Problems with Remote key

Hi everybody,
I have problem with key mapping. My table has only one field Name (Text[50]). This field is a display field.
Value Key Mapping of the table is set to Yes.
Problem is that I cannot see the Remote key field among destination fields in Import Manager.
Can anybody help me? Is there something I should set?
Thanks
Tomas

Hello:
This usually happens if you haven't set up any Client Systems. Please go to MDM console -> your Repository -> Admin -> Client Systems. There set your systems as Inbound/Outbound.
Regards
Alejandro

Similar Messages

  • Problems with Remote App on iOS 4?

    I have a new iPhone 4 and tried to use the Remote App in Connection with Apple TV. While I'am able to pair the remote app with Apple TV, I cannot use it properly. It works for a while, then it get's disconnected with a message that maybe a Firewall might be activated in the Router.
    I have no problems with Remote App connected to my iTunes Library. I also tried it with a iPod Touch which is still on iOS 3.1.3, no problems to connect to the Apple TV from there as well.
    Are there any known problems with iOS 4 and Apple TV?

    Chenks wrote:
    maybe for you, but isn't for me.
    i have the remote app on my iphone4 and it's connected to 2 appletv's.
    i don't experience any dropping of connection etc.
    May I ask what wifi hardware you use? It might be an wifi issue, but one which is only related with the "Bonjour" protocol which seems to be used for the Remote App. I found this thread which is older (iOS 3) but describing exactly the same problems:
    http://discussions.apple.com/thread.jspa?threadID=2048555&start=0&tstart=0
    bear in mind that the iphone4 is now "n" wifi compatible (2.4Ghz), so could it be that the "n" part of your network is poor and thus why you only see the problem on the iphone4 ?
    At least it is not poor when using it from other devices or moving a lot of data in other Apps. It is all Apple Hardware (nothing older than 2 years), and maybe that's the problem. I never had network hardware which made so much trouble, as Apples Airport series. I wouldn't wonder if it is an incompatibility between a new wifi chip in the iPhone 4 and a older Revision of an Airport device. But I don't know how to check - is there a system.log on the iPhone which I can access somehow?

  • Mapping problem with compressed key update record

    Hi, could you please advise?
    I'm getting the following problem:
    About a week ago replicat abened with "Error in mapping" error. I found in discard file some record looking like:
    filed1 = NULL
    field2 =
    field3 =
    field4 =
    field5 =
    datefield = -04-09 00:00:00
    field6 =
    field8 =
    field9 = NULL
    field10 =
    Where filed9 = @GETENV("GGHEADER", "COMMITTIMESTAM"), field10 = = @GETENV("GGHEADER", "COMMITTIMESTAM"), others are table fields mapped by USEDEFAULTS
    So I got Mapping problem with compressed key update record at 2012-06-01 15:44
    I guess I need to mention that extract failed in 5 minuts before it with: VAM function VAMRead returned unexpected result: error 600 - VAM Client Report <[CFileInfo::Read] Timeout expired after 10 retries with 1000 ms delay, waiting to read transaction log or backup files. To increase the number of retries, use SETENV (GGS_CacheRetryCount = n) in Extract parameter file. To control retry delay time, use SETENV (GGS_CacheRetryDelay = n). handle: 0000000000000398 ReadFile GetLastError:997 Wait GetLastError:997>.
    I don't know if it has ther same source as data corruption, could you tell me if it is?
    Well, I created new extract, starting 2012-06-01 15:30 to check if there was something with extract at the time, but got the same error.
    If I run extract beging at 15:52 it starts and works.
    But well, I got another one today. Data didn't look that bad, but yet one column came with null value:( And I'm using it as a key column, so I got Mapping problem with compressed key update record again:(
    I'm replicating from SQL Server 2008 to Oracle 11g.
    I'm actually using NOCOMPRESSUPDATES in Extract.
    CDC is enabled for all tables replicated. The only thing is that it is enabled not by ADD TRANDATA command, but by SQL Server sys.sp_cdc_enable_table, does it matter?
    Could you please advise why does it happen?

