Process Observer: Process Status shows as "Running" although End task was reached

Hi,
This is our first Process Observer implementation. I'm using a custom BOR object to track an end to end process.
My Activities begin with the receipt of new or updated data from an external system and ends with a Goods Issue / Receipt Document Create.
Information Rec'd from external application
STO / PO / SO (or any combination) created
Possible Updates to STO / PO / SO
Inbound or Outbound Delivery Document Created
Goods Issue or Receipt Document Created
I've assigned #1 as the Start and #5 as the End of the process.
I've been testing and the POC_MONITOR is picking up the Starting Tasks great!
However, I have some processes that should have been put in a Completed Status since they've hit their Ending Task. In this case, it was a Goods Issue.
But, if you notice, it's still in "Running" status.
How do I get this process to "Complete"?
Thanks,
Robert.

solved in the Process Observer discussion forum:
http://scn.sap.com/message/15360006#15360006

Similar Messages

Resource Status shows as provisioned even when task is rejected

Hi,
We have 5 tasks for resource provisioning. The last task gets rejected but still the Resource Status shows as Provisioned instead of Provisioning.
In each and every task, I have mapped the response as below:
C- Provisioned
R-Provisioning
Please let me know if I am missing anything.
Thanks.
Edited by: user11957197 on 24 Oct, 2012 4:22 AM
Edited by: user11957197 on 24 Oct, 2012 4:22 AM

Hi Kalpna,
Once the the task status in 'Provisioned' status it can't be changed into 'Provisioning' status. It can be either 'Revoked' or Enabled/Disabled.
Above is product limitation.
In your case I guess you have set status on 'Create User' task and this task might successfully completed that's why the resource object status is 'Provisioned'.
Now may you have multiple task after create user. which may fails but as the resource status is in 'Provisioned'. It can't be changed to Provisioning.
This is right as well. Because the account is created at target system no matter some update fails.
However, if you want to set status based on last task satus. you can do as suggested above.But, You can ignore if your case match with my understanding.
--nayan

Process chain shows DTP running

We are on latest patch levels in BI 7.0.
One of our production process chain is not completing. It shows no messages, DTP from DSO to cube remains yellow. We don't see any request updating in the cube. However, manual execution of DTP is working fine.
I have dependent process chains, and I need to make this process chain green.
Please help
Shalini.

Hi Shalini,
Some patch is missed in production system i guess.
Could you please cancel the DTP that is currently running in the
System and restart it again. Before restarting the DTP please make
sure that the lock from the DDFTX and NRIV tables have been released.
Please ask the database administrator to ensure that there are no
locks on the database on these tables before starting the DTP again.
The issue with the lock on the DDFTX table usually happens when an
upgrade is done and on restarting it the issue should not occur again.
Could you please implement note 1155807. This note should prevent the
locking on the DDFTX table
Hope it helps you.
Thanks,
Sarau

Request showing still running in Monitor after request status is made red

Hi All,
We have a delta load running from an ODS1 to 3 Targets - Cube1, ODS3 and ODS4 through a single delta infopackage. For handling a production data failure, we had to delete the data from these 3 Targets along with the inits. Afterwards we again started the init with data transfer for all the 3 targets simultaneously. The load failed due to processing overdue. Again the inits were deleted for all the requests but during the next day loading we suddenly found the same requests in the 3 Targets with yellow status showing as running. These requests were already changed to red in QM status and the inits were deleted. But can anybody explain how come they again reappeared ?
This question is really intriguing.
Thanks
Somnath.

Hello somnath,
those request are submitted to batch, and they are still alive somehow even if you delete those requests or change them to red. And again tries to load data to providers and if no request available creates new ones.
What can you do?
1. Try to delete those jobs from the queue.(It's not possible for every request unforntunately)
2. Delete the content of provider by using right click on the provider and choose delete data.
Sarhan.

How to stop the process chain showing status as yellow but no process step

Dear Friends,
How to stop the process chain showing status as yellow but no process step is running in that process chain.
We have manually triggered the process chain for sales it finished successfully till load data but the next step is create index and DB statistics. Both of this steps are in unscheduled position only and no background job for this.
Please guide me.
Thanking you in advance.
Regards,
Shubhangi

Hi,
At times even I have faced this situation. During those times, running the Function module RSPC_PROCESS_FINISH by passing the right parameters came to my rescue.
Regards,
Raj

Process Request shows status of 'INITIATED' or 'PROCESSING' but no longer r

Hi,
Received the below error when I try to run the cobol sample program.
Process Request shows status of 'INITIATED' or 'PROCESSING' but no longer running
Any help on this is highly appreciated.
Thanks
Soundappn

Is there something in stderr/stdout ?
You could have a look to that About the template FSCM9.1 FP2 Peopletools 8.52.03 (v4 - July 2012) (part 2) and see if something can help you out.
Nicolas.

