Problems with summary field in group footer

Hello
In a dynamically generated Report in c#, i made a sum in some group footer i have generated.
the values to sum are integers. But Crystal show a result like that : 1254.00 and i want it this 1254.
here the code use to make the sum in the group footer
l_CrySectionSousTotal = m_ReportClientDocument.ReportDefController.ReportDefinition.get_GroupFooterArea(b_intNumGroupe).Sections[0];
l_champsTotal.FieldFormat.NumericFormat.RoundingFormat = CrRoundingTypeEnum.crRoundingTypeRoundToUnit;
l_champsTotal.FieldFormat.NumericFormat.NDecimalPlaces = 0;
l_champsTotal.DataSource = "Sum ({ado.Poids})";
m_ReportClientDocument.ReportDefController.ReportObjectController.Add(l_champsTotal, l_CrySectionSousTotal, -1);
it's seem's like the NDecimalPlaces property do nothing.... i don't understand.
if you have an exemple of use of NDecimalPlaces ....
thanks for you help.

Hello, Jonik;
The formatting changes will not take effect unless you tell the field not to use the default values.
So, try adding a line of code such as:
l_champsTotal.FieldFormat.CommonFormat.EnableSystemDefault = False;
before:
l_champsTotal.FieldFormat.NumericFormat.RoundingFormat = CrRoundingTypeEnum.crRoundingTypeRoundToUnit;
l_champsTotal.FieldFormat.NumericFormat.NDecimalPlaces = 0;
Elaine

Similar Messages

ERROR while adding summary field in group footer

Hi all,
i am using CR Server XI R2
i am trying to a subtotal in a group header using the code below
fieldobjCls = new CrystalDecisions.ReportAppServer.ReportDefModel.FieldObjectClass();
            fieldobjCls.Kind = CrystalDecisions.ReportAppServer.ReportDefModel.CrReportObjectKindEnum.crReportObjectKindField;
            fieldobjCls.FieldValueType = CrFieldValueTypeEnum.crFieldValueTypeInt32sField;
                   fieldobjCls.Name = "Count";
            fieldobjCls.DataSource = "Count({CSP_PROCESS_REPORT.userid})";
                  fieldobjCls.Left = 1000;
            fieldobjCls.Top = 700;
            fieldobjCls.Width = 1000;
            fieldobjCls.Height = 300;
            boSection = rcDoc.ReportDefinition.get_GroupHeaderArea(0).Sections[0];
            rcDoc.ReportDefController.ReportObjectController.Add(fieldobjCls, boSection, -1);
as a result i am getting the error as
Cannot find the section in the group area pair of the summary field.
how to solve
Padmanaban V

Try adding the summary field in the Report Designer first, then do the same steps in code. If it doesn't work in the deisgner it won't work in code.

Problem with currency field in smart form

hi
friends ..
i had problem with currency field in smartform iam printing 5 currecny
fields after the main window .But not getting printed on right way gets printed down from the given mesaurement and i get lot of gap betwen the
each fields for ex.
33,260.00
120.00
0.00
0.00
0.00
i thought the the problem is with space .so iwanted to condense it but cannot as it is currency field so move into character fields .but the user want out put in currency format like 22,60.20 if i get the value in char variable i get 2260.20 which i dont want .
so pls help me how to condense or shift left and print the currency field on right place.
regards
answers will be rewarded points.

hi,
this is a normal problem u can avoid this by moveing these currencu value to a character field then print the char field us ing condece... &var(C)&..
eve if not solve the problem use the TEMPLATE node..
Please Close this thread.. when u r problem is solved. Reward all Helpful answers
Regards
Naresh Reddy K

Problem with a field set to refresh after insert at Row level

hello all,
i have a problem with a field (a serial) which is set by a db trigger at insertion. The field "refresh after insert" is properly set in the Entity and everything is refreshed correctly when i insert data via an adf form in a jspx but when i want to insert programmatically nothing is refreshed. I insert data this way :
ViewObject insertVO = findViewObject("myView");
Row newRow = insertVO.createRow();
newRow.setAttribute("mandatoryAttribute1",value1);
newRow.setAttribute("mandatoryAttribute2",value2);
<more init here but not the serial since it will be set by the DB trigger>
insertVO.insertRow(newRow);
but when i want to get back the value with "newRow().getAttribute("TheSerial");" i always get a null back and not the value set by the db trigger.
One way to get the serial is to commit after each insert but i don't want to commit between inserts.
i've tried to unset the refresh after insert and override the createDef() method to setUseReturningClause(false) as it's is advised in chapter 26.5 of the ADF 4GL dev. guide but in this case i have an exception JBO-29000: JBO-26041.
How can i get the value back properly ?
thanks
-regards