    Well, the problem begins somewhere in extract or before extract, may be in transaction log, I don't know:(
    Here are extract parameters:
    EXTRACT ETCHECK
    TRANLOGOPTIONS MANAGESECONDARYTRUNCATIONPOINT
    SOURCEDB TEST, USERID **, PASSWORD *****
    exttrail ./dirdat/ec
    NOCOMPRESSUPDATES
    NOCOMPRESSDELETES
    TABLE tst.table1, COLS (field1, field2, field3, field4, field5, field6, field7, field8 );
    TABLE tst.table2, COLS (field1, field2, field3, field4 );
    Data pump:
    EXTRACT DTCHECK
    SOURCEDB TEST, USERID **, PASSWORD *****
    RMTHOST ***, MGRPORT 7809
    RMTTRAIL ./dirdat/dc
    TABLE tst.table1;
    TABLE tst.table2;
    Replicat:
    REPLICAT rtcheck
    USERID tst, PASSWORD ***
    DISCARDFILE ./dirrpt/rtcheck.txt, PURGE
    SOURCEDEFS ./dirdef/sourcei.def
    HANDLECOLLISIONS
    UPDATEDELETES
    MAP tst.table1, t.table1, COLMAP (USEDEFAULTS , filed9 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed10= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (field3);
    MAP dbo.TPROCPERIODCONFIRMSTAV, TARGET R_019_000001.TPROCPERIODCONFIRMSTAV, COLMAP (USEDEFAULTS , field5 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed6= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (filed1, field2, field3);
    Rpt file for replicat:
    Oracle GoldenGate Delivery for Oracle
    Version 11.1.1.1 OGGCORE_11.1.1_PLATFORMS_110421.2040
    Windows x64 (optimized), Oracle 11g on Apr 22 2011 00:34:07
    Copyright (C) 1995, 2011, Oracle and/or its affiliates. All rights reserved.
    Starting at 2012-06-05 12:49:38
    Operating System Version:
    Microsoft Windows Server 2008 R2 , on x64
    Version 6.1 (Build 7601: Service Pack 1)
    Process id: 2264
    Description:
    ** Running with the following parameters **
    REPLICAT rtcheck
    USERID tst, PASSWORD ***
    DISCARDFILE ./dirrpt/rtcheck.txt, PURGE
    SOURCEDEFS ./dirdef/sourcei.def
    HANDLECOLLISIONS
    UPDATEDELETES
    MAP tst.table1, t.table1, COLMAP (USEDEFAULTS , filed9 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed10= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (field3);
    MAP dbo.TPROCPERIODCONFIRMSTAV, TARGET R_019_000001.TPROCPERIODCONFIRMSTAV, COLMAP (USEDEFAULTS , field5 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed6= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (filed1, field2, field3);
    CACHEMGR virtual memory values (may have been adjusted)
    CACHEBUFFERSIZE: 64K
    CACHESIZE: 512M
    CACHEBUFFERSIZE (soft max): 4M
    CACHEPAGEOUTSIZE (normal): 4M
    PROCESS VM AVAIL FROM OS (min): 1G
    CACHESIZEMAX (strict force to disk): 881M
    Database Version:
    Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
    PL/SQL Release 11.2.0.1.0 - Production
    CORE     11.2.0.1.0     Production
    TNS for 64-bit Windows: Version 11.2.0.1.0 - Production
    NLSRTL Version 11.2.0.1.0 - Production
    Database Language and Character Set:
    NLS_LANG = "AMERICAN_AMERICA.CL8MSWIN1251"
    NLS_LANGUAGE = "AMERICAN"
    NLS_TERRITORY = "AMERICA"
    NLS_CHARACTERSET = "CL8MSWIN1251"
    For further information on character set settings, please refer to user manual.
    ** Run Time Messages **
    Opened trail file ./dirdat/dc000000 at 2012-06-05 12:49:39
    2012-06-05 12:58:14 INFO OGG-01020 Processed extract process RESTART_ABEND record at seq 0, rba 925 (aborted 0 records).
    MAP resolved (entry tst.table1):
    MAP tst.table1, t.table1, COLMAP (USEDEFAULTS , filed9 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed10= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (field3);
    2012-06-05 12:58:14 WARNING OGG-00869 No unique key is defined for table table1. All viable columns will be used to represent the key, but may not guarantee uniqueness. KEYCOLS may be used to define the key.
    Using the following default columns with matching names:
    field1=field1, field2=field2, field3=field3, field4=field4, field5=field5, field6=field6, field7=field7, field8=field8
    Using the following key columns for target table R_019_000001.TCALCULATE: field3.
    2012-06-05 12:58:14 WARNING OGG-01431 Aborted grouped transaction on 'tst.table1', Mapping error.
    2012-06-05 12:58:14 WARNING OGG-01003 Repositioning to rba 987 in seqno 0.
    2012-06-05 12:58:14 WARNING OGG-01151 Error mapping from tst.table1 to tst.table1.
    2012-06-05 12:58:14 WARNING OGG-01003 Repositioning to rba 987 in seqno 0.
    Source Context :
    SourceModule : [er.main]
    SourceID : [er/rep.c]
    SourceFunction : [take_rep_err_action]
    SourceLine : [16064]
    ThreadBacktrace : [8] elements
    : [C:\App\OGG\replicat.exe(ERCALLBACK+0x143034) [0x00000001402192B4]]
    : [C:\App\OGG\replicat.exe(ERCALLBACK+0x11dd44) [0x00000001401F3FC4]]
    : [C:\App\OGG\replicat.exe(<RCALLBACK+0x11dd44) [0x000000014009F102]]
    : [C:\App\OGG\replicat.exe(<RCALLBACK+0x11dd44) [0x00000001400B29CC]]
    : [C:\App\OGG\replicat.exe(<RCALLBACK+0x11dd44) [0x00000001400B8887]]
    : [C:\App\OGG\replicat.exe(releaseCProcessManagerInstance+0x25250) [0x000000014028F200]]
    : [C:\Windows\system32\kernel32.dll(BaseThreadInitThunk+0xd) [0x000000007720652D]]
    : [C:\Windows\SYSTEM32\ntdll.dll(RtlUserThreadStart+0x21) [0x000000007733C521]]
    2012-06-05 12:58:14 ERROR OGG-01296 Error mapping from tst.table1 to tst.table1.
    * ** Run Time Statistics ** *
    Last record for the last committed transaction is the following:
    Trail name : ./dirdat/dc000000
    Hdr-Ind : E (x45) Partition : . (x04)
    UndoFlag : . (x00) BeforeAfter: A (x41)
    RecLength : 249 (x00f9) IO Time : 2012-06-01 15:48:56.285333
    IOType : 115 (x73) OrigNode : 255 (xff)
    TransInd : . (x03) FormatType : R (x52)
    SyskeyLen : 0 (x00) Incomplete : . (x00)
    AuditRBA : 44 AuditPos : 71176199289771
    Continued : N (x00) RecCount : 1 (x01)
    2012-06-01 15:48:56.285333 GGSKeyFieldComp Len 249 RBA 987
    Name: DBO.TCALCULATE
    Reading ./dirdat/dc000000, current RBA 987, 0 records
    Report at 2012-06-05 12:58:14 (activity since 2012-06-05 12:58:14)
    From Table tst.table1 to tst.table1:
    # inserts: 0
    # updates: 0
    # deletes: 0
    # discards: 1
    Last log location read:
    FILE: ./dirdat/dc000000
    SEQNO: 0
    RBA: 987
    TIMESTAMP: 2012-06-01 15:48:56.285333
    EOF: NO
    READERR: 0
    2012-06-05 12:58:14 ERROR OGG-01668 PROCESS ABENDING.
    Discard file:
    Oracle GoldenGate Delivery for Oracle process started, group RTCHECK discard file opened: 2012-06-05 12:49:39
    Key column filed3 (0) is missing from update on table tst.table1
    Missing 1 key columns in update for table tst.table1.
    Current time: 2012-06-05 12:58:14
    Discarded record from action ABEND on error 0
    Aborting transaction on ./dirdat/dc beginning at seqno 0 rba 987
    error at seqno 0 rba 987
    Problem replicating tst.table1 to tst.table1
    Mapping problem with compressed key update record (target format)...
    filed1 = NULL
    field2 =
    field3 =
    field4 =
    field5 =
    datefield = -04-09 00:00:00
    field6 =
    field8 =
    field9 = NULL
    field10 =
    Process Abending : 2012-06-05 12:58:14

