Problems with quotations marks

Hi,
I got some problems with quotations marks in my queries.
I am trying to do something like this:
<cfset Variables.sqlAux = "select * from customer where
name='Rodrigo' ">
<cfquery>
#Variables.sqlAux#
</cfquery>
Coldfusion returns this error messagem:
Incorrect syntax near 'Rodrigo'.
Some one can help?

I should also expect this to work:
<cfquery>
#toString(Variables.sqlAux)#
</cfquery>

Similar Messages

  • Problem with quotation marks in Reports

    Hello,
    in Reports i have a text item, and i wrote a text „test” (this is copy/paste from a Word Document). At runtime i see ?text?
    Why those quotation marks does not appear correctly at runtime?
    It's about Reports Developer 2000. Please help if you can.
    Regards,

    my NLS_LANG, before editing in registry was AMERICAN_AMERICA.WE8ISO8859P1 (without that '5' at the end).
    it's WE8ISO8859P1 not WE8ISO8859P15. and i have the NLS_LANG, AMERICAN_AMERICA.WE8ISO8859P1. stil not displaying ok..
    this problem has nothing about the server, but the client, i think.
    the problem appears when i call a report from a form. when i run the report inside Report Builder, the quotation marks appears as „ ".
    Regards

  • Strange problem with quotation marks - help

    For some reason the quotation mark has been replaced by the @ symbol for all fonts?? Whenever I type ", the @ symbol is placed in the text field instead. It only happens in one particular document and I have done a save as and re-named the document and opened and closed it, but it still happens.
    Any suggestions would be appreciated.
    Paul

    Windows has a toggle function for input keyboards. I can't recall what key combo it was, since I turn it OFF asap on every single installation I work with :-) but it is something with Shift+Alt.
    Double click the language icon in the task bar to change the settings.
    It might happen in only one file because if Paul does something in that file, he's accidentaly using the keyboard toggle keys :-)
    Just for laughs: press the left shift key five times and see what happens. If you get a dialog, go through every option and turn its key activation combo off.

  • Problem with quotation marks.

    I've made an exercice 'fill in the blanks' in Captivate where children have to fill in a quotation mark. Captivate uses curley quotation marks, but when you make the exercice in a browser you only get straight quotation marks and the result is 'wrong'. How can I fix this?

    I doubt that you will be able to resolve this.  There are some punctuation characters that are not recommended for use in Captivate projects because they are also used in programming languages and can cause conflicts in the runtime project.

  • Write to file string sometimes with quotation marks

    Hi Labview community,
    I have a VI which creates a string array which I then wire to the "Write To Text File" VI.
    One of the elements in the string array is a control input.
    I have noticed that when the input is long, and I open the file in wordpad, then the string has quotation marks around it.
    But when the control string is short, it appears in wordpad without quotation marks.
    Additionally, a later element in the string array is also written with or without quotation marks depending on whether the control input string had quotation marks.
    Can anyone explain this behaviour?  How can I get more certainty in whether the strings are written with quotation marks or not?
    It created a problem for me when another VI parsed the file looking for the line with the string but could not find it when the quotation marks were present.
    Jamie
    Using Labview version 8.0

    Hi Jamie,
    which LabView version do you use?
    Could you attach an eample showing the problem? Normally 'Write to text file' just writes the string that is wired to it. It (normally) doesn't add quotation marks. The only option you can set is 'Convert EOL?' (input up to LV7.1, right-click in LV8+). The help window also didn't mention any quotation marks...
    Best regards,
    GerdW
    CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
    Kudos are welcome

  • French words with quotation mark can't be searched

    I'm using RH7 to create a project in French. When generating
    the WebHelp I enable the "TOC", "Index" and "Search" tabs.
    Everything looks fine until I use the Search Function. I type a
    word with quotation mark, such as "l'émetteur" or "d'actions",
    in the search box. It returns no result although I know for sure
    they appear in my project in many places.
    Please help!

    This is definitely a problem in RH7. Has anybody found a solution? Please?
    Another problem is that the index does not sort alphabetically. RH is putting these words at the end of the index, even though diacritics do not affect alphabetical order in French:
    âge
    èdition
    ètats
    Anybody?
    Eileen

  • FM 8 Problem with diacritical marks in index

    I have text in Latvian using Times new Roman Baltic fonts with items marked for inclusion in the index.
    When an index is generated, the index automatically is generated using Times New Roman fonts and the diacritics are wrong. Changing the font to Times New Roman Baltic does not correct this problem.
    I have specified the Group Titles sort order with letter groups, however, they do not sort properly.
    e.g. A;Â is specified in the sort order, but the index displays only the group title A and includes the â terms under it.
    I have set up the identical Index specification that I was using in Framemaker 7, but am unable to get correct results in FM8

