Processing workflow items and sub tasks inside CIC

In CIC one can add a tab for the work flow inbox.
In one workflow we have a decision task where the user will be able chose to create an activity. How does one modify CIC so the work item processing occurs inside a tab in CIC. With the benefit that the user at the same time can access the other feature inside CIC and at the same time enabling the workflow process to process the necessary steps.

Hi Jan,
When u create a CIC profile then attach the transaction profile of ur sales activity or oppourtunity or any transaction to with ur application area and create a workflow with the start event of that transaction and add an event in the workflow for create or change of that transaction .
So when agent create the transaction by CIC then it will go to workflow event and an workflow event will trigger and go that transaction to the workflow inbox.
Regards,
Siddique

Similar Messages

  • Refresh workflow item issue after task processing

    Hi expert,
    We have a urgent client issue regarding work item in SAP inbox. I am new in workflow process.
    He has 142 work item in his inbox for invoce processing. But he has processed 70 from them. After processing these 70 invoices, all processed workitem should be gone from his workitem list. But some of wotkitem which has been processed, are still there in his inbox after refreshing inbox. I have check standard task TS30001128 has been used in workitem.
    Please sggest.
    Also How we can find workflow from TS30001128. Each work item has a workflow id. How we can check it?
    Regards
    Anutosh

    Hello,
    To find where a task is used, go to e.g. PFTC_DIS, fill in Standard Task and the task number, click Display, then click on where-used.
    For this case, I would look at the user's inbox in SWI5 and then click on the list of workitems to see the workflow log. It should tell you why the workitem is coming back (if he really did refresh).
    regards
    Rick Bakker
    hanabi technology

  • Serial Number assignment for main items and sub items

    Hi
    All, good evening, i need clarificaction on the serial number assignment. My client's requirement is to maintain the serial numbers, so in this regard when i am confirming production order in this i need some information how the serial numbers are picked and consumed for main items and the sub items.
    I need someone to help me in solving this.
    Regards
    Narsing

    dear Narsing,
    please look here:
    http://help.sap.com/saphelp_47x200/helpdata/en/dd/f8c817b3f911d1896e0000e8284931/frameset.htm

  • PO Release workflow: mail and Sub workflow/Dialog step related issue

    Dear All,
    I have crated a two step work flow for release of  purchase order with two release code X & Y.Creator C1 creates PO.A mail is trigger to X&Y .In first step  X release the PO.
    Then Notification send to C1 & Y that the Release of 1st step is effected.Then Y releases it and a mail of completions is sent to C1 .(Structure is as follows: Po creation ->Mail to XY->
    X releases(PO release)->Mail toC1 &Y->Y Releases->Mail to C1&X->Workflow complete).My workflow works fine but have following problems.
    1) System gives the three stages mail properly.But after completions also generates 2nd stage mail(Mail toC1 &Y).I have used "process control"at the end but
    still the mail reoccurs.How to control it?
    2) Two types of messages appears in the SAP business w/p of user.Sub work flow and dialog step.4 mesgs appears in the sap inbox of X & Y .2 of
    Sub work flow & 2 of Dialog step.How can i control it .Can i set 1 out of them?
    3) After completion ,work flow log shows two Graphical Workflow Log.One is completed and other up to stage ->Mail to XY-> How to clear this
    4) Organization plan is always must? or w/o that we can proceed?
    Pls Guide
    Regards
    Sachin

    Hello Rick,
    Sorry for any inconvenience caused.Intension is only to get quick focus from experts.
    I have redrafted my query .Please check
    I have crated a two step work flow for release of purchase order with two release code X & Y.Creator C1 creates PO.A mail is trigger to X&Y .(Structure is as follows: Po creation ->Mail to XY->X releases(PO release)->Mail toC1 &Y->Y Releases->Mail to C1&X->Workflow complete).My workflow works fine but have following problems.
    1) Reoccurring of 2nd stage mail.How to avoid this?At the end i  used"process control" with "outcome name=work flow completed.
    2) Two "work item type" message apeears in the out box of PO creators(sub)work flow and Dialog Step.Is this a standard or I need to correct it?
    3) After completion ,work flow log shows two Graphical Workflow Log.One is completed and other up to stage ->Mail to XY-> How to clear this
    4) Organization plan is always must? or w/o that we can proceed?
    Sachin

