Problems with deleted domain

Someone created a domain and then deleted it. The domain purge did not work so I deleted the entries with the ldapdelete command on the directory server. The problem now is that when I try to create the domain again on the Delegated Administrator I still get the following error:
Status: CreateDomain
Failed:
This container is already in use.
When I run the ldapsearch I do not find this domain. What could be the problem??
I'm using this messaging server version:
iPlanet Messaging Server 5.2 Patch 1 (built Aug 19 2002)
libimta.so 5.2 Patch 1 (built 23:25:07, Aug 19 2002)
SunOS mail 5.9 Generic_112233-05 sun4u sparc SUNW,UltraAX-i2
with delegated administrator version .1.2

First, you NEED to upgrade to at least patch 2. Your code is years old.
You should also upgrade your DA, as 1.2p2 has long been available.
There must be something left of your domain entry, or DA wouldn't be choking on it. Examine your Access Log for when you try to add it, and see what search came back with results. Duplicate that search on the command line, and see what that data is.

Similar Messages

I how problems with delete/ fix alias

I how problems with delete/fix alias. Somehow, I am trying to delete or fix alias by clicking the icon it show a pop-up saying to click "delete alias" or "fix alias." When I click "delete alias", it wouldn't let me. When I click "fix alias" I could not find what I am looking for. I try clicking different icon, but is show a pop-up saying "it could not be found (error code-43). Can someone help out????

Moved to InDesign forum.
You can start by telling us what the problem is.

Have a problem with deletting a folder that has lots over 100+ folders in it that are locked, please help

Have a problem with deletting a folder that has 100+'s folders in it that are locked. Please help.

Put the folder into the trash - go to the Finder menu and hold down the alt key whilst selecting Empty Trash.
I've never tried this with a folder full of locked files, but it certainly works with a single locked file.
Hope that helps!

Problem with delete index of cube in process chain

HI ,i have a problem with my process chain,here on process name as delet index is ther which has been turned to red.when iam going inside of that in Display message iam getting the msg as"Indexes for InfoCube SMS_C06 have been deleted successfully".
since the process is in red next process is not been triggering,but i have to continue the process chain.
can anybody put some light into it.its very urgent........

Hi,
I ran into the same situation with one of my process chain that is part of a metachain. The process chain has the Delete Index that turned red. But the messages show that the indexes on all the cubes were deleted sucessfully.
As suggested, I did a repeat on the delete index variant, but no luck as it turned red again.
Anyone aware familiar with this issue?
Thanks,
Briston

Problem with NFSv4 Domain name

Hi,
I am creating zones for the first time.
I am having problem with the NFSv4 domain name prompt.
I followed the instructions described in
http://opensolaris.org/os/community/zones/faq/#cfg_sysidcfg
After the installation of the zone, on zonepath/root/etc, I created a sysidcfg file and did
touch *.*NFS4inst_state.domain
Booted the zone and logged in to the zone console.
The sysidcfg worked as expected but the NFSv4 prompt didn't go away:
─ NFSv4 Domain Name ────────────────────────────────────────────────────────────
NFS version 4 uses a domain name that is automatically derived from the
system's naming services. The derived domain name is sufficient for most
configurations. In a few cases, mounts that cross domain boundaries might
cause files to appear to be owned by "nobody" due to the lack of a common
domain name.
The current NFSv4 default domain is: "xx.xx.xx"
      NFSv4 Domain Configuration
      ──────────────────────────────────────────────
      [X] Use the NFSv4 domain derived by the system
      [ ] Specify a different NFSv4 domain
────────────────────────────────────────────────────────────────────────────────
    F2_Continue    F6_HelpWhat is missing?
I am running
$ more /etc/release
                       Solaris 10 11/06 s10s_u3wos_10 SPARC
           Copyright 2006 Sun Microsystems, Inc. All Rights Reserved.
                        Use is subject to license terms.
                           Assembled 14 November 2006
$Thanks in advance

Hi
Can you please confirm that there is no “Create A records” option under “More Actions” ?

