Product User Assessment Survey: Have your say!
Hi all
The User Design and Research Team is calling for your feedback on our products and we are listening hard.
Please just take a few minutes to check out this article with details.
Thank you in advance!
Community Advocate Program Manager
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
I have a need to supply a guest network, ideally without introducing additional APs. I have APs that can have additional SSIDs with their own VLANs. I have a router that is not VLAN-aware, but has two physical ports, one of which is for the corp network and the other for the guest (the router ports are isolated). Everything connects through a switch that is VLAN-aware.
What I'd like to be able to do, is connect both ports from the router to the switch, and configure so that VLAN2 can only communicate to the guest port on the router. And the default VLAN (VLAN1) can only communicate to the default VLAN ports on the switch.A picture is worth a lot more:DLink switch is a DGS-1210-24.I'm getting confused between VID, PVID, 'tagged', 'untagged', and 'not a member', and asymmetrical/symmetrical VLANs.
I think what I want is:- enable...
Similar Messages
-
Product Ownership Assessment Survey - Have your say!
Hi all
The User Design and Research Team is calling for your feedback on our products and we are listening hard.
Please just take a few minutes to check out this article with details.
Thank you in advance!
Community Advocate Program Manager
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество@ Onepamopa - thank you for voicing out. I really thought I was one unlucky customer and one of a few to experience such inconvenience and distress over a product and design that Lenovo took pride in. I too have spent 1 month trying to solve the problems with a brand new Lenovo Yoga Pro 3. I am now using laptop number four of the same model in 1 month, a proof of my blind faith in this product and increasing disillusionment....and deludedness... I was already advised by friends and colleagues, after laptop 1 that I should perhaps change brands... Objectively speaking, the after sales service i.e. technical and service support were very helpful, however, when purchasing a brand new product you wouldn't think you'd have problems already from hour 1. Front line and customer service attitude were less than professional and frankly quite rude. I was lucky that I'd purchased through a retailer...otherwise my brand new laptop would be out of the shop and sent straight to repair. @ Limpaar - also thank you for sharing your point. I thought it was great when this assessment came out (though also somewhat ironic)... that there was a channel where I could communicate with Lenovo...where customers' views would be valued and heard... I then was filtered out on the second page and that was the end of that... Is there a Lenovo representative online? I'm not one to cry online without first assessing and taking alternative steps to solve the problem...I have been co-operating and I'd say pretty patient... Lenovo.... where are you?... Those that do...
-
Product Owner Assessment Survey - Have your say!
Hi all
The User Design and Research Team is calling for your feedback on our products and we are listening hard.
Please just take a few minutes to check out this article with details.
Thank you in advance!
Community Advocate Program Manager
English Community Deutsche Community Comunidad en Español Русскоязычное СообществоI have a need to supply a guest network, ideally without introducing additional APs. I have APs that can have additional SSIDs with their own VLANs. I have a router that is not VLAN-aware, but has two physical ports, one of which is for the corp network and the other for the guest (the router ports are isolated). Everything connects through a switch that is VLAN-aware.
What I'd like to be able to do, is connect both ports from the router to the switch, and configure so that VLAN2 can only communicate to the guest port on the router. And the default VLAN (VLAN1) can only communicate to the default VLAN ports on the switch.A picture is worth a lot more:DLink switch is a DGS-1210-24.I'm getting confused between VID, PVID, 'tagged', 'untagged', and 'not a member', and asymmetrical/symmetrical VLANs.
I think what I want is:- enable... -
Product Ownership Assesssment Survey: Have your say
Hi all
The User Design and Research Team is calling for your feedback on our products and we are listening hard.
Please just take a few minutes to check out this article with details.
Thank you in advance!
Community Advocate Program Manager
English Community Deutsche Community Comunidad en Español Русскоязычное СообществоI have a need to supply a guest network, ideally without introducing additional APs. I have APs that can have additional SSIDs with their own VLANs. I have a router that is not VLAN-aware, but has two physical ports, one of which is for the corp network and the other for the guest (the router ports are isolated). Everything connects through a switch that is VLAN-aware.