  • Selected items and LLA task

    Hi,
    I worked with EC-CS and I will have to configure BCS now. Although both have the slected item configurations to balance FS I didn't find a task like the Task 1110 in ECCS which balances the FS after loaded. Is there such task in BCS ? Where can I create it ?
    Thanks
    Renato

    Hi Renato,
    Or in the reclassification there is fuctionality that does it ?
    - There is no build-in functionality that does it.
    Just to confirm, I have to create a reclassification where the trigger is the sum of I/S accounts ?
    - not only. Please follow this scenario:
    http://help.sap.com/erp2005_ehp_02/helpdata/en/91/4b721354f68b45987210d89e9d30b3/frameset.htm

  • Archiving of Workflow items and Data stored - Reg

    All gurus,
    I am working on ECC 6.0 with the below system:
    SAP_BASIS     700     0015     SAPKB70015     SAP Basis Component
    SAP_ABA     700     0015     SAPKA70015     Cross-Application Component
    I understand that not all the data that is available in the regular workflow log will be archived. But, I'm not able to find any information guidelines by SAP regarding what information will be saved and how this criteria of selecting the information being archived is done and where.
    Can anybody tell me if there is any information regarding the above. Coz, this information archived(including the workflow and each ste (task) container data) is being inconsistent among various workflow logs.
    So, it would be really helpful if anybody can share their experience and give some suggestions on this data storage selection.
    Thanks in advance,
    venu

    Closing the thread due to no response.

  • Related to workflow ws10000031 and sub workflow ws10000049

    I am facing some problem while ececution of ws10000031 ( shopping cart two level approval workflow. we are working on srm 5.0 .  In SRM 4.0( it was older version which has been upgraded to SRM 5.0 ) we had ws10000031(  00013(00014)) and <b>ws10000049(0003(0004)) </b> in newer version we have same version of ws10000031(  00013(00014)) but version of <b>ws10000049(0003(0000)   here is a difference.)</b>   because which some excepetions are occuring.
    Please help how can I upgrade workflow  ws10000049(0003(0000)   to  ws10000049(0003(0004)) in SRM 5.0. Is there any note or patch available?
    Thanks and regards,
    Manish

    Dear Poster,
    As no response has been provided to the thread in some time I must assume the issue is resolved, if the question is still valid please create a new thread rephrasing the query and providing as much data as possible to promote response from the community.
    Best Regards,
    SDN SRM Moderation Team

  • "1 item" and pointed finger inside message box. Is there a fix for this problem?

    When I'm in e-mail, I get a hand with the pointed finger and a message box saying "1 item". The hand and box follow my pointer around the screen but I can't open up any e-mails. The only way out of it is to go up to Hotmail on top, select it and them select "In-Box." This only occurs in Firefox. Internet Explorer works fine and I never have the problem.

    The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
    Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
    To Reset Firefox do the following:
    #Go to Firefox > Help > Troubleshooting Information.
    #Click the "Reset Firefox" button.
    #Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
    #Firefox will open with all factory defaults applied.
    Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
    Did this fix your problems? Please report back to us!

  • Read sharepoint list items and display it inside a div in aspx page

    So I have this sample aspx page with this design:
    <div class="column1">Events</div>
    <div class="column2">Details</div>
    <div class="column3">Contact</div>
    Now, I want to dynamically change the words (Events, Details, COntacts) depending on the content of my "Columns" sp list.
    how can I do this?
    ----------------------- Sharepoint Newbie

    Place the label controls in the div tags  like
    <div class="column1">Eventslabel</div>
    <div class="column2">Detailslabel</div>
    <div class="column3">Contactlabel</div>
     public void ReadList() {  
      // Use using to make sure resources are released properly  
      using(SPSite oSite = new SPSite(pathToSite)) {  
        using(SPWeb oWeb = oSite.AllWebs[nameOfWeb]) {   
          // Alternately you can use oSite.RootWeb if you want to access the main site  
          SPList oList = oWeb.Lists[listName];  // The display name, ie. "Calendar"  
          foreach(SPListItem oItem in oList.Items) {  
            // Access each item in the list...  
           //Bind the values to label
            // etc....  

