Problems setting up HP Officejet 8610
I just bought an HP Officejet 8610 and when I got to the step to calibration, it won't do it. I can't find out anything on my computer helpful. Can someone tell me what to do?
Thanks.
Turning off the printer, dsiconnecting from power source and reconnecting worked.
The reason I didn't do that in the first place is that the printer advised me that it could be damaged by turning off in the middle of calibration. I realised that it wasn't in the middle of calibration as it said it was at 0% of calibration, so I took the risk and tuned off/on. Thankfully it worked ok.
Similar Messages
-
Problem setting up HP Officejet 4215xi on network
Hi All!
I can't seem to get my Powerbook G4 (OS X 10.3.9) to "see" my printer on the network. The network is a PC based network, but I've had no problem connecting to the other computers. I tried to download the drivers from HP, and even used one of the links suggested here to set up my printer on my computer. Nothing has worked. If anyone out there has the same system, and is using their HP 4215 successfully, please let me know what you did!
Thanks,
NoreenNetwork printing/Windows printing only works with a driver that was meant for network printing. To use the OS X built-in CUPS network choices, you need a CUPS driver. For postscript printers, it's not an issue, because postscript is the native output of OS X, and can easily be routed to the various choices in Printer Setup.
Non-postscript printers are Very Different. Except for Brother, no manufacturer has provided CUPS drivers. Instead, what you get are Carbonized, OS9 legacy drivers, that have the comm protocol written into the driver (mostly USB). They can only print via local connection.
Short version - HP's driver doesn't do network printing.
Install hpijs and ESP ghostscript:
http://www.linuxprinting.org/macosx/hpijs/
Then follow this:
http://www.ifelix.co.uk/tech/3015.html -
HP Officejet 8610 copy problem second tray
Hi all,
I have purchased a HP Officejet 8610 for a couple off months. I have 2 trays and have the following problem. If I make a copy, I want that the printer take the second tray. I want this to set as default value.
When I go to the startpage of the printer (EWS) I can set that the default copy tray is tray 2. This works fine, until the printer is set off. When I set the printer back on, the setting is back too tray 1.
Have someone a solution? It's very annoying because the first tray is special paper....
Sorry for my bad english.
RegardsHello there! Welcome to the forums @Timoty ,
I read your post about how the tray selection for copies will revert back to tray one when you restart the printer.
I could be wrong however, maybe the printer is "disconnecting" and causing the change you selected to revert back to tray one as a default. I would suggest that you assign a static IP to ensure the connection holds the connection and could help in saving your preferences when you change them in the EWS.
Here is a link that will help you assign a static IP (Solution three): Printer Does Not Maintain Wireless Connection
Good luck to you! Thank you for posting in the community
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution! -
HP -Other hardware, printer - Null Fax - HP Officejet 8610
I recently update to Windows 8.1 from Windows 8 on a desk top machine. Everything went well until Windows is trying to install an update for this printer (HP Officejet 8610). It is getting error 8007002. I checked the Windows site to find a fix and found nothing that works. I did try a couple solutions that I found which did not resolve the error. Has anyone run into this error and if you did were you able to get it resolved? I would appreciate a solution if someone has it. Thanks.
This question was solved.
View Solution.Hi @beary_one
According to the Windows website "If you receive Windows Update error 80070490, it means that a file (CBS Manifest) that's needed to install updates is corrupt."
This seems to apply to different error codes, including 8007002
Please take a look at what I found: Windows Update error 80070490
It appears the reason the file is appearing as corrupt is because it is whats is referred to as a "ghost update". Basically a "ghost update" is an update that was for the device, but the device has more recent drivers which causes the update to keep failing. The only thing you can do is hide the update, or ignore it. Windows will keep trying to push it, but your printer doesn't need it. If it did need the update, it would install right.
Aside from there error, are you experiencing any issues printing, scanning, or using the HP software?
