Problems with envelopes in OfficeJet 5610

I used  WordPerfect mail merge to generate a file of over 100 envelopes. I have tried printing with several brands of envelopes that advertise as being suitable for inkjet printers. None of them feed reliably through my OfficeJet.  I set the paper size as "No. 10 envelope," set the printer feed to "right" to match the placement of envelopes in the tray, and moved the paper guide over to the edge of the paper.  I am feeding envelopes one at a time to reduce errors. The envelopes feed eratically. Often part of the return address runs off the edge of the paper. Sometimes the envelope twists as it feeds in, and everything comes out skewed, plus there is a wrinkle in the envelope. Sometimes the envelope just jams in the printer.  Is there anything else I can do?

I upgraded to an OfficeJet 8500. It feeds envelopes fairly reliably, although I lost the ability to print postcards, which the older printer could handle.
My new envelope problem is that the printer won't print the return address closer than 0.6 inch from the left margin. Supposedly, the printer will handle a much smaller margin. In practice, it simply doesn't print any content closer than 0.6 inch to the edge.

Similar Messages

  • Having problem with my hp officejet j6480 all-in-one printer

    i am having problem with my HP officejet j6480 all-in-one printer it prints very slow
    the operating system is windows 7  32-bits i download full driver software but that did not fix the problem
    This question was solved.
    View Solution.

    Hi - Does it print slowly from all applications or just certain ones?  In either case, you can try following the steps in this document.
    In addition, try going into Control Panel, Printer, right click on the printer and choose Printer Properties.  Click on the Advanced Tab and select Print Direcly to the Printer.
    Hope that helps.
    Say Thanks by clicking the Kudos thumbs up. Please mark the post that solves your problem as an Accepted Solution so other forum users can utilize the solution.
    I am an HP employee.

  • Problems with installing HP OfficeJet Pro L7590 driver All-in-One

    Hello HP team.
    Having problem with installing driver for HP Officejet pro L7590.
    Starting the process the process bar goes to the end 100% and then disappear.
    After that nothing happens.
    Rebooting doesn't help.
    Windows 7-64

    Thanks for getting back to me!
    Lets try some more steps:
    Uninstall, level 3 for HP PC or level 4 for non-HP PC.
    1. Click Start and type %temp% in the run field and click OK.
    2. Look for, and open the folder starting with 7z (Example: 7zS2356) (if there is more than one 7z folder, try the most recent one)
    3. Open folder Util
    4. Open folder CCC
    5. Run the uninstall_ L4.bat for a non-HP PC or run the Uninstall_L3.bat for a HP PC
    6. When the uninstall has completed restart the computer
    Try to install again using the HP Printer Install Wizard for Windows
    Let me know how this goes please
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Scanning Problems with an HP OfficeJet Pro 8500

    I have an iMac running the latest version of Snow Leopard. I have had the HARDEST time, since purchasing my iMac in Dec 2010, scanning documents with my HP OfficeJet Pro 8500 printer. What happens is usually one of two things: 1) Only half of the page fills the scan window, or; 2) The entire document fills the scan window BUT the SCAN button is greyed out so that it cannot be selected!
    Yes, I have done the whole delete the current printer drivers, get the drivers through Software Update, reset the printing, etc. None of that has worked (well, on occasion it works for a while). I am not using the drivers that came with the HP 8500; I'm told that you should use the drivers from Apple Software Update.
    I have discussed this with Apple Support. They say I need to purchase  Apple Protection Care for them to address this. This is weird, considering that this appears to be a software problem with software supplied by Apple!
    Any help would be appreciated.
    Thanks,

    Hi,A phone cable connection to a landline is required for faxing. Generally, a wireless connection only refer to the connection with a computer for printing and scanning, it do not refer to a fax setup. Regardless, the specific device does not support any wireless connectivity but only a wired network or a USB. Regards,Shlomi

  • Problems with enveloping in Flash

    I'm trying to create a shape tween, in which I use the envelop transform.
    Somehow, when I change the position of the points on the left side of the object, the object rotates during the shape tween; if I change the position of the points on the left side, everything goes the way it should be.
    I recorded the screen while displaying the problem, I hope it is clear this way:
    http://www.youtube.com/watch?v=7unBgC1MP10
    I hope someone can help me with what I did wrong.
    Thanks in advance!

    Don't know exactly what to tell you. I seldom use shape tweens because they seem to so often go awry.
    You might want to try and add a shape hint or two. Seems to work for me.
    Sorry I don't have more.

