus

I don't believe the current Servlet specs allow for anonymous packages. Try moving your class into its own package (under WEB-INF/classes/packagename/) and see if that fixes the problem. Also be sure to change the <jsp:useBean> tag to give the full classname in the class attribute.

Similar Messages

I am having a problem moving files from a iMac in location mac in another location. I have tried using Dropbox and the Public folder in the i disc. When I drag the files into dropbox they become alias' and I can't open them at the other end beca

I am having a problem moving files from an imac in one location to an imac inanother location. I have tried using Dropbox which is installed in both locations but when i drad a file ino yhe app it becomes an alias. When I get to the other location it says I can't open the file because the " original application that created it is not present". This is despite the fact that the app that created both files is installed in both computers. If I use the Public folder in the idisc, when I get to the other location the file isn't there. Am I forgetting to turn something on or off? Should I manually sync the Public folder and if so how? Thanks
Message was edited by: stephenfromdelray beach

So now that's two of us. Hopefully, someone has an answer.

Problems moving distribution from one environment toanother

Hi all,
Problems moving distribution from one environment to another
Initially we have the environment as below:-
Production :-
Server1 : AIX Environment manager (dealing with conductor, web, db)
Server2 : NT Node manager (dealing with outlook)
Development :-
Server3 : NT Environment manager (dealing with conductor, web, db)
Server4 : NT Node manager (dealing with outlook)
Currently, we intended to change the production environment via
changing the Server1 to Server3, as the new environment
manager, while the node manager unchanged.
Things that we've done in Server2, the node manager for
production environment:-
1) Pointing to Server3 instead of Server1, by changing Forte
Control Panel and changing registry entry.
2) Re-deploy the needed libraries in the new environment, so
that it can has the updated version.
3) Re-olegen the vb component.
4) Re-deploy the whole application.
However, we're facing the following problems/error messages
for the newly deployed Forte application:
1) Failed to bind to object named (/wfuseraccessobj/odbso/1)
2) Failed to bind to object named (/wfuseraccessobj/emailso/1)
These errors are actually refer to the libraries that used by
Conductor in order to perform database retrieval, and emailing
functions. These functions were worked properly in the initial
environments.
NOTE: The first error could be okay when refreshing the internet browser
(as our system is a web-based system), somehow it keeps on occurring every
now and then.
Please advice on this matter and reply ASAP as the project
delivery is crucial for our side.
Errors:
ERROR 1:
registering agent anchor /WorkFlow/centrale/lmseng/Agents/EngineUnit_Unit1
Attached to manager for node CHARON.
23-Nov-1999 17:38:32: EngineShell.SetEngine: Unit1: changing engine state
to
ONLINE
23-Nov-1999 17:38:32: EngineShell.SetEngine: Unit1: trying to remove old
shell anchor
23-Nov-1999 17:38:32: EngineShell.SetEngine: Unit1: creating engine object
23-Nov-1999 17:38:32: EngineShell.SetEngine: Unit1: engine object created
23-Nov-1999 17:38:32: EngineShell.SetEngine: Unit1: attaching database
service
23-Nov-1999 17:38:33: EngineShell.SetEngine: Unit1: connected to database
23-Nov-1999 17:38:33: EngineShell.SetEngine: Cold-starting engine... 0
23-Nov-1999 17:38:35: EngineShell.SetEngine: Unit1: registering shell
anchor
23-Nov-1999 17:41:31: Build: Exception raised of type ProtectionException
and severity 3: An user exception caught in ValidateUser().
23-Nov-1999 17:41:33: Build: Exception raised of type ProtectionException
and severity 3: An user exception caught in ValidateUser().
23-Nov-1999 17:41:34: Build: Exception raised of type ProtectionException
and severity 3: An user exception caught in ValidateUser().
23-Nov-1999 17:41:34: Build: Exception raised of type ProtectionException
and severity 3: An user exception caught in ValidateUser().
23-Nov-1999 17:42:54: Build: Exception raised of type ProtectionException