    Sveiks Ansi,<br /><br />With FM 8, you can't use the code-page specific registry instances of<br />a WGL truetype font. You either have to use a specific code-page<br />encoded font, such as the Tilde Baltic versions, or re-map the<br />specific latvian code-page characters from their WinBaltic CP1257<br />settings to their unicode values.<br /><br />The remapping can be done relatively easily using a text editor or a<br />grep-like tool (e.g. Search & Replace, TextPipePro, WinGrep, etc.) on<br />a v.7 MIF version of the FM file (this is important, since FM8 gives<br />you a choice of the MIF versions that you can save as). Search for the<br />FM hex values and replace these with the required unicode value, e.g.<br />zcaron (ANSI 253 in the CP1257 codepage) is \xca in the FM hex coding<br />and needs to be \u017e in unicode. You can use Windows Charmap<br />function to get the 4-character unicode values (but ignore the<br />hex-value reported).<br /><br />You can also do this "re-mapping" using FM's find/change (again look<br />for the \x  hexcodes and replace with unicode \u values), but it's<br />tedious.<br /><br />You also need to change the font from the Times New Roman Baltic to<br />just Times New Roman.<br /><br />Note: for the MIF route, you also *must* change the initial<br /><MIFFILE...> statement to show as an 8.00 version for this to work<br />properly, otherwise if FM re-imports this as a v.7 MIF it will not<br />honour the unicode mappings.<br /><br />Once you've got everything converted to unicode values, then<br />specifying the group sort orders of the index should also work<br />properly.<br /><br />Yes, I know, it's a real PITA working with legacy codepage-specific<br />documents in FM8.<br /><br />- Arnis

  • Problem with inventory marker

    Hi,
    I have a problem with my inventory markers.
    When I do:  Material 1000251, Plant=0212, Record type = 1 (Only include material, plant, day, issues, and receipts)
    I get the totals of:  Issues = 0.  Receipts = 1  (This is correct.  On hand Qty = 1)
    When I do:  Material 1000251, Plant=0212, Record type = 1 (but I now include 0MAT_PLANT as well)
    I get the totals of:  Issues = 0.  Receipts = -4  (This is NOT correct.  On hand Qty = 1)
    Any ideas on how to correct this marker problem for 0MAT_PLANT?
    Thanks,
    Chris

    Hi Chris,
    Check the Marker Update scenarios in the below doc. This would give you some clue on your issue.
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328
    Regards,
    Suman

  • SCCM 2012 Update Group inconsistency Problem with Red marked Updates

    Hi everybody,
    we have a big Problem with our SCCM 2012 R2 CU3 Enviroment, regarding of Update Groups which got out of sync.
    we have a SCCM Site Infastructure with one CAS and 4 Primary Sites and on every Site is the SUP Role installed.
    I don't know when this failure occours but i think it was after the CU3 Installation. The Installation itself went smooth without any Errors or Warnings.
    The Problem is as following. We have some updates in Update Groups (all of them are Core XML Updates) which are out of sync and marked red as an invalid Update on 2 Primary Sites. On the CAS Site and the 2 other Primary SItes they are marked as green (downloaded
    yes and deployed yes)
    We have no Replication issues regarding the Replication Status (everything is synchronized to 100%) and the Replication Link Analyzer does also show no Problems at all.
    I now deleted the Deployments and the SW Update Group waited until the replication was fine and created a new one and downloaded these patches on one of the Primary Sites which had shown this Failure.
    The Result was not good. It looks like before. On the CAS and 2 Primary Sites the Deplyment is shown as downloaded but on the other 2 Sites the Status is again Downloaded=no.
    Does anybody have any idea what to do now ? I checked objmgr.log and rcmctr. log but found nothing what shows me the way in the right direction.
    Thx for your time, and it would be fine if anybody can share knowledge about this failure and how to fix it.
    All other Ideas are also welcome.
    Thx a lot in advance and have a nice bug free day :-)
    Bastian

    Hi,
    Please try to manually synchronize software updates from the CAS and monitor the WSUSCtrl.log, WCM.log and wsyncmgr.log on the CAS and Primary sites.
    Best Regards,
    Joyce
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Batch Capture Problem with 5D mark II

    At the end of an event we normally copy all cards to the HDD, each card in a separate folder. We then point FCP at the card folders and use log & transfer to ingest the footage and transcode to ProRes 422.
    Once all the footage is ingested we save the project and copy it from the Mac Pro to the iMac so that a second editor can work on it at the same time. Because the iMac doesn't have a RAID we set all the footage to 'offline' and use batch capture to recapture it all in ProRes Proxy.
    So far so good.... that is with all the Panasonic HMC footage.... BUT we recently started shooting on the Canon 5D2 and 7D as well and this simply isn't working.
    For some reason FCP recaptures all the Panasonic footage but refused to re-capture the Canon footage. I can see all the files in the L&T window but it never seems to equate the footage with the files I am trying to recapture.
    HELP! What could be causing this? It's only a problem with the Canon footage.
    Both MacPro and iMac are running identical versions of FCP and identical (latest) versions of the Canon L&T plug in ..... and YES we copied the entire CF card to a folder - just like we do with the Panasonic HMC stuff.

