Product Ownership Assessment Survey

Hi all
The User Design and Research Team is calling for your feedback on our products and we are listening hard.
Please just take a few minutes to check out this article with details.
Thank you in advance!
Community Advocate Program Manager
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

@ Onepamopa - thank you for voicing out. I really thought I was one unlucky customer and one of a few to experience such inconvenience and distress over a product and design that Lenovo took pride in. I too have spent 1 month trying to solve the problems with a brand new Lenovo Yoga Pro 3. I am now using laptop number four of the same model in 1 month, a proof of my blind faith in this product and increasing disillusionment....and deludedness... I was already advised by friends and colleagues, after laptop 1 that I should perhaps change brands... Objectively speaking, the after sales service i.e. technical and service support were very helpful, however, when purchasing a brand new product you wouldn't think you'd have problems already from hour 1. Front line and customer service attitude were less than professional and frankly quite rude. I was lucky that I'd purchased through a retailer...otherwise my brand new laptop would be out of the shop and sent straight to repair. @ Limpaar - also thank you for sharing your point. I thought it was great when this assessment came out (though also somewhat ironic)... that there was a channel where I could communicate with Lenovo...where customers' views would be valued and heard... I then was filtered out on the second page and that was the end of that... Is there a Lenovo representative online? I'm not one to cry online without first assessing and taking alternative steps to solve the problem...I have been co-operating and I'd say pretty patient... Lenovo.... where are you?... Those that do...

Similar Messages

Product Ownership Assessment Survey - Have your say!

Hi all
The User Design and Research Team is calling for your feedback on our products and we are listening hard.
Please just take a few minutes to check out this article with details.
Thank you in advance!
Community Advocate Program Manager
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

@ Onepamopa - thank you for voicing out. I really thought I was one unlucky customer and one of a few to experience such inconvenience and distress over a product and design that Lenovo took pride in. I too have spent 1 month trying to solve the problems with a brand new Lenovo Yoga Pro 3. I am now using laptop number four of the same model in 1 month, a proof of my blind faith in this product and increasing disillusionment....and deludedness... I was already advised by friends and colleagues, after laptop 1 that I should perhaps change brands... Objectively speaking, the after sales service i.e. technical and service support were very helpful, however, when purchasing a brand new product you wouldn't think you'd have problems already from hour 1. Front line and customer service attitude were less than professional and frankly quite rude. I was lucky that I'd purchased through a retailer...otherwise my brand new laptop would be out of the shop and sent straight to repair. @ Limpaar - also thank you for sharing your point. I thought it was great when this assessment came out (though also somewhat ironic)... that there was a channel where I could communicate with Lenovo...where customers' views would be valued and heard... I then was filtered out on the second page and that was the end of that... Is there a Lenovo representative online? I'm not one to cry online without first assessing and taking alternative steps to solve the problem...I have been co-operating and I'd say pretty patient... Lenovo.... where are you?... Those that do...

Product Owner Assessment Survey - we are listening!

Hi all
The User Design and Research Team is calling for your feedback on our products and we are listening hard.
Please just take a few minutes to check out this article with details.
Thank you in advance!
Community Advocate Program Manager
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

@ Onepamopa - thank you for voicing out. I really thought I was one unlucky customer and one of a few to experience such inconvenience and distress over a product and design that Lenovo took pride in. I too have spent 1 month trying to solve the problems with a brand new Lenovo Yoga Pro 3. I am now using laptop number four of the same model in 1 month, a proof of my blind faith in this product and increasing disillusionment....and deludedness... I was already advised by friends and colleagues, after laptop 1 that I should perhaps change brands... Objectively speaking, the after sales service i.e. technical and service support were very helpful, however, when purchasing a brand new product you wouldn't think you'd have problems already from hour 1. Front line and customer service attitude were less than professional and frankly quite rude. I was lucky that I'd purchased through a retailer...otherwise my brand new laptop would be out of the shop and sent straight to repair. @ Limpaar - also thank you for sharing your point. I thought it was great when this assessment came out (though also somewhat ironic)... that there was a channel where I could communicate with Lenovo...where customers' views would be valued and heard... I then was filtered out on the second page and that was the end of that... Is there a Lenovo representative online? I'm not one to cry online without first assessing and taking alternative steps to solve the problem...I have been co-operating and I'd say pretty patient... Lenovo.... where are you?... Those that do...

