Product updation in opportunity

Hi all,
I am using BAPI_OPPORTUNITY_CHANGEMULTI to update an existing opportunity.Using the BAPI I am able to update status.But I am facing problems while updating products.The BAPI is not returning any error message but poduct is not getting updated.Does any one know what parameters to be passed for product updation
Reward points will be awarded for helpful answers

Similar Messages

Error while entering product in Transactions- Opportunity and sales orders

Hello Friends,
I am facing a problem while entering products in Create opportunity screen with message no: COM_PRODUCT_SETTINGS001. I get the error as below.
Product ID is longer than the Customizing setting allows
     Message no. COM_PRODUCT_SETTINGS001
Diagnosis:
    The product ID 000000000000003115 contains more than 18 characters, that
    is, it is longer than the length defined in Customizing.
I tried changing the "Product output format and storage form" to maximum of 40 characters and tested it, the error still persists.
Though I created some opportunities with same product ids before, I only face this issue after system has been updated with some latest patches. Is this issue anything to with updated patches?
Appreciate your help on this.
Regards,
Suresh

Hi Harshit,
Thanks for the Relpy.
I did search relevant notes, but could not find anything related to CRM 7.0 version.
Regards,
Suresh

Having trouble identifying if a product update is installed

Hi All,
I need to ensure that I'm not vulnerable to this advisory http://sunsolve.sun.com/search/document.do?assetkey=1-66-101782-1. I do have SunMC 3.5 installed (verified with "pkginfo -l SunMC", but the advisory specifically states that 3.5 is not vulnerable, only 3.5 update 1 or update 1a. How can I check if update 1 or update 1a is installed? My best guess would be to check the revision number, but how can I tell what the revision numbers for 3.5 update 1 and 3.5 update 1a are? If product update 1 is installed, is it possible the version number would be 3.5pu1 instead of 3.5?
Thank you all for your time in advance.

I suppose you allowed the opportunity to purchase AppleCare expire as well. In that case how Apple handles it if there is a repair is to charge you.

Problem in Product Update

Hi All,
I am facing a problem in product updation.I am using maintain FM to update Product in sap crm 2007. after that I am using COM_PRODUCT_SAVE_API.This API takes a lot of time to update only one set type .When I debug this API ,there is a badi FM (COM_PR_CHBADI_CHANGE_AFTER_UPD )which is used in this API is taking time.I tried to remove this badi by creating Z API to save Product but Product is not updated with new values.Please tell me any solution for the same..
Regards,
Hem

Hi Hem,
I faced this issue with CRM 5.0 couple of years back. We didn't get any solution at that time other than to update the set type tables with direct table updates.
I thought in higher versions this issue would have been resolved, but i guess not. If you find any solution, please do share.
Regards,
Shyamak

I can't use iTunes! (Accidentally exited apple product updater in the middle of iTunes upgrade)

So I was installing the most recent version of iTunes (11.1.3 or something) with the Apple Product Updater and it was taking forever to install. I decided to exit becuase I had other things to do in iTunes which had closed due to the installation process. To speed up the process I brought out Task Manager and just ended the task and it disappeared.
Now iTunes is gone from my normal app search and if I go into the C:// Drive I can open iTunes with the iTunes folder located there (it doesn't have some file that lets it communicate with my device) but the iTunes folder in C://Program Files is completely wiped and I don't have access to it even though I'm the administrator of my computer with all-access. I opened the properties of the folder and it's 0 bytes. I tried uninstalling it via Control Center but unfortunately it encountered the same problem; it said I needed access to the C://Program Files/iTunes folder.
There was a try again button but no option to override with administrative functions. I tried deleting the folder in the C://Program Files but I had no access. Is there ANY WAY out of the situation without a complete OS reset? Please help.
If you want I can provide images of anything you like.

Does this help anyone? Can anyone tell if anything's missing? Because for the moment the whole of iTunes is rendered unusable for me.

I just installed Creative Suite v 6.0 Master Collection and downloaded all product updates - I tried

I just installed Creative Suite v 6.0 Master Collection and downloaded all product updates - I tried opening a document created with InDesign v9.x Cloud version and I get an error that do not have the latest... what is going on here?

CS6 Master Collection is the last perpetual licensed product. The files created with CC version of Adobe apps are not, in many cases, compatible with CS6 versions.
Is there some reason you thought they were?

Product updates via API cause release date to be changed

When running product updates via the eCommerce API (Product_UpdateInsert) the release dates for the updated products are being set to 02-Jan-2000. Is this happening for anyone else?
This is kind of painful as we have a client who uses the product release dates throughout their site...

Ran into the same issue. I was using the release date to flag latest products, regardless of ordering. Unfortunately running a product import then destroyed all that work.
Found this thread with a staff reponse regarding it not being possible to set release dates using import, but it doesn't explain why release dates get reset.

C510 won't do a product update

When I first used the printer, I did 2 product updates. I then downloaded the froyo beta and the setup for that would crash so I reset the device with the volume/power buttons.
I'm now on a fresh build and trying to do the second product updates. When i click "check for updates now", I get a error saying "product update unsuccessful! could not connect to server. please check your internet settings and try again."
My internet connection is fine. Other apps can use it just fine. Any ideas?

