Problems setting a forward mail address

Hi
On my mailserver I has my domain hosted as an virtual domain (have some others there too)
I have used workgroup manager to setup the user primary email on the virtual domain and everything works nice.
But, I want that mail on that account to be forwardet to my gmail account too, so I tried to edit the "/etc/postfix/virtual" on my server, and it worked fine, until I should add another user on the same virtual domain.
The mail for user 2 never came to the mailbox, so I checked the mail server logs, saying it rejected the mail for user2 because the mail was not in the "/etc/postfix/virtual" file.
I alsa got an warning saying I should not virtual alias and virtual mailboxes at the same time.
Can anyone help me configuring the forward right?

Hello,
I have exactly the same problem with Windows 2008R2 with P2000 and now on WIndows 2012 R2 with MSA2040 and 10Gbe interfaces.
On the W2K12R2 infra, I had been able to force my both path to optimized one time(I don't remember how :( ) and I saw the traffic load balanced beetween my both interfaces. But, after rebooting, my configuration wasn't kept and I had 1 optimized and the second
non-optimized. Like all my other servers connected to the same NAS.
For information my configuration is: HP MSA2040 SAN with 2 DAC connected (1 from controller A and the second from controller B) to SFP+ card on the server.
It has working temporaly.
Did anyone find an answer since 2012 ?
Thanks in advance. Best regards.

Similar Messages

Problem setting up smtp mail out .

Hi all you good people .
I am having a problem setting up the mail program . I'm using mail two under os-x leopard 10.5.7 . I have the pop mail working fine , but for some reason or another it wont send the mail out . I remember I got it working before , but it was a pain in the butt to do . So I ma forced to use Microsoft Entourage for my mail receiving and sending . I think Microsoft Takes more skill to use than the apple mail program .
I would love for someone to help me solve this . My mail server is from time warner . I use there High speed internet for my mail access .
P.S Roadrunner .

Hi,
I assume you are using Mail 3.6, and not "mail two"?
What Authentication are you using on this SMTP? If not already, try using None, and removing Password and Username from SMTP setup for at least one test. Most Roadrunner SMTP are authenticated by reference to the IP address of your Modem, and using a separate authentication of the SMTP results in failure.
Mail Preferences/Accounts/Account Information, then click on the arrows beside the name of the SMTP in the section on Outgoing Server. After you click on the arrows, choose Edit Server List. Then if the SMTP is set up with the correct name, etc, click on the Advance Tab, use Custom Port with Port 25, None as authentication, and do not enter any Username and Password. Under authentication of None, the name of the SMTP will not have your Username appended. This is the equivalent, after having previously done the set up, to those email clients with a setting to use the info of the Incoming for authentication.
Let us know, but Roadrunner can vary from area to area on this, but this is the way it seems to always work.
Ernie

Delivery problems with Apple Store mailing address

Hello all,
I just sent the following letter to Apple; I'm just wondering if anyone else has experienced the same problem (missing mailing address lines) ?
Dear Apple,
I'd like to point out a potential problem in Apple Store mailing addresses.
During the past two years, I have now witnessed three (3) separate occasions, where the shipping address I give in my Apple Store order does not correctly end up in the actual mailing label.
The most recent case was today, when I (by sheer luck) received my Logic Pro 7.2 upgrade. The address I originally gave in my order was like this:
John Doe
My Home Street 123
MyCompany Ltd.
Helsinki, 00440
Finland
The first line is my name, the second line the street address, the third line my company, and the last line city and zip code.
However, the address that was in the envelope goes like this:
John Doe
MyCompany Ltd.
Helsinki, 00440
Finland
So the problem is, that the street address never made it to the mailing label. The envelope came addressed to me and my company; no street address at all. Fortunately the local post office knew where to find us.
I've seen this happen at least two times before, and it's always either the company name or the street address that's missing. They are not only missing from the mailing label in the envelope, they are also missing from the actual Apple Delivery Note that's inside the package. So it seems, that somewhere in your mailing process (at least for Finland) one of the address lines simply gets deleted.
I haven't (yet) lost anything valuable, but I'm getting really uncertain if I have the courage to order anything more valuable from your web store.
I hope you can fix this A.S.A.P. (or at least remove the extra address line from the order form, so that users won't put any crucial information into it).
G5 Mac OS X (10.4.4)

You may want to give Apple a call directly in Finland at (358) 0800 96162. Posts in this forum won't usually get forwarded to the correct people, as this is merely a user to user support forum.
Brian

How can I set an e-mail address in business catalyst?

I would like to know how I can set an e-mail address in business catalyst?

So with the webBasics plan (5 included in creative cloud) I don't have any account.
I have to upgrade my hosting plan in webBasics+
Thank you Dave

I'm having problems changing my e-mail address to do my updates

I'm having problem changing my e-mail address and password to do my updates on my I-phone 4 s

Why are you trying to change your email address? Apps that are purchased with an Apple ID are forever locked to that Apple ID and cannot be changed or merged with any other Apple ID account. You need to use the Apple ID and password that the apps were purchased with to update them.

