Problems with collate print in CS4/windows

I have to make 200 booklets in InDesign, but since i have got CS4 I can´t collate. I print 200 pages of page 1 and then 200 page of page 2 and so on. It it a large job to make booklets out of that afterwards. In my old version it was a piece of cake and just worked......
Do any of you have the solution for that????

Try opening CS3 and trying it there just for a few pages, make sure it's working.
Then Define a Print Setting based on these settings, and then import that setting into CS4.
From the Print Dialog box you can "Save Preset"
Then go to File>Print Presets>Define and then save the preset to your hard drive
Then in CS4 go to File>Print Presets>Define and import that preset.
See if that does it?
I think you're just missing a switch in Cs4 to do it, but that should work considering it's using the same settings used in CS3.

Similar Messages

Problem with 4250dtn printing multiple copies Windows 7 64 bit

We can't print multiple copies from within some, but not all, applications to a Laserjet 4250dtn from Windows 7 64-bit workstaitons. Windows 7 32-bit ones work fine. The printer is served from a Server 2003 printer queue, but even when we print direclty to the port we only get one copy. Setting copy count from the printer dialog works fine, but we need to have the applications invoke multiple copies. We are using the UPD 64-bit driver; could not find a legacy driver for this printer for Win 7 64 bit. I've tried various tricks found elsewhere on this forum, including turning off mopier mode, printing directly to the printer, disabling advanced features, etc. to no avail. Help, anyone! Thanks. Jerry TurnbowUSBO

Thanks very much for the feedback. I was getting worried!
The command window opens when I double-click on the Developer Day VM and I get a few lines that scroll off the window about loading Linux .... These lines never come back and I can't scroll in the command window.
As soon as the above messages come into the command window the whole process stops. The window stays open but I get no response from it. I get no login prompt or anything.
Do you think it could be a VirtualBox setup issue? I downloaded and installed the product along with the extension pack with no apparent problems and when I start VirtualBox I see the Developer Day VM listed in the left panel. All I do at that point is double-click it like the download web site said but I don't get the same results, i.e. no chance to login. It seems all I can do at that point is close the window by clicking the 'X' and it asks me 3 things about what to do with the VM and I usually say to shut it down. None of the other options look any better either.
Any other suggestions are most welcome!!
Thanks again!
-gary

Problem with my printer "sorry not recognised"

Dispite posting the problem i had after MUCH hard work and searching for how to do this, i never got a reply (i thought this was a support forum), i hate to say it but support from HP has seriously gone down hill, i have a problem with my printer which is in warrenty can i send and email NOOOOOOO cos i have to put S/N and product number i put them in but i get "sorry not recognised" How the hell are you meant to get any support when they make 99% impossible to to post and email them i am sorry HP but your support is a shambles, your heads should be hung in shame.

Same problem and the same printer, Yosemite not recognize the printer (which I think is incredible, Windows was better in these areas to get a new OS).
Some advice from those who have been mentioned here and do not solve the problem?
If I had known I stay with Snow Leopard, worked best on Imac mid-2010.
Very unhappy with Apple, had understood that they were more serious and respectful to customers.

Pavillion G6. Shrunk C Drive, and formatted the other as I drive. Had some problems with my printe

I shrank C drive. that left me with another drive, which I formatted as drive I. The recovery drive is D, as it was when I received the computer. I had some problems with my printer (Epson) through a Dlink DIR655B1, and wanted to return the computer to factory condition.
When I try to use the recovery through Windows, it says factory reset is disabled?? When I try to shut down, reboot, and use the bios restore, it just comes up with an error message, says to use the dvd that came with the computer, which it didn't?
Any way I can put this all back to normal?
Thanks
Joe

517joe wrote:
I shrank C drive. that left me with another drive, which I formatted as drive I. The recovery drive is D, as it was when I received the computer. I had some problems with my printer (Epson) through a Dlink DIR655B1, and wanted to return the computer to factory condition.
When I try to use the recovery through Windows, it says factory reset is disabled?? When I try to shut down, reboot, and use the bios restore, it just comes up with an error message, says to use the dvd that came with the computer, which it didn't?
Any way I can put this all back to normal?
Thanks
Joe
You damaged the partition structure when you shrank C, see this guide to properly add a 5th partition after you get it restored using HP recovery media.
http://h30434.www3.hp.com/t5/Other-Notebook-PC-Questions/How-to-repartition-HDD-of-HP-notebook-with-...