and severity 3: An user exception caught in ValidateUser().
23-Nov-1999 17:42:56: Build: Exception raised of type ProtectionException
and severity 3: An user exception caught in ValidateUser().
ERROR 2:
registering agent anchor /WorkFlow/centrale/lmseng/Agents/EngineUnit_Unit1
Attached to manager for node CHARON.
13-Oct-1999 16:45:40: EngineShell.SetEngine: Unit1: changing engine state
to
ONLINE
13-Oct-1999 16:45:40: EngineShell.SetEngine: Unit1: trying to remove old
shell anchor
13-Oct-1999 16:45:40: EngineShell.SetEngine: Unit1: creating engine object
13-Oct-1999 16:45:40: EngineShell.SetEngine: Unit1: engine object created
13-Oct-1999 16:45:40: EngineShell.SetEngine: Unit1: attaching database
service
13-Oct-1999 16:45:43: EngineShell.SetEngine: Unit1: connected to database
13-Oct-1999 16:45:43: EngineShell.SetEngine: Cold-starting engine... 0
13-Oct-1999 16:45:47: EngineShell.SetEngine: Unit1: registering shell
anchor
13-Oct-1999 16:49:58: Build: Exception raised of type ActivityException and
severity 3: A TOOL execution exception caught in ReadyAction().
13-Oct-1999 16:49:58: Build: Exception raised of type ActivityException and
severity 3: Exception in activity TempReview (4) will cause an abort of
process LMSPD (10).
SYSTEM ERROR: Exception in activity TempReview (4) will cause an abort of
process LMSPD (10).
Class: ErrorException
Error #: [2, 122]
Detected at: OfferedActivity.Activity.AbortProcessInException()
Error Time: Wed Oct 13 16:49:58
Exception occurred (locally) on partition "WFEngineUnit_cl1_Part1",
(partitionId = E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913, taskId =
[E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913.138]) in application
"WFEngineUnit_cl1", pid 2441 on node CHARON in environment centrale.
INFORMATION: Stack Trace for Exception:
No 4gl Traceback
Class: qqsp_ErrorDescriptor
Error Time: Wed Oct 13 16:49:58
Exception occurred (locally) on partition "WFEngineUnit_cl1_Part1",
(partitionId = E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913, taskId =
[E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913.138]) in application
"WFEngineUnit_cl1", pid 2441 on node CHARON in environment centrale.
SYSTEM ERROR: A TOOL execution exception caught in ReadyAction().
Class: ErrorException
Error #: [2, 107]
Detected at: OfferedActivity.ReadyAction
Error Time: Wed Oct 13 16:49:58
Exception occurred (locally) on partition "WFEngineUnit_cl1_Part1",
(partitionId = E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913, taskId =
[E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913.138]) in application
"WFEngineUnit_cl1", pid 2441 on node CHARON in environment centrale.
INFORMATION: Stack Trace for Exception:
No 4gl Traceback
Class: qqsp_ErrorDescriptor
Error Time: Wed Oct 13 16:49:58
Exception occurred (locally) on partition "WFEngineUnit_cl1_Part1",
(partitionId = E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913, taskId =
[E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913.138]) in application
"WFEngineUnit_cl1", pid 2441 on node CHARON in environment centrale.
SYSTEM ERROR: The attribute firstReviewerID is not available in this
accessor.
Class: qqsp_UsageException with ReasonCode: SP_ER_PARAMETERERROR
Error #: [15, 1206]
Detected at: AttributeAccessor.AttributeAccessor.Find()
Last TOOL statement: method TempReview.OnReady
Error Time: Wed Oct 13 16:49:58
Exception occurred (locally) on partition "WFEngineUnit_cl1_Part1",
(partitionId = E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913, taskId =
[E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913.138]) in application
"WFEngineUnit_cl1", pid 2441 on node CHARON in environment centrale.
Begin Stack Backtrace
==========================================================
Trace caused by a segmentation or access violation in the Forte executable:
Application: WFEngineUnit_cl1
Platform: PC / NT
Partition: WFEngineUnit_cl1_Part1
Generated: 02-Jun-1998 19:10:20
By: ftexec Version 3.0.G.2
Fault at 13-Oct-1999 16:49:58, pid '2441', node 'CHARON':
User Name: SYSTEM
Machine Name: CHARON with 2 CPU(s)
OS version 4.0
Loading symbols for ...
d:\forte\install\bin\QQCT.dll
d:\forte\install\bin\QQSH.dll
d:\forte\userapp\wfengine\cl1\wfengi1.exe
d:\forte\install\bin\QQKN.dll
d:\forte\install\bin\QQSM.dll
