Problems with static IP from TP-Link Access Point

Hello Guys!
I'm new with Apple - i got a Macbook Pro Mid 2012 since 2 weeks.
Everythings running fine and im really happy with the Macbook - except of the Wifi.
I have the problem that the internet connection is just working temporarily, sometimes its just working for 1 minute, then its just stopping. im still connected to the wifi, no connection abortion. websites are just not getting loaded or just half.
i cant find a solution for it, so please help me
I connected a TP-Link tl-wa801nd with a ethernet cable to our companys network - creating a wifi network access point with which i can connect to with my devices (Macbook Pro, iphone and Win7 PC)
I have to give my devices a static ip, when i want to connect with it:
IP: 192.168.0.151 - 192.168.0.199
Subnet mask: 255.255.255.0
Router and DNS: 192.168.0.1
These preferences are working perfect with the iphone, Win 7-PCs and some friends Android or BB phones. No problems.
Except of the Macbook pro:
I got the newest Mavericks on it and the same network preferences (except of a ascending ip address and the search domain 192.168.0.1)
But like i said above - network is just working temporarily, sometimes for 1 minute, then stopping for 10 minutes... The problem must be the macbook, because every other devices is working fine.
Thank for your helping answers
banana-benjiro

Hello banana-benjiro,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Safari 5.0.1 or later: Slow or partial webpage loading, or webpage cannot be found
http://support.apple.com/kb/ts3408
Best of luck,
Mario

Similar Messages

IOS 6.0.1 - Problems with certificate based authentication on wireless access point

Hi all
We are using iPad 2 as order terminals in our shops for about 5 months. Some of the iPads (the first who entered the field) started to cause problems now. These iPads are no longer able to keep long-term connection to the wireless access point in our stores. After selecting the SSID a successful authentication using the stored EAP-TLS certificate is performed (this can be seen in the log files of our wireless controller and by the IP adress that is given by DHCP). But within seconds the affected iPads opening up a captive portal page (empty, without contents) and separates the connection to the SSID after a short time again.
Affected are currently only iPads 2 with iOS 6.0.1, which were staged about 5 months ago. The newer devices with iOS 6.1+ connect without problems and open no captive portal page. The first cases occurred on the last Wednesday. Before that everything worked without difficulty. No modifications took place on the security structure. The numbers of affected devices increased until all iOS 6.0.1 were affected.
Access to other SSIDs (without use of certificates, by entering a key) for the devices is still possible (the devices does not open an captive portal page). The DHCP scope is not used up, so there are enough IP addresses available.
"Newer iPads" with an iOS of 6.1+ are are showing no problems on the same wireless access point, where the older devices are rejected. New and old devices use the same certificates and authentication mechanisms.
In the analysis of the issue, it turned out that the problem can be solved by an update to iOS 6.1.3. Subsequently, the iPads will be able to rebuild a connection with the access point, without a captive portal page.
Since the bandwidth is very narrow dimensioned in our stores, the communication of the iPads was severely restricted. Thus, the iPads are for exampleare accessible for the APNS but can not find iOS updates or check for their availability.
A comprehensive update to iOS 6.1.3 is currently excluded.
Does anyone knows this issue? What else can be done (except from updating)?

I will answer my own question in case it helps anyone else.
It would "seem" the ios 6 devices try the proxy and if that is not working they resort to the def gateway.
To Fix I did the following:
Brocade WIFI network has IPS and Advanced Firewall rules that seemed to be tthwarting some traffic, the iphones would then try the default gateway and be blocked at the FW.
I disabled the IPS and the Advanced Firewall Settings on the wifi as they are redundant to our main IPS and firewall that all traffic flows through anyway. I will tune it later, but when the CEO is demanding a fix "**** the security, full speed ahead"
Created some rues on the firewall to allow...
- IMAP-SSL (port993) outbound
- SMTPS (port 465) to yahoo servers outbound
- tcp port 587 to yahoo servers outbound
- https to akamai servers
Most http and https goes through the proxy as it should, BUT...
It seems that the akamai traffic allways ignores the wifi proxy settings and just heads straight for the default gateway. I suspect there is a bug in the icloud app?
Hope this helps someone else.
-Bo

Problem with creating an Infrastructure Network (via Access Point) for WLS 9163.