  • Mapping problem with compressed key update record (target format)...

    Hi Guys,
    Getting below error while replication from Source to target. Source table is having NOT NULL Column, but on target replicat process giving error about some NULL value ??
    How to overcome this issue, any idea...
    2011-08-04 10:35:04 INFO OGG-00995 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: REPLICAT RMASTRK starting.
    2011-08-04 10:35:05 INFO OGG-00996 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: REPLICAT RMASTRK started.
    2011-08-04 10:35:06 WARNING OGG-00869 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: OCI Error ORA-01407: cannot update ("INFRA"."CUST"."CODE") to NULL (status = 1407), SQL <UPDATE "INFRA"."CUST" SET "ORD_ID" = :a2,"DP_ID" = :a3,"EXCHNG_CODE" = :a4,"ORD_QTY" = :a5,"ORD_PRICE" = :a6,"CODE" = :a7,"MKRT_CODE" = :a8,"CHANN>.
    2011-08-04 10:35:06 WARNING OGG-01004 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: Aborted grouped transaction on 'INFRA.CUST', Database error 1407 (ORA-01407: cannot update ("INFRA"."CUST"."SCRP_CODE") to NULL).
    2011-08-04 10:35:06 WARNING OGG-01003 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: Repositioning to rba 44132192 in seqno 68708.
    2011-08-04 10:35:06 *WARNING OGG-01154 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: SQL error 1407 mapping INFRA.CUST to INFRA.CUST OCI Error ORA-01407:* *cannot update ("INFRA"."CUST"."SCRP_CODE") to NULL (status = 1407), SQL <UPDATE "INFRA"."CUST" SET "ORD_ID" = :a2,"DP_ID" = :a3,"EXCHNG_CODE"=:a4,"ORD_QTY"*
    *= :a5,"ORD_PRICE" = :a6,"SCRP_CODE" = :a7,"MKRT_CODE" = :a8,"CHANN>.*
    2011-08-04 10:35:06 WARNING OGG-01003 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: Repositioning to rba 44132192 in seqno 68708.
    2011-08-04 10:35:06 ERROR OGG-01296 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: Error mapping from INFRA.CUST to INFRA.CUST.
    2011-08-04 10:35:06 ERROR OGG-01668 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: PROCESS ABENDING.
    Oracle GoldenGate Delivery for Oracle process started, group RMASTRK discard file opened: 2011-08-04 10:35:05
    Current time: 2011-08-04 10:35:06
    Discarded record from action ABEND on error 1407
    OCI Error ORA-01407: cannot update ("INFRA"."CUST"."SCRP_CODE") to NULL
    (status = 1407), SQL <UPDATE "INFRA"."CUST" SET "ORD_ID" = :a2,"MKRT_CODE" = :a8,"CHANN>
    Aborting transaction on ./dirdat/pm beginning at seqno 68708 rba 44132192
    error at seqno 68708 rba 44132192
    Problem replicating INFRA.CUST to INFRA.CUST
    *Mapping problem with compressed key update record (target format)...*
    ORD_QTY = 500
    ORD_PRICE = 37430
    SCRP_CODE =
    MKRT_CODE = N
    Oracle GoldenGate Delivery for Oracle process started, group RMASTRK discard file opened: 2011-08-
    04 10:35:05
    Current time: 2011-08-04 10:35:06
    Discarded record from action ABEND on error 1407
    OCI Error ORA-01407: cannot update ("INFRA"."CUST"."SCRP_CODE") to NULL
    (status = 1407), SQL <UPDATE "INFRA"."CUST" SET "ORD_ID" = :a2,"MKRT_CODE" = :a8,"CHANN>
    Aborting transaction on ./dirdat/pm beginning at seqno 68708 rba 44132192
    error at seqno 68708 rba 44132192
    Problem replicating INFRA.CUST to INFRA.CUST
    Mapping problem with compressed key update record (target format)...
    ORD_QTY = 500
    ORD_PRICE = 37430
    SCRP_CODE =
    MKRT_CODE = N
    Any inputs / help would be appreciated.
    Regards,
    Manish