Product User Assessment Survey: Have your say!

Hi all
The User Design and Research Team is calling for your feedback on our products and we are listening hard.
Please just take a few minutes to check out this article with details.
Thank you in advance!
Community Advocate Program Manager
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

I have a need to supply a guest network, ideally without introducing additional APs. I have APs that can have additional SSIDs with their own VLANs. I have a router that is not VLAN-aware, but has two physical ports, one of which is for the corp network and the other for the guest (the router ports are isolated). Everything connects through a switch that is VLAN-aware.
What I'd like to be able to do, is connect both ports from the router to the switch, and configure so that VLAN2 can only communicate to the guest port on the router. And the default VLAN (VLAN1) can only communicate to the default VLAN ports on the switch.A picture is worth a lot more:DLink switch is a DGS-1210-24.I'm getting confused between VID, PVID, 'tagged', 'untagged', and 'not a member', and asymmetrical/symmetrical VLANs.
I think what I want is:- enable...

Product Owner Assessment Survey - Have your say!

Hi all
The User Design and Research Team is calling for your feedback on our products and we are listening hard.
Please just take a few minutes to check out this article with details.
Thank you in advance!
Community Advocate Program Manager
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

I have a need to supply a guest network, ideally without introducing additional APs. I have APs that can have additional SSIDs with their own VLANs. I have a router that is not VLAN-aware, but has two physical ports, one of which is for the corp network and the other for the guest (the router ports are isolated). Everything connects through a switch that is VLAN-aware.
What I'd like to be able to do, is connect both ports from the router to the switch, and configure so that VLAN2 can only communicate to the guest port on the router. And the default VLAN (VLAN1) can only communicate to the default VLAN ports on the switch.A picture is worth a lot more:DLink switch is a DGS-1210-24.I'm getting confused between VID, PVID, 'tagged', 'untagged', and 'not a member', and asymmetrical/symmetrical VLANs.
I think what I want is:- enable...

Product Ownership Assesssment Survey: Have your say

Hi all
The User Design and Research Team is calling for your feedback on our products and we are listening hard.
Please just take a few minutes to check out this article with details.
Thank you in advance!
Community Advocate Program Manager
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

I have a need to supply a guest network, ideally without introducing additional APs. I have APs that can have additional SSIDs with their own VLANs. I have a router that is not VLAN-aware, but has two physical ports, one of which is for the corp network and the other for the guest (the router ports are isolated). Everything connects through a switch that is VLAN-aware.
What I'd like to be able to do, is connect both ports from the router to the switch, and configure so that VLAN2 can only communicate to the guest port on the router. And the default VLAN (VLAN1) can only communicate to the default VLAN ports on the switch.A picture is worth a lot more:DLink switch is a DGS-1210-24.I'm getting confused between VID, PVID, 'tagged', 'untagged', and 'not a member', and asymmetrical/symmetrical VLANs.
I think what I want is:- enable...

PC 10.0: Print IELC assessment survey

We sent an IELC assessment survey to a number of organizations.
Now some of the receivers would like to print the completed survey (i.e. including answers).
It appears that there is no print functionality.
Your ideas and comments are highly appreciated.
Thomas

Thank you!
Where would I find this audit trail link in GRC 10?
Do I need to activate it?

PC 10.1: Download IELC assessment survey

We sent an IELC assessment survey to a number of organizations.
Now some of these receivers would like to download the completed survey (i.e. including answers).
It appears that there is no download functionality.
Your ideas and comments are highly appreciated.
Thomas

Hi
Please check with your webdynpro consultant. Download functionality can be customized.

