Process Version 2012 - LR5

Button in the lower-right corner of the photo to update to Current Process 2012 is gone in LR5?

Thank you very much for your kind and insightful response.
Could you help me with this other question:
I noticed a odd behavior with regard photos imported em February 2013 with
previous version or LR4:
•             photos already adjusted have a new history step line: "From
Metadata";
•             photos not yet adjusted have the new history step line "Reset
Settings" after the "import (dd-mm-yy hh:mm:ss)".
Thanks in advance for your help.
Daniel Bastos
2013/8/24 ssprengel <[email protected]>
   Re: Process Version 2012 - LR5 created by ssprengel<http://forums.adobe.com/people/ssprengel>in
Photoshop Lightroom - View the full discussion<http://forums.adobe.com/message/5623364#5623364

Similar Messages

Changing between process version 2012 to 2010 in LR4

I know that the sharpening and noise reduction was improved for the 2010 process version. Were they improved more for the 2012 version? I would love to swich back to 2010 but I just want to make sure I don't loose the better quality of the sharpening and noise reduction. Thank you for any insight!!

Lauren424 wrote:
I would love to swich back to 2010
I realize you didn't ask for help with PV2012 (or a lecture about how it's better...), but I can't help but wonder: Why?
But to answer your question more specifically:
* Clarity was improved in PV2012, but sharpening and NR are same as PV2010.
Rob

Process Version 2012 for photos taken with Olympus OMD EM5

I have just purchased an Olympus OMD EM5. When I download images to Lightroom (v4.4) I have to manually convert to Process 2012. Am I doing something wrong? Why does this not happen automatically?

I can't tell you why it is doing that. Are you applying a preset on import that includes the older PV? Just a suggestion; you could create a preset that applies to the 2012 PV when images are imported.
Pardon my ignorance, but does that camera shoot DNG natively? If it does, I wonder if it is using an older spec. Don't know anything at all about this, just wondering.

How to get current process version when photos imported?

I have Lightroom 5 but my photos are still imported with the old process version (2010) How can I get the current process version (2012) to be applied automatically on my imported photos?

Hi Andreas,
Did you ever get an answer to your problem?
I am facing the same issue now and i cannot get a lead.
Thanks,
Dimitris

How do I get read of before (or after) process version i Develop module?

Hi.
Going through my photos in the develop mode, I am given the opportunity to upgrade to process version 2012. As I want to decide pictures individually before updating, I check the box Review Changes Before/After before I click Update. Sometimes I want to keep the old profile, sometimes I prefer the 2012 version. Either way, I use the bottom left arrows to copy the changes one way or the other. But whenever I get back to that photo i Develop mode, it will keep appearing side by side. I thought it would be possible to keep only my updated changes, and make it the only one to appear in my Develop window?
Ole K

Fine (although I was aware of those things above)! So the procedure should be
1) Open a picture in Develop Mode
2) Click the exclaimation mark (if there is any)
3) Click "Update"
4) Copy the new settings/version to the old one (or vice versa), and - back to my original question -
5) Click "Y" to decide that the preferred version will be the one that appears (on top) the next time I open this picture?
Am I getting it? So far, I've only just found Julieanne Kosts video on this, but if someone out there could point me to a more detailed step-by-step tutorial, I'd appreciated it, as this seems to be a rather important issue in LR4:
Ole K
(Did I really write "read of"?)

Process version 2010 to 2012 update differences...why?

