Problems with Distribution Points, "in Progress", etc

I have two SCCM 2012 R2 networks. They have similar problems with DPs. Each network has two servers and each server has a DP. Server01 is site server and primary DP on each network.
1) On Server01 on both networks in "DP Configuration Status" the icon is the upward green arrow (which I think in "In Progress") and in the details tab a weekly forced reboot package says "starting to process content" on NetworkA
and "processing content for site server" for NetworkB and for status they both say "In Progress". Is this because it a weekly recurring package?
2) On Server02 for NetworkB I have two "failed to distribute content" messages and neither has details available. On message is a week 5 days old. Pkgxfrmgr.log only has errors about "pulldpqueryresult failed to execute wmi query...".
3) On Server02 for NetworkA I have two "failed to update package" messages about updating Server02. The only errors in pkgxfrmgr.log are "pulldpquery failed".
4) On NetworkA I mistakenly had checked "enable prestaged content" and later turned it off. Now I have a bunch of hung "In Progress" messages about Server02 needing content manually prestaged. How can I kill these messages?
Help much appreciated.
Ben JohnsonWY

Yes, I know this is an old post, but I’m trying to clean them up. Did you solve this problem, if so what was the solution?
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Similar Messages

Problem with decimal point in Korea and Japan

Hi all,
I have one problem with decimal points.
I need to change in my out put cuurency values as per japan or korea standards.
Please help me is there any function module for this one.
program using alv grid display.
i use write statement but it is not working. Because
data: L_AMT type glpca-hsl,
         G_AMT TYPE CHAR15.
CURR this value is 'JPY'.
WRITE L_AMT CURRENCY CURR TO G_AMT.
here i need to do
L_AMT = G_AMT.   "" going to runtime error.
if i taken like
data: L_AMT TYPE CHAR15,
         G_AMT TYPE CHAR15.
CURR this value is 'JPY'.
WRITE L_AMT CURRENCY CURR TO G_AMT.   "" it is not working
Regards
margani

Hello,
This is pretty basic, whenever you've currency & quantity fields you need to pass the corres. reference fields.
In your case you need to populate the cfieldname & ctabname fields of the FieldCat.
BR,
Suhas

Problem with distribution model receiver ports

Hi,
I am facing a problem with distribution model.
I am using Distribution model for material classification data. I am sending my classification data using CLFMAS message type to one of the receiver. Again another person also sending classification data to another receiver.
But both objects will run at different times.
Problem is for every run and every change it is creating 2 idocs instead of 1 idoc.
I am able to create an IDOC with my changes for classifications. But it is creating 2 idocu2019s instead of creating 1 idoc. Because of there is another distribution model with same message type with different receiver port has been configured. I.e. reason it is creating 2 idocu2019s and sending to both the revivers.
When I run my changes It needs to create 1 idoc and send to my receiver port. If another person run his job it needs to create another idoc.
So how will I filter distribution model based on receiver port? it needs to create only 1 IDOC ..

Hi kotesh,
A similar issue.
check if this will help.
Do the following:
Go to TOOLS>ALE Development>IDoc Type Development> WE81 and create a new message type and give it a different name - say ORDERS2. Use WE82 to link it to an IDoc Type - say ORDERS05. So now you will have two message types linked to the same IDoc type. Each message type can now be referred in different logical systems without any clashes.
Now you can use BD64 to build your model using message types ORDERS and ORDERS2 without getting the multiple recepient error message.
Then use WE20 to set up each partner profile using your defined output conditions in message control to trigger the creation of the IDoc. Now you will beable to send the same Idoc type to different recepients.
source:http://sap.ittoolbox.com/groups/technical-functional/sap-interfaces/sap-distribution-model-3008763
Regards,
SuryaD.

I purchased Microsoft Office for Mac through the Apple website.. I have downloaded all from the disk into my Mac, no problem with all the other Word etc, but Outlook is asking for the key number: I have put it in but its obviously not the right one...????

I purchased Microsoft Office for Mac through the Apple website.. I have downloaded all from the disk into my Mac, no problem with all the other Word etc, but Outlook is asking for the key number: I have put it in but its obviously not the right one...???? In the box with the disk came the product key, have put it in and it doesnt work. Please help..x

unfortunately - you can not. you can't even buy outlook by itself at microsoft's own website.
does it have to be outlook? maybe you can get away with using something else that's outlook compatible.
how about trying Thunderbird for Mac OS?
or maybe you can call apple and let them know you purchase the wrong version - they might give you a break and just pay the difference for the home and business version.
good luck

Problem with Vanishing Point

hello!
I've got a problem using Vanishing Point filter in Photoshop CS4. When I load this filter an error message pops saying "The operation could not be completed"
I attach a screen cap of the error. Somebody can help? thanks.

