Product is not showing Dangerous in Shipped to country

Hello Experts,
Need your guidance in one situation here. Product was not shown as DG in delivery document however the product is Dangerous. The issue here was it is going to be shipped to Egypt. The route it was following is that it was going through Italy. SD person analyzed this issue and told that In Customizing (SPRO) Egypt is not included in ADR states and hence for Egypt the product is not shown as DG.
I doubt this analysis and need your guidance on this. Is the analysis true. If yes then do we carry out customizing and add Egypt in ADR states.Now a days we get lot more of these issues where DG information is not shown on SD documents. Your precious guidance will be very helpful.
Devdatt

Dear Devdatt
regarding my original post:
Egyt is clearly no ADR state. And therefore you should add it. => sorry mistype.
Egyt is clearly no ADR state. And therefore you should NOT add it
Regarding other topic. The SD/DG set up should always be done "worst" case. So Egyt is no ADr county but Italy is. Therefore at least ADR should be detected as relevant. What is shown in the DG log?
Regarding documents. if check is not "successful" document content is assumed to be wrong as well. But may be check as well:
Printing Dangerous Goods Documents - Dangerous Goods Management (EHS-DGP) - SAP Library
Output of Dangerous Goods Documents - Dangerous Goods Management (EHS-DGP) - SAP Library
Outputting Delivery Notes - Dangerous Goods Management (EHS-DGP) - SAP Library
Outputting Packing Lists - Dangerous Goods Management (EHS-DGP) - SAP Library
Regarding other topic. may be check on top:
http://help.sap.com/erp2005_ehp_06/helpdata/en/ef/a3b57eb9ec11d295a400a0c9425fbb/content.htm
Enhanced Determination of Country and Mode-of-Transport Category - Dangerous Goods Management (EHS-DGP) - SAP Library
What happes if transport would done from Italy to France etc. (just inside ADR)? Do you get the correct reaction of the system (That ADR is relevant and that Material is dangerous etc.)
Is the effect always related to ADR country => no ADR country movement ?
C.B.
PS: may be check as well: SAP Environment, Health, and Safety Management (SAP EHS Management)

Similar Messages

My registered product does not show in my account

I installed Acrobat XI Pro upgrade using the vendor supplied serial number and also registered the product. When I look at my onlibe account the product is not listed, and when I try to add it with the supplied SN, I am told to enter a valid SN.
How do I add the product to my account?

For whatever it's worth, I've had the same "problem." I recently purchased PS Elements 12 through Amazon. I installed it onto a new Windows 7 64 bit desktop from the Adobe DVD provided. (There were no prior Photoshop installations on the machine, trial versions or otherwise.) I entered the serial number enclosed in the product box during the initial set-up process. When I opened the program for the first time after completing the set-up and rebooting, the Welcome screen advised me to register my product. I had to first create an ID on Adobe to do so. Once that was done, I followed the instructions under Your Registered Products to add Photoshop Elements 12, using the same product serial number entered previously. The site accepted it, recognizing what the product was from the number. A note advised me that the products list could take up to 30 minutes to update. When I checked back a couple of hours later, however, it still showed that I have no registered products. I have repeated the registration drill twice with the same results. Now, a couple of days later, it still shows I have no registered Adobe products.
Apparently my PS Elements 12 is properly activated, though you'd certainly never know that from looking at any of the info screens online or from anything that's displayed inside the open program itself. I'm guessing that online activation and registration must be two entirely different things. The program itself appears to be running flawlessly.
One thing I've picked up on from this is the importance of keeping a backup copy of your product serial number in a safe place. You're probably not going to be able to log onto the Adobe site and recover from there later, if it happens to get lost.

My products are not showing up in my account prior to 2012 - is this a new issue?

Nothing is showing up in my account prior to 2012. When I call Adobe, they can see all my products (from 2000 on) but I can't. I used to be able to. I've called 2x and haven't gotten any resolutions. Does anyone know what's going on with this?

