Process Order against Sales order

Hi guys
How to create Process order against Sales order...
In Disc mfg by using co08 we create Production order against sales order like wise i want to create Process order..
Regards,
Srihari.

Hi
I know creation of of Process order with reference to Planned order and assigning Sales order in Md11
I am looking for Create process order wrt sales order like Co08..
Regards,
srihari

Similar Messages

Purchase Order against Sales Order

Hi Experts,
It could be possible to prepare purchase order against sales order in which the data of sales order could be pulled in purchase order. Please help me in this matter.

Hi Shailesh......
Off course it is possible. All you need to do s Open Sales Order and go to Logistic Tab and while creating Sales Order ctick on Split Purchase Order and the moment you add the Sales Order it will Pop up the Purchase Order creation window where you need to fill the details and add PO and then add Sales Order.
But if you have defined Preferred Vendors in Item Master Data then while autocreation of PO by this way will take its Preferred vendors automatically.......
Regards,
Rahul

Reg.Purchase order against sale order( E )

Dear Experts
I configured PO against cost centre (K - Cost center and G/L A/c is created) and it is working.But I want to configure against sale order (E).what is the configuration required. Pls advise in details
Thanks
Rajakumar.K

Dear Raja,
Third-party order processing (for direct-to-customer delivery/drop shipment) is triggered when a sales order containing a third-party item is created.
When this occurs, the system automatically generates a purchase requisition item of the category u201Cthird-partyu201D for each delivery schedule line of the sales order item.
This requisition item is converted into a purchase order (PO) item. Depending on the confirmation control key, the quantities/dates in the sales order are confirmed when the PO is created or an order acknowledgment is maintained.
If you create a third-party item without referencing a requisition generated from a sales order, this is not third-party order processing in the foregoing sense: a matching-up of the data between the SD sales order and the purchase order cannot be carried out in such cases!
Sales Order
In the standard system, the sales order item for the third-party process has the item category TAS (this is found automatically if the item category group BANS has been set in the material master, or it can be changed manually). In the standard system, the schedule line category CS is found for the item category TAS. It is specified in Customizing for the schedule line category CS that a purchase requisition (type NB) with the item category '5' (third-party) and account assignment category 'X' is generated.
The number of the requisition that is generated can be displayed via the delivery schedule lines in procurement.
If a PO is generated from this requisition, it can be seen in the document flow for the SD sales order (Environment  Document flow).
Purchase Requisition
The requisition is generated via the function module ME_REQUISITION_EXT. An important characteristic is that the field EBAN-ESTKZ (creation indicator) contains a 'V'. If a third-party requisition is created in dialog mode, this field does not contain the indicator u2018Vu2019 u2013 that is to say, this is not a third-party process in the sense defined. A source determination process is carried out at the time of creation. The purchase order units found during this process are adopted! The account assignment, containing the number, item, and schedule line of the sales order, cannot be changed in the requisition. The account assignment is the u2018pointeru2019 between the requisition and the SD order!! Since Release 4.6, the delivery address cannot be changed either. The address of the goods recipient (ship-to party) from the SD order is adopted as the delivery address (caution: this can be located both at header and item level in the SD order).
There is a requisition item for each delivery schedule line in the sales order!
Purchase Order
Purchase order items generated from the above requisitions contain EKPO-STATU = 'V'. The delivery address comes directly from the sales order (see LMEPOF3T MEPO_ITEM_FILL_ADDR) and cannot be changed. Neither can the account assignment be changed; here too it is the 'pointeru2019 between the PO and the sales order. In the standard system, the account assignment category is 'X', with KZVBR = ' '. Since the account assignment is located at item level, you must not convert several third-party requisitions into a single PO item, otherwise the update of the sales order is liable to fail!
An 'actual' goods receipt does not take place with regard to a third-party item. The 'WEPOS' indicator is not set for the item categories 'S', but can be set manually. The posting of a GR results merely in a value update here. The entry of a vendor invoice can be made dependent on the prior entry of a GR. In the third-party process, this only makes sense if you wish to prevent the customer from receiving an invoice before having received the goods. A goods receipt should be recorded when the vendor reports the outward delivery.
At the time of saving, the document flow and confirmations are updated in the SD order. If problems should arise on the SD side due to changes (e.g. the customer has been blocked), an error message is issued here first!
In the case of third-party items generated without reference to a 'third-party requisition', i.e. the item category u2018Su2019 is merely entered manually, there can be no update between SD order and purchase order. Here, for example, the delivery address is not read from the sales order u2013 it must be entered manually (mandatory field).
Sanjeev

Reg.Purchase order against Sale order.