I am a retired computer professional and I have used LR since V3 first came out and have recently updated my photos from process version 2010 to PV2012. I used the batch process as I have ~200 GB of photos. My batch process is as follows:
In the Library module, I clicked on > Library> select Show Photos in Subfolders. I then selected the Develop module, opened a folder and selected the first photo and manually clicked on the ! icon to Update to Current Process (2012). I then added all the photos in the filmstrip to my selection. I then clicked on Sync button to open the Synchronize Settings dialog and clicked on Check None and then check marked only Process Version and clicked on Synchronize.
I noticed that the batch process zeroed out all my settings in the Develop module Basic dialog. I no longer have my previous 2010 settings listed for the photo and in some cases it looks like some of the images have defaulted to an unprocessed state (under or overexposed, lack of color saturation). If I select a photo in the Develop module and go History and select the setting just prior to the "Synchronize Settings" to render it back to PV2010 and click on the image ! icon to update just that one photo, I get a totally different result. I retain the previous settings in the Basic tab and only the new LR4 tool settings are changed.and the History then states "Update to Current Process (2012)".
1. Why the different labeled result in History for the two processes?
2. Why are completely different results achieved in Develop module between the batch vs the manual update processes?
3. Have the photos really been updated from process version 2010 to PV2012 using the batch process listed above? As far as I know, I did the batch process correctly, as I even double checked online prior to processing in batch.
4. Can the images be "batched" back to PV2010? Would they change the photos that have been added since acquiring LR4 that are in PV2012? I can load last weeks backup PV2010 LR4 catalog, but I have added new photos since then and it would be a hassle to process them over again.
I am NOT happy with the results of my process update due to the loss of Develop Module Basic settings and in the completely different results achieved between the batch vs the manual update processes. I would like to keep my old settings that are not impacted by the PV2012 change and now they are gone in my current catalog.
Adobe, is this a BUG or a FEATURE?

In my opinion: not a good idea to convert old photos en-batch.
Recommend: convert (hand-selected photos) one at a time, or just use PV2012 on new photos.
There are more than one reason:
* As you know, process conversion yields very different results (if photo has been substantially edited).
* It takes some time to polish your PV2012 editing skills.
* Often when you are comparing PV2012 results to previous PV2010 results (which you've become familiar with, and like...), you may interpret differences in a more negative light, than if you were using PV2012 without comparing to a previous PV2010 version.
This last one can not be over-stated. Numerous times I have converted and been disappointed, at least initially. Recovered highlights can seem like loss of contrast. Detail in shadows can be distracting after initial conversion, until you step back for a while, then re-look at it...
Also, the process version itself (results I mean) takes some getting used to (even when not comparing to a previous legacy-pv edit). e.g. if you've become attached to the over-saturated shadows in previous process version, the shadows seem under-saturated in PV2012, etc...
Rob

2012 Process Version Alters Exposure/Contrast/Tone Curve

In working with the LR4 beta, I've come across a couple odd results. I imported some image folders containing raw, tiff and jpeg. The images were updated to the 2012 Process Version on import. I noticed that I had not saved out the metadata on the raw files for earlier edits in LR3. I closed LR4, opened LR3, saved out the metadata, reopened LR4, read the metadata from the files and this, unsurprisingly, reverted them back to the 2010 Process Version. When I update the raw images to the 2012 Process Version, the Exposure is reduced by 1 stop and Contrast is set to -33. Additionally, a significant Tone Curve adjustment is made. No such alterations occur to tiff or jpeg files in toggling back and forth between 2010 and 2012.
Please advise.
Thanks.

Eric, I guess what I'm trying to figure out is if they aren't going to 'look' the same then why would that be. Further, if no changes to the file were made (i.e., exposure, recovery, curves, etc) then why would there be such a radical change to the image on updating to a new process version?
As I noted earlier, I don't recall that updating to the 2010PV from the prior made such a change to images. In fact I just tried it. I switched back to 2003, then to 2010 then to 2012. No change to the image going from 2003 to 2010. Big change going from either 2003 to 2012 or 2010 to 2012. To my way of thinking, if I take an image processed with the 2010PV and am happy with the way it looks (it's displayed on my website, I've printed and sold it, etc.) then I update to the 2012 PV I shouldn't have to re-edit the image to get the same 'look'. I understand that due to the different controls some of the positions of the sliders may be different. But the two images shouldn't 'look' different. Take another example. If I've got a set of images from a commercial shoot, have edited them in LR and provided to the client, then I update those images to the 2012PV in LR 4 and the resulting images aren't the same, I've got to spend time (and money) re-editing to get back to what I had before. Does that seem right? It sure doesn't to me. It seems, actually, the exact opposite of what should be.
In the screen grabs above, this is a marked change to the image. It's categorically not just a difference in slider/control positions to get the same 'look'. It's a completely different image with a completely different look. The file has been radically altered. To me, that shouldn't be the case.
EDIT: I guess we were posting at the same time, Eric. Sorry, I understand the explanation but it just doesn't make a lot of sense.