Problems with deleted outbound deilverys

Hi all,
I have the following problem with a deleted outbound delivery. The issue is that a sales order was created and a outbound delivery was assigned to this sale order, but somebody deleted the outbound delivery, unassigned the corresponding material and the shipping person assigned this outbound to another sale order believing that there were still plenty of material to cover both sales orders.
The help needed here is how do I know which user deleted the outbound delivery is there a record for that??
I'll appreciate your help a lot.
Best Regards,
Erik Espinosa

Malice is seldom behind stuff like this, from my experiences.
Prime candidate is human error (possibly with an attempt to fix it, which also includes hiding it...).
=> Send the sales folks a mail with the order number and description in it and ask them whether any of them know about it or are aware that an error might have been made. This gives them the opportunity to realize the implications of their mistake, or "own up" to it.
Depending on how your system is integrated and how many "cowboy" developers you had / have around, faulty config and even naive user-exits cannot be completely excluded.
=> Hard to find (better to prevent), but doing a where-used-list on the related VK* tables to see whether any Z-programs turn up is a start.
Either way, with the sales order number, you should be able to find the user context which performed these actions via the business change documents.
=> Take a look at the SCD* transactions, and the CD* tables.
If it was a batch user at midnight... then see "Hard to find..." above.
Cheers,
Julius

Problem with delete operation

Hi all,
Jdev version(11.1.1.3.0)
I have a <af:table> with a check box.I can select the rows
by checking check box and delete those rows.
Sometimes am facing a problem in deleteing the rows.
The viewobject that binded to the table,is based on two
Entity Objects A&B.The table B has no primary key field.But
it has a dynamic row_id as key fileld.
The problem is am not able to filter
the query results,when I select dynamic "Row_Id" in the select
query,I can't filter the records.(In the VO if I unselect the ROW_Id,
got an error like"Row_id missing in the view oject")Because of
this issue am not able to delete the records.Due to
this problem,delete works only in random.
Please share the ideas..
Thanks
Swapna

Try selecting a different attribute for EntityB as a key field

Problems with deleted Podcasts from iPod Touch (Проблема с удалением)

У меня проблема с удалением подкастов с моего iPod Touch (версия прошивки 2.2, iTunes 8.0.2.20)
Некоторое время назад я скачал через сам Ipod некоторые подкасты, в другое время с компа, после все синхронизировал и все уровнялось (переписалось недостающее туда и обратно). Сегодня я хотел все удалить и в настройках синхронизации моего iPod я просто снял галочку синхронизации и применил. После все плейлисты касательно подкастов были очищены, а вот сами файлы остались, т.к. в первую очередь суммируя то что у меня должно было быть и что было разница была в 3 гига.
С помощью SharePod решил проверить действительно ли так то что я думаю и оказалось что он увидел эти файлы, которые должны были быть удалены, но т.к. версия базы данных иная чем то что он может понимать программа, удалить я их не могу. Прошу помочь.
I have a problem with the removal of podcasts on my iPod Touch (firmware version 2.2, iTunes 8.0.2.20)
Some time ago, through the iPod Touch I downloaded some podcasts, at other times from the computer, after all synchronized (rewritten podcasts from my computer and ipod). Today I want to delete everything and in sync to my iPod settings, I took a tick synchronization and applied. After all the playlists from podcast has been cleared, but the files themselves remain as the free space was at 3 Gb fewer regulations.
Using SharePod checked their version and proved that SharePod saw no deleted files to be erased, but because version of the database other than the fact that he could understand the program, I can not remove them. Please help.

You can only sync with one computer. I would backup to one computer and then restore from backup.
iOS: Back up and restore your iOS device with iCloud or iTunes

Problems with deleting mail in Mail-Yoesmite 10.10.1

Each day, I have a problem where Mail will not delete messages that I have deleted. The messages I want deleted seems to be in the Trash folder and appear to be deleted when I select the delete button. But when I click out to another folder and then come back to the Trash folder, those messages are still there.
T have tried doing this 3-4 times, with the same result.
I have since found that quitting the Mail program resolves this problem and so each day, I have to quit Mail in order to get it to function correctly.
Clearly, there is a problem with this piece of software, a piece of software which is one of the worst things Apple has ever made and which has been driving me nuts for years.

I can't find a way to edit my question so I am adding further info as a reply.
In addition to not deleting emails, Mail also does not always show me the most recent emails.
When I quit the app and re-open it, a bunch of new emails suddenly appear, all with different time stamps.