I run into this problem with Vanishing Point on about a quarter of the files I run the filter on. I can initially create a grid and do one transform, but the next time I try to run the filter I get the error, "The operation could not be completed". Then the error seems to stay attached to the file. I can run the filter on another file, but even if I close and reopen the file, I still can't run the filter. Even doing Save As and renaming the file doesn't rid it of the error.
This has been the case since VP was introduced. I'm now on CS4. MacPro Dual-Core, 8GB Ram.
I've tried changing the memory allocation to 55% with no change.
I see that this has been addressed before in the Forum with no solution, Chris Cox care to wade in?
This is a potentially valuable tool if it were implemented better.
Craig

Replace secondary site with distribution point

I have a client that would like to remove some unnecessary secondary sites and replace them with distribution points on the same hardware. Is there a built-in way of doing this from the SCCM console? What should be taken into consideration before doing
such a thing?
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

No there is no built in way to do this. It's essentially an uninstall (of the Secondary site components) and an fresh install of the DP. Content and boundaries are the only real considerations; you may want to use pre-staged content to essentially
cache a local copy so that it doesn't have to be replicated across the WAN. Technically, if you leave the sccmcontentlib in place, it may be able to reuse this but that's not supported so it may or may not work.
Jason | http://blog.configmgrftw.com

Problem with distribution of packages to distribution point servers

Hi all,
I have found problem during distribution of package to many of DP's servers in my organization. Strange is... only package generate problems - applications or updates packages are sending without any problems.
On System Status->Component status SMS_PACKAGE_TRANSFER_MANAGER there is:
Message ID: 8211 "Package transfer manager failed to update the package "XXXXXX".
I have checked PkgXferMgr.log and there is:
ExecStaticMethod failed (80041001) SMS_DistributionPoint, FinalizeContent
CSendFileAction::SendFiles failed; 0x80041001
Notifying pkgXferJobMgr
Sending failed. Failure count = 45, Restart time = 2/13/2014 1:05:14 PM Romance Standard Time
Next I have checked smsdpprov.log on DP server and there I have found many instances of this error:
[F38][Thu 02/13/2014 12:35:27]:CopyFileExW failed for E:\SCCMContentLib\FileLib\F6FB\F6FB39A8578F19616570D5A3DC7212C84A9DA232B30A03376BBF08F4264FEDF2 to \\?\E:\SMSPKGE$\XXXXXXXX\DE29E824-4B10-4800-A501-BC66C6EC26D3\x64\WdfCoInstaller01011.dll
[F38][Thu 02/13/2014 12:35:27]:FileCopy failed; 0x80070020
[F38][Thu 02/13/2014 12:35:27]:CFileLibrary::CopyFileA failed; 0x80070020
[F38][Thu 02/13/2014 12:35:27]:CContentDefinition::CopyFileA failed; 0x80070020
[F38][Thu 02/13/2014 12:35:27]:CContentDefinition::ExpandContentDefinitionItems failed; 0x80070020
[F38][Thu 02/13/2014 12:35:27]:CContentDefinition::ExpandContentDefinitionItems failed; 0x80070020
I'm going mad with this :-( Thank you for all reply.

Try this: Powershell Script
$SiteCode =
"XXX"
$PackageID = "XXX00003"
     $distpoints =
Get-WmiObject
-Namespace
"root\SMS\Site_$($SiteCode)" -Query
"Select * From SMS_DistributionPoint WHERE PackageID='$PackageID'"
        foreach
($dp in$distpoints)
                $dp.RefreshNow
=$true
                $dp.Put()
Thanks, Prabha G

Intermittent problem with access point (WAP321)

We hane an intermittent problem with our Wifi access point WAP321. Suddenly, all clients are unable to access Internet, server and local network. The signal is 100%. The message is no internet connection or limited connection (on all device, Iphone, computer, etc.). When I check to Ip configuration, the ip adress have change for loca 169.x.x.x. The only way to resolve is to reboot the access point. (POE).
It seem that access point don't relay information to rest of network. Strange.
The access point is connected to a simple unmanaged switch. This switch is connect to router and server. The serveur (Win2008) is the DHCP Server and DNS Server.
Can you help me to find a solution. ?