Importing a 2010 process image into LR5

I've just exported as catalog 2 images from an older catalog ( process version 2010 into LR5. there was no way to automatically convert them to 2012 process.
I had to turn on the calibration panel in Develop mode and then set it to 2012 and then copy the 2012 calibration to the other image.
As a check, I checked this by exporting 1 image that was process version 2010 into LR5 and it automatically made it 2013,
Then I checked it again, imported a catalog from LR 4.3 which had only process version 2010 images in. The import upgraded and disgarded the temp library used in the upgrade process, and again, there was no option to automatically convert the images to PV2013.
See graphic below
Which has to be a dropbox link as the add image is not working in Chrome this morning,
https://dl.dropboxusercontent.com/u/39359917/LR5%20image%20from%20PV2010.png

The icon to indicate a previous process version image has been changed and relocated. See the "Thunderbolt" icon underneath the Histogram. Clicking on that will give you the update option.

Applying presets causes filter settings to get corrupted if process version updated

I have an ongoing problem with Lightroom 5.7 including earlier versions. The problem occurs when editing photos which use previous process versions (ie, 2010). My presets all have the Current Process version checked (as they should). Whenever I apply any preset to a photo, the settings for existing filters get corrupted (reset to 0). This includes my Graduated Filter settings, Adjustment Brush settings and Radial Filter settings. Those filters and their masks remain on the photo but their parameters have all been set to zero. I keep falling into this trap since it's natural to use my presets when making updates to photos. Often I don't realize this occurred until it's too late.
As a work-around (inconvenient) I can first manually update to the current process by right-clicking the photo and saying Settings/Update to Current Process (2012). Or by clicking the Lightening Bolt button in the upper right corner. But this must be done prior to applying any presets and I typically for get as my database has tens of thousands of pics. Even a preset with just the Process Version set will cause the filter settings to be corrupted. I'm not interested in applying a batch or Quick Develop process to all at once since I need to inspect each one as the process is updated. It would be great if this could be fixed in a maintenance release since it keeps biting me. I think it's important that this be fixed in LR 6.0 also. No doubt it's messed up many user's photos without them realizing it. Does anyone know a work-around so Presets can be used?
System: Win7 pro 64 (current), 4.2 GHz i7, 12GB, Lightroom 5.7.

In my opinion: not a good idea to convert old photos en-batch.
Recommend: convert (hand-selected photos) one at a time, or just use PV2012 on new photos.
There are more than one reason:
* As you know, process conversion yields very different results (if photo has been substantially edited).
* It takes some time to polish your PV2012 editing skills.
* Often when you are comparing PV2012 results to previous PV2010 results (which you've become familiar with, and like...), you may interpret differences in a more negative light, than if you were using PV2012 without comparing to a previous PV2010 version.
This last one can not be over-stated. Numerous times I have converted and been disappointed, at least initially. Recovered highlights can seem like loss of contrast. Detail in shadows can be distracting after initial conversion, until you step back for a while, then re-look at it...
Also, the process version itself (results I mean) takes some getting used to (even when not comparing to a previous legacy-pv edit). e.g. if you've become attached to the over-saturated shadows in previous process version, the shadows seem under-saturated in PV2012, etc...
Rob

Missing Process Version warning icon in LIghtroom 5

Since converting from LIghtroom 4 to 5 I the Process VErsion warning icon does not appear in the lower right of the preview panel when the file was processed using a 2003 or 2010 version. How can I re-establish the icon? Norm

It changed in LR5 to a "Lightning Bolt" which you'll see under the Histogram in the Develop module.

