Need to deactivate task that generates workflow items not needed anymore

Hi,
Some users are currently getting workflow items with the error message: "Header del.date/Qty different than line item;..." for inbound orders. The users don't want to receive this error message anymore on their inboxes.
I found out this error message is generated by the TS90100001. How can I find out if this task only generates this error message or if it is used to something else? And also, if this is the case, how can I deactivate this task?
Thanks!
Andrea

Hi,
I don't have access to TCode SWE2, if you think it would be useful for me, I'll request the access.
I entered to see what the task does and found out the name of it which is: Order Change after post processing error.
Object Category: BO BOR Object Type
Object Type: ZBUS2032
Method: CHANGE
Not familiar with this sorry
Thanks,
Andrea

Similar Messages

I need to deactivate my adobe suite but do not have serial number and if I have another activation that is valid

I need to deactivate my adobe suite but do not have serial number and if I have another activation that is valid

Moving this discussion to the Downloading, Installing, Setting Up forum.
Beverages1993 you can find details on how to activate Adobe Creative titles at Activation & deactivation help - http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html.

I have a licence code for Adobe CS6 Master Collection which I'm using for more than a year, suddeny I am in trial mode (all programs) an it seems that this code is not accepted anymore. Help needed!!

I have a licence code for Adobe CS6 Master Collection which I'm using for more than a year, suddeny I am in trial mode (all programs) an it seems that this code is not accepted anymore. Help needed!!

Chat Now button near the bottom for Activation and Deactivation problems may help
http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html

HT5262 if I backup with icloud, does that mean I do not need to sync on computer anymore

If I backup with icloud, does that mean I do not need to snyc on computer anymore?

Welcome to the Apple Community.
Syncing does more than just back up to iTunes, it depends what you were using the sync to do, if you sync content between your device and iTunes you would need to continue syncing to acheive this.
Being able to back up to the cloud can be very useful, especially if you don't have access to a computer or have infrequent access to one, however unless you specifically need to use iCloud for back up, you will find backing up to iTunes significantly more convenient and possibly more reliable.

On my iPad I have a working icloud that I have complete access to, but on my iPhone it keeps asking me for the password for it, but I do not know it! And the email that I used is not activated anymore! How do I delete the icloud account on my phone?

On my iPad I have a working icloud that I have complete access to, but on my iPhone it keeps asking me for the password for it, but I do not know it! And the email that I used is not activated anymore! How do I delete the icloud account on my phone?

Hi Aurion23,
If you intend to keep using iCloud on your iPad, your best course of action would be to update your Apple ID/iCloud information so that you have a known password and it is associated with an active email address. You may find the following articles helpful:
iCloud: Change your iCloud password
http://support.apple.com/kb/ph2617
Apple ID: Changing your Apple ID
http://support.apple.com/kb/ht5621
Regards,
- Brenden

GRC AC v10 SPM WF - Workflow Item not showing up in WF Inbox

GRC AC v10 - SP12
The outlook email notification for the Workflow Item goes out, but there is nothing in the NWBC Inbox for the WF Item. Subsitution is setup correctly.
Any ideas?
-john

Hi John
this is probably be a silly question but what substitution did you set up for ZFF_CTL_01? I assume the item is in that user's inbox. Which user is meant to be receiving?
I also noticed this KB article (1589130) which mentions the delegated person needs GRAC_REQ authorisation. Have you checked if security access issue?
There was also mention that the delegated approver does not appear in the MSMP instance runtime (your screen shot suggests same situation unless you have not set up the delegation). SP14 delivers the fix or refer to 1915928 - UAM: Delegated Approver is not visible in the Instance status
Possibly have a look at both of them to see if they resolve your issue.
Regards
Colleen

Appraisal Workflow - Item not completed

Hi,
After performing Approved or Reject in MSS for Appraisal Workflow, the task are not completed or removed from the UWL of the user. If we do the same from R/3 the workitem gets completed. I checked the workflow task and it always ask for 'Confirm End of Process'.
Any idea to how to do that?
Thanks,
SP