d:\forte\install\bin\QQDO.dll
d:\forte\install\bin\QQCM.dll
d:\forte\install\bin\QQRT.dll
d:\forte\userapp\ofcustom\cl0\libofcus.dll
d:\forte\install\bin\QQHD.dll
d:\forte\install\bin\QQDB.dll
d:\forte\install\bin\QQDS.dll
d:\forte\install\bin\QQDD.dll
d:\forte\userapp\wfcustom\cl0\libwfcus.dll
d:\forte\userapp\wfenvdef\cl1\libwfenv.dll
d:\forte\install\bin\QQEM.dll
d:\forte\install\bin\QQFO.dll
d:\forte\install\bin\qqtlnt.dll
d:\forte\install\bin\w3tpwss.dll
C:\WINNT\System32\rpcltc1.dll
C:\WINNT\System32\comctl32.ocx
d:\forte\install\bin\QQRP.dll
C:\WINNT\System32\OLEPRO32.DLL
C:\WINNT\System32\WINSPOOL.DRV
C:\WINNT\System32\MFC40.DLL
C:\WINNT\system32\OLEAUT32.dll
C:\WINNT\System32\rnr20.dll
C:\WINNT\System32\IMM32.dll
C:\WINNT\system32\msafd.dll
C:\WINNT\System32\wshtcpip.dll
C:\WINNT\System32\WS2HELP.dll
C:\WINNT\System32\WS2_32.dll
C:\WINNT\System32\WSOCK32.dll
C:\WINNT\System32\MSVCRT40.dll
C:\WINNT\system32\COMCTL32.dll
C:\WINNT\system32\ole32.dll
C:\WINNT\system32\SHELL32.dll
C:\WINNT\system32\comdlg32.dll
C:\WINNT\system32\ADVAPI32.dll
C:\WINNT\system32\RPCRT4.dll
C:\WINNT\system32\USER32.dll
C:\WINNT\system32\GDI32.dll
C:\WINNT\system32\KERNEL32.dll
C:\WINNT\System32\ntdll.dll
C:\WINNT\system32\MSVCRT.dll
C:\WINNT\System32\MSVCIRT.dll
Stack backtrace ...
wfengi1 004edd89 (017bb4f0,019e85e0,046bfe34,016a0c08)
wfengi1 004e29d1 (017bb4f0,019f1fc0,00000000,00f039d0)
wfengi1 004e2ecb (017bb4f0,00000024,019e85e0,019f1f98)
wfengi1 004e4503 (017bb4f0,019e85e0,01a20025,01a22868)
QQKN 005dc66f (017bb4f0,019e85e0,019f0025,01a22848)
QQKN 005df7a5 (017bb4f0,019e85e0,01a22890,01a22848)
QQKN 00697109 (017bb4f0,00000000,00f039d0,00f039d0)
QQSH 0027c47b (017bb4f0,0161b9d8,00000000,017bb4f0)
QQKN 0067f24f (01619c14,017bb4f0,f34a8eb8,046bffb8)
QQKN 0067e2d5 (01619c14,00000000,00000000,00f039d0)
MSVCRT 780099ed (00f039d0,00000000,00000000,00f039d0)
KERNEL32 77f04f2c (78009990,00f039d0,00000000,00905a4d)
QQCT 00000000 (00000000,00000000,00000000,00000000)
End of Stack Backtrace
=========================================================
13-Oct-1999 16:50:10: Build: Exception raised of type TimerException and
severity 3: Exception in timer OneWorkingDayTimer (3) will cause an abort
of
process LMSPD (10).
SYSTEM ERROR: Exception in timer OneWorkingDayTimer (3) will cause an abort
of process LMSPD (10).
Class: ErrorException
Error #: [8, 111]
Detected at: ElapsedTimer.PTimer.FinishExpiration()
Error Time: Wed Oct 13 16:50:10
Exception occurred (locally) on partition "WFEngineUnit_cl1_Part1",
(partitionId = E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913, taskId =
[E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913.138]) in application
"WFEngineUnit_cl1", pid 2441 on node CHARON in environment centrale.
INFORMATION: Stack Trace for Exception:
No 4gl Traceback
Class: qqsp_ErrorDescriptor
Error Time: Wed Oct 13 16:50:10
Exception occurred (locally) on partition "WFEngineUnit_cl1_Part1",
(partitionId = E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913, taskId =
[E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913.138]) in application
"WFEngineUnit_cl1", pid 2441 on node CHARON in environment centrale.
FATAL ERROR: System segmentation/access violation caught.
Class: qqos_SystemException
Error #: [101, 321]
Detected at: qqos_MainExFilter at 1
Error Time: Wed Oct 13 16:50:10
Exception occurred (locally) on partition "WFEngineUnit_cl1_Part1",
(partitionId = E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913, taskId =
[E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913.138]) in application
"WFEngineUnit_cl1", pid 2441 on node CHARON in environment centrale.
ERROR: qqlo_LomTaskInitiator::Run: Asynchronous task exiting:
The following error was not on the error stack:
FATAL ERROR: System segmentation/access violation caught.
Class: qqos_SystemException
Error #: [101, 321]
Detected at: qqos_MainExFilter at 1
Error Time: Wed Oct 13 16:50:10
Exception occurred (locally) on partition "WFEngineUnit_cl1_Part1",
(partitionId = E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913, taskId =
[E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913.138]) in application
"WFEngineUnit_cl1", pid 2441 on node CHARON in environment centrale.
ERROR: TMgr.Terminate: fatal error terminated partition