Lightroom 4 Defaults to 2010 Process Version

Mac OS X
Creating a new catalog, drag and drop a raw file into it, go to develop module, it is in 2010 process version by default. I want 2012. Help!

Geoff; How do I check import presets? When I go to the import window I can't find anything wrong, it seems everything is at its default but I could be wrong.
Check the Develop Settings drop down menu in Apply During Import panel of Import window (right side of window). Ideally, it should be none.
If you're saying for sure that everything is at default then it's possible that you've altered the default for your camera. Again, if this is the case then it's fairly easy to fix. Select one of the offending images, switch to Develop module, open 'Set Default Settings' dialog from Develop menu, then click on 'Restore Adobe Default Settings' button. You'll then need to select all of the images with wrong process in Library Grid view then click on 'Reset All' button (see Quick Develop panel).

Process Version 2010

I'm just curious how many other people out there are like me and still use Process Version 2010? I find that I cannot achieve the same quality results using PV 2012 - those controls simply do not offer me the flexibilty and overal tonal control that I have with PV2010. I shoot and edit fashion photography professionally, and I have very specific needs regarding tonality adjustments. I find I am reliant on Recovery, Fill Light, Blacks and Brightness sliders in order to fine tune lighting falloff on skin and clothing. I have tried numerous times to use PV2012 but the results are far inferior to PV2010 for my needs. Anyone else out there feel the same? In case you're wondering, you can see examples of my PV 2010 work on pretty much all the photos on my website (davidwalden dot com). I just can't get these results with PV2012.
Out of curiosity, is there a technical reason why Adobe can't combine both process version controls, and offer all sliders from both versions in one layout?
thanks,
d

trshaner wrote:
Combining PV2012's and PV2010's controls would be like adding a 10-band audio frequency equalizer to your sound system and then still using the Bass and Treble controls. They simply wouldn't play (pun) together very well and would make PV2012 even more difficult to use.
That's one way of looking at it, but I don't think the difference is that straighfroward. It's more like they've replaced some controls with other controls that they deem "superior", but honestly the 2 sets of controls yield completely difference results. Based on the results that you want, you might prefer one set of controls over the other. I definitely do not think that having both sets in one interface would make it more difficult - it would be the best solution. That would be the 10-band equalizer you mentioned
Highlights and Whites is supposed to be a more refined version of Recovery. I get that, and probably in some situations it is superior (architecture and nature photography). Btw, I looked at the Siggraph paper and yes, once again they are using architecture and naturally lit environments to show how much detail can be recovered. Recovering detail, in a very basic sense, is only one (limited) use of a photo editing toolset. Another (more important imho) use is controlling color and contrast on human skin at different tonality ranges. This is my primary concern during photo editing, and architecture and nature photo editing does not address these concerns. I find that the contrast that I get in highlight regions using Recovery gives me better results. Also, I use this in combination with the ToneCurve - Lights and Highlights sliders - to tweak the highlight ratios.
It is interesting that the 2012 Basic controls nearly mirror the ToneCurve sliders - Highlights, Lights, Darks and Shadows. Now we have 2 sets of controls in 2012 - Basic and ToneCurve - that affect similar regions. Is this redundant at all? Perhaps. I find that the ToneCurve and 2010 Basic controls actually compliment each other better, because they have distinct functional differences. For example, the Blacks slider is more akin to setting a black points using a Levels adjustment in Photoshop. This is different from using the Shadows slider in the ToneCurve, and different from setting the ToneCurve black point manually - these things yield different results. From my experience it is better to use the Blacks slider for this, and then tweak the value using the ToneCurve black point manually (although I typically use the the manual ToneCurve points for adjusting contrast, not for setting black points - that's why an additional Levels adjustment widget would be a superior solution imho).
Also, getting back to my earlier point about contrast at different tonalities, one thing that I have historically used Blacks and Fill Light in PV2010 is for adding/controlling *mid-tone* contrast. Increasing these together has the effect of increasing contrast in mid-tonal regions where previously no contrast was perceptible. This is an important part of color correction process. I have tried to replicate this effect in PV2012, but the mid-tones loose the contrast and detail. Adjusting the PV2012 Shadows and Blacks sliders from my experience produces "smooth" results, but not "desireable" results. Meaning that, the darker tonalities are lifted, but the contrast and detail is lost.
I will try to post one or more examples showing some of these concerns. I appreciate all the feedback you guys give.
-d