The data for the newly created row doesn't get inserted into the database until the commit is executed, so the insert trigger isn't called.
If you need to get the value without committing, then you should implement the trigger programmatically and drop the trigger from the database. The code below shows how you could do this.
ViewObject insertVO = findViewObject("myView");
Row newRow = insertVO.createRow();
SequenceImpl seq = new SequenceImpl("MY_SEQ", insertVO.getDBTransaction());
Long next = (Long)seq.getData();
newRow.setAttribute("primaryAttribute", new Number(next));
...You will need to replace MY_SEQ and primaryAttribute with the correct values for your example, but this should acheive what you want.

Selection criteria are not applied to summary fields on group footers.

I wonder if anyone can help me with this problem. I am using Crystal reports version 11.2, and my data source is a Sql Server view.
The records on the view have a date field, and I have selected all records within a given date range in "Selection Formulas".
The records are then grouped, and the Crystal summary facility used to summarise number fields on the group footers.
So for example, if my view contains four records, one with field "amount" = 2, one with field "amount" = 8, one with field "amount" = 6, one with field "amount" = 3, but only the first two records are within the valid date range, you would expect to see the first two records listed out at detail level, then field "amount" summarised at group level, with a summarised value of 10.
ie ....                record1                      2
                       record2                      8
                       group level total         10
This works fine when I run the report using Crystal's "print preview" facility. However, when the report is run from within an application written in C#.NET, the selection criteria are not applied to the summary field, so you get ..
                       record1                      2
                       record2                      8
                       group level total          19
I tried putting the date selection criteria at both record and group level, but that did not work.
I googled the problem and found an article explaining that Crystal first performs the record-level selection, then it creates the groups and totals up any summary fields, and only then does it apply the group-level selection criteria, which can lead to problems like the one I have described above. However, since I have put my date selection criteria at both record and group level, I do not understand why I still get the problem.
In one report I got round this problem by creating a formula that returned zero if the record date was outside of the valid date range, and returned the number field to be summarised if the date was valid, then summarising that formula, instead of summarising the number field directly.
In other reports I created one formula to set a shared variable as zero, then another formula to accumulate it at detail record level, then another formula to display the variable at the group footer. In other words, I did not bother with the Crystal summary facility at all, but created my own summary facility.
While googling the problem to see what other people did in this situation, I noticed that most fixes used variations of the "shared variables and formulae" fix to get round the problem.
The problem is that I have lots of complex reports and it will take ages to replace the summarised fields with shared variables and formulae. The reports were initially tested with "Print Preview" so we did not notice this problem until the C#.Net application was ready to use them. And I can't believe that you are simply meant to ignore the summary facility and re-invent the wheel by doing it all manually.
Please tell me that there is something simple that I have been doing wrong!!! If I have not given enough information for you to answer, please let me know.
Thanks,
Anne-Marie

Hi, Anne-Marie;
You may be running into a common issue that is docuemented here:
[SelectionFormula|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233303334333833393335%7D.do]
Regards,
Jonathan
Edited by: Jonathan Parminter on Mar 16, 2009 8:03 AM

Problems with Adding Fields/Columns to Crosstab in XI

Post Author: ph03nix
CA Forum: General
I am having problems with formatting a crosstab report in CRXI and am hoping that someone has a solution.
The crosstab report is a subreport, and requires the following columns, grouped by Firm (also not working optimally, but at least working):
Evaluator, Factor1Rate,[Factor2Rate, .., FactorNRate], Summary, UpdateDate, UpdatedBy
Where:
Evaluator is the person that did the evaluation that resulted in each rating (formula field)
Factor1Rate, etc, may have one, many, or all of these be applicable - there can be up to 15 of these. Each FactorRate column is to display the "rating" given by the Evaluator in the corresponding row/column (this much works). The table heading is a formula, but the corresponding rate is not.
Summary should display "Complete" if and only if there is a Comment field (not displayed) filled out for each FactorNRate that has a value of 0, 1 or 5 - otherwise it is blank
DateEntered is one of 2 fields ("last_updated" , or "creation_date" if last_updated is null - a formula field)
UpdatedBy is the last name of the person who last touched the ratings (formula field)
I have gotten the FactorRates to display in the headers, and gotten the corresponding rates to display underneath them, but I cannot seem to add any other columns to the report - they are either added as headers with the factor_rating columns repeated as subgroups (with incorrect data), or are added under existing headers with duplicates of the ratings. I just want to add one column for each field as if it were a normal (non-crosstab) table.
TIA!