This may be the problem;
Devices: WAP discovers devices with ASSOC method that don't have an IP
CSCtz20891
Description
Symptom:
The OnPlus topology will show nodes with no IP address. Devices associated to WAP121/321 VAP/SSID not on the management VLAN will display topology nodes with with no IP address.
Conditions:
This occurs when the client associated to the WAP121/321 but is on a VLAN other than the management VLAN. In this case the WAP client information can be collected on the management VLAN, but the clients cannot be ARP/ping to validate.
Workaround:
None

MSI P67A-G45 (B3) - Problems with USB3 & Updates & card reader, etc.

Hi, I have the MSI P67A-G45 (B3) motherboard and I'm still having problems with it (as from day one).
1) I still seem to have some problems with stability with the USB. I updated the drivers for the Renesas USB to the latest (2.1.39.0) from the station-drivers website,
I was thinking of grabbing the firmware update as well. But I wasn't sure if I should. The page also shows firmware updates for uPD720200 & uPD720200a, and I'm not sure which one is in my motherboard. Should I update? If so, which one is in my MB, uPD720200 or uPD720200a?
2) I'm also having trouble updating the Intel ME Driver and the Intel INF Update (although I'm googled that the INF update doesn't really matter).
3) I can't seem to get the firewire port working with my WD Home 2TB external HDD (it works through USB though).
4) I have an old internal flash card (SDHC/MS/MMC/etc.) reader from another desktop that I wanted to add to my MSI one. Is it possible to do so? Where would I plug it in?
5) Is there anything else I need to update: software or firmware? I've generally updated the stuff listed in the Live Update (except for the stuff I never installed).
Thanks. Please answer any of the questions if you can.

Quote from: xmad on 13-June-13, 01:03:41
Update the firmware and re-test:
>>Firmware and BIOSes<<
Scroll to the bottom of the page at that link and flash the USB controller firmware.
Thanks, Renesas update seems to have taken. Let's hope it's more stable.
I have a Core i5-2500k Sandybridge processor. Is there a point to me updating the BIOS & Management Engine to the latest? The support page for my MB says don't bother unless I have an Ivybridge processor?
Quote from: XFM on 13-June-13, 05:56:07
What PC is the card reader from? Some of those card readers such as from Sony & Dell will only work in the respective brand PCs they came from and not any other. I have one I removed from a Sony and it will not work in my rig. If the card reader is a normal 3rd party model purchased from a store it should work but may require drivers from the manufacturer of it. As far as plugging in a card reader they go to an internal USB header on the MB.
The old desktop was from computer maker Cisnet.
I plugged the 5-hole (or rather 4 holes, since one is blank) plug into JUSB1, but it seems to keep connecting and disconnecting in Windows 7 x64. Windows made drives for all 4 card slots, but whenever I put a memory card in, it would just connect and disconnect and the memory card would never show up. Is it a driver problem?
It's a Foxconn internal card reader, except I can't seem to figure out which model it is despite googling (not indicated anywhere on the card reader).
Don't really want to cough up $15-$20 for a new card reader, so I'm hoping to get this one to work. Thanks.

Adobe Bridge CC -- ongoing problems with Photo Downloader (scrolling, crashing, etc)

Hello Community,
Thanks in advance for any suggestions to improve my Bridge CC experience! I have recurring problems, esp. when using the Photo Downloader (in other words, daily problems) -- scrolling either up or down to select photos is a nightmare, as the scrolling either jumps or stops without rhyme or reason, making the photo selection process tedious and maddening. Additionally, if I spend more than a few minutes selecting which photos to load to my computer (i.e., from iPhone), Bridge crashes.
I have been using Bridge for about a decade, and never EVER had a single problem with it until CC. I have a 2013 MacBook Pro, all software updated, etc. No fancy bells or whistles, no peripherals, etc... Just trying to get my pictures from phone and tablet to the computer.
Many thanks.

Moving discussion to Bridge forum.

Problem with Black Point adjustment

When making Black Point adjustments (with hot and cold highlights enabled) my photos suddenly turn completely blue. If I hold click the slider button, I can see the photo again as expected.
I also notice this histogram is empty.
I have the same problem with both my Nvidia and Radeon graphics cards.
This problem has started since my upgrade to 10.5.7
Has anyone else experience this? ...am I doing something wrong?

I think I have found the problem. For some reason the Black Point values were incrementing in much higher values than before.