I just got off with Tech support. I updated to the 2.2 and then my wireless icon and my settings icon disappeared on my zeen tablet. When I tried to update, i got a message saying the printer was not available on the network. I could not sync the printer and the zeen and I could not scan using the zeen. I tried a hard reset and then I could not get past the 'continue' button on the product setup wizard page. I was told that the problem is with the Zeen and they are going to replace it. I will NOT be doing a firmware update on the new one - this was the second tablet I had problems with.

How to disable product update on Cisco AnyConnect mobility client

Hallo,
Do you anybody know how to disable/turn off "Checking for product update" during _every_ connecting Cisco Anyconnect Secure Mobility Client (VPN) to remote sites?
I found it may by possible on the ASA side, but I need to disable it on the client (computer). I can see that checking is NOT during connecting to my company site, but when connecting to ANY OTHER site everytime is new version checked. It takes some time ... and I need to switch between VPN often.
Thank you for your help!
Regards, Ondrej

You should be able to do this in the AnyConnect local policy. Just add (or edit, if you already have a local policy file) the following to the local policy file:

<anyconnectlocalpolicy acversion="2.4.140" xmlns="http://schemas.xmlsoap.org/encoding/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemalocation="http://schemas.xmlsoap.org/encoding/ AnyConnectLocalPolicy.xsd">
<BypassDownloader>true</BypassDownloader>
</AnyConnectLocalPolicy>
The local policy file can be found here:
Windows Vista/7/8: C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\AnyConnectLocalPolicy.xml
Linux/Mac: /opt/cisco/anyconnect/AnyConnectLocalPolicy.xml
See the Enabling FIPS and Additional Security in the Local Policy section of the Cisco AnyConnect Secure Mobility Client Administrator Guide, Release 3.1 for more details.

Can anyone out there convince Adobe to stop including McAfee by default on its product updates?

Adding additional (new) software should be an "opt in" not an "opt out". This is irritating. I don't always catch and uncheck that option during product updates (like Flash)

In a user to user forum, it's unlikely that you'll find anyone with any influence over such decisions.
The opt out link is undoubtedly the subject of a commercial agreement between McAfee and Adobe so I suspect it's there to stay until the agreement expires - whenever that may be.

How so I download LR 4.2 product update?

I have tried repeatedly to download the product update lightroom 4.2 without sucess. I have a very good broadband signal, but the connection bogs down with the starting procedure. Eventually I get 42.5k version of Lightroom_4_LS11_win_4_2.exe which Windows 7 can't open. The file is supposed to be 751MB. My procedure: open LR4, go to help> check for updates>Update 4.2 is available>download>http://www.adobe.com/support/downloads/detail.jsp?ftpID=5488>Proceed to download>Download Now>Save File> Tell it save in my Downloads folder and then it stalls on starting. Any clues?

Thanks for the suggestion Nikhil. I finally was able to do a live chat with an Adobe tech person, who said the problem was likely do to my anti-virus program. She suggested I disable it temporarily and then download the update. I tried and it went a little further but then stalled again. In a couple weeks I will be in a place with superfast internet and will do it then.
What seems odd is that Adobe doesn't zip these files or use an installer file program (with a different extension). .exe extensions are notorius for viruses and anti-virus programs thus target them.
I also found it very hard to reach an Adobe person, the first number I tried, had a 2+ hour wait but said they'd call me back if I scheduled it - never got the call. This page had more available helpers (3o minute wait) plus immediate live chat help. It's here: http://helpx.adobe.com/contact/
Tom

Any work on the "Product Update Wizard"?

Hi,
As probably the NI engineers are aware, some of us have problems using the “Product Update Wizard” from MAX, if we are on a corporate LAN using secure Internet access.
More specific, if one is on a corporate LAN that uses a proxi server on a non-standard port (let’s say 3128), that also requires a username / password for Internet access, than the “Product Update Wizard” will fail to connect to the NI webserver.
Most other application would pop up a window, prompting for user / password, however the “Product Update Wizard” will just say “Unable to communicate with National Instruments web servers – update check failed.”
Of course, trying to suggest to the IT department to change the Internet access policies for the whole company to get LabVIEW to auto-update would probably get you nowhere. Also, if one has many NI products / toolsets, trying to keep them up to date manually starts to become quite challenging.
Therefore I was wondering if a solution is available, even if it involves registry editing or any other trick.
Thanks a lot,
Sorin

Hi Sorin,
When you try to use the update wizard and it fails, it should create a htm file called max.htm or similar (I can't give you the exact filename as when I use the update wizard it works OK and therefore doesn't create this file.
Try running the update wizard and when it fails, then go off and do a search on your hard drive for max.htm or max.html or anything similar. If you can find it then run the htm file and you should be able to run the update wizard through there.
If this doesn't work, then please feel free to get back in touch with me and I will investigate other ways we can try and get this working.
Best regards,
Peter H.
Applications Engineer.
NIUK.