If so, running the Print and Scan Doctor could help. The HP Print and Scan Doctor is a free utility (tool) that helps to quickly resolve common printing, scanning and connectivity issues including but not limited to:
Connectivity:
USB: Verifies that the USB connection from your computer to the HP product is working correctly.
Network: Verifies that the network connection between your computer and your network is working correctly.
Device Status Test: Checks for device errors such as out of paper, paper jams, carriage stalls, and paper feed issues, and then provides instructions for fixing the error.
Driver Check: Checks for missing or corrupt driver files.
Device Manager: Checks for problems in Device Manager that would prevent printing.
Device Online: Checks if the product has been paused or set to offline, and then sets the status back to online if necessary.
Print Queue: Checks for and clears pending print jobs in the print queue (a log of print jobs waiting to print).
Port Match: Checks the port settings for the HP product.
Device Conflicts: Checks for conflicts with other drivers, such as other printer brands.
Ink Issues: Checks the cartridges and ink levels for issues that affect print quality.
Print Settings: Checks and adjusts the print quality settings.
Test Print: Prints a test page for print quality evaluation, and provides options for cleaning and aligning the printhead if necessary.
Scan Tests: Checks the scan mechanism, drivers, and registry entries.
Source:Try the HP Print and Scan Doctor for Windows
Click here to download and run the Print and Scan Doctor >>>>> > www.hp.com/go/tools
If that does not resolve the issue, post back and let me know if there are any symbols other than green check marks and what they are next to of course. The wrench is not always easy to spot as the wrench and the check mart are in the green circle.
If you see only green check marks (), the tool did not find any problems.
If you see green wrenches (), the utility identified an issue and corrected it automatically.
If you see yellow exclamation points (), the test failed and required user action, but the step was skipped.
If you see a red X (), follow the on-screen instructions to resolve the issue.
I look forward to hearing back from you.
I hope this puts your mind at ease
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP -
Officejet 8610 wired network error
I have just bought the above to replace a failed Officejet 8500 because they are the only printers I have ever found that will automatically duplex A5.
After installation, using exactly the same network cable and switch as the old printer, the new printer did not respond via a wired connection*. Wireless/USB is fine. Finally, after playing with all the manual settings the only one that has made it respond was changing Link speed from Auto to any manual setting (e.g. 100-Full).
*Connector lights flashes one during power-up and thereafter remain stubbornly off. Config page says Offline and no manual IP settings 'stick'.
I suspect a compatibility issue with our Dell PowerConnect 5548 switch and the HP Officejet 8610 software.
Does anyone have a clue what might be happening?Hi @EdPaine
May I ask, why are you using manual IP settings? If you disconnect the Ethernet cable from the router and reconnect it, what happens?
Running the Print and Scan Doctor might help. The HP Print and Scan Doctor is a free utility (tool) that helps to quickly resolve common printing, scanning and connectivity issues including but not limited to:
Connectivity:
USB: Verifies that the USB connection from your computer to the HP product is working correctly.
Network: Verifies that the network connection between your computer and your network is working correctly.
Device Status Test: Checks for device errors such as out of paper, paper jams, carriage stalls, and paper feed issues, and then provides instructions for fixing the error.
Driver Check: Checks for missing or corrupt driver files.
Device Manager: Checks for problems in Device Manager that would prevent printing.
Device Online: Checks if the product has been paused or set to offline, and then sets the status back to online if necessary.
Print Queue: Checks for and clears pending print jobs in the print queue (a log of print jobs waiting to print).
Port Match: Checks the port settings for the HP product.
Device Conflicts: Checks for conflicts with other drivers, such as other printer brands.
Ink Issues: Checks the cartridges and ink levels for issues that affect print quality.
Print Settings: Checks and adjusts the print quality settings.
Test Print: Prints a test page for print quality evaluation, and provides options for cleaning and aligning the printhead if necessary.
Scan Tests: Checks the scan mechanism, drivers, and registry entries.