Hi,
I am trying to connect the WLS 9163 to an Infrastructure Network (via an Access Point). I have connected it via an Ethernet cable and am using MAX to configure it.
The setting are as below:
Obtain IP Address through: DHCP
Country: US
Radio On: Yes
SSID: wireless (selected from drop down implying the wireless network is detected)
Wireless Mode: Infrastructure
Authentication: Open
After doing these settings, I click on Save Settings. The device reboots itself and takes the IP address, Subnet mask and default Gateway automatically. The WLS link LED on the device is also turned on. The System State is 'Connected' and both the Wired and Wireless Connection Status is shown as 'UP'.
So far so good.
Now if I remove the wired connection and refresh the device, it does not get connected via wireless (which I believe it ideally should). The System State is shown as Disconnected.
I am using a Phoenix Contact WAP and have set the authentication as Open.
Please suggest some solution.

I had this exact same problem and it took me a while to figure out. As strange as this sounds, I figured out that for some reason if I had the WLS-9163 too close to the router and I pulled the wired connection, the wireless connection could drop. I read on a post in a different forum about someone removing their antenna and it working just fine so I tried that and it worked off and on but mostly off. So I figured out that the further distance away I was the better the connection stability was and I got far enough away from the router to where it was a steady solid wireless connection. This sounds really backwards from what it should be and was really bizarre but I tried different routers, used all different types of settings, had the latest firmware and had all of the equipment sitting on my desk and could not get it working once I removed the wired connection. This may not solve your problem but this worked for me so I thought I'd share that info. I was just so shocked to figure out being too close to the router seemed to be screwing my stuff up.

Problem with removing items from a linked list

Hello,
I have something weird going with my code. Below is the snippet
if (ParserDataList.isEmpty())
try {
Thread.sleep(10)
catch (InterruptedException e) {
else
data = ParserDataList.remove();
ParserDataList is declared as a LinkedList. Occasionally I receive the error on NoSuchElement on the remove. I put a try/catch around the remove and print out the value of ParserDataList.isEmpty which is always false. I am very confused on why if the linked list isn't empty I can't remove a data item. There are no other threads that remove data. Thank you in advance for any assistance on this problem.

I am changing it from linked list to blocking queue however I do have a question about what I should use to poll the data? Instead of a remove should I use take which seemed to remove the first element and if there wasn't one wait until there was. I was trying to not have the threads blocked because I do need to stop them when a disconnect is sent from the main thread.

Good day I need the solution to the problem presented my iphone with ios upgrade from 7 to access any app, I get a message that says "log on to itunes to receive notifications"

Good day I need the solution to the problem presented my iphone with ios upgrade from 7 to access any app, I get a message that says "log on to itunes to receive notifications"

After the iOS 7.0.2 update words with friends is not working for me either. When I attempt to open the app it just closes itself after a few seconds of being open. This happens every time I attempt to open it.

Problem with PremiereProCS5 and AfterEffectsCS5 Dinamic Link!

Problem with PremiereProCS5 and AfterEffectsCS5 Dinamic Link!
I installed PremiereProCS4, and after, "Adobe Master Collection Suite CS5" in Italian Language, with PremiereProCS5 and AfterEffectsCS5 on OS Windows7x64Bit.
I made a first composition with AfterEffects, from PremierePro by choosing "Adobe Dinamic Link">"Replace with AE Composition".
After that, I made another second version of the same project, directly with AfterEffects.
I want replace this AE version with existing version, in PremierePro.
Thus, I selected "Adobe Dinamic Link">"Import AE Composition".
1) But, the problem is that the new, fresh AE composition is not found!
The Dinamic Link, in PremierePro, doesn't refresh the window where it is located the new AE Composition called "n°2" made last with AE, (not with DynamicLink)!
There are available 3 files, that I made, but all the files display only the old composition called "n°1", made with DynamicLink, and with "Replace with AE Composition" command!
The composition made with AE directly, is not displayed!
Why?
In fact, I tried to right click the clip, in PremiereProCS5 timeline, choosed "Replace with Clip">"From Folder" and selected the last imported AE composition: the composition is allways the OLD file made with DynamicLink, not the file made directly with AE!
Why?
Help!
Horsepower0171.

