Product  hierachy  traget data missing

Hi,
where we can see the  product hierarchy reports are missing the ‘Target’ data on the report summaries
please provirde all the Tcodes and 
why and what is the reason  inproductherachy missing the target data .
Subhash.

Hi Gurus,
when i am extracting the product hierarchy reports using the t.code kkrs .
I am unable to see  target data in feb 08 report only.  For Jan month i am able to see both the target data and actual data.
In feb month i am able to see only actual data. In  t.codes kp 26 and kp06 planning 
was done properly. what might be the reason of missing the target data in feb month in particlar plant .
i have  to check any plant wise settings .  this is very urgent .. please help me
subhash

Similar Messages

  • Product sales area data missing in crm

    hi, expert
    I'm currently having a problem with some of the products that are being replicated from R/3 to CRM.Product sales data initial synchronization is complete from ecc to r3,user create order is ok in crm.After a period of time,product sales area data missing in crm,we don't know when is lost,the problem is that we can't do an order for several products because there's no data in the sales and distribution tab(Sales Org., Distribution Channel) of the product master in CRM.

    Hi ,
    What you can do is,
    Create a request for a material whose Sales Area data is missing in
    CRM , and perform the request load in transaction:R3AR4.
    And please check whether sales area data flows to CRM.
    Put a filter in txn:R3AC1, to download single material or material
    range.And before performing an initial load in txn:R3AS,please make
    sure that sales area data is missing in CRM.Now, perform the initial
    load in txn:R3AS.And please check whether sales area data flows to
    CRM.
    Check the  filter settings in transaction R3AC1 for
    object MATERIAL and please make sure that it would bring down all
    the expected materials from R/3 along with the sales area data. I guess there is some
    filter setting which is blocking it.
    Please check the entries you have maintained in table MVKE - the entries
    for the sales data maintained here must match with the ones maintained in the
    filters.
    thanks & regards,
    Krishnen
    Edited by: Krishnen Subramanian on Aug 9, 2011 8:47 AM

  • Data miss match

    HI sdn Gurus,can anybody share with me some real time issues related to data miss match in support project.i am in need of it.i just want to know that what are the issue did comes related to data miss match in production & support environment.

    Hi
    Data mismatch means,The data in BW and data in R/3 are different...
    This is due to Some load failures,selection criteria is different from R/3 to BW..
    Need to look each and every step of data extraction..need to look at RSA3..How data is extracting..How data is appear at PSA..How data is populated from transfer rules and update rules..How data is loaded into Infoproviders..Some times data is correct in data providers and not correct in report result,because of selection conditions are different..You need to look at all these...
    Hope it helps
    Thanks
    Teja

  • My Adobe - all my previously registered product serial numbers are missing!

    I logged in to my adobe today using the same account I have used for years.
    I found that all my registered product serial numbers are missing.
    On previous log ins this list correctly showed all my adobe purchases.
    There must be about a decade's worth of purchased serial number now
    missing from this list.
    I had logged in to check my cs5.5 serial number in order to purchase a
    creative cloud subscription.
    However, finding all my details missing has put me off buying more products.
    Is the wiping of the data a temporary database problem at your end?
    or will this permanently affect my ability to upgrade products and services?

    Palaab wrote:
    …I contacted customer support and he asked for my serial number and then told me he can't help with this issue and I need to look in these forums for a solution…
    Most irresponsible, ignorant and unprofessional of that nincompoop who sent you to the forums for a customer service issue.
    Unfortunately, only Adobe customer service can assist you with your issue. These are user forums; you are not addressing Adobe here.  There's no one here who can help you.
    Click on the link below, and after that click on "Still need Help? Contact us."
    Then on the next page, click Chat
    There is also a phone option.
    http://helpx.adobe.com/contact.html?step=PHXS_downloading-installing-setting-up_licensing- activation

  • BP data missing in some Lead transactions of MSA.(Data Inconsistency)

    The BP information(Company name & Contact person) is NOT getting displayed on some of the Lead transactions on MSA. Although,it is displayed on most of the Lead transaction on MSA.
    1) If I download say 20 Leads from CRM Server to MSA, the BP data is missing only on some 4-5 Leads. All other Lead have the correct BP information.
    2) And, if 2 Leads are downloaded for the same BP, 1 Lead has the BP data whereas the other does NOT have it.
    -This shows that the BP data is available in MSA database but it is NOT displayed on the MSA tileset.
    -Also, we are able to pull the BP (Activity Partner & Contact person) under the respective BP search on MSA.
    We checked the Client SQL database table and all the data (Master & Transaction) are present there.
    However, when we check the tables for the Lead where BP is missing, the BP information is NOT available. i.e, the BP information is not available at the table level for that particular transaction.
    In spite of all the Master data available in database level.
    Can anyone please help us with this?
    Thanks in advance.
    Jags.