Dear Experts
I have configured newly in our Ides system for A/c assignment "K", and I want to configure against sale order " E ", what are the settings to be done. Plaase help.
Thanks
Rajakumar.K

Dear Experts
VA02 ->enter sale order -> press enter.. the following error occured
" Field VBAP NTGEW is not defined in incompletion procedure 20 "
" Field VBAP BRGEW is not defined in incompletion procedure 20 "
Error 2nd :
Subs.function purchase requisition from sales document not possible: Item 000002 is not completely configured.
how to solve this problem.
Thanks
Rajkumar.K
Edited by: Raja Kumar on Oct 3, 2008 9:21 AM

Create process order against sale order

Hi Guru
Mu client want to make process oder with respect to sale order means MTO Strategy.
Sp wht r hte necessary config require to give require out to our client.
Please Explain with example or send me doc if any to my mail ID.
My ID :- [email protected]
PArminder

Parminder,
Before deciding the strategy make sure whether it is pure Make to Order or not
What i mean by pure Make to Order is all activities(Procurement/Prodcution) will start only after the receipt of the sale order
If this is the case then you can go for planning strategy-20,you need to maintain this strategy only at the FG(Finished Good) level
If this is not the case then you can go for combination of Make to stock & make to order like 40 or 60
For more information on the strategies visit this help link
http://help.sap.com/saphelp_47x200/helpdata/en/1d/23da03be3c11d1b54f0000e82de178/frameset.htm
Hope this is useful
Revert back if you have any further queries
Reward points if useful
Regards,
SVP

Reg. Purchase order against sales order E & L combination

Dear Experts
In our company we create Sales order - Purchase requistion-Create purchase order - Grn
in the above flow. we are doing subcontracting with outside vendors, for that we are raising process order (ME21N - In Account assignment - Sales order number is assigned)
For the above how to configure in SPRO, what are steps. pls advise.
Thanks
Rajakumar

Hi,
Instead of Account Assignment Category "E", try it with "M" and check, it should pick up Stock Account instead of Consumption. And follow the below process, there is not any configuration for this.
Config: - SPRO > MM > Purchasing > Account Assignment > Define Combination of Item Categories/Account Assignment Categories > Here maintain combination of "M" and "L" if required.
Subcontracting for Sales Order Stock: -
Purpose: - Subcontracting is also possible in conjunction with sales order stocks. The subcontracting orders are account-assigned to a sales order. Thus, the components are not transferred (using a transfer posting) to the "stock of material provided to vendor" but are directly withdrawn from the sales order stock the time of the goods receipt. The material manufactured is also posted to the sales order stock.
The cost of subcontracting is then debited to the sales order.
Since the components are not transferred to the "stock of material provided to vendor", it is recommend that you use a transfer posting to transfer the provided components to a new storage location (for example, 9999). This enables you to obtain an overview of those stocks that are physically located at the subcontractor. This information is particularly important when you carry out a physical inventory of the sales order stocks.
Features: -
Withdrawal from Stock of Mat. Provided or Sales Order: -
For components that are managed in sales order stock, you can define whether the components are to be withdrawn directly from each sales order or from the stock of material provided to vendor. You manage this via the dependent requirements indicator for individual customer requirements and collective requirements (MARC-SBDKZ).
You can maintain this indicator in the following places:
In the MRP view of the material master record (MRP 4)
In the explosion types for the BOM item (in Customizing for Production in the step Basic Data -> Bill of Material -> Item Data -> Define explosion types )
Configuring the explosion types has priority over the configuration in Inventory Management.
If the indicator is set at Collective requirements only (2), the materials are withdrawn from the stock of material provided to vendor. If this indicator is set any other way, the system withdraws materials from sales order stock.

How can we delete the production order against sales order

Dear All
i

Dear Gopi,
In CO02, go to functions tab and select deletion flag active and save the PO. Once you activate the deletion flag GI, release and operation confirmation will be deactivated.
See below link to get more understanding.
Delete Production Order from CO02
Regards / US

TCODE for Process order creation against Sales order

Hi gurus,
Pls tell me what is the TCODE for Process order creation against Sales order
Eg. CO07 is for production order from sales orde

Typically, in MTO scenario after the sales order is created you run MRP which will create planned order and then you convert that into production order using MD04.
Or if you have SD settings correctly directly from the release of Sales Order it will create planned order or production order.
please check and revert back.