  • Problems with envelope-printing in Address Book: First and Last names

    New entries I make in Address Book are printing incorrectly, with Last name then First name. Most of my older entries print correctly as First name then Last name (though oddly I have a small batch of entries I imported ages ago which have always exhibited the same transposition problem).
    I have prefs set to display entries by Last name. Problem entries WILL print correctly if I change this to 'display by First name'. (older entries print correctly regardless of 'display by..' pref).
    I'm having the same problem if I create a new account, which made me suspect the app was corrupted, but not helped by deleting app and re-installing from Tiger DVD then running combo updater.

    Thank you for the suggestion.
    However, it doesn't make sense for the LIST display-order to swap the first-and-last names on an ENVELOPE. Secondly, most of my entries DO print correctly: it's only NEW entries that transpose the first and last names.

  • Problems with eprint for Officejet 6500 e709n

    Hi - I have a HP Officejet 6500 e709n printer.  when I go to setup there is not web services option under any of the menus.  I've printed a configuration page which shows that web services is enable but can't figure out how to print the web services information page.  we had this printer attached to both  my husband's and my ipads now it is nowhere to be found.  andy help is greatly appreciated.  thanks.

    Hi,
    Cloud Services as HP ePrint or Print Apps are only available for newer models, such fucctionality is not available as part of the HP Officejet 6500 (E709) Series.
    You may find any supported products for Web Services listed below:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02814760&lc=en&cc=us&dlc=en#N77
    You may print from iPad using the HP ePrint mobile app through your local network however:
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c01616126&lc=en&product=3795314&tmp...
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Problem with envelopes

    Hello all.
    I'm trying to create an envelope using the template but the address is too far right and a little too low. I've been trying to move it, etc. but have had no luck. Any suggestions as to how to place it in the correct location? Thanks in advance.

    This is a guess since you didn't mention which of the 17 envelope templates you are using.
    Adjust the height of the address using the Document Inspector, Document tab, Top Document Margin.
    Adjust the lateral position using the Layout Inspector, Layout tab, Left Layout Margin.
    Hope this does it for you.
    Jerry

  • HP Officejet 5610 all in one Communication Error Message on Mac with 10.10.2

    Hi,
    I got a new MAC computer running 10.10.2 Yosemite. I own the HP 5610 Officejet all in one printer. The new computer doesn't recognize the printer or scanner. I went to my applications folder and tried to uninstall the HP software but the printer doesn't show up there. I also downloaded the 3.0 software driver and tried to install it. 
    I can print from a document without a problem but I can't scan.
    Any ideas on how to solve this/
    Thank you.

    Hey @PRLady ,
    Welcome to the HP Support Forum.  I understand that you're having scan to Mac issues with your HP Officejet 5610 All-in-One Printer.  I would like to assist you with enabling scan to Mac OS X 10.10 Yosemite.  
    My colleague @X-23 has assisted another HP printer user with essentially the same issue in another Forum post.  Click here to access troubleshooting steps that may resolve your scanning issue. 
    As HP has not released a Full Feature driver available that's directly compatible with Mac OS X 10.10 Yosemite, my colleague has outlined the steps in which you may add your printer into the Mac.  (In this type of setup you would be using the built-in HP drivers that are available through Apple).
    Please respond to this post in regards to your troubleshooting result.  Best of luck with your setup!
    E-roq
    I work on behalf of HP.
    Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
    Click Kudos Thumbs Up on the right to say “Thanks” for helping!

  • How to scan documents with HP Officejet 5610 and iMac 21.5 ?

    Hello,
    Please can someone tell me how to scan documents with a HP Officejet 5610 all-in-one printer and an iMac 21.5 , OS X Yosemite version 10.10.1 ?
    Thanks a lot.

    Hi,
    Scanning can be done on Yosemite as listed in the following document:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c04467713&tmp_task=useCategory&cc=us&dlc=en&lc=e...
    A such will allow scanning as a PDF file as example.
    If by "Scanning a Document" you may refer to OCR scanning (e.g. scanning a text to a Word file which can be edited), a such is not supported by the provided solution and will require a 3rd party software which offer OCR capabilities. Vuescan re as example support a such:
    http://www.hamrick.com/vuescan/hp_officejet_5600.html
    Regards,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • HP Officejet 4500 keeps saying tricolor problem with cartridge

    problem with my HP officejet 4500 heeps saying refer to device documentation to troubleshoot print color cartrige tricolor. pleas help.