Hi Jeff,
Exactly - I do not see them under my account. I have already deleted history, cookies, etc., had my password reset 2x and tried 2 other browsers. I have all my serial numbers that I've saved at home.
The problem is that I do not see any of my products beyond 2012. I only see a few under orders. I don't see any that should be registered.
I'd attaching a couple of screenshots so you can see what I see (serial #s and personal info covered up with gray boxes). I should be able to, right? I used to be able to. This happened 2 years ago as well and finally someone fixed it. Obviously there should be a lot more listed.

Products are not showing in Call list

Hi
I executed campaign with communication medium phone and generated call list.in campaign i massaigned product.But in generated call list i am not able to see the products which is maintained in campaign.
i think i missed some setting.can any one suggest how to bring products to call list through campaign execution
Thanks & Regards
kishor kumar

Hi Kishore,
There are 2 points:
1. I have created a campaign for opportunity with products. Result - Opportunity created without products.
2. I understand that we cannot create campaign or campaign element to trigger Opportunity directly, but only allowed to cretae Lead, Sales order. Some of our experts confirmed the same In this forum.
In this case, as per point 1, I dont know how it allowed to create an oppt thru campaign.
Any thoughts.
Edited by: Kalees on Mar 31, 2010 12:11 PM

Creating new track - software catalog new product not showing up - Help!!!

Hi,
Creating a new track for custom development.
A new product has been added in the software catalog in SLD.
SLD and NWDI (netweaver 04) are on the same system.
The new product is not showing up when trying to select in the new track, Software Components for Development section. Why??
Does the server need to be restarted after adding a new product? This is difficult for us as SLD has production systems tied to it!!!
Thanks in advance
Regards, Neeta

Thanks - This did the trick. I have awarded points!!!!
Regards, Neeta

Price of the product not showing in e-commerce

Hi,
I am Configuring the E-commerce in standalone server. I need some information here. I hv configures the e-commerce and while login to make a order the pricing is not showing. I should get the price of my product. I maintained the price in CRM Standalone server and it is working fine in GUI and when I create the Internet Sales Order in GUI it shows the price but why not showing in E-commerce.
First of all I configured the E-commerce and the product and product catalog and everything is showing. When ever a custmer buys the product and make the sales order the price of the product is not showing.
Second thing if 1 customer log in e-commerce and order for the product he will consider as a general customer and in GUI we create the BP Sold to party and assign the sales area data and it works fine while creating the sales order in GUI. But While a customer makes an order in e-commerce he is the general customer and we dont have any sales area data for that customer and when he makes order the pricing does not show. If I open that transaction in GUI then the error is pricing data couldnot be maintained for this partner. Then while makig an order in e-commerce from where the pricing data will come .
Here i need clarification wheather we have to connect IPC to e-commerce to get the product data or if we maintained the product price in CRM Standalone server that will take also.
The problem is here i am not getting the product pricing in e-commerce.Is it mandatory to connect to IPC server?
Pls suggest me.
Thanx
Chinmaya

Hi,
Please check.
E-commerce B2B : Pricing not displayed in catalog
Let me know if you require any further help.
Thanks & Regards,
Nelson S Raj

I registered Adobe Acrobat XI Pro but it does not show up as a registered product in my account.

I completed the registration page and got a "Your account will update in 30 minutes" prompt. That was two hours ago. The product does not show in my "Products" profile. What should I do?

Hey Jan Kovarik,
Could you please let me know how have you registered for Acrobat.
Hope to hear from you.
Regards,
Anubha

"My Products" no longer showing up in posts

Just noticed this for many members.
When a post is made, "My Products" is no longer showing up at the bottom of the post like it used to.
I checked my profile and it shows My Products still listed there.
I see many people that are not showing either yet, some other members do have My Products showing.
Must be a glitch from last nights update?
Just now I see at the bottom of this new question there is are radial buttons to show your "Product"...
I clicked on one of the radial buttons and will see if this works.

When replying, the "My Products" are not showing for me.
Look below and you will not see any of the products in the reply.
Is this a change for the better?
Maybe we only need to see what the original poster has?
Any other thoughts?

On e-bay or similair sites a reproduction/photo of the product is not on screen; why does it not work like Opera /Chrome?

just download last beta of firefox..after startup i activate www.marktplaats.nl.. the small pictures of the products is not showed!

Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
*A way to see if images are blocked is to click the favicon ([[Site Identity Button]]) on the left end of the location bar.
*A click on the "More Information" button will open the Security tab of the "Page Info" window (also accessible via "Tools > Page Info").
*Go to the <i>Media</i> tab of the "Tools > Page Info" window.
*Select the first image link and scroll down though the list with the Down arrow key.
*If an image in the list is grayed and there is a check-mark in the box "<i>Block Images from...</i>" then remove that mark to unblock the images from that domain.
*You can see the permissions for the domain in the current tab in Tools > Page Info > Permissions
*You can see all exceptions in Tools > Options > Content: Load Images > Exceptions
See also [[Images or animations do not show]]

ST03N Tcode not showing last 3 days average response time

Hi,
In my Production system not showing last 3 days average response time.In our production 1 (CI+DB) and 3 dialog instances are there. In all servers sapcollector working fine but in all servers not showing last 3 days values.Please advise solution.
Thanks,
Srinivas.

The following are the prerequisites needed to get the workload monitor(st03) working.
1)      The system time zone of the SAP and the Operating system has to be same. This can be done by customizing time zones of the SAP using the Tcode STZAC.
2)     All the standard background jobs has to be scheduled to run. This can be done by scheduling the standard background jobs using the Tcode SM36.
3)     The following parameters has to be added to the instance profile.
Parameter                                                  Value(default)                                                  Description
i.     stat/as_collect                                                          = 2                                          Application statistic: detailed records.
ii.     stat/as_level                                                              = 1                                          Records for application statistic are active.
iii.     stat/max_files                                                           = 48                                        Max. no. of stat files to be kept.
iv.     stat/as_max_files                                                    = 48                                        Max. no. of appl. stat files to be kept.
This can be done by editing the profiles using the Tcode RZ10.

Shipping option not showing in shopping cart

For some reason, on my shopping cart, the shipping options are not showing.
Site: Home Page
Products with all elements entered: Candy Apples, Caramel Apples, Monster Apples
I have added 2 FedEx options, all with the correct information from FedEx entered
I have added all dimensions to the "Apples" in the products
If you try and "Check Out", it goes straight to acting like the user is buying a "Gift Voucher"
I really need help as this is the last true item I need fixed before finishing the site.

Hi
Try this.
Go to Site Manager > Module Templates ->Online Shop Layouts -> Shopping Cart
Locate the {tag_shippingoptions}
Change like this {tag_shippingoptions,true}, save.
Refresh the shopping cart now, you should see the option to select shipping
To see more option, Refer to this article Business Catalyst Help | Add shipping options to your online store
Do let me know if you have any question.

IDCS3 - Mac: Plugins do not show up on production machines

I have converted a series of plugins on my Mac from CS2 to CS3 and have made their release versions available to our production people. I can see them fine on my box, but when the plugins are installed on Macs other than my own the plugins do not show up inside of InDesign. I have verified that the plugins are installed in the appropriate location on the hard drive. Has anyone else had similar problems and if they did, how did they solve it?
TIA!
John

Hi John,
Sorry about my confusing message. "CFShow(CFSTR("your message"));" is a way to output text from your code to the Console in runtime. You may be able to determine the flow of your code.
pete

My Lightroom 5 upgrade serial number not showing up on My Products page; chat support useless