Source:Try the HP Print and Scan Doctor for Windows
Click here to download and run the Print and Scan Doctor >>>>>>> www.hp.com/go/tools
If that does not resolve the issue, post back and let me know if there are any symbols other than green check marks and what they are next to of course. The wrench is not always easy to spot as the wrench and the check mart are in the green circle.
If you see only green check marks (), the tool did not find any problems.
If you see green wrenches (), the utility identified an issue and corrected it automatically.
If you see yellow exclamation points (), the test failed and required user action, but the step was skipped.
If you see a red X (), follow the on-screen instructions to resolve the issue.
I look forward to hearing back from you.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP -
Hp officejet 8610 fax sends out more pages than scanned - received partial output on remote end
Hp officejet 8610 fax sends out more pages than scanned - received partial output on remote end
Hi,
How long is a page on the sender side? If it is a long page like a legal page, it may end up in in 2 pages in the receiver side. Also check on the receiver end, if it is set to 'auto reduction - off' this may happen, try turning it "on".
Also if the sender page is not a long page, try observing the paper that is going into the ADF, it should be 1 page at a time, if pages goes into the ADF continueously, it suggest that ADF is could be faulty.
Set automatic reduction for incoming faxes (for HP printers only)
The Automatic Reduction setting determines what the printer does if it receives a fax that is too large
for the default paper size. This setting is turned on by default, so the image of the incoming fax is
reduced to fit on one page, if possible. If this feature is turned off, information that does not fit on the
first page is printed on a second page. Automatic Reduction is useful when you receive a Legal-size
fax and Letter-size paper is loaded in the main tray.
To set automatic reduction from the printer control panel
1. From the printer control panel display, touch and slide your finger across the screen and then
touch Setup.
2. Touch Fax Setup.
3. Touch Advanced Fax Setup.
4. Touch Automatic Reduction to turn on or off.
Please click the "Thumbs Up", to say thanks for helping!
Also, please consider marking my post as “Accept as Solution" if you feel my post solved your issue.
I work for HP -
How do I eject the flash drive from an Officejet 8610 after scanning a file into it.
I used the front panel controls of my Officejet 8610 to scan an image into a flash drive plugged into the front panel of the 8610.
The 8610 recognized the presence of the drive just fine, and placed the scanned image on it as desired.
But for the life of me, I cannot figure out how to do a controlled ejection of the flash drive. (I finally did a controlled power-down of the 8610 and removed the drive after the 8610 turned itself off.)
How do you do eject a flash drive from the front panel USB port?
This question was solved.
View Solution.@dcollins_mac
Thank you for your post on the hp.com forums regarding safely ejecting your USB flash drive. In our printers, to remove your USB flash drive, all you need to do is - remove the flash drive. There is really no other method needed. You will not harm the flash drive, printer or files.
Hope this helps.
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution -
Printing to Officejet 8610 from iPad Air
I just purchased an OfficeJet 8610 All-in-One. I can use it to print from my iPhone but not from my iPad Air.
The only way I can print from my iPad Air is to use the hp eprint app. Any suggestions?
Thanks
This question was solved.
View Solution.Hi,
You should also be able to print from your iPad air. Try restarting your ipad air and see if it then shows up in your list of avaialable printers - it's a simple fix that sometimes works.
"Although I work for HP, I'm speaking for myself and not on behalf of HP"
"Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution" -
Problems setting up username & password for SQL
Due to the outstanding advice I recieved from this excellent forum, I have managed to overcome my first problem with declaring a new Class.
This leads me to request help with my next biggest problem:
Setting up a user GUI that takes a "username" & "password" that will be used to access a password protected database.
I am a simple bloke, with simple thought processes, so please, go easy on me...