Hi SP,
Please also see BWF note: 902541. Also, please be aware that the workitems will not leave automatically as there is no real time refresh in the Universal Worklist. The quickest time that it will take will be 60 seconds. If you manually refresh do the workitems leave the inbox? Please check your parameters as mentioned in this wiki page:
http://wiki.sdn.sap.com/wiki/display/BPX/UniversalWorklistParameterConfigurationforOptimalPerformance
Beth Maben
EP - Senior Support Consultant II
AGS Primary Support
Global Support Centre Ireland
Please see the UWL Wiki @
https://www.sdn.sap.com/irj/scn/wiki?path=/display/bpx/uwl+faq ***

Workflow Item not created while processing draft PO from SOCO

Dear SAP SRM Experts,
In SRM 7.0, I've a scenario where I create a PO draft in sourcing.
In the 3step of the GAF, I've the option to
1. Edit the PO and order it.
2. Directly process the PO draft to create a PO..
While in case one the WF item is created with status awaiting approval, in the second case (when I directly process the draft) the workflow item is not created but the status is still 'Awaiting Approval' !!.
Use of PC workflow is done and the PO is not auto approved.
Any pointer regarding this would be very helpful.
The call stack is way different between the first step and second.
My understanding is if there is some error in the follow on PO, the work item would not be created. But the SC in soco is similar and while in first case it does create the workitem in second case it doesn't.
When does the decision to create workflow item is decided in second case?
Thanks.
Shushant

Hi Guys,
Thanks for your inputs.
The problem has been identified. The error is because the vendors are deleted completly from the system. And those were earlier used in shopping cart as preffered vendor. Thats why the system is throwing the error message.
As we can not process this SC further we want to delete this SC (line item). But again while deleting the SC the system is throwing the error message . "Business partner xxxxxxxxxxxxxxxxxxxxxxxx not found." Thus its not allowing us to delete the SC.
Do you have any ideas how we can delete the SC line items, or SC ? Any FM ?
Thank you,

I need to open iPhone that was wiped with Notes Traveler, appID not working

I have a phone (iphone5C) that I´ve sent a command "Wipe Device" using Notes traveler on Noted Domino 9.0.1. The phone is in locked state and unable to use the appID that was used to set the phone up. Think that there must be somekind of an software error in "Find my Iphone" or the cloud connect.
The phone asks for an appID s******@s*****.is and that is the correct appID. But when I log in , the phone says that the phone can not be unlocked using this email address.
Regards ,
Jóhann Már Sigurbjörnsson
IT manager , Farmers association Iceland

That's not how an iPhone should have been wiped. I have no idea what Notes traveler is but perhaps you should contact the developer since it was their software used to send the command.

Automatic approval workflow does not work anymore

Hi,
Our automatic approval workflows configured via standard business configuration sets (process controlled) do not work anymore. They did work previously.
After changing the BUS objects 'automatic approval' workflow into the 1-step manager approval workflow it does work.
- The 'automatic approval' workflow does not seem to generate a workitem, the bbp_pd 'workflow' part is empty. In addition previously approved documents via 'automatic approval' do not contain workitem details via bbp_pd either anymore.
- We applied a new SP (SP07) not that long ago.
- These documents go into status: 'awaiting approval', the documents 'approval' details tell us the following:
001 Automatic Approval Valid (Can be Started) Open (No Decision Made) SYSTEM system
However the system does not execute the task, how come? What normally ensures the system executes these 'automatic approval' tasks (report?)?
Any input is very much appreciated.
Kind regards,
Tim

Hi Balaji,
In SRM 7.0,
Our automatic approval workflows configured via standard business configuration sets (process controlled) do not work anymore. They did work previously.
- The 'automatic approval' workflow does not seem to generate a workitem, the bbp_pd 'workflow' part is empty. In addition previously approved documents via 'automatic approval' do not contain workitem details via bbp_pd either anymore.
- - These documents go into status: 'awaiting approval', the documents 'approval' details tell us the following:
001 Automatic Approval Valid (Can be Started) Open (No Decision Made) SYSTEM system
However the system does not execute the task, how come? What normally ensures the system executes these 'automatic approval' tasks (report?)?
Any input is very much appreciated.
Regards,
Shears

Why sudenly my mail stop fonctionning on my ipad,telling me that my server does not work anymore and I have to redefine my account information?