What I'd like to be able to do, is connect both ports from the router to the switch, and configure so that VLAN2 can only communicate to the guest port on the router. And the default VLAN (VLAN1) can only communicate to the default VLAN ports on the switch.A picture is worth a lot more:DLink switch is a DGS-1210-24.I'm getting confused between VID, PVID, 'tagged', 'untagged', and 'not a member', and asymmetrical/symmetrical VLANs.
I think what I want is:- enable... -
The team are building better software to help you manage print in any hosted environment. Take our quick survey for your chance to have a say on Cloud. surveymonkey.com/s/XXH9YLM
I have a need to supply a guest network, ideally without introducing additional APs. I have APs that can have additional SSIDs with their own VLANs. I have a router that is not VLAN-aware, but has two physical ports, one of which is for the corp network and the other for the guest (the router ports are isolated). Everything connects through a switch that is VLAN-aware.
What I'd like to be able to do, is connect both ports from the router to the switch, and configure so that VLAN2 can only communicate to the guest port on the router. And the default VLAN (VLAN1) can only communicate to the default VLAN ports on the switch.A picture is worth a lot more:DLink switch is a DGS-1210-24.I'm getting confused between VID, PVID, 'tagged', 'untagged', and 'not a member', and asymmetrical/symmetrical VLANs.
I think what I want is:- enable... -
Product Ownership Assessment Survey
Hi all
The User Design and Research Team is calling for your feedback on our products and we are listening hard.
Please just take a few minutes to check out this article with details.
Thank you in advance!
Community Advocate Program Manager
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество@ Onepamopa - thank you for voicing out. I really thought I was one unlucky customer and one of a few to experience such inconvenience and distress over a product and design that Lenovo took pride in. I too have spent 1 month trying to solve the problems with a brand new Lenovo Yoga Pro 3. I am now using laptop number four of the same model in 1 month, a proof of my blind faith in this product and increasing disillusionment....and deludedness... I was already advised by friends and colleagues, after laptop 1 that I should perhaps change brands... Objectively speaking, the after sales service i.e. technical and service support were very helpful, however, when purchasing a brand new product you wouldn't think you'd have problems already from hour 1. Front line and customer service attitude were less than professional and frankly quite rude. I was lucky that I'd purchased through a retailer...otherwise my brand new laptop would be out of the shop and sent straight to repair. @ Limpaar - also thank you for sharing your point. I thought it was great when this assessment came out (though also somewhat ironic)... that there was a channel where I could communicate with Lenovo...where customers' views would be valued and heard... I then was filtered out on the second page and that was the end of that... Is there a Lenovo representative online? I'm not one to cry online without first assessing and taking alternative steps to solve the problem...I have been co-operating and I'd say pretty patient... Lenovo.... where are you?... Those that do...
-
Product Owner Assessment Survey - we are listening!
Hi all
The User Design and Research Team is calling for your feedback on our products and we are listening hard.
Please just take a few minutes to check out this article with details.
Thank you in advance!
Community Advocate Program Manager
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество@ Onepamopa - thank you for voicing out. I really thought I was one unlucky customer and one of a few to experience such inconvenience and distress over a product and design that Lenovo took pride in. I too have spent 1 month trying to solve the problems with a brand new Lenovo Yoga Pro 3. I am now using laptop number four of the same model in 1 month, a proof of my blind faith in this product and increasing disillusionment....and deludedness... I was already advised by friends and colleagues, after laptop 1 that I should perhaps change brands... Objectively speaking, the after sales service i.e. technical and service support were very helpful, however, when purchasing a brand new product you wouldn't think you'd have problems already from hour 1. Front line and customer service attitude were less than professional and frankly quite rude. I was lucky that I'd purchased through a retailer...otherwise my brand new laptop would be out of the shop and sent straight to repair. @ Limpaar - also thank you for sharing your point. I thought it was great when this assessment came out (though also somewhat ironic)... that there was a channel where I could communicate with Lenovo...where customers' views would be valued and heard... I then was filtered out on the second page and that was the end of that... Is there a Lenovo representative online? I'm not one to cry online without first assessing and taking alternative steps to solve the problem...I have been co-operating and I'd say pretty patient... Lenovo.... where are you?... Those that do...