Canon pixma pro 9500 having problems with my print out. colors are glazed and missing colors

canon pixma pro 9500 having problems with my print out. colors are glazed and missing colors
i have prfiled the mac and printer wiht colormunki and uplodated the profile sucessfully
i set the printer to correct icc profile
print out comes out same with glazed colors and missing tones/colors
however when i use the same printer on windows and with light room, following same icc profile, colormunki calibrated profile, the print our are excellent.
i have also tried using printer manage profile using the Mac and Aperture and get same poor prints
can you please assist and thanks

I've a Pro9000 and also use Colormunki successfully.
When I use Colormunki, I calibrate both of my monitors and the printer/paper combination. Colormunki saves the generated profiles to the correct places -- I don't load or change any profiles after that as that would mess-up what the Colormunki had just done for me, and this would likely mess-up the prints.
Though I double-check the settings in the print dialogue, the choice for the printer handling things is already grayed-out. Colorsync handles it all just fine.

Problem with reinstalling Adobe Illustrator CS4 on new pc

Using a new PC with Windows 7. Upon reinstalling and inputting serial number, prompt appears..."We looked inthe default locations for qualifying products installed on this machine but none found. You may verify upgrade eligibility now by completing fields to the right." Choices given do not include Adobe Illustrator CS4. What next? I appreciate the help.

I have a disc in the same box that says CS3. I thought that was an older version. Should I try installing that disc first? It seems to have a different serial number. Thanks so much for your help. I appreciate it.
Date: Mon, 3 Sep 2012 15:25:41 -0600
From: [email protected]
To: [email protected]
Subject: problem with reinstalling Adobe Illustrator CS4 on new pc
    Re: problem with reinstalling Adobe Illustrator CS4 on new pc
    created by Jeff A Wright in Downloading, Installing, Setting Up - View the full discussion
It is looking for the qualifying product which entitles you to use the Illustrator CS4 update. Did you have an older version of Illustrator which upgraded from?
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4670448#4670448
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4670448#4670448. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Photosmart 7520 error. there is a problem with the printer. turn printer off then on.

I have a photosmart 7520 experiencing the following issues.
Problem #1: Randomly all the lights start to blink off and on and the display reads the following :
Error . There is a problem with the printer. Turn printer off then on.
I cannot find any one action that triggers this to happen.
Problem #2: When the printer is turned on and idle, also at RANDOM times, the printer will "Ding" followed by the wireless light blinking. Then what sounds like the cartridges being cleaned, then a sound like the feeder spinning or the print head running full track from side to side, then ending with a "Ding" and then returning to normal.
When this occurs, the wireless connection is disconnected then reconnected. Also this Disables the "Scan to computer" function to all the computers on the network and requires manually re-enabling all .
From what I can tell the printer is restarting itself.
It is plugged directly into the wall outlet, no surge protector.
Tech support has already run me through the clean the print head steps, escalated me up the chain, and ultimately replaced the printer with a brand new one.
THE NEW PRINTER IS DOING ALL THE SAME THINGS AS THE PREVIOUS ONE.
This printer is connected wirelessly to a Netgear N900 router. My computers all running Windows 7, all are on the same network and workgroup and all are running Mcafee Total Protection.
If anyone is or has experienced the same or similar problems, I could sure use some help.
This question was solved.
View Solution.

How did you fix this?
I replaced an HP printer recently for a new Photosmart 7520 after a complete ink container emptied into the printer.
The old printer sometimes had difficulties switching it on and the new printer has the same problem.
Also the wireless connection regulary drops and can only be reenabled by switching of the printer and switching it back on, only this sometimes takes more than ten minutes before a simple push on the power button is translated in a power on of the printer.
Since the previous printer also suffered from these "power" issues, I think the problems are power related, but I have to check this first before I can say anything more about this.

Problem with HP Printer Utility and Mac OSX 10.5.4

I have a problem with HP printer Utility. When a standard user adds a new paper profile HP Printer Utility asks to type an administrator's name and password to allow HP printer Utility to make changes. Is it possible to avoid this? Otherwise I have to give admin rights to every user because they have to be able to add new papers. HP printer Utility sharing and permisssions are set to read and write to everyone.
HP designjet Z3200
MacOSX 10.5.4 (Mac pro intel)
HP printer utility 3.6.0.

Just found an email HP Support sent to me back in January 2008, about this issue
"Hello Hunter,
Thank you for contacting HP Total Care.
There currently is not proper driver for 10.5, so it is surprising that the printer is printing correctly on your Mac from any application.
Your issue cannot be resolved until the 10.5 driver is developed and released.
To sign up for an update as soon as it is available ...click on the link below:
HP's subscriber's choice is a free service where you can select to receive timely email notifications ranging from software and driver updates to creative ways to do more with your HP products.
http://h71036.www7.hp.com/hho/html/3618-0-0-225-121.html
If you need further assistance, please reply to this message and we will be happy to assist you further.
You may receive an e-mail survey regarding your e-mail support experience. We would appreciate your feedback.
For information on keeping your HP and Compaq products up and running, please visit our Web site
at:
http://www.hp.com/go/totalcare
Sincerely,
Dave
HP Total Care"
I just sent them an email today on any updates regarding a release date on the Leopard driver for P1005, i'll post any info i receive.