Lori,
Yes. I organize all my film rolls by name. If I import new pictures that don't fit into an existing film roll name I create a new film roll with a name appropriate to the theme of the new pictures. No problem with this.
However, if I import pictures at a later date that I want to move to an existing film roll, there is a problem if scrolling is required to bring the existing film roll into view in the display pane.
For example, I have a film roll called "Flowers & Plants". I later import a roll that contains some pictures that I want to move to the Flowers & Plants roll. The Flowers & Plants roll is not visible in the display pane so scrolling is necessary. I select and drag the new pictures up (the new film roll is always at the bottom of the display pane) to reveal the Flowers & Plants film roll. However, the film rolls scroll by so fast it is virtually impossible to stop on the Flowers & Plants roll's title bar.
This was not a problem with earlier versions of iPhoto on slower Macs. I really appreciate the much improved iPhoto/Mac performance but I wish there were some way to control this aspect.
I hope this helps.
Thanks.
Mike

I am having problems moving music from my computer to my IPhone.

I am having problems moving music from my library to my IPhone. I have everything marked properly and it still won't move to my phone. Any suggestions?

What exactly happens when you try to sync?
Was the iPod previous synced to another iTunes library/computer?
Have you successfully synced from this iTunes library/computer before?
If so have you done anything like update iTunes on the computer since it last successfully synced?
Do the songs play in iTunes?
Does any media now sync to the iPod?
Do you have the right boxes checked to sync?
iTunes: Syncing media content to iOS devices and iPod
Try syncing using the manual method
Managing content manually on iPhone, iPad, and iPod

Problems downloading apps from the store 6/16/2013

Is anyone having problems downloading apps from the store? I am receiving a connection failed:invoke error.
Appreciate any assistance.
Thank you.

I have no idea what that means but try closing the App Store, and reboot your iPad. See if that helps.
Go to the home screen first by tapping the home button. Double tap the home button and the recents tray will appear with all of your recent apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the App Store icon. Tap the home button.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

Am having problems buying app from App Store ... It's not recognizing my credit card security code... It's says " incorrect code" any help pls wot do I do

Am having problems buying app from App Store ... It's not recognizing my credit card security code... It's says " incorrect code" any help pls wot do I do

This can be caused by a few things.
      Make sure the billing card address, the one on the statement is the exact
             same as in iTunes.
      Note even the zip code being off can cause this.
       Try a different CC
      and the way the always works
          An iTunes GC.