-
I've published a survey to gather information on how we can best help you become successful with Oracle ADF. Please take a few minutes to complete the survey. Details can be found on my blog
http://blogs.oracle.com/grantronald/entry/your_chance_to_change_the
Regards
Grant
p.s. feedback is that the survey works better with FireFox.Bump
-
Hi everyone
I'm a new iPad user (ipad2) and have tried to download a few apps. I already have a iTunes/app store account but often when I try download a app I get a message that says "your request could not be processed"?It could be a problem at the other end, try again tomorrow. Also , try resetting your iPad by holding down the home and sleep/wake button till the Apple logo appears and then let it wake up, maybe that may help.
-
Error msg: Current user does not have privileges to perform product Activation
I am running Adobe Photoshop CS 8.0 on Windows Home Vista platform.
I keep getting this error message when I try to open Photoshop:
Current user does not have privileges to perform product activation. Run this application from a user account with administrative privileges or contact your system administrator.
I am the only owner & user of this software. I have re-installed the SW once (full install), and the error message went away for a while.
Now it's come back.
What do I do now?2 options:
Either disable UAC (User Access Controls) or run the application with Administrator rights. -
Outlook 2010 cannot save to archive folders listed. Message says that message was already moved or that user doesn't have permission.
Hi,
Does this issue occur when you manually archive items in Outlook, do you drag them into the archive folder?
The first thing I wonder is if the .pst file has been corrupted, please run Scanpst.exe to repair the archive .pst file:
http://support.microsoft.com/kb/272227/en-us
Please logon your Webmail(owa), check if the emails are available. If the emails have been moved and Outlook Client hasn't synced yet, this issue may occur as well.
We can also create a new .pst file to archive the file, check if the issue persists.
For more information, we can refer to Archive items manually:
http://office.microsoft.com/en-in/outlook-help/archive-items-manually-HA010355564.aspx
When you browse to the archive file in step 5, type in a new .pst file name.
If my understanding is not accurate, please detail your scenario and provide the exact error message.
Regards,
Melon Chen
TechNet Community Support -
unable to update iPhoto it says I'm signed in as another user. I have tried two apple ids but neither of them work..
You need to contact App Store support. They are the only people who can help with account issues.
-
I have an older Ipod touch with 4.2.1 and cannot be updated any further, how do I install apps on it now? so far every app I have tried says I need an updated IOS. This sounds like I now have an apple product paper weight unless I want to run out and buy the latest and greatest overpriced apple product.
Are you willing to buy a newer iPod? How about the 4g @ 16gb for $199* usd or the 5g @ 32gb for $299*.
* tax not included. -
I have just opened my brand new Macbook Pro and I'm a first time mac user. I have tried to download flash to enable me to watch youtube clips, but on trying to download it, it says I need to close Safari but after doing so, it still won't respond. Any tips? Help?
Actually you need to quit Safari which is different from closing. With Safari open go the menu bar for Safari/Quit Safari.
Mac 101: Get Started Using A Mac -
Why does it say "The configuration data for this product is corrupt. Contact your support personnel." when trying to install itunes64installer on my b4 bit windows 7 acer pc? Any help would be much appreciated...
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?
Maybe you are looking for
-
Any external HDDs compatible with Tablet 2?
Hello everyone, Lenovo Solution Center is reporting that the 64 GB of storage in my tablet 2 is running out, and I would like to connect an external hard drive to it and move some programs and files to the hard drive to free up space in my tablet. So
-
Start using Java 7 in JDeveloper
Hi, I'm using the lastest JDeveloper and this might be a silly question, but how can i set it up to start compiling using Java 7 sdk? I tried preference but it doesn't have it there. Also, i'm guessing i need to do the same for my weblogic. -Marvin
-
Currency IDR becomes greater than the maximum price
Dear All We have error message (no 06217), when create PO, like bellow : ================= Net price in IDR becomes too large Message no. 06217 Diagnosis The calculated net price in currency IDR becomes greater than the maximum price ("99999999999")
-
Why has "coreservicesuiagent.app would like to access your calendar" just popped up?
Why has "coreservicesuiagent.app would like to access your calendar" just popped up on my iMac?
-
How can sort videos by name in my ipad
Hi IPAD team i need to sort files on my ipad by names or dates or dimensions , how can do that , its very important Thanks Regards