    The SCRP_CODE column has a NOT NULL constraint. The ORA-01407 error is telling you that you cannot update or set a value for this column to null because of the constraint. This has absolutely nothing to do with an index. You can use a marker/sentinel value in lieu of using NULL. For a numeric field, where everything is positive, a negative value (-1) can be decoded as meaning null. For a character field, a code such as NA can represent NULL.
    This also has nothing to do (directly) with GoldenGate failing because of this error. The underlying SQL statement will fail everywhere, regardless of the tool or application. It is not a case of failing only in GoldenGate.

  • Having problem with dead key in Leopard

    Hello. I'm having problem with dead key in Leopard.
    In Tiger it was working, but in Leopard dead key "'" doesn't work.
    In Tiger I could use OPTION key as well to get Latvian special characters (both worked - OPTION Key and dead-key), but in LEOPARD OPTION key is the only possibility to get these characters.
    How can I get dead key "'" working?
    I'm using Latvian language with Latvian keyboard layout.
    Here are images how it looked in Tiger:
    1) Before dead key is pressed:
    http://amerix.no-ip.org/tmp/1.tiff
    2) After dead key is pressed:
    http://amerix.no-ip.org/tmp/2.tiff

    ok, i got answer
    so - first problem was that ukelele didn't work in leopard (it wasn't possible to start new layout), but it was possible to edit Tom Gewecke posted layout.
    There it is possible to change every thing (dead-key as well).
    So I edited it and now i have layout where dead-key works -
    http://amerix.no-ip.org/tmp/LatvianT.keylayout
    Just do what Tom Gewecke said with this layout. It should work!

  • Problems with fuction keys for brightness

    i have laptop hp 15 r006tx Product number: G8D30PA#ACJ 
    i have problems with functions keys for brightness , actually it does't works i can't actually adjust brightness, please help me.....................

    OK...
    I was right.  You have no graphics driver installed for the Intel HD graphics adapter.
    I am very surprised you were able to install the nVidia driver because usually you get an error that states you need to install the Intel graphics driver first.
    Once you install this driver, the Microsoft Basic Display adapter should be replaced by an Intel HD graphics adapter and you should be able to adjust the screen brightness.
    Make sure you have installed this Intel chipset driver first and reboot.  If you have done this already, you can skip this step.
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-130504-1&cc=us&dlc=en&lc=en...
    Next, install the Intel HD graphics driver and reboot.  This driver is for W8.1.  If you installed W8, you need a different graphics driver.
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-130257-1&cc=in&dlc=en&lc=en...

  • Problem with a key figure restriction

    Hi,
    I have a problem with one key figure in report: in infocube, this key figure is aggrigated for all the profit centers (summation). In infocube, there is a value '150' for each profit centers (100 pieces) and in the report it is counting 150*100=15000. However, it shouldn't count the sum of all entries in the infocube but show only one value in the report which would be '150'.
    I think this should be possible to do but I just don't know how. Hope somebody is able to help me. Thanks in advance.

    Hi,
    If the values are same for all profit center then change the Profit center infoobject property in the query design to show the maximum values for the 'calculation result as' parameter
    Regards,
    Vishwa,
    Edited by: Vishwanath H.E on Sep 3, 2008 9:19 AM

  • I'M HAVING PROBLEM WITH FUNCTION KEY, I'M HAVING PROBLEM WITH FUNCTION KEY

    Hello everybody
    Recently i'm having problem with function key of iphone4, now its working assistive touch key board , between these days i had restored and update then it work for next 12 hour after that it again stoped..
    pls help me from this isssue,
    thanking you.