Moving app from one screen to another fails very often

I'm using the feature to manually move apps from one screen to another on iPhones. It works very smooth without any problem on these devices.
On my iPad 3 I've some trouble with that feature. 1 out of 20 tries works. It makes no difference if moved slow, fast or concentrated - it fails too often.
Spoken with other people using iPad leads to the results the problem also exists on iPad 2. So what happens? You switch to edit mode by holding the "Home" button and wait until the apps are vibrating. Now you put a finger over an app, hold them and move them to the right or left display border. Instead of switching to the next screen the icon jumps back to it's original position. Different people tried it on my iPad and all of them failed in the given rate.
Workaround is to use the shortcut bar on the bottom or to use iTunes from Mac or PC. I've also noticed that most of the time a "close" request of an application (by hitting the "-" sign on an app icon) failed if the app is on the border of the display. This happens randomly and you feel you missed the "-" sign so repeating the operation. But if you concentrate on it you will notice it doesn't respond properly.
As a result my impression is the touchscreen functionality is not as good as on iPhone. Where I have no problem at all with both operations. As other people also suffer from this issues it must be related to the iPad screen.

Yes by restoring the iPhone from the backup of the Pod. The app has to be in the iTunes library of the computer on which you do the restore.

Problems moving files from old start-up following upgrade prep :(

So I thought I would do a clean Leopard install ahead of moving up to 10.6...
Bought a new 1TB SATA drive, 10.5 installed and updated, all apps installed, no problems. I did create a new user account rather than migrating - sounds silly but I wanted a completely clean slate as I've been upgrading this system and carrying the user account forward forever...
Now I am trying to copy my DTP files across from the previous boot drive and I don't seem to have permissions over them, even though 'Get info' says I do.
E.g. moving them from folder to folder does a copy rather than a move, and more often than not needs a password.
Any got suggestions for the best practice approach to move files between SATAs, when the two drives have different accounts, etc? I am wary of the ACLs, changing permissions and screwing things up...
Thanks v much

If you can you connect both external drives to the computer at the same time, it would be easier to use the "Consolidate Library" utility in iTunes to move (actually copy) your media to the new drive.
1- Open iTunes preferences and select the Advanced tab. Change the location of your iTunes music folder to a location on your new drive. Also select the options "Keep iTunes music folder organized" and "Copy files to iTunes music folder when adding to library". Close the preferences dialog.
2- On the iTunes menu, select Advanced/Consolidate Library. This will gather all your media and copy it to the new location (the folder you designated in step 1).
3- After the consolidation is complete, verify that your music still plays, and check "Get Info" on some items to verify that iTunes is looking at the new location.
4- Optional. Delete the original files on your external drive. Do this only if you are certain that everything copied over to the new drive.
5- Optional. Close iTunes and locate your "iTunes Library.itl" file. This is typically in your iTunes folder, which may be on your computer's drive and not the external drive. Move this file to somewhere on your new external drive. Next, hold the Shift key as you launch iTunes and you'll be prompted to "Create Library" or "Choose Library". Select "Choose Library" and navigate to where you put the "iTunes Library.itl" file. This is a one-time step that tells iTunes where to boot the library from.

Problem porting app from FMS2 to FMS3

Hi all,
I've been trying to port a flex app from FMS2 to FMS3 and I'm
having a huge issue. It is a video conferencing app and it works
just fine in FMS2, but once in FMS3, whenever more than 3 people
try to login, I get a "NetStream.Publish.BadName" error. The stream
names are definitely different. That said, when I open up FMS3, I
see a whole bunch of "extra" streams with garbage names, that are
clients of the streams I created. I believe these garbage names
start to conflict after the third user. What do I do to fix this?
While I can't post code due to company policy, this sample on
the web also exhibits the same issues, and does the connections
very similar to me.
http://www.mydattoli.com/test/DCCVideoConference/main.html#
Also, I am using Flex 3, with AMF3 turned on. If someone
could point me in the right direction, it would be greatly
appreciated.
Thanks,
Jason

Hi,
thanks for your reply. I have another query. Think there are some problems with backward compatibility issues with JDK. I mean code running in JDK 1.2 don't run in JDK 1.4. Also JRUN4 has some problems running with JDK 1.4 and when downgraded to JDK 1.3, it works. Is TOMCAT server compatible with all versions of JDK, so that if JRUN is replaced with TOMACAT and IIS, the application wud run fine with all versions of JDK? Thanks in advance. Please reply.. This is an urgent requirement for me.