Problem with tv@nywhere plus on windows 8

hi
i have a problem with tv@anywhere plus on windows 8. i can setup the pvr plus app completely but when i open that and click on "watch and record dtv program" icon, i will see an error that says: "invalid class string!"
i think this problem should be for its driver because i'm using windows 8 64bit and the driver is for windows 7, i couldn't find an appropriate driver for windows 8 on MSI driver downloads, as matter of fact it didn't exist.
so what should i do for my problem?

I'm afraid TV@nywhere Plus is a bit outdated for Win8. There is no update so far since 2010. Could be MSI won't add Win8 support if it would be anyway possible.

T.code FBL5N: a problem with the print of the output list

Hi All,
with reference to the t.code FBL5N, I have a problem with the print of the output list of the report.
When I execute the print, I obtain one customer for each page printed.
I wonder if is possible to obtain more customers for each page printed.
Could anyone help me?
Thanks
Gandalf
Edited by: Umberto Gandalf on Dec 21, 2008 10:36 PM

Hi,
Though personally i havent tried this option, check the same
Go to Menu: Settings >> Switch List
This will make the value displayed in ALV format and then try taking print outs.
Regards,
Sridevi

Problems with my printer HP Officejet pro 8600 Plus + Yosemite

Hi got problems with my printer HP Officejet pro 8600 Plus till I installed Yosemite it is not recognized so what can I do now.. No new drivers found by HP

Thanks for this AnnRT!
I've spent the best part of a day trying to figure this out. Everything was fine and then one day nothing worked! I have narrowed the issue down to Bonjour via WiFi as everything worked fine via USB, and via IP over WiFi.
I've now set a static IP for the printer and things seem to be working fine again
Thanks!
Chris

Problem with pdf-printing in Adobe Acrobat Pro

Hi,
I have Adobe Acrobat Pro 9.4.3.
PDF-printing has always worked great but suddenly there is some kind of problem.
After printing a excel-document from "Print to pdf" built-in function in MacOS OR Adobes Printer I have corruptet pdf-files when showing them in Adobe Reader/Acrobat, but the MacOS Preview-software shows them correct.
So, there cannot be any problem with the printing, but the local preview on my computer using Reader or Acrobat. I dont even use the Myriad font in the document, I use Verdana.

You say you're using Verdana but you're not. The error message clearly shows you're using MyriadPro Bold.
You probably recently installed the Mac OS X 10.6.7 update which has a bug with OpenType PostScript fonts like MyriadPro Bold. Either use Verdana or another TrueType or PostScript font, or revert to Mac OS X 10.6.6.
Read about the problem here: http://www.tidbits.com/article/12078

HP Officejet Pro 8600+ "There is a problem with the printer or ink system..."

I have an HP Officejet Pro 8600+ that is coming up with an error message. This just happened out of the blue yesterday. The printer is just over a year old.
It says:
"There is a problem with the printer or ink system. Print head missing not detected incorectly installed or incompatable"
I have removed and reinstalled ink cartridges, the head, unplugged, cleaned, etc. etc.
HP Officejet Pro 8600+
Product Number CM750A
Serial Number {Content Removed}
Not under warranty
Please advise.
This question was solved.
View Solution.

Sorry that you are experiencing this problem. Here is a link that may assist you with the ink system.
http://goo.gl/BXDFf
It seems to be a bad print head, or it needs manually cleaned with lint free cloth and water. If these steps do not resolve the issue, contact HP Support (1800-474-6836).
**Click the KUDOS star on the left to say 'Thanks'**
Please mark a reply "ACCEPTED AS SOLUTION" if it solved your problem, so others can find it.

Problem with the printer or ink system code 0x610000f6 HP model 6700 premium

Hello, I have recieved an alert for the second time in a week stating that there is a problem with the printer or ink system. The alert prompts me to turn off, then on the printer. If problem persists, contact HP. 0x610000f6. What could be the cause for this type of alert to appear?

'0x610000f6' error message appears if there is a 'Paper Jam' or a 'Carriage Jam' in the printer.
You can experience following issues:
The product won't print.
The print job stops unexpectedly.
To resolve Error code '0x610000f6' follow methods provided in below mentioned link
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c01620497

Problems with HP printer and PSE 11 (was bill v)

When using my HP 7020e photosmart printer and Adobe photoshop elements 11, I get a very small white border on the prints. I have set for borderless printing. Adobe says the print size is 4.2 x 6.18 instead of 4 x 6. Any suggestions?

I had already set it to borderless but it still prints a very small white
border. HP had no solution. I am ready to send the printer back to them.
In a message dated 1/14/2014 5:47:22 A.M. Eastern Standard Time,
[email protected] writes:
Re: Problems with HP printer and PSE 11 (was bill v)
created by hyadav (http://forums.adobe.com/people/hyadav) in Photoshop
Elements - View the full discussion
(http://forums.adobe.com/message/6010537#6010537)

Problems with collate print in CS4/windows

Similar Messages

Maybe you are looking for