    There are no function keys on the iPhone.
    Please clearly state the issue that is occurring.

  • Problem with Internet Key Onda Mt835Up: It doesn't work with mac os 10.6.6

    Hi I have a problem with internet key Onda MT835UP. It doesn't work, because my imac is more new than internet key.
    Can you help me? Can you send me the upgrade for this internet key?
    Thanks

    I have called Onda, there isn't the driver for Mac OS X 10.6.7 and they don't know if it'll be released.
    So if you have a Mac it's better to not buy Onda internet key,
    instead it's better to choose other brands that update the drivers of their products.

  • Problems with Registration Key, VB 2008 Express Edition

    VB 2008 Express Edition. Installed on a pc using Windows 8. Problem with registration key.
    I was given an executable program by a colleague that had already been used and I am currently making changes to the program to fit the specifics of my project. Thirty days after I started analyzing/manipulating the code, when I tried to open the program
    a pop-up came up that stated that I needed a registration key. When I click on the link on the pop-up to try to obtain a registration key, the link takes me to a page that states "the page doesn't exist" (http://www.microsoft.com/404.htm).
    That said, instead of trying to obtain a registration key I then downloaded a new version of VB 2008 Express Edition from Microsoft DreamSpark. I successfully downloaded the program. The website stated that if I ever needed a registration key, I could obtain
    it from within the program. However, even still, when I try to open up VB, the pop-up still comes up that states that I need a registration key.
    Does anyone have any suggestions or quick fixes? Thanks

    I'm not sure that registration keys are available any more for the 2008 version. There have been three versions since then (2010, 2012 and 2013) and  a fourth (2015) is currently being previewed.
    Is there any reason why you can use the current version? Visual Studio 2013 Community Edition is free for individuals and small companies.

  • Java API, problem with secondary keys using multi key creator

    Hi,
    I'm developing an application that inserts a few 100k or so records into a Queue DB, then access them using one of four Hash SecondaryDatabases. Three of these secondary dbs use a SecondaryMultiKeyCreator to generate the keys, and one uses a SecondaryKeyCreator. As a test, I'm trying to iterate through each secondary key. When trying to iterate through the keys of any of the secondary databases that use a SecondaryMultiKeyCreator, I have problems. I'm attempting to iterate through the keys by:
    1: creating a StoredMap of the SecondaryDatabase
    2: getting a StoredKeySet from said map
    3: getting a StoredIterator on said StoredKeySet
    4: iterate
    The first call to StoredIterator.next() fails at my key binding (TupleBinding) because it is only receiving 2 bytes of data for the key, when it should be getting more, so an Exception is thrown. I suspected a problem with my SecondaryMultiKeyCreator, so I added some debug code to check the size of the DatabaseEntries it creates immediately before adding them to the results key Set. It checks out right. I also checked my key binding like so:
    1: use binding to convert the key object to a DatabaseEntry
    2: use binding to convert the created DatabaseEntry back to a key object
    3: check to see if the old object contains the same data as the new one
    Everything checked out ok.
    What it boils down to is this: my key creator is adding DatabaseEntries of the correct size to the results set, but when the keys are being read back later on, my key binding is only receiving 2 bytes of data. For the one SecondaryDatabase that doesn't use a SecondaryMultiKeyCreator, but just a SecondaryKeyCreator, there are no issues and I am able to iterate through its secondary keys as expected.
    EDIT: New discovery: if I only add ONE DatabaseEntry to the results set in my SecondaryMultiKeyCreator, I am able to iterate through the keys as I would like to.
    Any ideas or suggestions?
    Thank you for your attention,
    -Justin
    Message was edited by:
    Steamroller