I purchased a Lightroom 5 upgrade license on July 25th. I didn't receive a confirmation email but my serial number was displayed on the order summary page after purchase. I tried registering the serial number repeatedly through the My Products page but for some reason the serial number wasn't showing up, even though the registration process reported a successful result. Furthermore, Adobe products bought from the Adobe store should automatically be registered according to Adobe's web site. Apparently this must have failed. I need to reinstall Lightroom 5 but the serial number is still not showing up on the My Products page. I just spent an extremely frustrating hour with Adobe "Live" chat who did nothing but send me in circles and repeat the same canned responses over and over again.
I'm currently on hold with "phone support" but I'm not optimistic as I've been on hold for 28 minutes. The only other support option was a link to this forum, hence this post. Hopefully someone from Adobe can retrieve my serial number and contact me. Failing this my only other option will be to contact VISA and open a claim.
My comical-if-it-weren't-so-sad conversation with Adobe support:
Hi, there are 36 customer(s) in line ahead of you. We'll be with you as soon as possible. Thank you for your patience.
Hi, there are 35 customer(s) in line ahead of you. We'll be with you as soon as possible. Thank you for your patience.
Hi, there are 31 customer(s) in line ahead of you. We'll be with you as soon as possible. Thank you for your patience.
You are now chatting with Bhagawan.
Bhagawan: Hello! Welcome to Adobe Customer Service.
Joel: Hello
Bhagawan: Hi Joel.
Joel: I need to reinstall Lightroom 5 but my serial number is not showing up under My Products & Services on the website
Joel: I bought a Lightroom 5 upgrade back in July
Bhagawan: I will be glad to check and help you with this issue.
Joel: For some reason the product registration is not showing up under my account. I have my VISA transaction info if it helps you find my purchase.
Joel: Thanks
Bhagawan: I'll be right with you.
Joel: ok
Bhagawan: Okay.
Bhagawan: May I know the email address, please?
Joel: ******
Bhagawan: Thank you.
Bhagawan: Let me check on this.
Bhagawan: For security reasons, could you verify your complete name and billing address as mentioned on your account please?
Joel: Sure:
Joel: Joel ****
Joel: **********
Bhagawan: Thank you Joel.
Bhagawan: Joel, I see that your serial number is registered under your adobe account, please sign out and sign in your adobe account click on My Products and service information to retrieve the serial number.
Joel: I only see Lightroom 4 ... not Lightroom 5.
Joel: But I'll try
Joel: Give me a sec
Bhagawan: Sure.
Joel: Nope...still only shows Lightroom 4
Joel: Products in use Version Platform Registration date Lightroom 4 Mul October 4, 2012 Register new products
Bhagawan: Okay.
Joel: Not sure why it isn't showing my upgraded license for Lightroom 5
Bhagawan: Please give me a minute or two.
Joel: ok
Bhagawan: Sure.
Bhagawan: Thanks for staying online.
Joel: np
Bhagawan: Joel, In this case, I'll transfer this chat to our Concern Team to check and help you with the serial number.
Joel: ok
Bhagawan: Please stay online.
Joel: ok
Please wait while I transfer the chat to the appropriate group.
You are now chatting with Naveen R.
Naveen R: Sorry for the wait. Please do stay online.
Naveen R: Hello! Welcome to Adobe Customer Service.
Joel: ok
Joel: Hello
Naveen R: Hi Joel.
Naveen R: I understand that you are unable to locate the serial number.
Joel: I purchased Lightroom 5 on July 25, 2013 as an upgrade for Lightroom 4. I need to reinstall Lightroom 5, but my serial number is not showing up in the products & services page.
Joel: I looked through my email receipts and couldn't find an order confirmation (or anything from Adobe related to my recent purchase.) After purchasing the upgrade, the serial number was displayed and I thought I had registered it using the Adobe account portal
Joel: Apparently, this didn't work. I have my VISA transaction information if required.
Naveen R: Thank you for the information.
Naveen R: I will be glad to check and help you with that.
Joel: Thanks
Joel: As I mentioned to the previous agent, when I got into My Products on the Adobe portal, I can see my Lightroom 4 info, but the Lightroom 5 Upgrade info isn't there.
Joel: got = go
Joel: sry
Naveen R: Thank you for waiting. One moment please.
Joel: ok
Naveen R: I'll be right with you.
Naveen R: Sorry for the wait. Please do stay online.
Joel: ok
Naveen R: Thank you for waiting. One moment please.
Naveen R: Sorry for the wait. Please do stay online.
Joel: Will it take much longer?
Naveen R: Let me check on that.
Joel: Are you alive?
Naveen R: I'm sorry due to application error I'm unable to check on that.
Joel: Can I please get a phone number to call? My only other choice would be to open a claim with VISA for fraud since Adobe seems unwilling to help in this matter
Naveen R: I will provide the steps to locate the serial number on your Adobe account.
Joel: I already know how to look for a serial number. The problem is that it doesn't show up in the Adobe account portal.
Naveen R: Please login under a different browser.
Joel: Already tried. Used IE then Chrome
Naveen R: Delete the cookies refresh your browser.
Joel: Same problem
Joel: Please provide me with a number to call
Naveen R: *Once you login to the Adobe account, click on "My products" under the "My products and services".
Naveen R: *There you can locate the serial number which you have registered.
Joel: I've already done that.
Joel: It is NOT listed
Joel: Which I've been saying for the past 40+ minutes
Naveen R: May I know the email address you logged into Adobe account?
Joel: ******
Naveen R: Thank you.
Joel: ...
Naveen R: Thank you for waiting. One moment please.
Naveen R: I see that your serial number is registered under your account.
Joel: Lightroom 5
Naveen R: I will provide you the serial number via email after ending this chat.
Joel: ok but please make sure it isn't Lightroom 4 but my Lightroom 5 serial number
Naveen R: Yes. Due to some technical error you are unable to locate it.
Joel: ok please send the serial number
Naveen R: Sure.
Naveen R: Is there anything else I can help you with?
Joel: No
Naveen R: You are welcome.
Naveen R: Thank you for contacting Adobe. We are available 7 days a week, 24 hours a day. Goodbye!
This chat session has ended.
Thank you for contacting Adobe.