Problem with Access Point app

Yesterday I experienced a problem with my internet sharing where it wouldn't start and gave me an error: Connection not shared, Internet sharing isn't currently available
. I ran across an article on wpcentral.com where they suggested installing the Access Point app from this thread:
http://discussions.nokia.com/t5/Pool-of-Knowledge/Nokia-Windows-Phone-8-App-Updates/td-p/1640082
Now I've done that and I see 3 profiles in the app, only 2 are LTE. Activating either of those LTE profiles now gets me an error when trying to internet share that looks like this: Connection not shared, To enable tethering on this device, go to att.com/mywireless or dial 611. When I use the 3g access point profile I get the same message I was getting yesterday.
At this point I don't think this app is doing anything for me. I dont' use multiple sims, I'm not a world traveller. I also don't know which profile I should be on. I'm clearly in over my head and would like to just take a step back. However, I can't see a way to uninstall the app as it's now in settings. How do I get myself back to where I was yesterday?
And for bonus points, does anybody know what the original error I was getting means?
Thanks,
Joel

Hi Adrian,
Yes, I've tried a soft reset to no avail. I've gone to both the AT&T store and the Microsoft store and neither of them have any thoughts on what's going on. At this point I think I will need to replace the hardware since I've not found a solution from anyone.
Thanks for you help.
Joel

Generic delta has problem with delts pointer time stamp

Hi All,
We have generic delta data source with Delte pointer as Time stamp. We have not used any safety limits. We are loading the data to DSO and using Additive delta. But the problem is when delta flag is set, there might be a case where some records still being inserted to table with lower time stamp. These records are not being fetched in next delta.
We are planning to keep a safety upper limit of 5 min so that those records can not be missed. But we have a doubt as it is a Additive delta duplicate records will be loaded. If we make the delta to 'new status to changed records', it is going to work?? Any other things we have to check when we make this changes??
Thanks
Haaris

Hi
If you had selected additive delta then you can load data to DSo with addition mode only. No overwrite possible.
If you want to select new or changed status then you can load to DSO with overwrite mode only.
Additive or changed delta depends on your requirement because if you want to add data to the DSO then you can go ahead with additive otherwise you have to use DSO with overwrite mode only.
You can either give safety upper limit or lower limit but if you give safety lower limit then you can only load data to DSO with overwrite mode because there could be some duplicate records.
Hope it clarifies.
Regards
Sadeesh

New Site Server with Distribution Point & Software Update Point Roles not pulling SUGs

I just set up a new server & installed the DP & SUP roles on it. I am getting the following in the log this is just a small sample as its kind of repetative:
Report state message 0x8000094F to MP SMS_Distribution_Point_Monitoring 3/28/2014 1:34:45 PM 6444 (0x192C)
Report Body: <ReportBody><StateMessage MessageTime="20140328183445.000000+000" SerialNumber="0"><Topic ID="FPP00002" Type="901" IDType="0"/><State ID="2383" Criticality="0"/><UserParameters
Flags="0" Count="2"><Param>FPP00002</Param><Param>["Display=\\FPPSCCM02.FPP.WUCON.WUSTL.EDU\"]MSWNET:["SMS_SITE=FPP"]\\FPPSCCM02.FPP.WUCON.WUSTL.EDU\</Param></UserParameters></StateMessage></ReportBody>
SMS_Distribution_Point_Monitoring 3/28/2014 1:34:45 PM 6444 (0x192C)
Report status message 0x8000094F to MP SMS_Distribution_Point_Monitoring 3/28/2014 1:34:45 PM 6444 (0x192C)
Status message has been successfully sent to MP from remote DP SMS_Distribution_Point_Monitoring 3/28/2014 1:34:45 PM 6444 (0x192C)
Retry 10 times SMS_Distribution_Point_Monitoring 3/28/2014 1:34:45 PM 6444 (0x192C)
Start to evaluate all packages ... SMS_Distribution_Point_Monitoring 3/28/2014 1:34:45 PM 6444 (0x192C)
Start to evaluate package 'FPP00002' version 0 ... SMS_Distribution_Point_Monitoring 3/28/2014 1:34:45 PM 6444 (0x192C)
Report status message 0x4000094C to MP SMS_Distribution_Point_Monitoring 3/28/2014 1:34:45 PM 6444 (0x192C)
Status message has been successfully sent to MP from remote DP SMS_Distribution_Point_Monitoring 3/28/2014 1:34:45 PM 6444 (0x192C)
Failed to evaluate package FPP00002, Error code 0x80070002 SMS_Distribution_Point_Monitoring 3/28/2014 1:34:45 PM 6444 (0x192C)
Report state message 0x8000094F to MP SMS_Distribution_Point_Monitoring 3/28/2014 1:34:45 PM 6444 (0x192C)
Report Body: <ReportBody><StateMessage MessageTime="20140328183445.000000+000" SerialNumber="0"><Topic ID="FPP00002" Type="901" IDType="0"/><State ID="2383" Criticality="0"/><UserParameters
Flags="0" Count="2"><Param>FPP00002</Param><Param>["Display=\\FPPSCCM02.FPP.WUCON.WUSTL.EDU\"]MSWNET:["SMS_SITE=FPP"]\\FPPSCCM02.FPP.WUCON.WUSTL.EDU\</Param></UserParameters></StateMessage></ReportBody>
SMS_Distribution_Point_Monitoring 3/28/2014 1:34:45 PM 6444 (0x192C)
Report status message 0x8000094F to MP SMS_Distribution_Point_Monitoring 3/28/2014 1:34:45 PM 6444 (0x192C)
Status message has been successfully sent to MP from remote DP SMS_Distribution_Point_Monitoring 3/28/2014 1:34:45 PM 6444 (0x192C)
Report status message 0x40000952 to MP SMS_Distribution_Point_Monitoring 3/28/2014 1:34:45 PM 6444 (0x192C)
Status message has been successfully sent to MP from remote DP SMS_Distribution_Point_Monitoring 3/28/2014 1:34:45 PM 6444 (0x192C)
DP monitoring finishes evaluation. SMS_Distribution_Point_Monitoring 3/28/2014 1:34:45 PM 6444 (0x192C)
Failed to evaluate some packages after 10 retry SMS_Distribution_Point_Monitoring 3/28/2014 1:34:45 PM 6444 (0x192C)
The Console shows for the DP that it's waiting for content and I don't see where I can create a Prestage Package
# When I wrote this script only God & I knew what I was doing. # Now, only God Knows! don't retire technet http://social.technet.microsoft.com/Forums/en-US/e5d501af-d4ea-4c0f-97c0-dfcef0192888/dont-retire-technet?forum=tnfeedback

