Problems with B2B Editor validating HL7 Messages

Hi all,
I am having some problems related to B2B Document Editor and HL7 messages.
When we ran the Analyzer with the following document:
MSH|^~\&|ALERT|CHVNG|CPCHS|CHVNG|20070409145826+0000||OMG^O19^OMG_O19|1|P|2.4|
PID|||303030^^^SONHO^NS||Patient^Alert||19840412000000+0000|M|||ESTRADA DA BARROCA, LOTE C O, FRT^^ENTRONCAMENTO^^2430|||||||^^^CHVNG|
PV1||URG|1^33^^1||||||||||||||||27041729^^^CHVNG||||||||||||||||||||||||||||||||V|
ORC|NW|100^ALERT|||||||20070409145813+0000|||123^Teste^M\XE9\dico^^^^^^^^^^ON|||||2000^RADIO TEXT^CHVNG|
OBR||100^ALERT||M11020^Abd\XF3\men Simples Em P\XE9\^RADIO||||||||||||123^Teste^M\XE9\dico^^^^^^^^^^ON|
NTE|||dor abdominal|
we received the following message:
"The data starting at position 510 is not a valid EDI interchange. The remainder of the data file was ignored. "
It identifies the header (MSH Segment) well, but it can not identify the message body.
It is very strange, because we've selected HL7 as the message format on the previous step but aparently this message is a EDI format message. This message occurs on any file we have or with any HL7 message found on the internet (http://www.dt7.com/cdc/sampmsgs.html)
We can open the document with the Data Editor, but if we change any value and save it, it is impossible to open the message with the Analyzer:
"The data in the file could not be parsed. Please check the file to verify that it is valid and formatted correctly. This error can occur for one of the following reasons: A) The data file may be a Word document or have some other binary format. B) The envelope data may not be formatted properly. If this is an X12 data file, please verify that the ISA segment is the correct size (exactly 106 characters). If this is an EDIFACT data file, it must have either a UNA or begin with UNB. For other standards, verify that the envelope segments conform to the specified rules. C) The segment/record delimiters in the file are incorrect."
We are running the B2B Document Editor version 6.0.0.1471 with the 6.0.4.84 version of HL7 Database version.
Can you give us any advice ?
Cheers,
Rodrigo Nascimento

Hello,
As per Jeff's post even we have observed OD OA at the end of the line. Please use a hex editor or B2B document editor to correct the same. We have done the above steps and are not getting the mentioned errors. HTH.
Please let us know.
Rgds,Ramesh

Similar Messages

Problem with iOS7 : I have a message on my screen "This phone is not registred as a developper phone..." or something like that, can you help me because I download the iOS7 Beta even if I was not a developper. Thank you very much if you help me.

Problem with iOS7 : I have a message on my screen "This phone is not registred as a developper phone..." or something like that, can you help me because I download the iOS7 Beta even if I was not a developper. Thank you very much if you help me.

JaillotJb wrote:
I download the iOS7 Beta even if I was not a developper.
if you downloaded it and are not a developer, then we are not allowed to help you here. sorry.

I use only two channels, have plenty of memory in my hard disk, and external hard drive, no effects, and still having problems with Garage band. Giving messages as you have too many live channels

I'm frustrated, I am doing everything you recommend, I use only two channels, have plenty of memory in my hard disk, and external hard drive, no effects, and still having problems with Garage band. Giving messages as you ave too many live channels, the disk is slow prepare...can you help?