SCCM patches-Adobe product updates

I am looking for information on how to configure SCCM for Adobe product updates. I've been told that SCCM can only be used to deploy 'major' Adobe updates, i.e. Adobe Reader version 9 but not 9.1, 9.2, etc. Is this true? I can't imagine that companies are updating their Adobe products (Shockwave player, Flashplayer, Reader) one computer at a time. If anyone can direct me to any technical resources on how to configure Adobe updates with SCCM, I'd appreciate it so I can work together with our Network Administrator to send out updates regularly. Thank you.

Hi,
SCCM 2007 is the next version of SMS(2003) and can be used for patch management also alongwith software distribution, operating system deployment, network access protection, and hardware and software inventory.
But it is recommended that you deploy the updates through SCUP/WSUS to SCCM. For that you need to setup a WSUS and SCUP along with SCCM server. WSUS is used to publish Microsoft updates to SCCM. For custom updates (from Independent S/W vendors) you need SCUP which will sync with WSUS and then the updates are available at SCCM.
You need to get the catalog for Acrobat/Reader and publish them through SCUP to WSUS. SCCM will sync the updates from WSUS. From SCCM the updates can be deployed to various clients.
Thanks,
Vinod

Do you push non-security patches? (i.e. hotfixes, product updates, etc.)

I work for an organization with about 11,000 computers, and we are switching from Altiris/SMP to SCCM. We've always struggled with pushing patches in SMP, and have experienced a lot of issues with their patching product (especially lately). Now I've always
been a big proponent of preventive maintenance, so I have always been on the side that we should push hotfixes, and product updates, along with security related patches. Unfortunately we have had a bad spell with patching lately, and I am starting to rethink
this strategy.
I was curious what the general consensus is. We don't have a lot of time for patching, and I am worried the issues with non-security patches are going to distract us away from patching that really is critical. Basically consider anything that has
a severity rating of 'none'.
So what is the general consensus; do you only push security updates, or do you push non security updates too?
Appreciate your time.

in our organisation (45,000 workstations), we adopted ConfigMgr and Windows7 at the same time.
(we migrated from WinXP and HP CA / Radia).
When we did this, I made the decision "if there's a patch in the catalog, and it's Required on at least 1 PC, we will acquire/test/release it".
This doesn't include "hotfixes" since those aren't published into the WSUS feed from MU, nor does it include "CU's" for Office.
(Almost) Everything in the feed is what we do, as long as it passes our testing protocols. Some things, we skip. (stuff like MSRT and CheckSUR). We also skip stuff that doesn't apply in our locale (Australia), e.g. the EU stuff, and Japanese pop words dictionaries.
We have Win7, Win8.0, Win8.1. 32bit and 64bit. Office 2007/2010/2013. We have IE8/9/10/11. We have no WinXP.
I don't cover patching for WindowsServer (that's a different team, and they don't use ConfigMgr at all).
It seems to me (and I'm convinced that I'm not alone), that MSFT have accelerated the release cycle of a lot of patches since Win8 was released, largely dropped the concept of ServicePacks, and, there are shorter cycle-times now (which surely must mean there
is less testing being done at MSFT).
So I'm not overly surprised that in the last 6 months there have been quite a few patches released then withdrawn then revised.
Even those with Security/Severity ratings.
I'm still in favour of releasing non-security updates to our estate, so that's what I do.
But, patching = change, and change=risk. Some risk mitigation is addressed by testing, but we can't test every feature of everything.
Not patching is also a risk. (how long will you put up with the internal noise about those really annoying defects?)
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

How delete one product of a opportunity with WebService?

Hi
I know to insert a new product in a opportunity with webservice (with ListOfProducts of opportunity.wsdl) but, how i can delete one product of a opportunity?
Thanks,
Ivan

This is my code:
crm.oportunidad.Opportunity oportunidad = new crm.oportunidad.Opportunity();
OpportunityWS_OpportunityDeleteChild_Input qbe = new OpportunityWS_OpportunityDeleteChild_Input();
OpportunityWS_OpportunityDeleteChild_Output qRet;
qbe.ListOfOpportunity = new Opportunity1[1];
qbe.ListOfOpportunity[0] = new Opportunity1();
qbe.ListOfOpportunity[0].ListOfProduct = new crm.oportunidad.Product[1];
qbe.ListOfOpportunity[0].ListOfProduct[0] = new crm.oportunidad.Product();
qbe.ListOfOpportunity[0].ListOfProduct[0].ProductId = psProductoID;
oportunidad.Url = string.Format(surl, getInstancia(),sSessionID);
oportunidad.CookieContainer = GetCookieContainer();
qRet = oportunidad.OpportunityDeleteChild(qbe);
And this is the error:
No se puede utilizar una clave de usuario para la instancia de componente de integración 'Opportunity_Product'.(SBL-EAI-04397)
When i try to add products i have the same error code
Any idea?

Product updation in opportunity

Similar Messages

Maybe you are looking for