D:\SMS_DP$\sms\logs\smsdpmon.log
This is the 2nd server in our SCCM 2012 Sp1 Hierarchy. It is set up with the following Site System Roles:
Component Server
Distribution Point
Site System
Software Update Point
It is Prestaged Enabled. My intent is that the client systems @ the location where this DP is located will use it to pull their Microsoft Updates from as well as content for any Applications we push to them rather than going over the WAN to the Primary
Site Server.
IN Distribution Point Configuration Status. the console shows "Failed to update package" & "Packaget Transfer Manager failed to update the package "yxz00040". Version 3 on Distribution Point server.my.domain.com review pkgxfermgr.log for more information
about this failure."
It also goes on toe list 2 possible causes and solutions
Site servers does not have sufficient rights to the source directory.
(Site server account is a member of local Administrators on Primary)
Not enough disk space available
(I have over 1TB of available space and primary site server has only 150GB available for entire content repository, both applications and sofware updates.)
# When I wrote this script only God & I knew what I was doing. # Now, only God Knows! don't retire technet http://social.technet.microsoft.com/Forums/en-US/e5d501af-d4ea-4c0f-97c0-dfcef0192888/dont-retire-technet?forum=tnfeedback

I cannot install itunes to my windows 7 computer. I've deleted everthing apple related (in order recommended). I get a message each time that states "There is a problem with this windows installer package. etc.. What should I do?

I've also spent hours on the phone with both apple and windows technical support specialists. This is very clearly not a windows issue. I've given my computer a clean boot, disable my antivirus and firewall, and then attempted to download (yes, from apple's website). I've delete all of the programs (in the necessary order) and then attempted reinstalling with absolutely no luck. I'm starting to think that there's absolutely nothing I will be able to do. I've also never been able to fine "apple software updater or apple software update on my computer, which is particularly odd because I haven't found a post in this community that answers that question. No, "apple software update" cannot be found by accessing the start menu or anything in the "C drive". Apple software update is also never included in the itunes download package that I get from apple's website (the others, such as bonjour, apple application support, and apple mobile support are). No matter what I do, I always get the mesage at the end of the download, "There is a problem with this windows installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor."
This may or may not be related to the "apple software update" issue.

Apparently it's an itunes issue. I just tried to update and got the same issue. Called att to activate my iphone 4s and they say they can do the swap but apple is telling them itunes is down atm. So will have to wait

Problems with Distribution Points, "in Progress", etc

Similar Messages

Maybe you are looking for