Moving Apps from One Account to Another

When I moved to my new job I got a new phone. Not being sure what to do I set up a new BB Id with my new e-mail. Now I can't get my apps from my old account. How can I move those apps from my old account to my new one without having to pay for them again?

Hi and Welcome to the Community!
It is a matter of using that old BB ID...apps cannot transfer between BB IDs, but BB IDs can transfer between devices, carrying along their purchase records.
To re-install your apps, please see this KB:
KB17625 How to install or transfer previously purchased applications from BlackBerry App World to a BlackBerry smartphone
Given that you've already created a new BB ID on the new device, you may also need this KB:
KB26694 How to change the BlackBerry ID on a BlackBerry PlayBook tablet or BlackBerry smartphone
I'm sorry that the process will be so cumbersome, but it is what it is.
Cheers!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Moving Apps from PC to PC OS9

Have a question for everyone here, I have a MAC Quciksliver that has OS 9 and I want to move some of the Apps from that PC to a 2nd PC with a newly installed dual boot with OS 9 and OS X Tiger.
Some of the apps I want to move are Photoshop Illustrator and few more I can't think of, since I got the PC's used I don't have the install discs.
Can I just stick in a flash drive and copy the folders of the apps from the OS 9 app folder on the old pc and paste in the orther PC and expect it work?
Thanks for any help!

C F McBlob wrote:
You'd need to move the preferences from the System Folder as well, and you could run into permissions problems with that.
OS 9 does not use permissions, hence no permissions problems.
In addition to prefs files... - though rare, some apps have extensions associated with them, and it is necessary to also move those.

Problem loading applet from tomcat

I am facing a problem loading the batik applet from tomcat. I have placed all the jar files of batik in ROOT directory in tomcat. Along with the folder containing the batik applet. Still i receive the following exception when trying to load the html page containing batik applet.
Applet tag in html page is:
<applet codebase = "." code="batik_applet.BatikApplet.class" name="myApplet" width="1600" height="1200" hspace="0" vspace="0" align="middle" archive="batik-swing.jar,batik-gvt.jar,batik-bridge.jar,xml-apis-ext.jar,batik-css.jar,batik-util.jar,batik-dom.jar,batik-svg-dom.jar,batik-anim.jar,batik-awt-util.jar,batik-codec.jar,batik-ext.jar,batik-extension.jar,batik-gui-util.jar,batik-parser.jar,batik-script.jar,batik-svggen.jar,batik-transcoder.jar,batik-xml.jar,js.jar,pdf-transcoder.jar,xalan-2.6.0.jar,xerces_2_5_0.jar,xml-apis.jar">
</applet>
I already have a folder named batik_applet containing BatikApplet.class in the ROOT directory.
========Exception===========
network: Connecting http://localhost:8080/servlet/batik_applet/BatikApplet.class with proxy=DIRECT
network: Connecting http://localhost:8080/servlet/batik_applet/BatikApplet.class with cookie "JSESSIONID=1A75299B77372108560B4DF8DC65A3A6"
network: Connecting http://localhost:8080/servlet/batik_applet/BatikApplet/class.class with proxy=DIRECT
network: Connecting http://localhost:8080/servlet/batik_applet/BatikApplet/class.class with cookie "JSESSIONID=1A75299B77372108560B4DF8DC65A3A6"
load: class batik_applet.BatikApplet.class not found.
java.lang.ClassNotFoundException: batik_applet.BatikApplet.class
     at sun.applet.AppletClassLoader.findClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadCode(Unknown Source)
     at sun.applet.AppletPanel.createApplet(Unknown Source)
     at sun.plugin.AppletViewer.createApplet(Unknown Source)
     at sun.applet.AppletPanel.runLoader(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Caused by: java.io.IOException: open HTTP connection failed.
     at sun.applet.AppletClassLoader.getBytes(Unknown Source)
     at sun.applet.AppletClassLoader.access$100(Unknown Source)
     at sun.applet.AppletClassLoader$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     ... 10 more
basic: Exception: java.lang.ClassNotFoundException: batik_applet.BatikApplet.class
Any help would be appreciated.