  • Is revenue and invoice at sub-task Level possible?

    Is there anyway to generate revenue and invoice at sub-task level. Per Oracle standard we can do it project level or top task level but just want to check if there is anyway to do it at sub-task level. Even if through customization please let me know.

    Hi
    You may consider using billing extensions that will separate the invoices by sub tasks. However, to acheive that you will need to run in a loop the GDI for the same project. After first invoice is generated with only one sub task. you will need to approve and release it, and only than you could go on and run GDI again for the next sub task, and so on.
    If the company agree that draft invoices will be automatically approved and released, you might consider using the automatic release client extension, to facilitate the cycles.
    In order to get a separate invoice per sub-task you should develop an extension that will be called on PRE-Processing place.
    That extension will check the available unbilled expenditures and verify if there are EI's in more than one sub-task. If so, select first sub-task and put one-time hold on all other sub-tasks' expenditures.
    The extension for automating approval/release of invoices is called by GDI after the draft invoice is fully prepared. You can
    develop your own logic for the conditions where invoice should be approved or released.
    Just note, if you leave several invoices as approved, you will need to release them by the order they were created.
    In the example of multiple sub-tasks on the project, the pre processing billing extension will leave EI's on sub-task 1, and all other tasks' expenditures will be put on one-time hold. Those the draft invoice will include only the sub-task 1 transactions.
    The next GDI in the loop will not find sub-task 1 transactions, so it will pick sub-task 2 and all remaining transactions on other sub-tasks will be put on one-time hold. The second draft will include only sub-task 2 transactions.
    The next GDI in the loop will not find sub-task 1 and sub-task 2 transactions. Therefore, next draft invoice will include the next sub-task. When no more sub-tasks'' transactions are available the draft invoice gets empty.
    The automation can go further if you have many projects with that same requirement. You may develop a custom program that call the GDI in a loop for a single project, untill there is nothing more to bill there, then go on and call GDI in a loop for the next project, etc.
    Dina

  • How to organize my photos in albuns and sub-albuns?

    Hi,
    I have Windows PC and wanted to know how to organize my photos in folders and sub-folders inside the Ipod.
    By sincronizing Ipod with a specific folder of your hard disk, all images are updated, but sub-folders are ignored. For instance, if you sinc the My Photos folder:
    c:\My Photos\2004\Family
    c:\My Photos\2004\Friends
    The Family and Friends photos will be cast together, because Ipod only sees one sub-level (the 2004 folder). Can anyone help with this? I tried the Photoshop Album, but I didn't manage to understand this program!
    Thanks!
    Carletti
    Ipod Video   Windows XP  

    As far as I know your only option is either Adobe Album or Photoshop Elements. (Not Album SE or a trial version)
    Once you've got your photo's imported, there are two tabs on the righthandside, tags and collections (? - I have a non-english version). Create a new collection and drag photo's on it or rightclick on a photo and select "Add to collection..."
    Now when you use iTunes to sync photo's from Adobe it will show the collections you've made and each collection you synchronise will show up with a separate name on your ipod.
    3G - Nano - 5G Windows XP
      Windows XP  

  • Relationship tables between header item and subitem in CRM

    Hi Everyone,
    I am using an E-commerce application where we have the porduct catalog consisting of header items and sub items.
    While creating an order, if the header item has a subitem it displays automatically.How can i know that this subitem should be displayed for  this particular header item. I mean to say, I just want to know the CRM tables where the relationship between header item and subitem are maintained?*

    Hi,
      Go through the CRMD_ORDERADM_H and CRMD_ORDERADM_I.
    Pass header guid into CRMD_ORDERADM_I table in the HEADER field you will get corresponding item details.
    If you want ot know sub items related to header pass your CRMD_ORDERADM_H table guid in the CRMD_LINK in guid_hi field you will get corresponding sub items fof your header.
    Regards
    Srinu

  • Bug with workflow that creates a folder and sub folder with the same name.