Problems with Deleting Confirmation Messages on a 8830 device

I am new to this forum but have a technical issue on a blackberry 8830 device with deleting confirmation messages.
Scenario:
User is replying to users with a confirmation of message read reciept from the blackberry. It copies the reciept in both his exchange account and his blackberry device. He can delete the confirmation of the reciept as usual but here lies the problem when he deletes it on either the blackberry or the exchange account side it won't reconcile it even though the reconcile is setup for both handheld and wireless and wireless email reconcile is turned on. He also has the desktop manager software running on his pc and its still not correcting it.
The BES server is on release 4.0.6.12 with a Microsoft 2000 Exchange Server (I'm thinking this is my issue but don't have any supporting evidence to support it).
Can someone please provide some insight as to what the problem might be in this scenario.

Thanks so much for answering! It looks like that cleared up the problem

Synchronisation problem with deleting an appointment from an iterating appointment

Hello,
I have a problem with the synchronisation of appointments from iCal (Mac OS X 10.7.3) to my iPhone 3GS (iOS 5.1) with iTunes (10.6.1 (7)).
Scenario:
I create an iterating appointment (e.g. each week) in iCal. Than I synchronise these appointments with my iPhone. After that I delete one specific appointment (not the whole iterating appointments) in iCal and synchronise the calendar via iTunes again.
Now the appointment I deleted in iCal still exists on my iPhone. If I choose the option "replace all appointments on my iPhone" in iTunes it doesn't work and the deleted appointment still exists in my iPhone calendar.
Any solutions for this problem? Or is it a known bug?

Hi,
try to make the request status into red in monitor and then delete. if the request deletion taking long time try to change the QM status in to green. i think then the delete box will dissaper. again start from begin convert the status to RED in monitor for that particular request. and then delete it.

Problem with iWeb domain titles

Greetings, I'm hoping someone can help me. I recently replaced my old website with one that I created in iweb. However, as you can see from the screenshot, every page has a redundant and rather unnecessary title tab for the website address. I upload to my host via FTP, and I'm wondering if that has something to do with it. Any help is greatly appreciated. Thanks!
aaron

That is perfectly normal in iWeb and if you want it to change, don't name your site with your domain name within iWeb.
iWeb produces a sitename and you cannot leave this blank so when you publish to a local folder you get your site folder with the same name and the index.html file.
All you need do is to re-name your site in iWeb and then publish to a local folder and just upload that new site folder with the new name. Remember also that iWeb produces two index files, one that sits inside the site folder itself and then the other one that just points in towards the first page of the site and must sit outside the site folder.
This is totally normal in iWeb and is nothing that you have done - just change your site name to something different and more applicable to your site and then you won't get the double domain name.