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import java.sql.*;
public class DBQuery1 {
String username = "" , password = "";
public static void main(String[] arguments) {
PassDB UPass = new PassDB();
String data = "jdbc:odbc:JavaTestDataBase";
try {
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
Connection conn = DriverManager.getConnection(data, "" + username, "" + password);
Statement st = conn.createStatement();
ResultSet rec = st.executeQuery(
"SELECT Title, ContactID, First, Last, Dear FROM Contacts "
+ "WHERE (Title='Mr') ORDER BY ContactID");
/* ResultSet rec2 = st.executeQuery(
"SELECT Subject, ContactID FROM Calls "
+ "WHERE (Subject Is Not Null) ORDER BY ContactID");
System.out.println("\nFirst Name\tSurname\t\tNick Name\t\tSubject\n");
while(rec.next()) {
System.out.println(rec.getString(3) + "\t\t" + rec.getString(4) + "\t\t" + rec.getString(5) /* + rec2.getString(1) */ );
st.close();
catch (SQLException s) {
System.out.println("SQL Error: " + s.toString() + " " + s.getErrorCode() + " " + s.getSQLState());
catch (Exception e) {
System.out.println("Error: " + e.toString() + e.getMessage());
class PassDB extends javax.swing.JFrame implements ActionListener {
String username = "", password = "";
JTextField uname = new JTextField(10);
JTextField pword = new JTextField(10);
// JPasswordField pword = new JTextField(10);
PassDB() {
super("duBe's database logon");
setSize(220, 160);
setDefaultCloseOperation(EXIT_ON_CLOSE);
JPanel pane = new JPanel();
JLabel unameLabel = new JLabel ("Username: ");
JLabel pwordLabel = new JLabel ("Password: ");
JButton submit = new JButton("OK");
submit.addActionListener(this);
pane.add(unameLabel);
pane.add(uname);
pane.add(pwordLabel);
pane.add(pword);
pane.add(submit);
setContentPane(pane);
setVisible(true);
public void actionPerformed(ActionEvent evt) {
PassDB clicked = (PassDB)evt.getSource();
username = uname.getText();
password = pword.getText();
This code generates two errors, stating:
C:\Java_progs>javac DBQuery1.java
DBQuery1.java:14: non-static variable username cannot be referenced from a static context
Connection conn = DriverManager.getConnection(data, "" +
username, "" + password);
^
DBQuery1.java:14: non-static variable password cannot be referenced from a static context
Connection conn = DriverManager.getConnection(data, "" +
username, "" + password);
^
2 errors*****************************
The code works when I remove the reference to the variables "username" & "password" in Connection "conn" call & replace them with the actual username & password, but this is not exactly what I was after. I was hoping to make the program responsive to each individual user, not set in code.
I also would like to make the program pause after the call in "main" to "PassDB" to wait for "PassDB" to exit before continuing.
I would also like to make "PassDB" destroy itself after the "OK" button is pressed & the "username" & "password" set.
If that isn't enough for you, I would really like the program to search 2 different database tables, return their values & compare them to be sure that they are the same.
When I try & search 2 different tables, as in:
ResultSet rec = st.executeQuery(
"SELECT Title, ContactID, First, Last, Dear FROM Contacts "
+ "WHERE (Title='Mr') ORDER BY ContactID");
ResultSet rec2 = st.executeQuery(
"SELECT Subject, ContactID FROM Calls "
+ "WHERE (Subject Is Not Null) ORDER BY ContactID")javac tells me that "ResultSet" is set to null 0
As always, I am extremely appreciative of any assistance you are able to offer.