    Hi there,
    Yes.We are able to reproduce it as and when we want the "error samples".
    One more finding, we DON'T see this issue on DEV setup. It is working fine.
    However, when we try to upload the same flat file containing 24 Leads on Testing environment, invariably we get the "BP data missing" at least for 3 Lead transactions.
    This is the case on Production environment as well.
    We are already contemplating on OSS ticket.
    Thanks for your help.
    Jags.

  • Error " Data missing for the entry check while creating a new waste code

    Hi all, While setting a new Waste code I get the error " Data missing for the entry check, correction:". while filling the NAM- WASTECOCAT - LER item.
    This sould look for the catalog's name included in the phrase set but for some reason it doesn't find it giving me this error.
    I am changing original Characteristics, phrase set, classes, and value assignment type. Just to have my own estructure with Znames for all of them.
    I have also change the enviroment parameter "WAM_PHRSET_WACATLG" with the name of my phrase set.
    I have checked everything several times watching for typos or looking for a missing step.
    I have even tried including my new Z's characteristics in the classe and living the original SAP_EHS_1024_001_WASTE_CATALOG. (changing the enviroment parameter WAM_PHRSET_WACATLG to SAP_EHS_1024_001_WASTE_CATALOG) and it works.
    I will like to change this characteristic by Z_EHS_WA_WASTE_CATALOG
    Phrase set to Z_EHS_WA_WASTE_CATALOG.
    enviroment parameter WAM_PHRSET_WACATLG= Z_EHS_WA_WASTE_CATALOG
    After matching up the master data It should work fine but I might be missing something to get it running ok.
    ¿Any idea?
    Regards,
    Alvaro

    Hello Juan Carlos, the value and class that I want to duplicate and doesn't work is for Waste Code, I have also duplicated the one you have displayed (waste pproperties) without any problem.
    1.I have duplicated and changed class SAP_EHS_1024_001. to Z_EHS_WA
    2. Create a copy of the 5 characteristics included in this class.
    SAP_EHS_1024_001_WASTE_CATALOG
    SAP_EHS_1024_001_WASTE_CODE
    SAP_EHS_1024_001_WA_SUBCATEG
    SAP_EHS_1024_001_WA_CATEGORY
    SAP_EHS_1024_001_REMARK
    change the name by
    Z_EHS_WA_WASTE_CATALOG
    Z_EHS_WA_WASTE_CODE
    Z_EHS_WA_SUBCATEG
    Z_EHS_WA_CATEGORY
    Z_EHS_WA_REMARK.
    I checked the funcion C14K_WASTECATLG_CHECK is in the value of the Z_EHS_WA_WASTE_CODE characteristic
    I checked the funcion C14K_WASTECODE_CHECK is in the value of the Z_EHS_WA_WASTE_CATALOG characteristic
    3. Create phrase sets for each new category. with same name.
    4. Match up the master data.
    5. Change the enviroment parameter.to Z_EHS_WA_WASTE_CATALOG
    I think I have followed all the steps, but for some reason it doesn't find the catalog
    The phrase for the catalog is EWC in english and LER in spanish.
    Regards
    Alvaro.

  • Updating product revenue close date based off opportunity close date

    We do not use the product revenue close date, only the opportunity close date. We need to get the fiscal month of the opportunity close date but we have several reports the need to use the opportunity product history area and that does not contain the fiscal month for the opportunity. If we did a combined report, we cannot offer the user any prompts.
    Does anyone know how to get the opportunity close date fiscal month from the opportunity products area? Is there a way to update the product revenue close date when the opportunity close date it updated?
    Thanks

    Hi David,
    In the universe you describe you have the opportunity 'Close Date'. Use a 'case-when' expression to create the 'Fiscal Month' you need.
    Other than that you can use the JoinFieldValue function in the application to retrieve the opty close date, but that will require you to update product revenue for it to trigger which probably won't work for you.
    Good luck.

  • BAPI/Function module for production version tab data of  MRP4 view(MM01).

    Hi,
    I have to upload production version tab data of  MRP4 view(MM01).Please suggest a function  moduleor bapi  for the same.
    Thanks.
    Edited by: sanu debu on May 6, 2009 3:24 PM

    >
    sanu debu wrote:
    > Hi,
    > I have to upload production version tab data of  MRP4 view(MM01).Please suggest a function  moduleor bapi  for the same.
    >
    > Thanks.
    >
    > Edited by: sanu debu on May 6, 2009 3:24 PM
    BAPI_MATERIAL_SAVEDATA can be used, populate the respective fields in input parameter PLANTDATA

  • Error in Billing doc posing to FI - Export data missing

    Hi Experts ,
    While releasing SD Bills to Accounting Some export documents are not posted to FI and posting status is given 'G' (Posting document not created export data missing ).
    Please give me solution which data may missing to post export billing documents to FI.
    Amol

    Hi amol
    Go to VF02 and first go to item data -> foreign trade data tab and click on the incompletion log , you will get the list what all to be filled . Once you complete. then go to header data -> foreign trade data tab and click on the incompletion log ,you will get the list of data which has to be filled and you can fill it and save it .
    Then once the billing document is saved it will be passed on to FI
    Regards
    Srinath

  • Schedule line item data missing in Purchase order form in ECC6.0

    Hi All,
    We are doing ECC6.0 upgradation project . I am trying to print Purchase order in ECC6.0 , all data is coming fine in PO except schedule line item data is missing.
    Same print program and form works fine in 4.7E but schedule line item data missing in ECC6.0.
    Print program is a copy of standard SAP program SAPFM06P and layoutset is a copy of MEDRUCK.
    If anyone knows if there is any OSS note for the standard print program or any solution please let me know.
    Thanks,
    Sonali.