the 3 last files
Attachments:
Z1&Z2.vi ‏19 KB
tau_inn (SubVI).vi ‏16 KB
tau_ut (SubVI).vi ‏10 KB

Modifying the Ad-hoc Query Infoset : problem with P9105 fields.

Hi all,
Am having problem with Infoset of Ad-hoc Query .
i need to add the Critical role Field Group to ZHR_PA_01 Infoset of Satandard Area.
for this i have imported that Infotype 9105 and included the following standard fields by drag and drop.
                1. Role Category
                2. Role SubCategory
                3. Global Identifier
                4. Personnel Number
and then Saved and Generated the infoset succesfully.(No syntax errors)
But
While testing, using the T-Code: S_PH0_48000510
if i select one of these above fields for the report,
Am getting the message that "Error when generating the report".
Error Description:The report cannot be generated because the internal description is invalid or incomplete.
means what may be the problem.?
if i select other fields its working fine.
can any body explain me clearly..??
Regars,
Kalam A.

Hi Manoj,
yes, i have saved the T-code.and generated the Infoset Succesfully.
and its showing the those additional fields while testing.
for remaining fields its working fine.
but am not getting wats problem with the four fields of P9105 infotype.
could you please suggest me.?
Regards,
Kalam A.

Problem with add fields in KOB1

Hi,
I need to add some fields in the KOB1 report for Display Actual Cost Line Items for Orders, i have tried change the Customizing include CI_RKPOS with the new fields and the includes ZXKAEPTOP, ZXKAEPU01 from EXIT_SAPLKAEP_001. The problem is that the new fields are marked with 'X' in the fielcat-no_out and not appear in the report. How can i change this fieldcat or do that these fields appear in the report.
Thanks.

Hi,
do like this
1) there is a view covp go in to that open table/join tab COEP table in that one include is there CI_COBL
in this include put your custome fields.
and activate it.
2)open se37 tc and run this RS_SEL_OPTIONS fm and exe cute it click on creat button and you can able to give group no in the sceen with the fields which you need to display. then save it.
3) run kob1 you will get it

Problem with Date fields in Search panel

Hi all,
I use TP2 and in my jspx page I have a search panel with two date fields and table where the results is displayed. But there is a problem with these date fields, because when I search dates the results is nothing even I retype the date from table. Also I have other pages where this problem exist with same structure.
Could somebody help me with some advice?
Thanks in advance!