My Gmail stop working yesterday.Cannot sent or receive message telling me my account informations are not correct???

I did put all the informations and still it does not work telling that these informations are not right!!!!
HELP please

Outlook 2010 trying to create calendar/task entries generates error "Could not save item.The connection to microsoft Exchange is unavailable. Outlook must be online or connected to complete this action"

Office Version:Office 2010Operating System:Windows 7
Using Office 2010 on Windows 7 syncing with Exchange email account. When I am trying to work offline I get the above error whenever I try to create anything except a new email. mail seems to work normally and other items also work normally if I am online.
Problem only seems to be during offline use.
I have tried safe mode but still get the error. have tried creating a new profile but still get the same problem.
Could this be an issue with my exchange account which is somehow mucking up my offline folders??
At a complete loss with this one so any help would be much appreciated.
I have also occasionally seen an Outlook error along the lines of "your network adapter does not have a default gateway assigned" but am unable to reproduced this in any meaningful way.
Many Thanks

Cached exchange mode was already marked so that was not the issue.
I have done all the usual of creating a new profile, reinstalling Outlook etc but nothing seemed to work. I also tried going back to Outlook 2007 and reinstalling Windows but same problem.
However, I am not sure if it is connected but I was useing the option in MS Live Sync to synchronise Office settings which I turned off recently and now no longer have the issue. Unfortunately I cannot remember when in the process I did this so cannot be
sure it was responsible - anyone else found this?

Workflow item not opens the required document

HI Experts
We have workflow for accepting service entry sheet.
When work item clicked, it takes to ml81n but it opens ml81n with different document and not the required service entry document.
Please suggest how to get desired document when accessed through workitem.
thanks
ramSiva

Is this a standard workflow? Did you check if the service entry sheet (business object instance) is the correct one in the workflow log?
I would suggest posting the question in .
Cheers,
Andres.

Firefox moves the page in the window a bit to the left when browsing pages which need vertical scrolling compered to pages which do not need scrolling. This is not the case with IE.

''Locking as duplicate post, please continue at'' [/questions/748639] - Quarantine
I have asked this question before, but can not find any answer. My problem can be verified by trying to browse the variouws pages from the menu on my Web site, see URL below.
Thanks, Jakob Stette

Reset the page zoom on pages that cause problems: <b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
See [[Text Zoom]] and [[Page Zoom]] and http://kb.mozillazine.org/Zoom_text_of_web_pages

Download content locally when needed by running task sequence functionality with Windows PE.

I am trying to understand what happens when the "Download content locally when needed by running task sequence" option in chosen on a task sequence deployment. My assumption is that any needed packages would not be identified
and downloaded until task sequence is kicked off.
Using task sequence boot media, it looks likes a package has been obtained before any task sequence has been selected. I am assuming the package was acquired during the WinPE boot process. Can anyone confirm that this is
the correct behavior when using the "Download content locally when needed by running task sequence" option? If not, how would WinPE be obtaining the PS100292 SCCM package?
This specific package contains and HTA file. Only one of several task sequences deployed to the All Unknown Computers make a call to the HTA file. The one that does, the HTA call is the very first step of the task sequence.
--Tony

Hi everyone! I figured what was going on here. I was using an ESX VM and the package was stored on the c:\ from previous attempts and troubleshooting. Long story short, I had to rip the HDD from the VM and add a new one to set every thing back.

Need to deactivate task that generates workflow items not needed anymore

Similar Messages

Maybe you are looking for