Assuming that your applet is not in a jar file (don't see a value for archive)
you have a file callsed ProcessStatus.class in a folder WEB-INF\classes relative to
the location of the jsp file.
So if the jsp file is in
myJSPFileFolder
the class should be in:
myJSPFileFolder\WEB-INF\classes
If you want to see when the jre is trying to load and where it it trying to load it from you
can inspect a full trace, to turn the full trace on (windows) you can start the java console, to be found here:
C:\Program Files\Java\j2re1.4...\bin\jpicpl32.exe
In the advanced tab you can fill in something for runtime parameters fill in this:
-Djavaplugin.trace=true -Djavaplugin.trace.option=basic|net|security|ext|liveconnect
if you cannot start the java console check here:
C:\Documents and Settings\userName\Application Data\Sun\Java\Deployment\deployment.properties
I think for linux this is somewhere in youruserdir/java (hidden directory)
add or change the following line:
javaplugin.jre.params=-Djavaplugin.trace\=true -Djavaplugin.trace.option\=basic|net|security|ext|liveconnect
for 1.5:
deployment.javapi.jre.1.5.0.args=-Djavaplugin.trace\=true -Djavaplugin.trace.option\=basic|net|security|ext|liveconnect
The trace is here:
C:\Documents and Settings\your user\Application Data\Sun\Java\Deployment\log\plugin...log
I think for linux this is somewhere in youruserdir/java (hidden directory)
The trace should show something like :
Caused by: java.io.FileNotFoundException: http://server/location/filename.class (The system cannot find the path specified)

Moving apps from one page to another

I am a new iPod Touch user and have accidentatlly moved one of my apps to a page of its own and want to move it back to the previous page of apps.
How do I move an app from one iPod Touch (2nd Generation) page to another page?

http://manuals.info.apple.com/enUS/iPod_touch_2.2_UserGuide.pdf
Page 18:
"Customizing the Home Screen
You can customize the layout of icons on the Home screen—including the Dock
icons along the bottom of the screen. If you want, arrange them over multiple Home
screens.
Rearrange icons:
1 Touch and hold any Home screen icon until the icons begin to wiggle.
2 Arrange the icons by dragging them.
3 Press the Home button to save your arrangement.
You can also add links to your favorite webpages on the Home screen. See “Web
Clips” on page 58.
Create additional Home screens: While arranging icons, drag an icon to the right
edge of the screen until a new screen appears. You can flick to return to the original
screen and drag more icons to the new screen.
"

Having some problems with apps froms the app store

Hello. Since I got my iTouch I've been having some problems with some apps. Some work perfectly fine, but some others are just crashing after a few seconds. I've tried everything I found, but it seems like my problem is different from the one related by lots of others iPod users. Here's a video a friend of mine who's having the same problems I am did showing it:
http://www.youtube.com/watch?v=MI-gBhP_cgU
It's really annoying us. Does anyone know how to fix it? Does it look like a firmware problem? Thanks in advance.

Have youy tried:
- Reset:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- iOS: Troubleshooting applications purchased from the App Store
- Restoring the iPod from backup
- Restoring the iPod to factory defaults/new iPod.

Migrating WebServices app from Tomcat to Glassfish...

Hello!
I've a WebService app. which now runs on Tomcat 5.5.23 and was written using JAX-WS. I've install Sun Java System App. Server 9.0 and I intend to migrate our app. here.
The application is delivered as a war file which I've already deployed in glassfish using admin GUI of asadmin. I can see our app. at WebApplications section but I can't see it under WebServices section, although it seems at a first view that the application works and respond to client's request.
I'd like to ask you if I need to use a special tool for migrating our aplication or what I did is enough and there is no need for other changes.
Thank you very much
With best regards,
Sorin

If I understand correctly, you are trying to load a few properties files on WLS that is specific to an application that you are migrating from tomcat to WLS. If that is the case, then as per my understanding we have the following options:
a. Add all the properties in a jar file and add the same to the classpath or place the same in the lib directory of the server which can be picked at the server start-up.
b. Place the properties file in the domain home which should help.
Refer: loading a new properties file without restarting the managed server
c. Else place the properties files in the web-inf of the application, that should help.

Problems moving app from tomcat 321 to 4.0

Similar Messages

Maybe you are looking for