How to Set a Form Mail Address

I have a form all set up on a web page in DW and what it's
supposed to do, but I don't know where the field is to put my
e-mail address for the form to send the info to. I tried putting it
in "action", but that's not it as a test to see if I'd get anything
failed. So, where
do I put my e-mail?

There are only two ways to process form data -
1. Use mailto:[email protected] as the action of the form
2. Use a server-side scripting method to a) harvest the
form's data, b)
process it in some manner, e.g., enter it into a database, c)
formulate and
send an email to one or more email recipients, and d)
redirect the visitor
to some ending page
Method 1 is quite simple, and is also the least reliable. It
depends both
on your visitor having an email client already installed on
their computer -
this eliminates public computers, or home users without email
clients
installed (more and more it seems) - and on the installed
email client
responding to
the mailto call. It is not possible to use this method *and*
send the
visitor to a
thank you page as well.
Method 2a is the preferred method, since it eliminates the
problems of
method
1, but it means that you have to grapple with
server-scripting somehow (ASP,
CF, PHP, perl, etc.).
Method 2b would be to use some third-party form processing,
like
http://www.bebosoft.com/products/formstogo/.
You would have to decide which of these methods is best for
your needs,
but if it's Method 2a, then start by asking your host what
they provide for
form
processing. If it's 2b, then read their FAQ/instructions
carefully.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"DanMat6288" <[email protected]> wrote in
message
news:fm3p7l$517$[email protected]..
>I have a form all set up on a web page in DW and what
it's supposed to do,
>but
> I don't know where the field is to put my e-mail address
for the form to
> send
> the info to. I tried putting it in "action", but that's
not it as a test
> to see
> if I'd get anything failed. So, where
do I put my e-mail?
>

Setting up e-mail address

Hi, I have recently acquired a Blackberry 8300 smartphone 2nd hand as my previous phone broke and I'm due an upgrade soon so didn't see the point of buying a new one. I wiped the phone so I could put my information on and recently checked a post that if it wasn't for work purposes you didn't need a blackberry password to set up my personal e-mail address and the password was only for work related e-mails.
Can someone confirm if this is the case and also how I set it up otherwise as it just keeps asking for a password and wont let me add mine on without it. Your help will be greatly appreciated.
Rick
Solved!
Go to Solution.

Are you using the personal email setup icon?
It sounds like you are using the enterprise service option and you shouldn't be.
You need to call your carrier and ask to have THE BlackBerry Data Plan placed on your account.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

How to set up forwarded mail?

I have several email addresses associated with my personal domain name that I have, that I set up on my host as forwards/aliases so I don't actually check server for mail sent to those accounts.
In Apple Mail I want to be able to send out mail sometimes using these addresses and so I set up accounts for them in Mail/Prefs so they appear in the "From" drop down menu. Mail requires requires you enter "Incoming Mail Server" info for accounts you set up, which I don't know how to handle since there isn't a corresponding account on my webhost and some times Mail asks me for my password for these forwarded addresses, and there isn't one.
How do I set this up?

I assume that you want to be able to use the addresses of these domains as 'From' addresses but use the same outgoing server as you are using with your other mail?
For each domain name, follow this procedure:
Create a new account in Mail Preferences>Accounts, The Description can be anything convenient, the Email Address is that which you want to use, and enter your name. For Incoming Mail Server, Usere Name and Password enter any old garbage (the User Name garbage must be different for each of these accounts you set up).
Set up the Outgoing Mail Server the same as the one you normally use.
Now click on the 'Advanced' tab. Check 'Enable this account' but do not check 'Include when automatically checking for new messages' (or you will keep getting error messages on auto-checking. Note that if you manually 'Get all new mail' you will get error messages for these accounts).
Now the domain addresses will appear as options in the 'From' drop-down menu beneath the Subject field.
In Mail Preferences>Composing set 'Send new messages from' to 'Account of selected mailbox' and you should find that when replying the 'From' address matches the one the message was sent to.

Problems setting up 2nd email address

Ok so I followed all the help instructions for setting up a second email address and all is fine. I can send test emails to my first account and I receive them within the same inbox. But then I hit two roadblocks:
1.) When I reply to the test message it bounces back.
" (reason: 550 5.1.1 unknown or illegal alias"
2.) The password window keeps popping up. After entering my password I get "The POP server “pop-server.nyc.rr.com” rejected the password for user “(my new email account)”
What's going on???

These 4 email accounts are provided by who?
Your internet service provider or an email account only provider or a combination?
Any error message provided when the Mail.app checks these accounts for new messages and the same when attempting to send?
Port 587 is used for an SMTP server port which has nothing to do with receiving messages.