Kind regards
duBedat
[email protected]This is where I'm at now:
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import java.sql.*;
public class DBQuery {
static String username = "" ;
static String password = "" ;
public static void main(String[] arguments) {
PassDB UPass = new PassDB();
String data = "jdbc:odbc:JavaTestDataBase";
try {
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
Connection conn = DriverManager.getConnection(data, "" + DBQuery.username, "" + DBQuery.password);
Statement st = conn.createStatement();
ResultSet rec = st.executeQuery(
"SELECT Title, ContactID, First, Last, Dear FROM Contacts "
+ "WHERE (Title='Mr') ORDER BY ContactID");
/* ResultSet rec2 = st.executeQuery(
"SELECT Subject, ContactID FROM Calls "
+ "WHERE (Subject Is Not Null) ORDER BY ContactID");
System.out.println("\nFirst Name\tSurname\t\tNick Name\t\tSubject\n");
while(rec.next()) {
System.out.println(rec.getString(3) + "\t\t" + rec.getString(4) + "\t\t" + rec.getString(5) /* + rec2.getString(1) */ );
st.close();
catch (SQLException s) {
System.out.println("SQL Error: " + s.toString() + " " + s.getErrorCode() + " " + s.getSQLState());
catch (Exception e) {
System.out.println("Error: " + e.toString() + e.getMessage());
class PassDB extends javax.swing.JFrame implements ActionListener {
static boolean getOut = false;
JTextField uname = new JTextField(10);
JTextField pword = new JTextField(10);
// JPasswordField pword = new JTextField(10);
public PassDB() {
super("duBe's database logon");
setSize(220, 160);
setDefaultCloseOperation(EXIT_ON_CLOSE);
JPanel pane = new JPanel();
JLabel unameLabel = new JLabel ("Username: ");
JLabel pwordLabel = new JLabel ("Password: ");
JButton submit = new JButton("OK");
submit.addActionListener(this);
pane.add(unameLabel);
pane.add(uname);
pane.add(pwordLabel);
pane.add(pword);
pane.add(submit);
setContentPane(pane);
while(getOut == false)
setVisible(true);
public void actionPerformed(ActionEvent evt) {
PassDB clicked = (PassDB)evt.getSource();
DBQuery.username = uname.getText();
DBQuery.password = pword.getText();
getOut = true;
} Any advice is greatly appreciated
duBe -
Problems setting up an NFS server
Hi everybody,
I just completed my first arch install. :-)
I have a desktop and a laptop, and I installed Arch on the desktop (the laptop runs Ubuntu 9.10). I had a few difficulties here and there, but I now have the system up and running, and I'm very happy.
I have a problem setting up an NFS server. With Ubuntu everything was working, so I'm assuming that the Ubuntu machine (client) is set-up correctly. I'm trying to troubleshoot the arch box (server) now.
I followed this wiki article: http://wiki.archlinux.org/index.php/Nfs
Now, I have these problems:
- when I start the daemons, I get:
[root@myhost ~]# /etc/rc.d/rpcbind start
:: Starting rpcbind [FAIL]
[root@myhost ~]# /etc/rc.d/nfs-common start
:: Starting rpc.statd daemon [FAIL]
[root@myhost ~]# /etc/rc.d/nfs-server start
:: Mounting nfsd filesystem [DONE]
:: Exporting all directories [BUSY] exportfs: /etc/exports [3]: Neither 'subtree_check' or 'no_subtree_check' specified for export "192.168.1.1/24:/home".
Assuming default behaviour ('no_subtree_check').
NOTE: this default has changed since nfs-utils version 1.0.x
[DONE]
:: Starting rpc.nfsd daemon [FAIL]
- If I mount the share on the client with "sudo mount 192.168.1.20:/home /media/desktop", IT IS mounted but I can't browse it because I have no privileges to access the home directory for the user.
my /etc/exports looks like this:
# /etc/exports: the access control list for filesystems which may be exported
# to NFS clients. See exports(5).
/home 192.168.1.1/24(rw,sync,all_squash,anonuid=99,anongid=99))
/etc/conf.d/nfs-common.conf:
# Parameters to be passed to nfs-common (nfs clients & server) init script.
# If you do not set values for the NEED_ options, they will be attempted
# autodetected; this should be sufficient for most people. Valid alternatives
# for the NEED_ options are "yes" and "no".
# Do you want to start the statd daemon? It is not needed for NFSv4.
NEED_STATD=
# Options to pass to rpc.statd.
# See rpc.statd(8) for more details.
# N.B. statd normally runs on both client and server, and run-time
# options should be specified accordingly. Specifically, the Arch
# NFS init scripts require the --no-notify flag on the server,
# but not on the client e.g.
# STATD_OPTS="--no-notify -p 32765 -o 32766" -> server
# STATD_OPTS="-p 32765 -o 32766" -> client
STATD_OPTS="--no-notify"
# Options to pass to sm-notify
# e.g. SMNOTIFY_OPTS="-p 32764"
SMNOTIFY_OPTS=""
# Do you want to start the idmapd daemon? It is only needed for NFSv4.
NEED_IDMAPD=
# Options to pass to rpc.idmapd.
# See rpc.idmapd(8) for more details.
IDMAPD_OPTS=
# Do you want to start the gssd daemon? It is required for Kerberos mounts.
NEED_GSSD=
# Options to pass to rpc.gssd.
# See rpc.gssd(8) for more details.
GSSD_OPTS=
# Where to mount rpc_pipefs filesystem; the default is "/var/lib/nfs/rpc_pipefs".
PIPEFS_MOUNTPOINT=
# Options used to mount rpc_pipefs filesystem; the default is "defaults".
PIPEFS_MOUNTOPTS=
/etc/hosts.allow:
nfsd: 192.168.1.0/255.255.255.0
rpcbind: 192.168.1.0/255.255.255.0
mountd: 192.168.1.0/255.255.255.0
Any help would be very appreciated!Thanks, I finally got it working.
I realized that even though both machines had the same group, my Ubuntu machine (client) group has GID 1000, while the Arch one has GID 1001. I created a group that has GID 1001 on the client, and now everything is working.
I'm wondering why my Arch username and group both have 1001 rather than 1000 (which I suppose would be the default number for the first user created).
Anyway, thanks again for your inputs. -
Problems setting up static routing
HI
I'm having a problem setting up static routing. I keep getting the message "invalid static route". I have an E1550 router and my frimware is up to date. I have tried a few different gateway addresses ie 192.168.1.1, 127.0.0.1 and my router's address on the net, but I keep getting the same message. Has anyone else had this problem and been able to fix it?I think the E1550 router supports LAN to LAN routing provided that you have two local networks. If you only have a plain modem and the E1550, I believe you can't do Static routing on that type of setup. Found this link that might help: http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=12a84336a124498eb5d6f0204b85191e_17589.xml&pid=80&...
-
Problems Setting Up Developer Users
I am having a problem setting up developer users and I am trying to determine if I am missing a step or if there is a configuration problem on my staging and production systems.
What I want to do should be very simple. I want to create a user that can create an application and see the information under the "Application" tab in the Navigator.
I have created the user using the following steps on 3.0.9.82 for Unix:
1. Create the user
2. Make the user a full administrator (rather than end user)
3. Make the user a member of the portal_developers group
4. Make the user's default group the portal_developers group
However, when I do this the user does not see the information under the
"Application" tab. The only way I can get the user to see the info under the
"Application" tab is to make him a member of the Portal_administrators
and/or DBA group. Both my staging and production boxes have the same result.
Does anyone have any thoughts or suggestions on what might be happening?Thank you- I have read through that thread and can see some resonance with my issue.
My AOL emails work VERY fast with BB, in fact almost simultaneously received on PC & Torch " ping ping!"
This issue only raised its ugly head when I had 2 Torches replaced by my insurers.
Whilst the claim was in process I used a new Curve, loaded from backup on PC to keep emails going and of course phone & web facilities. ( I use the BB to power internet via bluetooth to my PC / laptop when living on a remote island with no phone lines or power supplies) All was fine. Swapping email accounts took a few minutes with the usual password confirmations for each AOL screenname etc.
Then the new Torches came back from insurers, and I tried to swap devices. Phoning & texting is fine. Al data and contacts swap over fine.
SETUP email accounts.............stymied every time. It says repeatedly that my user name/password is invalid etc etc etc
Have tried security wipes. Have tried setting up new BB ID & passwords on PC website. All is OK until I try to setup emails on the Torches. This has used up ridiculous amounts of time- all wasted.