Product ownership

I am doing a lot of opportunity-product history reporting using custom fields in the 'Owned by User' section to add extra information about the opportunity owner
In the opportunity-product history the Owned by User relates to the product owner and not the opportunity owner. This is fine when specific products have been created by the user but I am having big problems where no products have been specified yet.
Unlike other posts here I want to report opportunities with 'Unspecified' products
My reports are going wrong where the 'owner' of the Unspecified' product does not agree with the opportunity owner
My tests suggest the person who created the opportunity is not automatically the owner of the Unspecified product
Does anyone know HOW CRM on Demand decides who the owner of the Unspecified Product should be?
So far I have reviewed over 100 opportunity records and it is definitely not always teh person who created the opportunity. There seems to be a link with opportunity and account teams but nothing I can put my finger on....

Thanks Tim
The reports contain custom fields in the 'Owned by User' section. Its not a case of displaying the owner but extra information about the owner
We need to understand how the ownership is assigned or how to change ownership of the Unspecified product
Best wishes
Richard

X240, T440 case design frustrations

It is difficult to sum up the frustration in dealing with this new X240 and T440 case design. I can't believe I am no longer able to swap a hard drive or update memory without taking apart the case. Replacing the keyboard is next to impossible where it used to take about 5-10 minutes on older models.
Yes, I realize this is a statement and not a question. I hope the X250 and T450 have incorporated some of the older design features that made it easier to swap parts.
I will give Lenovo credit with the internal battery. It is a very cool feature to be able to swap a battery on the fly.
Solved!
Go to Solution.

Hi bquinn620, welcome to the forum.
Lenovo would like to hear from you. You could follow the links here, and actually "have your say" in the product development.
https://forums.lenovo.com/t5/X-Series-ThinkPad-Laptops/Product-Ownership-Assessment-Survey-have-your...
Cheers
DragonRider
I'm DO'ing IT
Lenovo Y470 085525U 2nd generation Intel® Core™ i7-2630QM processor ( 2.00GHz 1333MHz 6MB )
IdeaCentre A520 Intel® Core™ i5-3230M processor ( 2.60GHz 2600MHz 3MB )
YOGA Tablet 2 Pro-1380F
X1 Carbon 2nd Gen (20A8) ThinkPad + T420

JDeveloper 10g Web Development Survey

Attention JDeveloper Web developers!
The JDeveloper product management team is currently conducting a JDeveloper 10g Web development survey.
All JSP, UIX, Struts and JSF developers using JDeveloper 10g are encouraged to fill out the survey and get a chance to win an Amazon gift certificate!
http://www.oracle.com/technology/products/jdev/temp/survey.html
-Chris
JDeveloper Product Management

JDeveloper will only directly support deployment of web services to an Apache 2.2 Web Server.

CRM Survey result Table

Hello CRM Experts,
We have assigned survey to Transaction ( Activities , Lead , Opportuninity ) . Transaction is being created and Questionnaire ( Survey ) is filled . Then Transaction is saved . Transaction ID is generated . We want name of the Table in which survey Results (answers) are store.
As we get the tables for Questions of surveys.
We not able to find the tables where all surveys Results (i.e may filled by Business Partners,Users etc) are store.
Please suggest.
Regards.
Anup.