Problem with a Domain applied to an Entity attribute

I have created a validation domain that has the following logic in it. It is simply to check to see if the account number is in the correct format. I am trying to determine if validation domains at the entity level will serve our purpose. The custom code portion of the domain is listed below.
/**Implements domain validation logic and throws a JboException on error.
This code checks that the account number is in the format 99999.9999.99 July 10, 2007 mb
protected void validate() {
if (mData != null) {
int length = mData.length();
if (length < 9) {
throw new JboException("Account Number must be at least 9 long in the format of 99999.9999 or 99999.9999.99");
char currentChar;
for (int i = 0; i < length; i++) {
currentChar = mData.charAt(i);
if (i == 5 && currentChar != '.') {
throw new JboException("Account Number must be in the format of 99999.9999.9.");
When I apply it to the entity object initially it works well and is listed once on the Entity Attribute Type drop down list. When I test the Application Module at the Entity level (i.e. right click the Application Module and select "test", it initially works well.
Then without explanation, I try to click on the attribute that has this domain applied to it, and I get the following NullPointerException error with the domain listed twice on the Entity Attribute Type drop down list. I can only remove the domain assigned to the Entity Attribute in the structure pane.
Has anyone else seen this?
Mary
UofW
java.lang.NullPointerException
     at oracle.jbo.dt.ui.entity.EOAttributePanel.enableDomainFilter(EOAttributePanel.java:1142)
     at oracle.jbo.dt.ui.entity.EOAttributePanel.updateControls(EOAttributePanel.java:517)
     at oracle.jbo.dt.ui.entity.EOAttributePanel.setAttribute(EOAttributePanel.java:871)
     at oracle.jbo.dt.ui.entity.EOAttributeTabPanel.updateControls(EOAttributeTabPanel.java:202)
     at oracle.jbo.dt.ui.entity.EOAttributeTabPanel.setAttribute(EOAttributeTabPanel.java:189)
     at oracle.jbo.dt.ui.entity.EOEditAttributeTabPanel.attrValueChanged(EOEditAttributeTabPanel.java:316)
     at oracle.jbo.dt.ui.entity.EOEditAttributeTabPanel.enter(EOEditAttributeTabPanel.java:104)
     at oracle.jbo.dt.ui.main.dlg.DtuWizard.selectPage(DtuWizard.java:724)
     at oracle.jbo.dt.ui.main.dlg.DtuWizard.selectPage(DtuWizard.java:699)
     at oracle.jbo.dt.ui.entity.EOWizard.selectPage(EOWizard.java:213)
     at oracle.jbo.dt.ui.main.dlg.DtuWizard.newMddPageSelected(DtuWizard.java:745)
     at oracle.jbo.dt.ui.main.dlg.DtjMddTraversable.onEntry(DtuMddNavigable.java:266)
     at oracle.ide.panels.MDDPanel.enterTraversableImpl(MDDPanel.java:926)
     at oracle.ide.panels.MDDPanel.enterTraversable(MDDPanel.java:899)
     at oracle.ide.panels.MDDPanel.mav$enterTraversable(MDDPanel.java:106)
     at oracle.ide.panels.MDDPanel$Tsl.updateSelectedNavigable(MDDPanel.java:1348)
     at oracle.ide.panels.MDDPanel$Tsl.updateSelection(MDDPanel.java:1216)
     at oracle.ide.panels.MDDPanel$Tsl.actionPerformed(MDDPanel.java:1210)
     at javax.swing.Timer.fireActionPerformed(Timer.java:271)
     at javax.swing.Timer$DoPostEvent.run(Timer.java:201)
     at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:461)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:153)
     at java.awt.Dialog$1.run(Dialog.java:515)
     at java.awt.Dialog.show(Dialog.java:536)
     at java.awt.Component.show(Component.java:1300)
     at java.awt.Component.setVisible(Component.java:1253)
     at oracle.jbo.dt.ui.main.dlg.DtjDialog.setVisible(DtjDialog.java:137)
     at oracle.jbo.dt.ui.main.dlg.DtjMddWizardDialog.setVisible(DtuWizard.java:2376)
     at oracle.bali.ewt.dialog.JEWTDialog.runDialog(Unknown Source)
     at oracle.bali.ewt.dialog.JEWTDialog.runDialog(Unknown Source)
     at oracle.jbo.dt.ui.main.dlg.DtjDialog.showDialog(DtjDialog.java:115)
     at oracle.jbo.dt.ui.main.dlg.DtjMddWizardDialog.showDialog(DtuWizard.java:2315)
     at oracle.jbo.dt.ui.main.dlg.DtuWizard.createMddWizard(DtuWizard.java:500)
     at oracle.jbo.dt.ui.main.dlg.DtuWizard.setVisible(DtuWizard.java:321)
     at oracle.jbo.dt.ui.entity.EOWizard.setVisible(EOWizard.java:223)
     at oracle.jbo.dt.ui.main.dlg.DtuWizard.showDialog(DtuWizard.java:299)
     at oracle.jbo.dt.jdevx.ui.JdxMenuManager.invokeEOWizard(JdxMenuManager.java:970)
     at oracle.jbo.dt.jdevx.ui.JdxMenuManager.invokeEntityWizard(JdxMenuManager.java:948)
     at oracle.jbo.dt.ui.main.DtuMenuManager.doEditMenuAction(DtuMenuManager.java:1413)
     at oracle.jbo.dt.jdevx.ui.JdxMenuManager.handleDefaultAction(JdxMenuManager.java:407)
     at oracle.ide.controller.ContextMenu.fireDefaultAction(ContextMenu.java:343)
     at oracle.ideimpl.explorer.BaseTreeExplorer.fireDefaultAction(BaseTreeExplorer.java:1576)
     at oracle.ideimpl.explorer.BaseTreeExplorer.dblClicked(BaseTreeExplorer.java:1913)
     at oracle.ideimpl.explorer.BaseTreeExplorer.mouseReleased(BaseTreeExplorer.java:1934)
     at oracle.ideimpl.explorer.CustomTree.processMouseEvent(CustomTree.java:176)
     at java.awt.Component.processEvent(Component.java:5253)
     at java.awt.Container.processEvent(Container.java:1966)
     at java.awt.Component.dispatchEventImpl(Component.java:3955)
     at java.awt.Container.dispatchEventImpl(Container.java:2024)
     at java.awt.Component.dispatchEvent(Component.java:3803)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4212)
     at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3892)
     at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3822)
     at java.awt.Container.dispatchEventImpl(Container.java:2010)
     at java.awt.Window.dispatchEventImpl(Window.java:1774)
     at java.awt.Component.dispatchEvent(Component.java:3803)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:463)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)