Quote from: Richard on 15-November-07, 20:33:05
tornado2003,
What you need to do is boot into Safe Mode. Then delete the VGA Drivers.
After that boot normally and install the latest nVidia ForceWare Drivers
Take Care,
Richard
i guess you missed that:
Quote from: tornado2003 on 15-November-07, 17:26:52
ive tryed booting xp in safe mode but it just freezes after it loads up a couple of needed files .
ive even formatted my hard drive and tryed installing a fresh xp on it but it just keeps locking up when it gets to the "starting windows setup" .(this is just after it loads all the drivers from the xp cd)

I have a problem with my white macbook, this message keeps popping up when I start the laptop " no matching processes belonging to you were found " even though I didn't mess up with the system or even use terminal. It just appeared

I have a problem with my white macbook, this message keeps popping up when I start the laptop " no matching processes belonging to you were found " even though I didn't mess up with the system or even use terminal. It just appeared without Doing anything!!
And now I can't use the " tap an click " from my tack-board and no nothing was spilled on my mac.
Please help

Check your login items in the Users & Groups preference pane. Remove any that you don't recognize.

I have some problems with element Panel Label and Message.

I have some problems with element Panel Label and Message. When I create form from VO attributes then I have Label for input text element. If I use Panel Label and Message element then I need to copy LABEL from input text element to Panel Label and Message element LABEL PROPERTY. Can I define in View object that I don't need label and want all attributes in Panel Label and Message element?
BEST REGARDS

You can simply remove the label attribute for the input text on the page.
sid

Problems with AppleScript Editor.app in Snow Leopard

I have been using the Satimage.osax scripting addition with Script Editor.app in Leopard without problem. After I upgraded to Snow Leopard, the Script Editor.app was replaced by AppleScript Editor.app in which the following one-line script
change "," into "." in "3,1416"
compiles without error but it gives an error when I try to run it: as if AppleScript Editor.app was not able to load the ScriptingAdditions (despite the fact that it correctly shows the dictionary for the Satimage.osax scripting addition).
When I decided to get back the old "Script Editor.app" and use it in Snow Leopard to run the above script, I found... no error! It ran correctly.
Anybody observed similar problems with the AppleScript Editor.app and ScriptingAdditions?
Can anybody offer a solution other than trash the new AppleScript Editor.app and stick to the old Script Editor.app?

Post to the AppleScript forum under OS X Technologies and send a message to Satimage.

Problem with condition editor in Interface determination

Hi,
I have 5 receivers for an interface. There are some conditions based on which the message should be processed.
one of my condition is:
If field A = CIT* and (field B != IDP or field C != IDP*) then message should be processed to a particular InterfaceMap(Messaeg Map).
I am facing problems when giving the condition with != in the condition editor of InterfaceDetermiantion.
When I send a message that is not satisfying the above condition, even then an output file with 0kb is getiitng created. But in this case, the condition should obstruct the message going to Message mapping.
I thought this could be the problem with != operator in condition editor.
Can any one suggest if there is any other way that i can proceed.
Thanks in advance,
Minisha.

Hi Suraj,
Thanks for the suggestion.
But it didnt work for me.
Even when i give empty-message handling to ignore, the empty file is getting generated.
Not even the condition is working.
I tried only giving (field A u2248 CIT* AND field B != IDP EX ), which should work in this case. As expected, the message is not processed beyond this as the condition is false. But problem is when i tested with other testfile with which the condition given is true, still the message is not being processed. it is now completely obstructing the message even if the condition is true.
Thanks,
Mnisha.
Edited by: Minisha Uthaman on Sep 10, 2009 4:12 PM

HT4623 is anyone else having problems with receiving and sending text messages. most people in my contacts are not getting messages that i send to them.

is anyone else experiencing problems with (SMS) text messaging. Most all of my daily contacts dont receive my messages.

Make sure you have checked off iCloud contacts in your Contacts app under Groups in upper left corner.