Third party process with Valuated sales order stock

Hi All,
We have third party sales order process with valuated sales order stock. The problem is that in the theird party PR which is triggered directly from the sales order it determines a stock account which is assigned to the BSX key in OBYC.
But since this is third party processing as per my understanding a consumption account assigned to key GBB-VAX (since account assignmnt category is X) should get determined, so that when the GR is done against the PO a consumption posting is done in the background.
I am not able to understand if the system is determining the stock account due to the fact that it is valuated sales order stock and if so, what should happen after GR. Should we have a stock created for the material which is physically directly delivered to the customer?
Regards,
V S

Hi,
Check GBB-VKA which is defined in OME9 for your ''E'' Account Assignment Category that SAP will debit upon GR posting
Also check "X" GBB-VAX and the G/L account assignment in OBYC
The posting on GR should be debit KBS -Credit GR-IR
Thanks
Diwakar

Reg.Purchase against sale order

Dear Friends
Anybody have idea regarding purchase material against sale order and that will be kept as stock.
As and when it is used according to the requirement. The procurement should be posted to stock account in purchase order itself. how to do it. pls help me.
Thanks
Rajakumar.K

Dear ,
i thinck ur company using trading business
based on sales order u can create PO with account assignment E Sales order , system will asl sales order number in account assignment data at item detail level.
the process will be
Pre-shipment Shipment Procedure :
1) create a sales order
2) create PO with account assignment E where system will ask for sales order number
3)delivery with vl10n
3) preshipment invoice-VF01
POST-SHIPMENT Procedure:
1) do the GR the stock will be invetorized for ur sales order
2)invoice verification MIRO
3)Final Delivery: vl02 u have to change the intial delivery
4)Final (Post-Shipment) Invoice: VF01
work with ur FI consultant for G/L accounts
Regards
venu gopal
Edited by: venu kk on May 19, 2009 6:36 AM

Plant to plant subcontracting against sales order

hi
my scenario is like this
two plants A and B under one company code, its repair scenario in this sales order come in plant b ,in this repairing we have 5 process out of which one process has to be carried out in plant 1,so for that we will do subcontracting against that sales order with plant b. so how to handle subcontracting with plant a against sales order.
Edited by: AMIT RANE on Mar 4, 2009 7:55 AM

Purpose: - Subcontracting is also possible in conjunction with sales order The subcontracting orders are account-assigned to a slaes order . Thus, the components are not transferred (using a transfer posting) to the "stock of material provided to vendor" but are directly withdrawn from the sales order stock the time of the goods receipt. The material manufactured is also posted to the SO
The cost of subcontracting is then debited to the SO.
Since the components are not transferred to the "stock of material provided to vendor", it is recommended that you use a transfer posting to transfer the provided components to a new storage location (for example, 9999). This enables you to obtain an overview of those stocks that are physically located at the subcontractor. This information is particularly important when you carry out a physical inventory of the Project stocks.
Features: -
Withdrawal from Stock of Mat. Provided for Project: -
For components that are managed in Project stock, you can define whether the components are to be withdrawn directly from each Project or from the stock of material provided to vendor. You manage this via the dependent requirements indicator for individual customer requirements and collective requirements (MARC-SBDKZ).
You can maintain this indicator in the following places:
In the MRP view of the material master record (MRP 4)
In the explosion types for the BOM item (in Customizing for Production in the step Basic Data -> Bill of Material -> Item Data -> Define explosion types)
Configuring the explosion types has priority over the configuration in Inventory Management.
If the indicator is set at Collective requirements only (2), the materials are withdrawn from the stock of material provided to vendor. If this indicator is set any other way, the system withdraws materials from Project stock.
Regarding Subcontracting Challan: -
Go to OMJJ, select the field "movement type" and press enter
Enter movement type "311" and double click on "Field selection (Enjoy)" under Dialog Structure on left side.
here "New Entries" and add field "LIFNR" (Vendor- plant as vendor )
Now in MIGO, at the time of transfer posting of components using movement type "311 E", specify the vendor code of the Subcontracting PO (i.e. Subcontractor)
Now create Subcontracting Challan in J1IF01 for material document of 311 E movement type.
Also check in SPRO > Logistics - General > Tax on Goods Movements > India > Business Transactions > Subcontracting > Maintain Movement Type Groups > here for Movement Type Group "0001", Movement Type "311 E" should be maintained.
Then do GR against PO and refer the Subcontracting Challan here.
And then do reconciliation in J1IFQ for the GR Document against Subcontracting Challan.
Also check in SPRO > Logistics - General > Tax on Goods Movements > India > Business Transactions > Subcontracting > Maintain Movement Type Groups > here for Movement Type Group "0002", Movement Type "543 E" should be maintained.
Follow the below mentioned process;
Process Steps: -
1. OX09 - Create Storage Location as "9999" for Subcontractor Location
2. MB1B - Do Transfer Posting of material from RM Warehouse to this Storage Location via movement type "311 E" (Instead of doing 541)
3. Now go to J1IF01 - here use material document of movement type "311 E" and create Subcontracting challan. (If required)
Prerequisite: - In SPRO > Logistics - General > Tax on Goods Movements > India > Business Transactions > Subcontracting > Maintain Movement Type Groups > Here for Movement Type Group "0001" (For issues), maintain movement type "311 E" also along with 541.
Rest all; refer subcontracting challan during GR and then reconciliation and completion, etc... Will be same as usual.
Note: - At the time of GR, consume components from storage location "9999" (for 543 movement type)
regards
KI