Frank:
Thanks so much for your reply. I apologize for not saying that my JDeveloper version is 10.1.3.1.0.
And Yes, the error is NOT in the tester, it is received when I click on the Attribute that has the domain applied to it in the Entity Object Editor in the Applications Navigator therefore locking up that Entity Object Editor.
I can only remove the domain from that entity through the structure pane attribute editor AND when I look at the available entity attribute types drop down list, there my domain (which happens to be called UWAcctNumDomain) is listed twice with the path on my 'C' drive preceding the name. When I first created the domain, it was only listed once. Somehow it is now listed twice and that may be the cause of the error.
I am testing the usability of domains for our purposes. We are establishing re-usable business rules for our Oracle tables and establishing them in a Entity Object jar file with all relationships, column titles, history columns, etc. We would like to define as much as possible at the Model layer so that when they are re-used, those business rules are already established and therefore this will save development time.
The reason I used the Java Code instead of Expression Language is simply that I took an example of a formatting domain from page 311 of the Oracle JDeveloper 10g Handbook and customized it for our account numbers.
Any input you have is greatly appreciated.
Mary
UofW

Problem with deleting and recreating domain

Dear All
I am compltely confused to delete and purge domain with commadmin below you can see output from.
./msuserpurge -v -dmycom-int.com -g0 command.
Domain Name : mydomain.com
mailDomainStatus: active
inetDomainStatus: deleted
User Name mailUser inetUser Modified Time Action
total: 0 | deleted: 0 | purged: 0 | pending: 0 | error: 0
when I try to purge the this domain with commadmin it generate the nonleaf error.
[root@beagle1 bin]# ./commadmin domain purge -dmydomain.com
Enter login ID: admin
Enter login password: adminadmin
FAIL
Unable to remove entry.::LDAP Error:NOT_ALLOWED_ON_NONLEAF domain => mydomain.com
I am really confused, I don't know how I have to find out what is inside this domain which is not empty to be deleted.
any help would be appreciated.
Best regards
Mo

Didn't I just respond to this same question?
your error message claims that there is something in your domain, so it can't remove it.
Usually, it's a user. There's no way I can tell what's in there. You can use the Directory Console to see, though.

Problem with deletion of files

hi
i have a very strange problem, so the application is swing app, i use intellij IDEA this is only informative.It is for uploading files to ftp, at the end of the process i must delete files, the problem is that the last one file doesn't delete.The strange is that when i run the application from idea it works ok, but when i run the application from jar it can't delete the last file
i make jar file with ant. the difference between the running application from idea and from the jar is that in idea i create instance of Login (JFrame) and it is on, from the jar there is a method that at run time execute the following command in a new thread : "java -Xms128M -Xmx512M"
+ " -cp ./;ProcessingTool.jar; + "(here is adding all libs to class path...)"
+ " dialogs.Login");
i thought that i have not close a stream, but why then from idea it works, and from jar doesn't.
please help!!!

i have used adobe reader 8 and now 9. However, i am having trouble opening form files from http://www.mca.gov.in which is a government site.
the error i get is "this document enabled extended features in adobe reader. the document has been changed since it was created and use of extended featuresis no longer available. Please contact the author for the original version of this document."
please help as i am able to open these files on another computer running older adobe reader version
thanks in advance
regards,
ashish ahuja

Problems with deleted domain

Similar Messages

Maybe you are looking for