    Hi Andy, compressor is current chugging away, so we'll get going for the edit I am sure. Only 600 more clips to go
    I've tried everything I can think of in terms of recapturing. Even on the original Mac Pro that the footage came in to, if I copy the entire project folder (including the 'cards' folder) from one RAID to another it fails to recapture in the original project using the original codec (ProRes 422), but if I point it back to the original cards folder it works fine. It seems to be 'moving/copying' the cards that is causing the problems.
    I've checked the dates and sizes on the copied files and they are all the same, and since recapturing to the original project at the original settings doesn't work once moved I am completely stumped....!

  • Problem with Beat Marker

    I am using Premier Elements 9 and in the middle of editing clips in the Timeline the beat marker stopped moving. How do I fix it?

    David,
    That is great news!
    I have been working with PrE 11 for some time now, on an older laptop. It is still running XP-Pro SP3, so is 32-bit, with that version of PrE 11. I have also run into the "end-of-life" for my nVidia video driver, unless I change the OS. Now, and with that said, I have experienced several lags with the CTI, and also several instances where the Spacebar will not start the Timeline's playback, even when I know that it has focus.
    Because of my older hardware, and one known issue with my video driver, I hesitate to complain about the CTI performance (and a few other issues), as it might not be related to PrE 11, but just to the hardware.
    Glad that rebooting got you up and editing. Good luck,
    Hunt
    PS - I have my new super laptop, but have not had time to set it up, install the 64-bit PrE 11 on it, and test with a new, killer nVidia card. When I can block off a couple of days, I will do so, and then report whether I encounter such "glitches" with the new hardware.

  • Problems with exclamation marks ??

    Hi,
    when i run the following select statement ...
    SELECT clubid,clubname FROM clubs WHERE CONTAINS (shortdesc,'!',1)>0
    i get the ORA-error ...
    message=ORA-29902: error in executing ODCIIndexStart() routine
    ORA-20000: interMedia Text error:
    DRG-50901: text query parser syntax error on line 1, column 2
    I think the reason is the exclamation mark in the search string ?! Did you have any ideas ?
    THX petra

    Please post your Oracle Text questions in the Oracle Text discussion forum (where you will find the Oracle Text experts).

  • Problem with quotation /salesorder

    hi,
    in one sales area we have material like m1,m2,m3...etc and customer like c1,c2,c3......etc
    i could't create quotation/order for  some of them combination .i am getting empty or null  as order number.
    can u pls tell me the reason
    regards
    Guru

    What is the error msg no. ?
    Thanks,
    Ashish

  • How do I replace quotation marks with double angle quotation marks, still keeping the word in the mi

    Hi,
    Does anyone know how to replace quotation marks with double angle quotation marks, still keeping the word in the middle?
    For example: I search for a word with quotation marks by typing in: (")(\w+)(") in the "find what" field. What should I type in the "change to" field?
    I'd be very grateful for answers!

    It's much simpler: find " and replace with " (make sure that 'Use typographer's quotes' is enabled in the preferences).
    Peter

  • 5D mark III lens correction problem with dark shots

    Just found a new irritating problem with 5D mark III and Lightroom 4 (currently on 4.2). I shot quite a few shots in the dark over the weekend using high ISO (6400-16000), with EF 24-70 f/2.8L. If I enable the lens profile correction on the dark shots, the corners of the images all develop incredibly strong purple haze that renders the image unusable. Not enabling the correction allows me to use the images just fine. Also images that were shot with similar settings but were shot inside, with more light, don't have the purple fringing issue. Makes me wonder if this is some incompatibility between Canon's high iso noise reduction system and Lightroom's RAW processing when it does lens corrections.
    Anyone else seen this?

    Sulka Haro wrote:
    Replicated the shot under a heavy blanket -> yes, the exposure looks the same. Whatever is causing the corner to be noisier than rest of the exposure doesn't seem to be caused by light.
    At that very high of ISO you are actually seeing small differences in the sensor chip temperature due to heat from the electronics in the camera. The small amount of increased noise you're seeing in the corner at ISO 25600 is insignificant.
    Sulka Haro wrote:
    Interestingly enabling long exposure compensation doesn't seem to do very much to really improve the shots at these sensitivities. When enabled, the exaggerated corner noise does disappear, but also it looks like some areas in the middle of the exposure become more noisy with non-uniform noise blotches appearing instead of fairly uniform slightly higher noise pattern.
    I haven't needed to use Long Exposure Noise Reduction with my 5D MKII, so have no firsthand experience. My guess is that at very high ISO settings (above 6400) a lot of what your are seeing is random noise or "shot noise," which changes from frame to frame. This causes the dark frame subtraction to "fail" in the way you are seeing. Just a guess.
    There is an excellent 5D MKIII review that compares noise reduction with several other high-end camera models. The reviewer also states,
    "The 5D Mark III's ISO 51200 and 102400 remain a complete mess even with strong noise reduction applied - You have to be desperate to use these settings. ISO 12800 and 25600 remain very marginal for my uses. I always shoot in the lowest standard ISO setting that will allow me to get my desired shot, but begin to cringe when settings above ISO 3200 must be employed. Your standards and applications may be different."

Maybe you are looking for