"...or if you must use multiple projects, start each one from scratch instead of duplicating and renaming..."
Yes!
I made from scratch these new projects with AECS5, called:
"Montaggio_02_CS5_04_Franzi_AECS5 - Composizione collegata 02.avi" and
"Montaggio_02_CS5_04_Franzi_AECS5 - Composizione collegata 03.avi",
not renamed, nor duplicated.
-But PremierePro and DynamicLink doesn't display those in the window!

Problems with the vba command sendkeys in Access 2013.

Hi, I have problems with the vba command sendkeys in Access 2013.
I use a text field (no control) in a form. By means of the VBA command SendKeys "+ {DELETE}", 1 I get the text in memory from the text field, then place (paste) the text in a Word document. The command line sendkeys
is followed by moving the focus to a particular control. In Access 2003, which went smoothly. Now the sendkeys command is executed only in Access 2013 in the control that then receives focus. If the procedure ends with the sendkeys command then it works well.
The procedure with the sendkeys command is activated by a button on a form.
Who can help me?
private user

Hi H.Plmp,
Based on the description, you want to call the sendkeys from a button.
>> use a text field (no control) in a form. By means of the VBA command SendKeys "+ {DELETE}", 1 I get the text in memory from the text field<<
What did you mean that you no control? And how did you get the text in memory from the text field? Also I am not able to understand the exact reason that the command doesn't works in Access 2013.
And based on the test, sendkeys "+ {Delete}" works well for me when I set a focus for the textbox control. Here is th test code:
Me.Controls("txtField1").SetFocus
SendKeys "+ {DELETE}", 1
If I misunderstood, please feel free to let me know.
Regards & Fei
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Problem with controlling Annotations from Excel VBA

Hi,
I have a PDF document that has plenty of sticky notes attached to it. These sticky notes have been added by multiple authors on all pages of the document. I am trying to import the contents of these sticky notes, their author and the page number to an excel spreadsheet. I am using Excel 2007 and Acrobat Professional 9.0.
This is the code that I am currently using to import the sticky notes, but the problem that I am facing is that when I run the macro -
Same sticky note contents, author and page numbers are imported multiple times
Not all sticky notes are imported, only some of them appear in the final excel spreadsheet
When I compare the number of sticky notes to that in the original PDF file, the number is correct. But the content is repeated content and that is the reason why only some of the sticky notes are imported.
This is an activity that I need to do on regular basis and the number of sticky notes that I need to import to excel may range between 100 to 200. It is really difficult to do this task manually, so an excel VBA macro could prove really helpful.
Sub ImportComments_Click()
Dim Fpath As String
Dim WordObj As Object
Dim wbkOutput As Excel.Workbook
Dim iRow As Integer
Dim i, j, k As Integer
Dim lRet As Long
Dim objAcroAVDoc As New Acrobat.acroAVDoc
Dim objAcroPDDoc As Acrobat.AcroPDDoc
Dim numPages As Long
Dim lAnnotscnt As Long
Dim Subtype As String
Dim NumComments As Long
Dim AcroApp As Acrobat.AcroApp
Dim objAcroPDPage As Acrobat.AcroPDPage
Dim annot As Acrobat.AcroPDAnnot
Sheets("Defect Log").Select
Range("L3").Activate
Fpath = ActiveCell.Value
Sheets("Defect Log").Select
Range("A1").Activate
i = 0
Do While (Not (IsEmpty(ActiveCell.Value)) Or Not (IsEmpty(ActiveCell.Offset(0, 1).Value)) Or Not (IsEmpty(ActiveCell.Offset(0, 2).Value)) Or Not (IsEmpty(ActiveCell.Offset(0, 3).Value)) Or Not (IsEmpty(ActiveCell.Offset(0, 4).Value)) Or Not (IsEmpty(ActiveCell.Offset(0, 5).Value)) Or Not (IsEmpty(ActiveCell.Offset(0, 6).Value)) Or Not (IsEmpty(ActiveCell.Offset(0, 7).Value)) Or Not (IsEmpty(ActiveCell.Offset(0, 8).Value)) Or Not (IsEmpty(ActiveCell.Offset(0, 9).Value)) Or Not (IsEmpty(ActiveCell.Offset(0, 10).Value)) Or Not (IsEmpty(ActiveCell.Offset(0, 11).Value)) Or Not (IsEmpty(ActiveCell.Offset(0, 12).Value)) Or Not (IsEmpty(ActiveCell.Offset(0, 13).Value)) Or Not (IsEmpty(ActiveCell.Offset(0, 14).Value)))
i = i + 1
ActiveCell.Offset(1, 0).Select
Loop
iRow = i + 1
Set wbkOutput = ActiveWorkbook
lRet = objAcroAVDoc.Open(Fpath, "")
Set objAcroPDDoc = objAcroAVDoc.GetPDDoc
numPages = objAcroPDDoc.GetNumPages()
Set objAcroPDPage = objAcroPDDoc.AcquirePage(0)
For k = 1 To numPages
lAnnotscnt = objAcroPDPage.GetNumAnnots()
For m = 0 To lAnnotscnt - 1
If lAnnotscnt = 0 Then Exit For
Set objAcroPDAnnot = objAcroPDPage.GetAnnot(m)
If (objAcroPDAnnot.GetContents <> "" And objAcroPDAnnot.GetSubtype = "Text") Then
Cells(iRow, 5).Value = k
Cells(iRow, 2).Value = objAcroPDAnnot.GetContents()
Cells(iRow, 11).Value = objAcroPDAnnot.GetTitle()
iRow = iRow + 1
End If
Next m
Set objAcroPDPage = objAcroPDDoc.AcquirePage(k)
Next k
lRet = objAcroAVDoc.Close(1)
Set objAcroAVDoc = Nothing
Set objAcroPDAnnot = Nothing
Set objAcroPDPage = Nothing
Set objAcroPDDoc = Nothing
End Sub