Problem setting up Yahoo Mail Plus

I am in the process of transitioning from Entourage to Apple Mail. I have successfully imported all of the mail from Entourage and have successfully set up my Gmail account in Mail. I am trying to set up my Yahoo Plus account (POP3) but when I get to the Outbound Mail Server screen, set up gets stuck.
I put in all of the smtp information along with my ID and password and I set the SSL and proper port check boxes that matches the Entourage account information but I just get a spinning gear and a message that Mail is trying to contact to the server but it never does.
I spent about an hour in a chat session with Yahoo tech support last night. They checked all of my settings and checked my account access via telnet and verified that everything is working fine. They have escalated this within their support organization but so far I have not heard anything from them.
The strange thing is that my Blackberry is sending and receiving my Yahoo mail without any problems and it was working fine with Entourage. I turned off the Entourage syncing to make sure the two desktop apps weren't hitting up against each other but that made no difference.
Has anyone else run into this issue and/or any suggestions on where to look next for a solution?
Thanks,
David

Hi. my English is very bad. sorry.
use "Mail 4.0" i configure yahoo account (free) and gmail too. and work perfect. first you need to configure yahoo account for access to pop (this is in you web account in config on yahoo.) and in Mail (app) only you need start and introduce your account ej.:
[email protected] and password.
the programs send message error. click continue and put in smtp.: "smtp.mial.yahoo.com"
and pop: "pop.mail.yahoo.com"
for gmail is: "smtp.gmial.com" and pop: "pop.gmial.com"
if you need more detail send me email.
good lock
Alv B.

Problems setting up my mail.

Just today I bought a new MacBook Pro. I am completely new to Mac computers, and while trying to set up the email ran into some difficulties. I can receive emails, but cannot send them. When attempting to send an email the following error message appears, "Cannot send message using the server promail.ptd.net." This is the same server in place for receiving mail. I have checked the email providers website for their instructions, and this is the server we should use for outgoing mail. I am running Mac OS X Snow Leopard.

You may have already done this, but if you are using Apple's Mail program, setting up the outgoing mail server is not as simple as it first appears. In Mail's Preferences, the Outgoing Server dropdown list includes, as the last item, "Edit Server List". If you select this, you will have more boxes to fill in according to your ISP's requirements for account information and, under the Advanced tab, authentication. In my experience, when outgoing mail is repeatedly rejected, it is usually an authentication problem.

Problems setting up POP mail accounts on E71

i am having problems to set up my POP email accounts on my E71. the first account works, but only retrieves email- it won't send any.
the secong POP account is a gmail account and i have set iit up but it won't even connect. if anyone knows, what are the correct setting for security (Ports) and port number? i used the same setting as in my laptop but it just won't connect on the E71.
Please help!

Have a look at these two links:
http://www.e71fanatics.com/2008/07/e71-gmail-how-to-set-up-imap-with-built.html
http://www.realgeek.com/setting-up-gmail-on-nokia-e71/
Either one of these should solve your problem.
By clicking the "Kudos!" or the "Solution?" button on the right you can say "Thank You" and you´ll show the author and others that the post is useful.
The day we stop improving is the day we stop being good.

Problems setting up e-mail in a new user account

I have had my Mac Pro for a couple of months and have accessed all my family's e-mail from my administrator login.
I have just created a user login for my wife and have transferred her mail account settings into her user account. Unfortunately though, when I attempt to retrieve her e-mail I get a 'password not recognised' or 'pop account unrecognisable' message. I have checked and double-checked the e-mail account settings; they are correct.
I am still able to receive her e-mails when using my login.
Any ideas??
Mac Pro Mac OS X (10.4.8)

1. If you haven't tried this already, just delete the user account entirely, and then try setting it up again.
2. To find the permissions file:
     a. hold down the option key
     b. go to the Go menu in the finder
     c. scroll down to Library and open it
     d. in Library, go to Containers/com.apple.mail/Data/Library/Preferences
     e. drag it to the trash and restart.
3. if that doesn't work, go to Applications/Utilities/Keychain Access. In the Keychain Access menu, do Keychain First Aid, and repair.
This should keep you busy for a while.

Set a e-mail address as Main adrress in composing mail

How do I do that?
I have my Yahoo address as main, so every time I compose a mail I have to change the "From" address.
I'd like to change the main from Yahoo to Me.com but I can't find the way to do that

thanks

Problem setting up new mail account

I think when I got my macbook about 3 years ago I must have tried to set up an account for the 'mail' application. I no-longer remember wither my user-name or my password. When I open the app it comes up with a window explaining that I will be given guide-lines on how to create a new account, however, no guidelines are given and it just wants me to enter my use name and password, which it then does not recognise (it seems to therefore assume that I already have an account rather than helps me to set one up). The ending of the user-name is already written in (and is unalterable, as it's outide the bit I type in) and is "@mac.com" even though my Apple ID ends in "@mac.co.uk" (as I am from the UK) - should any of the details for my mail account be the same as my Apple ID?
Would be grateful for some help!

Hi amiaba, and a warm welcome to the forums!
I can't quite tell what it's doing, but open Keychain Access in Applications>Utilities, click on your Keychain on the left, put .mac in the search bar, once you find it, double click on it and click show password.
If you have no mail in there try this with Mail quit.
Drag this file to the Desktop...
/Users/YourUserName/Library/Preferences/com.apple.mail.plist
Start Mail & see if it steps you through it.
Not sure on the .uk thing, but is Date & Time>Time Zone set to the UK?

Problems setting a forward mail address

Similar Messages

Maybe you are looking for