I love the BB phones and the fast email push......in fact I recently bought a new Sony Xperia Z1 but sent it back because of wifi coverage meant no emails on that superb phone for lots of the time.
Good old BB I said..........I always get emails wherever I am. ( Rural Scotland has very patchy radio & wifi coverage)
Was about to purchase new Z10s just to get a bigger screen, but now I am averse to buying ANY BB phone again because this present mess means I may never get emails set up again. How nuts is that?
Many thanks for all help & suggestions..........boy do I need them!!
Kind wishes from West of Scotland
Fair winds and kind landfalls -
Problems setting up VVSA 6.0 (lookup service adresse)
Hi,
I was happy to see VVSA 6.0 released, but i'm having problems setting it up. It keeps saying that the lookup service adresse is not reachable. But I have tried with the VVSA 5.5 and 5.5.1.1 and they work just fine with the lookup service adresse.
Anyone else having this issue?
Also trying to check for updates within the appliance failes since the repository is not online at vmware it seems.
Might not be ready for primetime (like ESXi6).If Developer has a separate Oracle Home on your PC, then it has a separate TNSNAMES.ORA file that is uses to connect to the database. If you search for all tnsnames.ora files, you should find the one used by Developer 6.
Since Enterprise manager works, the tnsnames.ora in your Enterprise Manager's home will have an entry for your server database. You should be able to cut and paste this into the tnsnames.ora file used by Developer, or try copying the E.M. tnsnames.ora file directly.
John Alexander www.SummitSoftwareDesign.com -
I recently downloaded mysql Connector for my project.
However, I have problems setting it up.
When I run my program, It gives me a class not defined error.
System.out.println("Registering Driver...");
Class.forName("com.mysql.jdbc.Driver").newInstance();
System.out.println("Connected to database");
System.out.println("Creating Connection");
connection= DriverManager.getConnection("jdbc:mysql://localhost:8080/neuis");
System.out.println("Connection created");
catch(Exception ex)
System.out.println("Error in loading jdbc Driver: "+ex);
ex.printStackTrace();
I have put the jar file of the JDBC Bridge in a folder
C:\Drivers\Sql Connector
I have also added the absolute path of the jar to the system classpath
The value put in is:
C:\Drivers\Sql Connector\mysql-connector-java-3.1.10-bin.jar.
I am not sure what the problem is because I was told by the API that this was all I needed to do. Are there any other files I need to include with the jar file? Also, Is there a specific folder I must put it in?
Thank you in advance.Hi,
Take a look at the below link
http://www.cs.nott.ac.uk/TSG/manuals/databases/mysql/jdbc.html
may help you to setting up the jdbc with mysql
regards
MJ -
Problems setting up email account
Have recently got a blackberry 9300 and having problems setting up my aol email account.
Do not know how to fix this problem, can anyone please give advice?Hi and Welcome to the Forums!
Well, a bit more detail than "having problems" might help us just a bit...keep us from guessing, after all. In the meantime, see this:
http://us.blackberry.com/support/blackberry101/setup.jsp#tab_tab_email
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code
Maybe you are looking for
-
Soft Proofing in Aperture vs Others
I posted this in another thread, but didn't get a reply so I thought I'd try another Subject title. Sorry. Someone was having a problem with Aperture to Photoshop using CYMK. I'm having the same problem Adobe RGB images. I use Gretag/Macbeth to calib
-
Can vmware player be used to create windows pc and mac. Will I need any other software or hardware to do that?(Have Windows and Mac on same computer)
-
My iphone 4 will no longer let me switch on the buetooth or wi fi. It was working perfectly then all of a sudden it all stopped!!!!! Why???????
-
Jelly Bean Update Problems on Xperia S Tablet
I think we need a new topic for Jelly Bean update problems and fixes. Solved! Go to Solution.
-
I am using JDev 11g. I created tree table and warped around with toolbar with commandToolbarButton in it. How can I delete leaves or root node? Thanks.