Problem with HP pavillion dv7 giving message (a problem with the internal fan enter = shutdown

HP Pavillion DV7 notebook PC
Windows 7 64
intel I5
6 gig memory
service pack 1
I am trying to identify a problem with my HP Pavillion dv7 laptop
Several months ago it started getting hot and showing messages about problems with the internal fan and battery. It would say enter = shutdown and shut off. I suspected a bad battery so I checked it without it just plugging it in with the power cable. It seemed to work better so I assumed that was the problem.
I ordered a new battery and it worked for a while. The problem came back and is getting worse. I can run it without the battery for a while but it gets got and shows the same message.
I read on here that flashing and updating the bios worked for some but the latest update gives me an error IHISI not support BIOS then Insyde flash not supported.
any help would be great this PC has a lot of info on it and I dont think it is a lost cause
thanks

Hi duddy, sorry to hear that you are having issues with your computer over heating. I have found a document that will assist you with Restoring the BIOS. http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c02693833&lc=en&product=5199538&tmp...
I have also found a document that will assist you with Troubleshooting and Overheating and Auto shutdown issue. http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c03904182&lc=en&product=5199538&tmp...
If you are still having issues, please let me know and I will be happy to offer more assistance..
Thank you.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

I am having a problem with email, when I delete messages from my Ipad, they come back into trash whether they are on my PC or not. The only way I can delete them is to to my providers site and delete everything there.

I am having a problem with email. I can receive and send, but when I delete, the deleted messages return into either Trash or Bin or both whether or not I have deleted them from my PC.
The only way I can get rid of them permanently, is to go into my area of my providers site(Sky) and empty all of the boxes there. I imagine it's a setting, please advise.

For IMAP mail only.
Settings>Mail, Contacts, Calendars>tap on mail account>Archieve Messages>OFF

'A problem with the cooling system' error message on Satellite A660

Hi all,
Hope I can get some help here. I've had about 5 HP laptops after all of them had problems and faults. I got sick of them and therefore got a refund and bought a high spec A660-1FH.
The A660 has been a great laptop for two days until yesterday when I started getting a warning message saying 'A problem with the cooling system has been detected. Please turn off the computer immediately, and return it for service'.
The cpu fan works fine as you can here it spinning and the temperature of the i5-460m processor is around 40 degrees for both cores - which seems normal to me. I've noted that it happens only when running on battery and if you switch from eco utility to power saver mode. Its fine when running on the 'balanced' power setting. The fan is louder before when this message appears.
As its under 28 days my retailer swapped it for a brand new one straight away. Got the new one home, and the same message appears again. Has anyone else experienced this. As two laptops have had this, I'm wondering if this is normal for the A660 series laptop or if there is really a hardware issue?!
I have tried to upgrade eco utility and the bios of the laptop but both are the latest versions. Can anyone help or share if they experience a similar issue with their laptop?
Thanks

In front of me I have Satellite A660-13Q (PSAW3E) and I have it about 6 weeks now. It runs almost 10 hours daily and until now I didnt notice such message or anything else that can be suspect for hardware functionality.
I really dont know why this happen on your notebook and dont think there is anything you can do about it.
I would exchange it again. What you can also try is to contact nearest Toshiba service. Make a call, explain the situation and ask if they can help you with this.

Anyone having problem with iphone getting not delivered message after sending picture and it really is getting delivered to recipient.

Anyone having problem with iphone getting a not delivered message after sending pic and it really is getting delivered to recipient.

Same problem here with and I've done everything shy of a total reset which I also find unacceptable. This problem exists on all iMessage platforms (iPhone, iPad, and Mac) so I don't see how restoring my iPhone would help the problem.

Media center problem with Qosmio G35-650 - error message

hello all
I have a problem with media center on qosmio g35-650.
When starting live tv , an error message appears and writes "application failure please restart your computer again. if problem persists again please contact with your hardware assistance"
It was working yesterday and today something happened.
Also it cant find any tv signal available. Is it a hardware problem?
regards
cem mete

Hello
Please dont be mad on me but in most cases is the user the problem and not the machine. I really dont know what is problem in your case but if the unit has well TV signal there should not be any problem.
Your unit must be an US model. Those notebooks are not known to me but I presume that Qosmio player is preinstalled too. I have G20 and TV works perfect (WMCE and Qosmio player). What is with Qosmio player in your case? Does it work well?
Be sure that TV tuner is listed properly in device manager and also TV antenna is connected properly.