Sale order status showing being processed

Dear Friends,
I am working in SAP ECC 6.0
My sale order Qty is 10 pcs eing processed
and delivery qty is 10 pcs - Completed
Good Issue - 10 Pcs - Completed
Invoice - 10 Pcs - Completed
In spite of carrying out full delivery sale order status is still showing being processed.
is there any configuration missing or is there any program to update the status.
Kindly advice.
Satish

Hi Ankur,
2 Doubts i have:
1)
In our case for the Item Category we have not maintained anything in Completion Rule however we have maintained Update Document Flow in Order to Delivery Copy Control.
Our Document status shows as Completed in this case as well. Hence i do not know the Significance of maintaining Completion rule in item category.
2) I have a order type which has Order Relevant Billing. The Copy Control for Order to Billing does not have any Update Document Flow Check Box. We are using a Service Material in this Order Type.
After creating the Billing we still have Order status as Being Processed.
Can you help in finding a solution to the above?
Madhukar

Sales Order Status showing Being Processed

Hi All ,
I my client created sales order with 100000.700 ton and with 42 Piratical delivery document with different dates and 42 billing document and clear accounting documents
But the problem is Sales order status showing as Being Processed
I check all delivery documents if was showing total quantity delivers and i check copy controls OR to ZLF Updated document flow is there
and i Item category TAN don't not having completion rule
My question is it is mandatory to maintain Completion rule in item category
The Problem With Only One sales order it showing Being Processed, rest of sales document Showing completed
Do we need to Updated Status manually ?
Can any one guide me what could be a Problem
Thanks
Rajesh

Hi,
GO TO VA02 THEN SELECT THE ITEM THEN GO TO SCHEDULE LINE -> STATUS TAB-> GIVE THE REASON FOR REJECTION
Regards,
T.Murugu

Process is always in Processing Status

Hello
i created the UDT2UDT scenario as the official document
but always it appears in processing status
is there any missing config?
how can i nresolve it?

I found that my messages would hang forever in "Processing" if there was an error in the XSL.
The way I finally figured this out was to go to the technical error monitor in the B1iP dashboard (NOT the B1iSN one). I can't remember the exact path but there's a monitoring section there with two subsections of Event monitor and technical error monitor.
When I opened the technical error monitor I could see a German error message (although I was working in English) that began something like "Die formatvorlage.." Google translate told me it basically said the transformation could not be completed.
If you are using XMLSpy, it has the ability to test your XSL by passing it the B1i message (even the one stuck in processing, as it already contains the sender payload) through it and showing you the result.

'Print Preview' in Me22n/23n and thru ME9F and PROCESSING STATUS

Hi ,
We are taking print of Purchase Order thru "Print Preview" button available in ME22N / ME23N.
Although the print out is perfect but system is not changing the processing STATUS of message 'output type'.The status remains YELLOW ( processing program has not started yet).
While If I take the print of same purchase order thru ME9F , we are getting the same Print and the status of output type also gets changed to Green " Processed Sucessfully".
Could u pls let me know what is issue at my end.
Regards
Shrey

Dear,
The system always creates a new version when the purchasing document has reached a final state.
This means one of the following processing states:
● Active
If you do not use the document release functionality
● Release completed
If you use the document release functionality
For a new version of a purchasing document to be created, all messages must have also been transmitted.
No new versions are generated for purchase orders that are on hold.
Not every change to an external purchasing document results in a new version. The following changes lead to a new version:
● All print-relevant changes
You define which changes are print-relevant in Customizing for Purchasing under Messages ® Fields Relevant to Printouts of Changes.
● Changes in document assignment
● Changes in address
Address changes result in a new version only if the field ADRC-NAME1 has been defined as a field that is relevant to printouts of changes.
● Changes to master conditions
Changes in master conditions result in a new version only if the field EKPO-NETPR has been defined as a field that is relevant to printouts of changes.
Version Data
You will find the version data:
● In the item details on the Versions tab page in Enjoy purchase requisitions (ME51N, ME52N, ME53N)
● In the header data on the Versions tab page of Enjoy purchase orders (ME21N, ME22N, ME23N)
● Under Header ® Versions in RFQs, conventional purchase orders (ME21, ME22, ME23), contracts, and scheduling agreements.
There you can maintain version data (e.g. reason for change) and complete the version. In addition, the Value change field shows you whether and to what extent the value of a requisition or external purchasing document item has changed in comparison with the previous version.
You can display the change documents for one or more versions by selecting the relevant versions and choosing Display Changes.
Please check accordingly.
Regards,
Rahul.