CS6 Process Version

This may be a daft question : In CS6 Bridge it shows an image that has been first time imported and put thru raw and photoshop.
that the process version is 6.7 Should that not read 7.1 images taken on canon EOS 450D
Thanks...

Screen shots are indeed essential.
I suspect you may be looking at a camera profile that was first created when ACR 6.7 was the then-current version. So we need to see what you are looking at and where.
For instance, in the screen shot below, you see Adobe Camera Raw version 7.1 hosted by Photoshop 13 ("CS6") opening an old .PEF file from a Pentax *istD on which, for demonstration purposes, I have selected the very first profile Adobe generated for that particular camera model when the most advanced version of ACR was 2.4. Therefore "Adobe Camera Raw 2.4" in the screen shot does NOT mean that is the version of ACR that is running.
The version running is indeed the very latest, Camera Raw 7.1, as you can see at the top of the ACR preview window, and the process being used in the rendering is 2012:
There is, therefore, a difference between "process named by year" and "Camera Profile named by the version of ACR" under which it was first introduced.

Lightroom Presets "process version"

I am creating lightroom presets to share (Lightroom 4)
I am confused about the box "precess version". Should I click it or not? What will happen if I click it and then there is a lightroom 5? Not sure what is the best choice and why there is even that option.
Thanks for any help!
Sarah

If Lightroom handled process version the way it should, that box would not exist. i.e. Lightroom would know whether there are process specific settings in it, and handle in an appropriate fashion.
However, Lightroom's handling of process version in presets is abysmal.
If I used presets, I would *never* check that box, and instead, keep presets with process-specific settings in a special folder, and/or give an indicative name.
Then manage process-specific presets without Lightroom intervention, until Lightroom handling is brought up to snuff, at which time existing presets could be retrofitted, if need be.
In any case, if preset is presently universally applicable, I recommend *not* checking that box, since there is no Lr5 yet. When Lr5 is released, you can revisit that decision, and consider retrofitting.
If preset is NOT universally applicable (*does* include process-version specific settings), then it's a tougher call. Either way, it won't do the right thing if you try and apply it to a photo with the wrong process version. So it's a matter of how you prefer it to fail. If you have the box checked, then it will convert PV and apply preset. Unfortunately, it won't let the conversion "settle" before applying the preset, so it won't work correctly, if at all, and anyway, it's usually not good to convert PV this way, especially if there are pre-existing edits. On the other hand, if you don't have the box checked, and you apply to photo with wrong process version, it will just ignore the process-version specific settings, which ain't much fun either... - it won't tell you about any of this, so you or your "clients" must take full responsibility for knowing whether they are applying a preset to compatibly edited photos or not.
If you decide you want to sometimes or always check that box, I would still handle presets in the aforementioned fashion, i.e. name and store so the scope of applicability of a preset is clear.
Maybe some other preset users will have a better idea for you.
Rob

Process version is very different

Hi !
The last time the process version was changed it was a real improvement all categories. But when I update old versions in LR4 I feel that they are way too contrasty. I don´t mind the sharpening but why all the contrast ?
Regards
Erik Doverholm

We've completely revised the tone controls in the Basic panel in PV 2012. Please see the release notes, and there are other threads her that discuss the changes.

Process Version 2012 - LR5

Similar Messages

Maybe you are looking for