OK, I was able to recover my previous system's image and thankfully it appears you can get the serial number from Help->System Info. I attempted to register the serial number again via the My Products page and while it indicated that the registration was successful, we'll see. At least I should be able to install LR5 on my new machine now.
Edit: I also just discovered that the serial number is listed under My Orders, but not under My Products. Weird. In my defence , I never thought to check My Order history because I never received a confirmation email and the order wasn't listed after purchase...even as late as mid-August (when I last checked.) Very strange but it's all good now.
Edit #2: OK now I just feel silly. I just received an email from Naveen with an actual support case AND the correct serial number. So, I stand corrected. The Live Chat process still felt incredibly long with some seemingly canned/automated responses but, in all fairness, he did get back to me. Thank goodness I washed both feet today...

CN41N and S_ALR_87013533 report not showing Production order planned cost

Hi Experts,
I am having issue to get total planned production order values in my CN41N or S_ALR_87013533 cost report. I am facing 2 issues :
1. CN41N repoet does not show individual material cost planned in BOM.
2. CN41N report and S_ALR87013533 report does not show total value but only picking fixed value.
Example :
1. CN41N report :
Above screenshot shows no values in Project plan cost & Order cost column but it shows total cost as a lumpsum on top for project. I need to know how can i get material cost populated here for Project Valuated stock material?
2. S_ALR_87013533
This report shows Total Cost of BOM as 1 line under Material Procurement activity similar to CN41N report. Also Order value is picking from Fixed cost from planned order and total cost is added on top. How can i get Total cost picked from production order?
Is there any Setting in PS config which allow me to pick the detail production order plan cost in both report under planned cost.
Thanks in advance.
Ashish

Hi Ashish,
I doubt whether Item level reporting in S_ALR... (hierarchy report) is possible or not because I haven't seen item level cost in them only the lump-sum cost because they are summarized at cost object level itself. Navigation path are there which we use to go into details of cost.
Please check the following links:
https://scn.sap.com/thread/1743833
(In the above thread,focus on Mr. Mohamed Rafi comment.)
http://scn.sap.com/thread/3530080
http://scn.sap.com/thread/1311820
Order cost plan in report CN41N
Display of plan cost.,&nbsp;CN41N&nbsp;|&nbsp;ABAP,&nbsp;SAP,&nbsp;benX AG,&nbsp;benXBrain,&…
Just an additional pointer ,have a look on your costing variant and variation variant settings for material section.
Regards
Saurabh

On Windows 7, CS6 all products, but especially need help with ID. Fonts that are showing in other applications are not showing in ID.

on Windows 7, CS6 all products, but especially need help with ID. Fonts that are showing in other applications are not showing in ID.

The ID Program folder will be relevant to your OS...
I took a shot and right clicked on my Scripts Samples, choose reveal in Explorer and opened up the ID Program folder.
As shown, there is a Fonts folder.
Drag/Copy/Paste fonts to this folder.

Product is not showing Dangerous in Shipped to country

Similar Messages

Maybe you are looking for