Hi Frank,
Thanks for the answer.
I use the standart method to make search panel with drag and drop the data control to the page. The other search panel fileds work fine, only the date fileds are problem. Maybe something in view object doesn't work properly.
Here I post the code from my page.
<table border="1" style="margin:5px;">
<tr>
<td>
<af:showDetailHeader text="ТЪРСЕНЕ" disclosed="true"
inlineStyle="width:780px;">
<table cellspacing="2" cellpadding="3" border="0">
<tr align="left">
<td align="right">
<af:outputLabel value="#{bindings.EGN.hints.label}"/>
</td>
<td align="left">
<af:inputText value="#{bindings.EGN.inputValue}"
label="#{bindings.EGN.hints.label}"
columns="#{bindings.EGN.hints.displayWidth}"
maximumLength="#{bindings.EGN.hints.precision}"
simple="true"/>
</td>
<td align="right">
<af:outputLabel value="#{bindings.LNC.hints.label}"/>
</td>
<td align="left">
<af:inputText value="#{bindings.LNC.inputValue}"
label="#{bindings.LNC.hints.label}"
columns="#{bindings.LNC.hints.displayWidth}"
maximumLength="#{bindings.LNC.hints.precision}"
simple="true"/>
</td>
<td align="right">
<af:outputLabel value="#{bindings.AccPersonID.hints.label}"/>
</td>
<td align="left">
<af:inputText value="#{bindings.AccPersonID.inputValue}"
label="#{bindings.AccPersonID.hints.label}"
columns="#{bindings.AccPersonID.hints.displayWidth}"
maximumLength="#{bindings.AccPersonID.hints.precision}"
simple="true"/>
</td>
</tr>
<tr align="left">
<td align="right">
<af:outputLabel value="#{bindings.PersonName.hints.label}"/>
</td>
<td align="left" colspan="5">
<af:inputText value="#{bindings.PersonName.inputValue}"
label="#{bindings.PersonName.hints.label}"
columns="#{bindings.PersonName.hints.displayWidth}"
maximumLength="#{bindings.PersonName.hints.precision}"
simple="true"/>
</td>
</tr>
<tr align="left">
<td align="right">
<af:outputLabel value="#{bindings.DateFrom.hints.label}"/>
</td>
<td align="left">
<af:inputDate value="#{bindings.DateFrom.inputValue}"
label="#{bindings.DateFrom.hints.label}"
simple="true">
<af:convertDateTime pattern="#{bindings.DateFrom.format}"/>
</af:inputDate>
</td>
<td align="right">
<af:outputLabel value="#{bindings.DateTo.hints.label}"/>
</td>
<td align="left">
<af:inputDate value="#{bindings.DateTo.inputValue}"
label="#{bindings.DateTo.hints.label}"
simple="true">
<af:convertDateTime pattern="#{bindings.DateTo.format}"/>
</af:inputDate>
</td>
</tr>
<tr>
<td align="right">
<af:commandButton actionListener="{bindings.Execute.execute}"
text="#{bundle.FindBtn_LABEL}"
disabled="#{!bindings.Execute.enabled}"
icon="/images/find.png"/>
</td>
<td align="left">
<af:commandButton text="#{bundle.FindClearBtn_LABEL}"
icon="/images/find_clear.png"
action="#{PeopleBean.onClearVCBtn}"/>
</td>
</tr>
</table>
</af:showDetailHeader>
</td>
</tr>
</table>
Also I have a result table for the search panel, but I don't believe the problem can be there because it works fine when I search in fields different by inputDate.
Do you have any suggestions?

Problem with Date-Field

Hi,
I have a problem with a date-field. Maybe I must describe the problem more detailled, but first I just want to ask you, if you know the following error-message: "21.10.2010 kommt nicht in der Menge der erlaubten Werte vor". I don't know the correct translation but it must be something like this: "21.10.2010 does not occur in the quantity of the permitted values". I don't find the position in the sourcecode of this message. And I know, that this message isn't thrown by a functionblock from SAP. So what is the describtion of this message?

Yes I have a date field in my form. Ok I must describe it more detailled. I have an employee searchfield. After select an employee you see a form. After filling the form you click on "Send". It creates a ticket and sends the data to the Backend and jumps back to the employee search field. Untill this point everything works fine. There is no problem with the datefield. Now I want to create the form. I choose an employee and fill the form. But now it comes this message. But not after clicking the "send" button. The message comes after changing some data (e.g. change a radio button). So it looks like a validationproblem, but only at the second creationprocess. Maybe the first date is in some cache? I don't know...

Problem with lenght of text and footer elements displaced (bug?)

I have a problem with the footer of my pages. The footer is composed with elements of the master page and two elements that are page dependant so these elements are defined in each page. All the elements in the footer are marked as page footer elements so they should appear below the main content of the page and all in the same position relative to each other.
But the truth is the main content extends below the top of the footer overlapping it and the page dependant elements of the footer are displaced in the same amount and so these elements do not match in the space reserved for them in the footer.
I think the problem is caused by the text box in the main content being displayed with a bigger height than it appears in the editor. Even worse: every web browser shows the text with a different height so the footer elements all appear displaced differently. I have tried to define the height of the text in pixels (px) instead of percentage (%) but the result is the same. But even with this indetermination, the footer should always appear below the main content and not overlaping (or overlaped) by it, so either this is a bug or I am doing something wrong.
Here is how i see the page in the editor. The grayed out keywords and the "UK Photographers" link of the footer are in the current page. All other elements of the footer (horizontal line(rectangle of 1px height), "facebook - links - contact" links and Copyright notice) are in the master page:
This is how the page appears in Firefox 15 with the text zoom set to default. notice how the footer elements that are defined in the current page appear overlaping those defined in the master page (there should be a 27px space between the end of the text and the horizontal line) and moved down in the same amount than the main content exceeds the footer limit:

I am able to repro this on my end as well. Seems like a bug that we will be fixing in a future release.
Work around would be to make sure that the footer item on the individual pages are above the ones from the master page or put everything on the master page or the individual page.
- Abhishek Maurya

Smartform: Formatting Problem with QUAN-Field

I want to print a smartform and get exception 1 (formatting error). With function SSF_READ_ERRORS I get an error table. There is on entry: errnumber = 020011, msgid = SSFCOMPOSER, msgty = E, msgno = 601, msgv1 = wa_outtab-menge.
It seems to be a formatting problem with field WA_OUTTAB-MENGE. But in the structure this field is referenced correctly.
Does anybody know a solution?