    Hi Justin,
    Sorry about the delayed response here. I have created a patch that resolves the problem.
    If you apply the patch to your 4.6.21 source tree, and then rebuild Berkeley DB, the improper behavior should be resolved.
    Regards,
    Alex
    diff -rc db/db_am.c db/db_am.c
    *** db/db_am.c     Thu Jun 14 04:21:30 2007
    --- db/db_am.c     Fri Jun 13 11:20:28 2008
    *** 331,338 ****
           F_SET(dbc, DBC_TRANSIENT);
    !      switch (flags) {
    !      case DB_APPEND:
                 * If there is an append callback, the value stored in
                 * data->data may be replaced and then freed.  To avoid
    --- 331,337 ----
           F_SET(dbc, DBC_TRANSIENT);
    !       if (flags == DB_APPEND && LIST_FIRST(&dbp->s_secondaries) == NULL) {
                 * If there is an append callback, the value stored in
                 * data->data may be replaced and then freed.  To avoid
    *** 367,388 ****
    -            * Secondary indices:  since we've returned zero from an append
    -            * function, we've just put a record, and done so outside
    -            * __dbc_put.  We know we're not a secondary-- the interface
    -            * prevents puts on them--but we may be a primary.  If so,
    -            * update our secondary indices appropriately.
    -            * If the application is managing this key's data, we need a
    -            * copy of it here.  It will be freed in __db_put_pp.
    -           DB_ASSERT(dbenv, !F_ISSET(dbp, DB_AM_SECONDARY));
    -           if (LIST_FIRST(&dbp->s_secondaries) != NULL &&
    -               (ret = __dbt_usercopy(dbenv, key)) == 0)
    -                ret = __db_append_primary(dbc, key, &tdata);
                 * The append callback, if one exists, may have allocated
                 * a new tdata.data buffer.  If so, free it.
    --- 366,371 ----
    *** 390,401 ****
                /* No need for a cursor put;  we're done. */
                goto done;
    !      default:
    !           /* Fall through to normal cursor put. */
    !           break;
    !      if (ret == 0)
                ret = __dbc_put(dbc,
                    key, data, flags == 0 ? DB_KEYLAST : flags);
    --- 373,379 ----
                /* No need for a cursor put;  we're done. */
                goto done;
    !      } else
                ret = __dbc_put(dbc,
                    key, data, flags == 0 ? DB_KEYLAST : flags);
    diff -rc db/db_cam.c db/db_cam.c
    *** db/db_cam.c     Tue Jun  5 21:46:24 2007
    --- db/db_cam.c     Thu Jun 12 16:41:29 2008
    *** 899,905 ****
           DB_ENV *dbenv;
           DB dbp, sdbp;
           DBC dbc_n, oldopd, opd, sdbc, *pdbc;
    !      DBT olddata, oldpkey, newdata, pkey, temppkey, tempskey;
           DBT all_skeys, skeyp, *tskeyp;
           db_pgno_t pgno;
           int cmp, have_oldrec, ispartial, nodel, re_pad, ret, s_count, t_ret;
    --- 899,905 ----
           DB_ENV *dbenv;
           DB dbp, sdbp;
           DBC dbc_n, oldopd, opd, sdbc, *pdbc;
    !      DBT olddata, oldpkey, newdata, pkey, temppkey, tempskey, tdata;
           DBT all_skeys, skeyp, *tskeyp;
           db_pgno_t pgno;
           int cmp, have_oldrec, ispartial, nodel, re_pad, ret, s_count, t_ret;
    *** 1019,1026 ****
            * should have been caught by the checking routine, but
            * add a sprinkling of paranoia.
    !      DB_ASSERT(dbenv, flags == DB_CURRENT || flags == DB_KEYFIRST ||
    !            flags == DB_KEYLAST || flags == DB_NOOVERWRITE);
            * We'll want to use DB_RMW in a few places, but it's only legal
    --- 1019,1027 ----
            * should have been caught by the checking routine, but
            * add a sprinkling of paranoia.
    !       DB_ASSERT(dbenv, flags == DB_APPEND || flags == DB_CURRENT ||
    !             flags == DB_KEYFIRST || flags == DB_KEYLAST ||
    !             flags == DB_NOOVERWRITE);
            * We'll want to use DB_RMW in a few places, but it's only legal
    *** 1048,1053 ****
    --- 1049,1107 ----
                     goto err;
                have_oldrec = 1; /* We've looked for the old record. */
    +      } else if (flags == DB_APPEND) {
    +           /*
    +            * With DB_APPEND, we need to do the insert to populate the
    +            * key value. So we swap the 'normal' order of updating
    +            * secondary / verifying foreign databases and inserting.
    +            *
    +            * If there is an append callback, the value stored in
    +            * data->data may be replaced and then freed.  To avoid
    +            * passing a freed pointer back to the user, just operate
    +            * on a copy of the data DBT.
    +            */
    +           tdata = *data;
    +           /*
    +            * If this cursor is going to be closed immediately, we don't
    +            * need to take precautions to clean it up on error.
    +            */
    +           if (F_ISSET(dbc_arg, DBC_TRANSIENT))
    +                dbc_n = dbc_arg;
    +           else if ((ret = __dbc_idup(dbc_arg, &dbc_n, 0)) != 0)
    +                goto err;
    +
    +           pgno = PGNO_INVALID;
    +
    +           /*
    +            * Append isn't a normal put operation;  call the appropriate
    +            * access method's append function.
    +            */
    +           switch (dbp->type) {
    +           case DB_QUEUE:
    +                if ((ret = __qam_append(dbc_n, key, &tdata)) != 0)
    +                     goto err;
    +                break;
    +           case DB_RECNO:
    +                if ((ret = __ram_append(dbc_n, key, &tdata)) != 0)
    +                     goto err;
    +                break;
    +           default:
    +                /* The interface should prevent this. */
    +                DB_ASSERT(dbenv,
    +                    dbp->type == DB_QUEUE || dbp->type == DB_RECNO);
    +
    +                ret = __db_ferr(dbenv, "DBC->put", 0);
    +                goto err;
    +           }
    +           /*
    +            * The append callback, if one exists, may have allocated
    +            * a new tdata.data buffer.  If so, free it.
    +            */
    +           FREE_IF_NEEDED(dbenv, &tdata);
    +           pkey.data = key->data;
    +           pkey.size = key->size;
    +           /* An append cannot be replacing an existing item. */
    +           nodel = 1;
           } else {
                /* Set pkey so we can use &pkey everywhere instead of key.  */
                pkey.data = key->data;
    *** 1400,1405 ****
    --- 1454,1465 ----
      skip_s_update:
    +       * If this is an append operation, the insert was done prior to the
    +       * secondary updates, so we are finished.
    +       */
    +      if (flags == DB_APPEND)
    +           goto done;
    +      /*
            * If we have an off-page duplicates cursor, and the operation applies
            * to it, perform the operation.  Duplicate the cursor and call the
            * underlying function.