HI Anup,
The list of all tables used in surverys are as follows
CRM_SVY_DB_MT                  CRM Surveys: Media Type
CRM_SVY_DB_MTT                 CRM Surveys: Media Types (Text Table)
CRM_SVY_DB_S                   CRM Surveys: Survey
CRM_SVY_DB_SA                  Survey Applications
CRM_SVY_DB_SAD                 CRM Surveys: Survey Application Descripti
CRM_SVY_DB_SD                  CRM Surveys: Survey Description
CRM_SVY_DB_SET                 CRM Surveys: Text Table for CRM_SVY_DB_SE
CRM_SVY_DB_SEV                 CRM Surveys: Input Help Table for Function
CRM_SVY_DB_SFA                 CRM Surveys: Survey File Access
CRM_SVY_DB_SP                  CRM Surveys: Generic Survey Attributes
CRM_SVY_DB_SSC                 CRM Surveys: Survey Schema
CRM_SVY_DB_ST                  CRM Surveys: Survey Template
CRM_SVY_DB_STS                 CRM Surveys: Survey Transformation Select
CRM_SVY_DB_SV                  CRM Surveys: Assessable Survey Values
CRM_SVY_DB_SVS                 CRM Surveys: Survey Values
CRM_SVY_DB_SVT                 CRM Surveys: Survey Value Template
Thanks
Abishek

CRM Survey Rating Table

Hi Experts,
Could you provide me SURVEY RATING TABLE NAME on basis of question and answer ?

hi
these are tables meant for you
CRM_SVY_DB_S - CRM Surveys: Survey
CRM_SVY_DB_SA - Survey Applications*
CRM_SVY_DB_SD - Survey Description*
CRM_SVY_DB_SFA - Survey File Access*
CRM_SVY_DB_SP - Generic survey attributes*
CRM_SVY_DB_SSC - Survey Schema*
CRM_SVY_DB_ST - Survey Template*
CRM_SVY_DB_SV - Assessable Survey Values*
CRM_SVY_DB_SVS - Survey Values*
CRM_SVY_DB_SVT - Survey Value Template*
CRM_SVY_RE_ANSW - Survey Texts (for BW extraction)*
CRM_SVY_RE_APPL - BW Application*
best regards
ashish

Attaching Survey to an Activity

Hi,
I have a rather interesting problem that I am trying to resolve. Perhaps somebody has an idea.
We have a BSP Survey on the the Company's external website which is filled out by customers who register new products. This survey contains a hidden field which holds the Business Partner number. When the survey is "submitted" from the website, it gets correctly posted in CRM 4.0 in CRM_SVY_DB_SV and I can get to the survey values (including the BP number). The functional requirement is to programatically create an Activity which also displays the values of this survey on the "Questionaires" tab.
Creating the "Activity" is not the real problem, but how do I link/attach/reference the survey to the Activity?
Greetings
Frank Deijkers

Thanks a brody
I had the same question. xx You dont happen to know how I set it up so it does it consistently, rather than on an individual email basis?
Thanks
Lisa

DHCP Security threats,Mitigation and Assessment

Hi,
I am doing networking project on DHCP security threats,Mitigation and assessment. I am including dhcp snooping ,am researching on Understanding DHCP communication,Security issues in DHCP protocol and communication,DHCPattacks,DHCP Starvation attack,Mitigating Attacks,DHCP Snooping,Port-Security,Recommended product,DHCPvulnerability assessment,Rogue DHCP Server detection,DHCP Starvation assessment.
Do anyone have better idea what else to include in this networking project.How to make it more better. do anyone have any document or any other resource where can i CAN get information about this project so that I can research little more.
thanks

I'll try to cover as much as possible, as this should be posted in a security forum, and the security issues can go to very deep levels.
1. Users: need to have direct access to the exchange servers only from the internal network.
2. Anti-Virus on the server it's self and on all the users clients.
3. Using a front-end to publish the Exchange OWA and RPC over HTTPs to the outside (using ISA server)
4. Have a firewall (can be configured very specificaly to allow access only to what you need)
5. Have a Mail-Relay appliance to perform the initial anti-virus and anti-spam
6. If data leak is an issue, you can also install a DLP solution
I'm sure there is more, but those are the main things.
Yanir Ben-Nun / System Team Leader / IT / IS Professional

Product Ownership Assessment Survey

Similar Messages

Maybe you are looking for