    Resolved on own.

  • Posting Document not created (export data missing)

    We are working on ECC 6.0 and during creation of Cancellation Billing document type IVS for the Intercompany billing, the document did not create Accounting document giving the Posting status as G - Posting document not created (export data missing). However checked the Foreign trade data and the system states that Foreign trade is complete.
    Can any one suggest the solution for this?
    Thanks.

    Hello Mohammad,
    About this issue, the incompletion of this cancellation document
    arises might because the reference delivery has been archived/deleted.
    This is likely due to your current copy control settings (VTFL).
    If you have set ' ', in the export determination field this means that
    there is a common 'exnum' key between the delivery and billing documents
    LIKP-EXNUM & VBRK-EXNUM are the same.
    The result of deleting the delivery is that you also delete the FT data
    for the delivery, Because the billing document and delivery share the
    same foreign trade table entries, you have in effect deleted the FT data
    of the billing document too. This would most likely go unnoticed but if
    you then cancel the invoice the system has no FT to copy into the new
    cancellation billing document, which leads to this issue.
    Firstly you should set the export determination flag in the copy control
    of the delivery & billing documents. This will avoid this issue in the
    future. Set it to to 'A' or 'B' depending on your requirements.
    For the incomplete cancellation billing document, you could use userexit to
    set it as complete:
    You can use transaction CMOD.
    Create a project for example FT project button create short text: ....
    drop button Enhancement assignment & save use for example local object.
    Use the F4-help for Enhancement and look for V50EPROP.
    Drop button Components:
    here you will find EXIT_SAPLV50E_005 and EXIT_SAPLV50E_006
    In the userexits doubleclick on the includes ZXV50U05 and ZXV50U06
    The coding in the userexits should be: C_COMPLETE = 'X'.
    Afterwards activate generate ... and save.
    The development class is VEI.
    Please also check note 118573 which explains the FT user exits.
    Regards,
    Alex

  • How Production Order finish date and time is being comptued by SAP?

    Hello Expert,
    How Production Order finish date and time is being comptued by SAP? for example, we create a Production Order via CO01, the basic start date is 29.09.2008 and time is 04:00 it gives us basic finish date is 29.09.2008 and time is 13:28.
    how does SAP compute the time 13:28 as it finished time
    Please explain me briefly.
    Thanks
    Ryan

    Hello Guys,
    When we create Production Order in R/3 the time is calculated by routing but it is extended at SetUp machine time. It is not correct?. SetUp imachines time used only for first Production Order for the same product and it is plan manually, for others Production Order we need calculate time for production without SetUp machine time being pick up to compute finish time. how could we achieve this? only those Machine time will be check.
    thanks

  • Smartview - HypExecuteQuery with suppress rows 'No Data/Missing'

    Hello,
    I'm executing a MDX query by executing the command  'HypExecuteQuery' and I set the options suppress rows 'No Data/Missing'.
    But everytime, the query is working successully but without suppressing missing data.
    Does someone know it the suppress missing rows is compatible with the hypExecuteQuery or 'Execute MDX' ?
    SmartView 11.1.2.5.210
    Office 2010
    Thanks in advance for your answer
    Best Regards
    Benjamin

    Hello,
    The solution is as follows :
    SELECT
         NON EMPTY {[MEMBER_NAME]} ON ROWS,
         NON EMPTY{[MEMBER_NAME]} ON COLUMNS
    FROM <APP>.<DB>

  • Since mountain lion Find in Numbers 3-4 columns of data missing and some columns in the wrong order. Fortunately I have a back up on my iPad and was able to put that version in as a new file. Why has this happened ?

    Since mountain lion I have noticed 3-4 columns of data missing from a Numbers file. I have fortunately been able to replace the total file from my iPad version but why has this happened. Makes me lose trust in Numbers

    That would be strange.

  • Photomerge interactive is no longer available in 12.  I wasted 4 hours trying to find the option.  Then read in a forum that the feature had been discontinued.  Interactive is the primary reason that I keep the product up-to-date.  When will the feature b

    Photomerge interactive is no longer available in 12.  I wasted 4 hours trying to find the option.  Then read in a forum that the feature had been discontinued.  Interactive is the primary reason that I keep the product up-to-date.  When will the feature be returned?

    No one knows if the interactive dialog will return, except adobe and adobe is not saying.
    What operating system are you using?
    On windows there is a way to get it back, but not if your using a mac.

Maybe you are looking for