Make sure you are current with 9.x patches, just on general principles.
The code seems fine – nothing jumping out at me.
You can also look at using the JSObject methods and trying this via the JavaScript stuff – that will give you more access to the Annotation information…
From: Adobe Forums <[email protected]<mailto:[email protected]>>
Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
Date: Thu, 24 Nov 2011 04:25:12 -0800
To: Leonard Rosenthol <[email protected]<mailto:[email protected]>>
Subject: Problem with controlling Annotations from Excel VBA
Problem with controlling Annotations from Excel VBA
created by apreeti<http://forums.adobe.com/people/apreeti> in Acrobat SDK - View the full discussion<http://forums.adobe.com/message/4044740#4044740

I have a 13.5 month old Ipad2, wifi only that has had problems with wifi com from the beginning. I am learning that this is not unusual for apple. Any suggestions?

I have a 13.5 month old Ipad2, wifi only that has had problems with wifi com from the beginning. I am learning that this is not unusual for apple. Any suggestions?
ronald1094

Try #5.
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Problems with 'Order Prints' from Aperture 2.1.3 Mystery borders

*Some background:*
I've been using Aperture for about 3 months now, importing most of my iPhoto library into the program. I have only recently started shooting in RAW format, most of my photos image files are in JPG format. In the past, I've had no problems with obtaining prints from within iPhoto or to a limited extent Aperture. So, far as I know my program is up-to-date. I have 2 plugins installed: Aperture2twitter and *flickr export Lite* both of which work acceptably.
*The problem:* I ordered 317 4×6 prints from my aperture library.
Every photo has a 1/4″ border on both sides of the image, i.e. the printed image is only 4×5 1/2″. I have never ordered this quantity before, but I don’t believe that was the problem, it appears that the processing machine was misaligned and no one reviewed the prints prior to shipping.
I tried again, on 4 different images ... all JPG files with 3 out of 4 were OK, but one exhibited the "border" issue.
I haven't a clue what is going on here. Apple implied +(via email)+ that I would have to individually crop every photo to ensure proper aspect ratio. This makes no sense to me at all, as I have never had this kinda problem before.
Could the plugin(s) be interfering with the s/w? Is there a trick to having photos printed from within Aperture that was not present in iPhoto?
Any thoughts on what the problem is would be greatly appreciated.
Thanks
-john