STOCK RESERVATION AGAINST SALES ORDER IN MAKE TO STOCK SCEANRIO

Presently in our system stock is get blocked or reserved against Sales order in MAKE TO STOCK sceanrio.
Now we required to remove the stock resrvation against sales order,where we have to make the changes in SPRO?
Please specify.
regards,
NITIN

Hi Nitin
Try with MB1B movement type 411 E
This will pull back from the sales order reserved stocks back to unrestricted
I dont understand your comments of how the MAKE to STOCK process is getting reserved for sales orders automatically
somebody has to make atleast a sales order to reserve ?is it so?
Or somebody is saving a sales order and saving delivery too without PGI?
In OVZ9 for your combination (checking rule A and checking group pf your material as maintained in MMR) you can remove the tick from the check box of include sales requirements
Regards
Raja

Incoming payments against sales order

Hi Experts,
Our client has a new requirement.
They need a new program to process incoming payments against sales order.
They need sales order included in additional selection of F-28 tcode, and clear payments against sales orders.
Could you please guide what all changes required? I have searched on the portal but didn't find any results.
Thanks

Hi Juliya
I would suggest to copy the Sales Order No in one of the reference field (Ref 1, Ref 2 or Ref3) through an exit at the time of Billing (Assumption is that one billing document will always have one sales order only). You can use the exit EXIT_SAPLV60B_008. This will be triggered when the SD Invoice is transferred to Accounting.
Now you can use F-28 or any custom program for clearing based on these fields.
Additionally make sure that the field you are using is not changeble after a posting has been done, You can control this through configuration. Let me know if you need any further inputs.
Thanks & regards
Sanil Bhandari

Manual Creation of PO against Against Sales Order AAC - M

Dear Gurus ,
I am facing issue that , as in MTO scenario some of the components in my BOM material is not fixed and they can be known after some time like labels of finish goods , now i want to create Manual PO with reference to sale order AAC is M , but i found that when MRP is creating purchase requisition , G/L account in acc. ***. tab is stock G/L , but when i am creating manual PO it is taking G/L from GBB Acct modification VKA (account as in acc. assignment cat. is M.)
But I want it should take G/L from BSX as it is taking in case of MRP generated PR against same sales order.
Thanks & Regards,
Akshay

Dear Sir ,
As here we are taking valuated stock against sale order , we are using account assignment category M and requirement class with valuation M and account assignment category M , as per bellow link.......
Valuated Sales Order Stock Configuration - ERP Financials - SCN Wiki
now i am facing problem , when MRP is creating purchase requisition , G/L account in acc. assignmrnt. tab is stock G/L from BSX which is right , but when i am creating manual PO with respect to same sales order , it is taking G/L from GBB Acct modification VKA (account as in acc. assignment cat. is M.)
But I want it should take G/L from BSX because stock is valuated stock.
Thanks & Regards,
Akshay

Account Assignment Error When Posting GI Against Sales Order

Hello SAP Experts,
We are currently experiencing a problem during goods issueance against sales order (VL02N). The system terminates the issueance and gives error:
"Account XXXXXX requires an assignment to a CO object".
We have tried maintaining the GL account in OKB9 and assign a default profit center there but i didn't work. The material master also contains the profit center. We were only able to post the transaction if we try to default the a cost center in FS00. However we dont want to assign a default cost center as cost centers differ by plant. We are wondering why it asks the cost center considering that it already contains the sales order assignment. We checked the field selection of the GL account, movement type and even the posting key and all showed that the cost center is not required. We are now in a dead end situation here. Please please help us.
Thanks in advance!

Hello Praveen,
Thank you for your immediate response.
What confuses me is the fact that it asks for a CO element when in fact it is already assigned to one (it is goods issuance against sales order). Do you know why is the system behaving that way?
Thanks!.

Process Order against Sales order

Similar Messages

Maybe you are looking for