    Hi,
    I've found a possible bug in SharePoint 2010 workflows. I only have access to SharePoint 2010 and SharePoint Designer 2010 over my companies intranet, afaik I don't have access to to logs or anything server side so sorry for the any missing information.
    I had some problems with a workflow in one list that needed to create some folders and subfolders in a second list. The production version did a lot more so I setup a test area with 1 list and a workflow that only does the folder creation part and have managed
    to consistently replicate this problem.
    The test list has two columns, [title] and [sub folder title]
    The workflow starts by getting the values for [title] and [sub folder title] into variables.
    It then creates a folder in the same list with the same name as [title], and then creates a sub folder under this with the name from [sub folder title]
    So the resulting structure would be:
    Test List:-
        List item with fields [title] and [sub folder title]
        [folder: title]:-
            [folder: sub folder title]
    If both folder names are different (e.g Folder1 and Folder2) then it works perfectly fine, if both folder names are the same (regardless of character case, e.g. samefolderName and sameFolderName) then the workflow fails.
    As part of the test i made the first action of the workflow to log the message "Workflow Started" to the history list. When the workflow fail there's nothing logged in the history list other than the error: "The workflow could not update the
    item, possibly because one or more columns for the item require a different type of information."
    Creating a sub folder with the same name as it's parent works fine manually but for some reason a workflow can't seem to do it in one action.
    As there's no history list entries before the error it looks like the workflow is just failing to start but if i do something like add an if statement to check if [title] and [sub folder title] are the same, and only create the subfolder when they are not
    then it runs fine doing what it's set to.
    The function of the workflow in our office was for convenience so were just working without it. Just wanted to post to see if anyone else has come across this/could try to replicate or explain this  and see if it's a SharePoint bug or something specific
    to our setup.
    thanks,
    Martin

    not sure about the specifics of your workflow, but if you're querying the list for the folders... keep in mind that a list lookup will only ever bring back ONE item... even if there are several items that meet the filter criteria... example: if i search
    a list for an item assigned to "john doe", there may be 15 tasks that meet the criteria, and it'll only grab one... this is why SP Designer WARNS you when your list lookup may exhibit this behavior.
    Scott Brickey
    MCTS, MCPD, MCITP
    www.sbrickey.com
    Strategic Data Systems - for all your SharePoint needs

  • Need to deactivate task that generates workflow items not needed anymore

    Hi,
    Some users are currently getting workflow items with the error message: "Header del.date/Qty different than line item;..." for inbound orders. The users don't want to receive this error message anymore on their inboxes.
    I found out this error message is generated by the TS90100001. How can I find out if this task only generates this error message or if it is used to something else? And also, if this is the case, how can I deactivate this task?
    Thanks!
    Andrea

    Hi,
    I don't have access to TCode SWE2, if you think it would be useful for me, I'll request the access.
    I entered to see what the task does and found out the name of it which is: Order Change after post processing error.
    Object Category: BO BOR Object Type
    Object Type: ZBUS2032
    Method: CHANGE
    Not familiar with this sorry
    Thanks,
    Andrea

  • N- Level Process Controled Item workflow.

    Hi Experts,
    I am using Process Controlled item level workflow in SRM 7.0 (WS40000014) . My workflow is working for only one level approval.
    I dont know how to increase number of approvers.... Could any one please suggest a BADI and process to achieve this?  
    Thanks in advance,
    Regards,
    Bhanu.

    Hi Bhanu,
        Increasing the number of approval level( APPROVAL_INDEX ) is not same as SRM 5.0 in SRM 7.0.
         First you have to implement custom BADI for increasing Process level which is same (APPROVAL_INDEX), then implement another BADI to process the approval level. you can find the sample code for increasing the process level in standard Badi '/SAPSRM/BD_WF_PROCESS_SC'. 
    Best Regards,
    Saravanan Dharmaraj

Maybe you are looking for