I solve this kind of problem in my SmartForm.
Try this:
Go to "Global Definitions" Node, then "Current/Quant.Fields" tab and set these values:
Field Name: WA_OUTTAB-MENGE
Reference Field: WA_OUTTAB-MEINS
Data Type: QUAN
Best Regards,
Eduardo Ribeiro.

Problem with decimal fields using BADI For PD Infotypes

Hi,
I'm implementing BADI HRBAS00INFTY.
For reading the fields of infotype , I'm using the substring
of the field NEW_INNNN-VDATA .
I have a problem with fields of type DEC.
In field NEW_INNNN-VDATA it looks like this : '####'
I believe that the possible reason for this is conversion from DEC to CHAR
But I don't know how to fix it.
Thank you .
Message was edited by: Alon Lozinsky

Hi Alon,
We had same issue. Use following code.
data: hri1011_str type hri1011.
move new_innnn-vdata to hri1011_str.
HRI1011_STR fields will have decimal values.
Let me know if you still have any issues. If solution works, kindly do Point Recognition.
-Bharat

Problem with the query in group by clause

hi, i have problem with group by clause, can some one please help me.
select
header_id,
(select sum(nvl(dr,0) - nvl(cr ,0)) from temp_tab a1
where
a1.country=a.country
and a1.source='AP'
and a1.header_id=a.header_id) WHT,
sum(dr),
sum(cr) from temp_tab a
group by header_id,
(select sum(nvl(dr,0) - nvl(cr ,0)) from temp_tab a1
where
a1.country=a.country
and a1.source='AP'
and a1.header_id=a.header_id)
select * from temp_tab
drop table temp_tab
create table temp_tab(header_id number ,line_num number, country varchar2(2),
source varchar2(2), dr number, cr number,primary key(header_id,line_num));
insert into temp_tab(header_id, line_num,country, source, dr,cr) values(1, 1,'NL','AP',100,20);
insert into temp_tab(header_id, line_num,country, source, dr,cr) values(1, 2,'PO','AP',20,20);
insert into temp_tab(header_id, line_num,country, source, dr,cr) values(1, 3,'NL','AP',70,20);
insert into temp_tab(header_id, line_num,country, source, dr,cr) values(2, 1,'NL','PA',100,20);
insert into temp_tab(header_id, line_num,country, source, dr,cr) values(2, 2,'NL','PA',100,20);
insert into temp_tab(header_id, line_num,country, source, dr,cr) values(3, 1,'KR','PO',100,20);
commit;
Appreciate your help.
Thanks,

select header_id,
         (select sum(nvl(dr,0) - nvl(cr ,0)) from temp_tab a1
         where a1.country=a.country
         and a1.source='AP'
         and a1.header_id=a.header_id) WHT,
         sum(dr),
         sum(cr)
from temp_tab a
group by header_id
,countryIt's kinda hard to follow what your query does... maybe because I'm only at my second coffee..
Edited by: Alex Nuijten on Oct 2, 2009 8:07 AM

Problem with number field

Hi,
I'm using ADO (Oracle Provider for OLEDB) to connect Oracle 9. If the type of any field in table is Number(9) and I open query with this field, all negative values are displayed as positive values. For example: If I write -1 value to this field and then post the dataSet (Delphi7 - TADOQuery) value is refreshed to 1. Real value in database is -1.
Could anybody help me with this problem?
Regards Jan.

Once again :)
I finally foud out that Deplhi does support (varDecimal), but delphi TCustomADODataSet (ADO recordSet wrapper) component incorrecltly treats such field type. It regards Decimal(<9,0) as integer (TIntegerField) but when it gets value from underlying ADO recordset it expects integer variant. So it's delphi problem. I hat to fix this problem in source code of this component.
Regards Jan.

Problems with summary field in group footer

Similar Messages

Maybe you are looking for