I believe that I've solved this problem, with the help of the folks at Apple who handle Aperture tech support using the Aperture support ID that came with the product.
So the short answer is: Aperture print services REALLY DO REQUIRE the image to be cropped (constrained as they say) prior to the data being sent to Apple Print services.
Here is the link that describes cropping http://support.apple.com/kb/HT1993?viewlocale=en_US
The process as described is cumbersome, but the support tech pointed out that in Aperture, crops are 'non-destrutive' and can be undone simply by removing the check mark on the Adjustments tab of the image you crop. *This means that you do not have to make a duplicate image for cropping.*
So, here is the process that I arrived at to ensure that my "order prints" job turned out:
1. create an album of all the photos you want to submit for printing.
2. for each image call up the Crop HUD by pressing 'c' on the keyboard.
3.select the aspect ratio that you want for your photo. Make sure that it does NOT SAY Master Aspect Ratio, or Main Display Aspect Ratio.
4. Crop the photo
on the adjustments tab you can see the X and Y data and Height / Width information which can be undone.
5. Submit your print request to Apple for all the cropped photos.
When the prints arrive, you can compare the prints with the submitted photos. They should all be good. You can then delete the album (since it really is not a physical thing) or keep it for reference.
It all seemed a bit arcane to me, as I never had to worry about this in iPhoto. It must be that iPhoto sends different data than Aperture. I have just received 200 + prints back from Apple Print Services with about 98% success rate. I just have to adjust my thinking and my process when dealing with Aperture.

Niggly problem with Hotmail - Sending from a third party email address

I need true push email on my BlackBerry, but also need access from a PC and need to send from my own email address. The easiest way I've found to do this is to forward all emails to my own address to a Hotmail address and use Hotmail as my main provider. Everything works as it should - I've got Windows Live Mail setup on my PC and all emails are sent to the BlackBerry the instant they're received. However, I've got a niggling problem with sending emails from the BlackBerry...
On the Hotmail website, I've set my own email address as the default "From" address and in Windows Live Mail, I've set my email address as my own address. So, if I send email from the Hotmail site or from Windows Live Mail, my own email address is used as the "From" address and not the Hotmail address. If I send email from the BlackBerry, it uses the Hotmail address as the "From" address and not my own address. I've set my own email address as the "Reply To" address in BlackBerry Internet Service but it still shows the Hotmail address. I can't see anyway to change this and it's the only problem I have...
I have tried the GoogleMail service, and this worked fine but every email I sent (either from Google Mail, Outlook or the BlackBerry) would copy itself to the BlackBerry and was getting a bit of a pain.
I have also tried Yahoo Mail but this wouldn't allow me to send email from another email address.
Any ideas from anyone? Either to allow emails sent from my BlackBerry to show my own email address as the "From" address, or to stop emails sent through Google Mail to copy themselves to the BlackBerry?

clnock wrote:
I need true push email on my BlackBerry, but also need access from a PC and need to send from my own email address. The easiest way I've found to do this is to forward all emails to my own address to a Hotmail address and use Hotmail as my main provider. Everything works as it should - I've got Windows Live Mail setup on my PC and all emails are sent to the BlackBerry the instant they're received. However, I've got a niggling problem with sending emails from the BlackBerry...
On the Hotmail website, I've set my own email address as the default "From" address and in Windows Live Mail, I've set my email address as my own address. So, if I send email from the Hotmail site or from Windows Live Mail, my own email address is used as the "From" address and not the Hotmail address. If I send email from the BlackBerry, it uses the Hotmail address as the "From" address and not my own address. I've set my own email address as the "Reply To" address in BlackBerry Internet Service but it still shows the Hotmail address. I can't see anyway to change this and it's the only problem I have...
I have tried the GoogleMail service, and this worked fine but every email I sent (either from Google Mail, Outlook or the BlackBerry) would copy itself to the BlackBerry and was getting a bit of a pain.
I have also tried Yahoo Mail but this wouldn't allow me to send email from another email address.
Any ideas from anyone? Either to allow emails sent from my BlackBerry to show my own email address as the "From" address, or to stop emails sent through Google Mail to copy themselves to the BlackBerry?
Hi,
I've had this sent items in my inbox, problem with Gmail. You can add a filter from the settings page of your gmail account. The filter should be applied to all emails from your email address [[email protected]] and skip the Inbox should be selected.
Have you tested the "Reply to" option properly? Send a mail from your BB to a friend and ask them to hit the reply button, see which account it goes to.
===========================================================
If I've helped, please click the Kudos button.
If your issue has been resolved, please mark it as solved.
Joe
===========================================================

Problem with NEF files from Nikon D4

Hi everyone. I find a problem with nef files from my Nikon D4. When files are open in ViewNX2 (free viewer software from Nikon) they are perfect, as shooted... but in ACR they are very different... I use LR4 or CS5 with ACR 6.7 and the difference seems to be linked at D-Lighting function. My impression is that ACR dont read this option and picture are very very dark that original shootings. Anyone have this problem?