Problem with condition IF THEN in Message MApping

Hi,
We are not getting correct ouput when we use condition IF THEN without else in message Mapping .We are sending data from File to XI to R/3.
We are using file adapter and IDOC adapter to create customer in R/3.
In message Mapping we are creating Segment E1KNB1M and E1KNBKM based on condition.
IF THEN Condition used in mapping is as below
find the length of Compnaycode with LENGTH function.Pass that value as one of the parameter to function GREATER.Pass second parameter to function GREATER a constant (0).Pass the result to If without else function.If this is true pass Item to IF THEN function and Map the result to E1KNB1M.
Our mapping is not giving desired output in below scenario:
Source XML
<?xml version="1.0" encoding="utf-8" ?>
<ns:CustomerMaster_Request_MT xmlns:ns="http://mazdausa.com/sapr3/fi/masterdata/customermaster">
<Idoc>
<Header>
<ID>H</ID>
<ACCTGRP>M002</ACCTGRP>
<CUSTNO>R51563</CUSTNO>
<NAME1>WAYNE MAZDA</NAME1>
</Header>
<Item>
<ID>L</ID>
<COMPCODE>US10</COMPCODE>
<BANKKEY>0000326</BANKKEY>
<BANKCNTRY>US</BANKCNTRY>
<BANKACCT>05893</BANKACCT>
</Item>
</Idoc>
- <Idoc>
- <Header>
<ID>H</ID>
<ACCTGRP>M002</ACCTGRP>
<CUSTNO>51563</CUSTNO>
<NAME1>WAYNE MAZDA</NAME1>
</Header>
</Idoc>
- <Idoc>
- <Header>
<ID>H</ID>
<ACCTGRP>M002</ACCTGRP>
<CUSTNO>V51563</CUSTNO>
<NAME1>WAYNE MAZDA</NAME1>
</Header>
- <Item>
<ID>L</ID>
<COMPCODE>US10</COMPCODE>
<BANKKEY>000326</BANKKEY>
<BANKCNTRY>US</BANKCNTRY>
<BANKACCT>0305893</BANKACCT>
</Item>
</Idoc>
</ns:CustomerMaster_Request_MT>
Here 3 Idoc are created under ZDEBMAS06.
First IDOC contain segment E1KNB1M and E1KNBKM as desired because first idoc in Source XML contains Item data.
Second IDOC contain segment E1KNA1M only as desired because second Idoc in Source XML does not contains item data.
Third IDOC does not contain Segment E1KNBKM and E1KNB1M which is not a desired output. It should contain these segments as third idoc in source XML have item data.
But we are getting right output in case we also have Item data under second IDOC in source XML.
Please let me know where I am doing wrong.
Thanks.
Rekha.

Hi Rekha,
I am getting the same problem while checking display Queue in message mapping??
<i><b>Source code has syntax error: java.lang.NoClassDefFoundError: com/sun/tools/javac/Main Exception in thread "main"</b></i>
Any ideas to solve this problem...
Thanks,
Sekhar

Problem with attaching files to mail message

Hello,
I have problem with my mail app. I'm using spaces for better organization. When I wanna add some file to mail message I usually go to different desktop (space), where I have the file I wanna attach. I grab it move to right up corner to activate spaces, than move to desktop (space) with mail.app and press spacebar (it activates the desktop immediately). At that time it also start random app, which is in my dock.
You can see it in my youtube video.
How can avoid this strange thing happen?
http://www.youtube.com/watch?v=KUypUnPHZvc
I'm using MacBook Pro 15'', Snow Leopard - latest updates. I've reinstalled my mac two days ago, so no garbage should be in.

Thanks for quick reply.
I don't have selected "always..." so I also tried it with selected "always...".
Now I discovered that it has nothing to do with the mail. I've tried just move some file from one of spaces (desktop) to another using the spacebar for faster switching and it did the same. It opens random app from Dock.
So now this topic is in wrong discussion. I will post it to correct discussion...

Problems with B2B Editor validating HL7 Messages

Similar Messages

Maybe you are looking for