Workitem stunned in 'in process' status

Hi Export,
I met a workflow problem in CRM.
This workflow is for DPA approval.
It generate a workflow in CRM, then trigger another workflow for approval in R/3.
After approval completed in R/3, it call back to CRM, and then CRM update status and condition in DPA.
Most of the workflow run correctly. But sometimes workflow met problem in step of update DPA. This background step stunned in 'In Process' status and will not change to complete status.
I have to use tcode: SWPC for this workitem, and it can be found in this transaction. I need to click continue process and then this step can continue running.
I checked workflow log and there is no any error message, all workitem status show green.
Why it happen,and is there a method to fix this problem?
Thanks.
Peter

Hi Prasath,
Thanks for your help.
I checked ST22, and found below error.
WF-BATCH UNCAUGHT_EXCEPTION CX_OS_OBJECT_NOT_FOUND
Description of this error is:
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_OS_OBJECT_NOT_FOUND', was
neither
caught nor passed along using a RAISING clause, in the procedure
"IF_MERGE_PPF~MERGE" "(METHOD)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
Could not find the referenced object with the OID
"00000000000000000000000000000000" (instance GUID) and
"37AF698827994D45E10000009B38F9B7" (class GUID)
Do you have any idea about this?
Thanks
Peter

How to see OBIEE processes status using OPMN

Hi All,
I installed obiee 11g on windows server 2003 64 bit, all my processes are up and running as I look into the Fusion middleware console. I was trying to see the status through OPMN. I tried access the opmn by going into the folder
Middlewarehome\instances\instance1\bin
I double clicked opmnctl windows batch file but nothing comes on the screen. I don't see any black window coming up and showing me the status of all the obiee processes running, I notice that clicking opmnctl launches a black window but it goes away within seconds ?
Can anybody please tell me how to see my system components using opmnctl?
Thanks,
Ronny

Hi,
Try to run CMD prompt and change the Drive to opmn and run the command like this,
D:\Oracle\Middleware\instances\instance1\bin>opmnctl status
For more refer below section,
4.5.1 Using the OPMN Command Line to Start, Stop, Restart, and View the Status of System Components
http://docs.oracle.com/cd/E23943_01/bi.1111/e10541/components.htm#BIESG486
also u can check the status via Weblogic EM
Thanks
Deva

Any script included in the system to check all major processes/status?

Hi,
I have ebs R12.1.1 running, and I have a question regarding to the script availability.
For example, I can see that there are several scripts for each services controls under $INST_TOP/admin/scripts like adopmnctl.sh, concurrent manager, apps listener, web server, form server and other scripts...
But, is there any script which lists more on system status of major services with one command?
adopmnctl.sh shows 4 services like OC4J related and HTTP server.
But, I expected a bit longer list. :) And I also heard there was such a script in 11i....
Does anyone know about it?
Thanks,
SH

All the scripts can be found under the same directory mentioned above by you.
Not sure what other major processes/status you are looking, so please elaborate more.
You may also see these docs.
Maintaining Oracle Applications Documentation Set
http://download.oracle.com/docs/cd/B53825_03/current/html/docset.html
Script to find Apache, Java, JRE, Forms version for Oracle E-Business Suite R12 [ID 468311.1]
Thanks,
Hussein

Processing Status on Sales Order

I am configuring in SAP R/3 a Free Third Party Sales Order . . . The problem I am having is with the Processing Status area . . . specifically the Overall Status for the Header and the Item. With the new set up neither of those fields show on the sales order, and so the order does not show up on VA05 as open when first entered. What would need to be done in configuration for these fields to be on the sales order, and to show the appropriate status?
Update . . . The only way so far I have found to have these fields show on the sales order is by using the Completion on the item category, but from what I am reading it is not the suggested way to do it, yet the only way so far to get it on there. And, the problem here is when in MIRO the PO on the Free Third Party Order, it does not complete the Sales Order Header or Item, so I still am unable to get the status to change.
Any ideas?
Edited by: Diane Thacker on Aug 4, 2009 9:41 PM

Hi,
Per standard process, the sales process will not complete unless the billing has been done for the sales order.
What this means is once MIRO is done, the sales order is eligible for billing. You must complete the billing, so that the sales order wont appear in the VA05 list. Until billing is completed, the sales order status remains open.
Regards

HOW TO STOP THE PROCESS CHAIN WHICH IS RUNNING IN THE PRODUCTION?

HI ALL,
CAN ANYONE TELL ME HOW TO STOP THE PROCESS CHAIN WHICH IS RUNNING DAILY AT 5.00 PM. I NEED TO STOP THE PROCESS CHAIN FOR COUPLE OF DAYS AND THEN RESTART IT AGAIN.
cAN ANYONE TELL ME THE PROCEDURE TO STOP THE ENTIRE PROCESS CHAIN RUNNING IN THE PRODUCTION.
THANKS
HARITHA

Hi,
First and foremost let me advice you to be very careful while doing this.
For Rescheduling
RSPC> chain > Goto > Planning view and
click on Execution tab > select > Remove from Schedule and then in Maintain variant of start process reschedule for the day you require it to run.
For terminating active chain
You can start from SM37, find the process WID/PID then go to SM50 or SM51 and kill it. Once its done come back to RSMO and check the request, it should be red but again manually force to red and save by clicking on the total status button in the status tab. This shuld ensure that the process is killed properly.
The next step will be to go to targets that you were loading and remove the red requests from those targets.
Note: For source system loads you may have to check if the request is running in the source system and kill if needed and pull it again.
But for BW datamart delta loads u may have reset the datamarts in case u are going to pull the delta again.
Re: Kill a Job
Re: Killing a process chain.
Regards,
JituK

Process Observer: Process Status shows as "Running" although End task was reached

Similar Messages

Maybe you are looking for