  • Problems with remote app solution suggestion!

    Hello,
    I have been trying to get the Remote app to work on my windows 8 PC, but to no result. I am using an iPhone 5S. I believe the problem is that my PC is a desktop connected to the internet via ethernet. This is a very common issue. I spent around 5 hours on the phone with apple support, but all I got from them was a very long conversation. Even the senior support supervisor could not help me. Many people use iTunes on PCs that are connected via ethernet and they are unable to use the Remote app because it lacks a very basic and simple feature: to enter the host IP manually. When a PC is connected via ethernet to a router rather than wirelessly it cannot be found by the iPhone as a device that exists in the network, so you need to find it manually. Hopefully some of the higher-ups will hear this simplest of ideas and implement it, so the remote app no longer gets 1 or 2 star reviews saying it does not work.

    Welcome to the Apple Community Johnson4o.
    That's not correct, homesharing works over wired, wireless and mixed. If you have enabled homesharing correctly on both devices, then there' same problem with your network or settings, there is no need to add manual IP's, in fact there is nowhere to do so.

  • Office Home and Student 2010 Install problems with a Key Code Err..

    I had to install a new hard drive, lost everything..So I upgraded to Windows 7 Professional ..
    I own a the 2010 Home and Student CD bought at the Microsoft store...Doesn't come with Outlook...
    So I ordered the Home and Business 2010 disc with Service Pack 1 Included, this has 2010 outlook ...It loaded and worked fine up to the point I had to replace my Drive with New Windows 7 Pro...
    Everything loaded find, but every time I try and use it, its acts like it is caught in some kind of loop...It keep trying install and configure, then ask for my Key Code every time, sort of like a OLMAP132.Dll err...I did manage to make it work once, I even
    got back the test email from Microsoft after setting up Outlook....Then when I rebooted the system, this same loop action started ...
    I have uninstalled this at least 4 times, searched for anything with ties to Microsoft office, and uninstalled it..Then did a New Clean Install...Still getting this key Code question every time I open up a Office program....So, I am saying without a doubt,
    2010 Office Home and Student and Business WILL NOT RUN on Windows 7 professional ......If you have any idea how to fix this..Please respond with facts on how to repair this please....

    Greta,,,After down loading ( Off Cat ) tools...I saved that program...However, there is another major problem with Your Instructions I ran into...It seems I'm not the trusted source to change files such as the Mapi32.dll files..So I was unable to attempt
    your repair ...However I have found instructions for the task, but it seems very complicated for sure.. Here are the instructions, and I  would like for you and maybe a co-worker to check these.. before I make any changes in system..
    How to Change the Trusted Installer name...
    1. Right Click on the File Or directory.
    2.Click On properties, on the Right Click menu.
    3.Click On "" Security "" tab
    4.Click On " Advanced" Button on the bottom.
    5.In the advance Security Dialog Window, Click on "" Owner "" tab
    6.Here you will able to see the Current Owner ( ie: Trusted Installed )
    7. To take owner ship of the object, click on the Edit button, Give permission to UAC , the highlight the user name in the " Change Owner To" box that you want to assign as the owner for the object. Then Click " OK " to finish the process.
    8.Back in the Advanced Security Settings Window , You will see the current owner has changed to the user you just selected.
    9.Click the ""OK "" and exit this window.
    10. Click "'OK"" again, to exit completely from the Properties window..
    11. Repeat Step 1 to 4 to open the object's Properties Window again...
    12.Back in Object's Properties window, click on the edit button , and confirm the UAC elevation request.
    13. Highlight the Administrators in the " group of users names"" box. If the user ID or group that you want to manage the permissions for the object doesn't exist, Click on.."" Add"" button, and type in the user name or
    group name desired into the "" Enter Object names to select ( can use Everyone as user Name)" box and finish off by clicking on the "" OK""
    14. In the permissions for Administrators box below ( or any other user name or group name you choose). click on ""Full Control"" under the ""Allow"" column to assign full access rights control permission to Administrator's
    group....
    http//windows.microsoft.com/en-us/windows-vista/troubleshoot-access-denied-when opening-files-or-folders.