This question used to be answered in the FAQ before they revised it. So, here we go again. ViewNX is capable of reading all of the in-camera settings such as, camera profile, saturation, sharpness and other settings. It is capable of doing this because it is Nikon Software, and they have the ability to program it to read the settings from their raw images. Lightroom does not read those settings from Nikon cameras or any other brand of camera. Part of the reason is that different camera makers store those settings differently.
When I first started using Lightroom I adjusted one of my images that represented what I normally shoot until it looked the way I wanted it. Then I saved those adjustments as my default settings for the camera. From that point onward, whenever I import images those settings are automatically applied, and it takes care of the vast majority of my images. Of course, I still have to make individual adjustments. But my default settings greatly reduce the amount of how they work that I have to do.
Active D-lighting is is one of those features that Lightroom does not recognize. You would be well advised not to use it, or else create a preset to simulate its effect. It will provide no benefit to your Lightroom work.
This is a fundamental difference with Lightroom, and something that must be understood and implemented if you are going to use the program effectively.
I realize this question was asked in the ACR forum and I referenced Lightroom throughout. But the principle is the same, and the recommended procedure is the same.

CS 4 Dynamic Link to Encore doesn't work most of the time. Encore stops operating after opening and periodically Premier Pro stops working. I'm told that there has been a problem with CS4 when using Dynamic Link to go to Encore and build CD's. Is there

CS 4 Dynamic Link to Encore doesn't work most of the time. Encore stops operating after opening and periodically Premier Pro stops working. I'm told that there has been a problem with CS4 when using Dynamic Link to go to Encore and build CD's. Is there a way around this? Is there a patch to correct it?

To build CD's???
What problem does Encore have with DL?
If DL is not working properly for you the way around this is to export from Premiere to either mpeg2-dvd for DVD or BluRay H.264 for BD-disks and import the files in Encore.

Face time fades out and then tries to reconnect on new ipad retina display on WiFi. Iphone 4s has no problem with face time from exact same location and same contact. WiFi signal strong on both devices. What gives?

Face time fades out and then retries to connect (new Ipad Retina Display) on WiFi. Iphone 4s has no problem with face time from same location and same contact. What gives?

rdallas001 wrote:
Is the router to small?
Not necessarily, if you are using Facetime all the data goes through your WiFi router, your cable/DSL modem, your ISP and the internet to Apple's Facetime servers and then, in reverse, down to the Facetime recipient. If your ISP connection is too slow or there is excessive traffic on the internet you can have Facetime problems.
Most WiFi routers can handle this unless others in the house are also using WiFi at the same time. The problem may be your ISP connection or congestion on the internet, etc.

Problem with date format from Oracle DB

Hi,
I am facing a problem with date fields from Oracle DB sources. The date format of the field in DB table is 'Date base type is DATE and DDIC type is DATS'.
I mapped the date fields to Date characters in BI. Now the data that comes to PSA is in weird format. It shows like -0.PR.09-A
I have changing the field settings in DataSource to internal and external and also i have tried mapping these date fields to text fields with out luck. All delivers the same format.
I have also tried using conversion routines like, CONVERSION_EXIT_IDATE_INPUT to change format. It also delivers me the same old result.
If anybody of you have any suggestions or if anybody have you experienced such probelms, Please share your experience with me.
Thanks in advance.
Regards
Varada

Thanks for all your reply. I can only the solutions creating view in database. I want some solution to be done in BI. I appreciate if some of you have idea in it.
The issue again in detail
I am facing an issue with date fields from oracle data. The data that is sent from Oracle is in the format is -0.AR.04-M. I am able to convert this date in BI with conversion routine in BI into format 04-MAR-0.
The problem is, I am getting data of length 10 (Output format) in the format -0.AR.04-M where the month is not in numericals. Since it is in text it is taking one character spacing more.
I have tried in different ways to convert and increased the length in BI, the result is same. I am wondering if we can change the date format in database.
I am in puzzle with the this date format. I have checked other Oracle DB connections data for date fields in BI, they get data in the format 20.081.031 which will allow to convert this in BI. Only from the system i am trying creating a problem.
Regards
Varada

Problems with static IP from TP-Link Access Point

Similar Messages

Maybe you are looking for