    @longfingers,
    Welcome to the Community!
    I saw your message about the error message you are receiving that states there is an issue with the tri-color cartridge. I want to suggest that you try the document below to hopefully get through the error. If you try all of the steps and the error continues, then your best bet would be contacting us directly to see about a replacement or trade in printer.
    HP Officejet 4500 (G510) Series and 4500 (K710) Series All-in-One Printers - 'Incorrect Print Cartri...
    Reach our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-contact-us.​html
    If you wish to say thanks for the reply, click the thumbs up icon below
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Scanner and fax problems with the Officejet 7410 AIO

    Hi
    I have Windows 7 SP1 Ultimate 64 bit and I installed the basic drivers for the network of the Officejet 7410 AIO printer and I checked that all its functions worked properly.
    Now, the functionality of the scanner and fax do not work more as in the "Devices and Printers" not appear more their relative icons. How come? How do I install them manually?
    Thanks
    Bye
    balubeto

    Hi balubeto,
    Welcome to the HP Forums!
    I see that you are having scanning, and faxing problems with your HP Officejet 7410 on Windows 7 SP1.
    I would recommend the following:
    Run the HP Print and Scan Doctor, to diagnose the issue.
    Uninstall the software. Uninstalling the Printer Software.
    Re-install the software using the HP Printer Install Wizard for Windows.
     Hope this helps, and have a great day!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Poor quality Photo printing with the HP Officejet 6600

    Is anyone having a problem with the HP Officejet 6600 having very poor quality photo prints?

    Hi HereInJersey,
    Welcome to the HP Support forums.  I understand that printed photos from your  Officejet 6600 don't have the quality that you expect.
    I have included the "Fixing Ink Streaks, Faded Prints, and Other Common Print Quality Problems" troubleshooting document.  It has detailed steps to take to improve the quality of your print jobs.
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

  • Unable to find appropriate driver for my mcbook air using a ricoh aficio mp36501SP network printer.  had similar problem with another ricoh copier/printer, but was able to resolve that problem entering ip address.  this one wants job code

    unable to find appropriate driver for my mcbook air using a ricoh aficio mp36501SP network printer.  had similar problem with another ricoh copier/printer, but was able to resolve that problem entering ip address.  this one wants job code.  i don't believe mac allows for input on job code or printer code for permission to print

    I'm having similar problems with an HP OfficeJet 6500. One suggestion that improved the situation, but did not totally solve the problem, was to select "OfficeJet Pro L7700" for its drivers.
    One other suggestion is to turn off the printer, then simultaneously hold down the "#" and "9" keys and turn the printer back on. This hot key seems to reset the printer to factory defaults, allowing you to set things up anew.
    Finally, kvetch to HP. Their networking software clearly has problems in its relationship to OSX, but nobody on either side seems motivated to bring in a good therapist.

  • Can't get networked HP Officejet 5610 to work with MacBook

    Apologies in advance if I'm covering old ground.
    I just upgraded my Deskjet 832C to an Officejet 5610 All-In-One. The printer is connected to a WinXP machine and works without a hitch on three Windows PC's using print sharing. However, I've tried everything and can't get it to work with my MacBook using a wireless connection. The old 832c worked with no problem. In fact, I don't recall ever doing any setup to get it to work; it was just detected on the network and worked without any intervention on my part when I got the MacBook. With the new printer, however, it just won't print. I can go to "add printer" on the Mac and add it with no problem; the computer sees the printer on the mshome network. It's automatically set up as a "generic" printer because I don't see this particular model listed under the HP printers. But when I print, nothing happens. I think it's getting to the printer because I can open up the printer dialogue on the Windows machine and it'll show it's printer something called a "down level document" or something to that effect. But it just hangs up there and never prints. I also can't print anything from any of the Windows PC's while it's hung up on this.
    Any suggestions on what I need to do. The much older 834c worked without me doing anything special, so I can believe a newer model won't work. Thanks in advance for any advice.

    Thanks for the suggestions, but nothing seems to work. I've tried the 900 series driver as suggested, I've set the printer up using both the "default brower" and "ip printer" options, I've gone into Windows and checked the "TCP/IP" box in addition to the USB ports ... nothing makes any difference in the behavior. The Mac seems to be communicating with the PC because in the Windows printer dialogue box, it shows that a "remote downlevel document" is printing, but it hangs there and nothing will happen. I have to restart the Windows PC to clear the print job and can't print from any of the Windows PC's until I clear it.
    Thanks again. I'll keep searching for an answer. Never thought changing to a newer, more up-to-date printer would be this much trouble.

Maybe you are looking for