  • Query problem with accumulated key figures

    Hi BI Gurus!
    I have a report problem that I hope you can help me with!
    In my report I have 2 key figures. One for accumulated revenue previous year (KF1) and one for accumulated revenue current year (KF2). Both key figures should be presented in a graph in monthly buckets.
    January figures from both the key figures shoule be presented in the same bucket. Therfore I can't use 0CALYEAR since we have the "year" information in there. Instead I'm using 0CALMONTH2 which is only two digits, 01 for January. That way I can map figures from both previous year and current year in the same bucket.
    I need the figures to be accumulated and this is what I have problem with. When I run the report today in February 2010 it looks like this:
    Month   KF1   KF2
    01        10     15
    02        10     20
    03        15    
    04        10    
    05        20    
    06        10    
    07        10    
    08        15    
    09        15    
    10        20    
    11        20    
    12        10    
    This is how I would like the report to look like:
    Month   KF1   KF2
    01        10     15
    02        20     35
    03        35    
    04        45    
    05        65    
    06        75    
    07        85    
    08        100    
    09        115    
    10        135    
    11        155    
    12        165
    I have tried to use the setting "accumulated" for the key figures but then I get this result:
    Month   KF1   KF2
    01        10     15
    02        20     35
    03        35     35
    04        45     35
    05        65     35
    06        75     35
    07        85     35
    08        100   35
    09        115   35
    10        135   35
    11        155   35
    12        165   35
    Since the KF2 is revenue for current year and I run the report in February I don't want any figures to be displayed in Mars...
    I have tried to restrict the key figures by 0CALMONTH2 and 0CALYEAR. The KF1 is havein a restriction to only show values for 0CALYEAR - 1 and an interval for 0CALMONTH2 from JAN - DEC.
    The KF2 is having a restriction to only show values in the interval "first month in year - current month" (in this example JAN - FEB) for 0CALMONTH2. And current year for 0CALYEAR.
    Despite my restrictions for KF2 the numpers repeats itself for every month...
    Any suggestion how I can resolve this?
    Best regards
    Anders Florin

    Hi Khaled and thank you for trying to help me!
    I agree with you and think the users should accept the report as it is. But they are claiming that top management will not accept this and they would really want this to be fixed the whay that they want. I have tried to push back on this and said that I'm not sure that it can be resoleved and that it could cost them a lot of money if I try.
    But I will try to resolve it for them if I have spare time in the end of the project. I have not promised them anything but it would really be nice if I could fix it.
    So when you say I need to use a structure and a calculated key figure. How should the calculated key figure and the structure be configured?
    If I use a structure in the rows I guess I can't use same object in calc.key.figure right? Like if I use 0CALMONTH2 in the structure I'm not able to restrict the key figure with the same object? If that is correct I also have a ZMONTH object, different story why I have that... , that I can use in the same way as 0CALMONTH2. Or is this only a problem when I use "local" formulas within the query and not using a "global" calculated key figure? Cause I have only used the "loacal" formula calculated key figure in this report....
    Br
    Anders

  • Problems with remote control and user accounts - error 1759?

    We're running:
    -XP Pro SP2 clients with Zen SP1 IR3a agent, 4.91 SP2 Netware client.
    -We are NOT running Middle Tier.
    -Novell servers are running Netware 6.5 SP7, E-directory 8.7.3.10b or 8.8.
    -Zen server is also SP1 IR3a.
    We have no problem using remote control on workstation objects. We are having intermittent issues with remote controlling user objects. When the issue occurs, we receive the following error, "Error 1759: The selected user is not logged in on any workstations" even though the user is in fact logged in. After some more research, it appears that the "networkAddress" attribute of the user object is blank so we feel that this is the root cause. My question is what would cause the networkAddress attribute to randomly not update? For instance we had a user (verified his login) who we could not remote via the user object (workstation object worked). We checked his networkAddress attribute and found that it was empty. User rebooted and logged in again and his networkAddress attribute populated, and then we could remote control him via the user object. Now this isn't always the case after a reboot. There doesn't appear to be any pattern to when the networkAddress attribute does or does not update. In fact, this particular user has a laptop so he boots it up fresh every morning yet he was not showing a network address when he logged in initially today.
    We've followed the troubleshooting steps in Novell Documentation without any success. Is there anything else that we might be missing, especially with respect to getting the networkAddress attribute to update? We ran a DSreport on that attribute and found about 500 out of a total of 1500 users had no networkAddress. Some of those are sure to be legitimate but that number is much too high for the number of people that should be in the office.
    I've read some older threads on the subject but none of them really provide a firm solution. Also most of the older threads reference Middle Tier which we are not using.
    Thanks in advance.

    > 4.91 SP2 Netware client.
    You could try this TID:
    "A user will no longer have an entry in their "Network Address" attribute
    even though they are logged into the eDirectory Tree."
    http://www.novell.com/support/viewCo...1262&sliceId=1
    "Resolution"
    "This was fixed in the 4.91 SP3 client. NWFS.SYS was modified so that it
    will check the monitor connection on a reconnect and if it is not connected
    close the connection and try and get a new monitor connection to the tree.
    Prior to the 4.91 SP3 client, the solution is to have the user login again
    so that it issues the NDS Finish Login request again that will populate
    Network Address again."
    Regards
    Rolf Lidvall
    Swedish Radio (Ltd)

Maybe you are looking for