Production order - Backflush items

Hi,
How to reversal the Production Order compoent Backflush items
we are cancel the confirmation for that all operation in that production order, Backflush items not reversed.
All material set Backflush for material master MRP view 2
pls advise how reversal Backflush compeonets items
Regards,
Sankaran

Hello Sankaran,
In general if you do the confimation cancellation, the backflushed comonents will also be reversed with 262 Movement.
Why these components not got reversed?
whether COGI entry i there? Is there any Process Control, Post processing defibed for this?
If not, you please reverse the Components with 262 Movement with MB1A Transaction.
Regards,
Siva

Similar Messages

  • Notification on Receipt and Purchase documents getting fired on Production order having Items with planning method as MRP

    I have written a SP Notification to block adding of documents if block number is not provided. Notification is working fine on Purchase and Receipt documents. This notification also gets executed on Production Order where items included in Production order have planning method as MRP.
    Can anyone explain me the relationship between
    "MRP planned items"
    and
    "Purchase documents (Purchase Order; GRPO; Purchase Return; AP Invoice and Credit Memo) and Receipt of Production."
    Thanks & Regards
    Sonil Bhardwaj

    Hi Sonil,
    Can you post your SP , to look if there is any problem with SP ..
    Regards

  • Production Order backflush does not occur

    Hi Gurus,
    PLease help on the below issue.
    In my company, all the components in the production are using backflush. When GR the production order,  the backflush will be automatic.
    Issue is we found one order did not backflush after GR. Other orders with same material did backflush well.
    I checked the reservation agains the problem order, I found the only difference is that the reservation item is from 10.
    The item number of reservations in those good orders is from 01.
    I am not quite sure if this is the reason.
    If it is, how system worked like this and how to resolve it, please suggest.
    If i am wrong, please direct me the right way.
    Thanks for your help.
    Bryan

    Hi Bryan
    1.Check whether you have set backflush ind for all those material or not. if set then check COGI.
    2.This case arises if you are doing backflush through customizing i. e. through oder confirmation parameter you set Goods mov All comp is set. Then you wont required backflush to be set in Material master but at the time of confirmation if dont go to goods movenent screen then this material will not be backflush.
    Check it out
    Regards
    Abhijit Gautam

  • Production order backflush - Batch determination

    Hi,
    We are following discrete manufacturing with backflush setup for auto GI of materials.
    The entire flow is functioning smoothly, like
    1. Creation of production order & release to production.
    2. Auto goods issue upon first operation confirmation.
    The qty of goods issue is automatically taken from component qty in the order. This works fine for some materials with out any Batch information.
    Where as for those materials require match information, upon order confirmation system throughs an error
    1. "Error in material 75-106674A41 order 8200019041 item 0001"
    2. "Enter Batch"
    Confirmation is through, after we enter the batch details manually.
    How to auto determine  the batch information. Is there any setting that will eliminate the manual batch input.
    Please help and provide me  the steps / setup required to AUTO select the batch details.
    Thanks in advance.
    Raj.

    Hi,
    you have to configure the foll settings in IMG for the batch determination to happen automatically.
    IMG – Logistics general - Batch management – Batch determination & batch check  – strategy types
    1.Define prod order strategy type –
       (you can use CO01 - assign Class type : 023  & name of the class here , also assign sort rule created in step4 CU70 here )
    IMG – Logistics general - Batch management – Batch determination & batch check  – Batch search procedure definition
    2.Define Prod order search procedure (you can use CO0001 in std)
    IMG – Logistics general - Batch management – Batch determination & batch check  –
    Batch search procedure allocation & Activation check
    3.Assign the search proc to prod order and activate check (same as OPL8)
    IMG – Logistics general - Batch management – Batch determination & batch check  – Define sort rules
    4. Create sort sequence CU70
    5. Create Batch search Strategy  COB1 & Assign Sort rule here
    Now you can trigger batch determination in Prod order.
    Regards,
    Sheik

  • Production Order backflush creating Negative in Storage Type

    Hi All,
    We have setup storage types into which stock is replenished based on Min/Max. These storage types have been setup in a control cycle and supply area to backflush upon confirmation of the production order.
    I know this is user error, but when doing confirmation (CO15) or clearing COGI the user enters a batch not in one of those storage types (but available at IM level), it creates a negative in these storage types for that batch even though the storage types are setup NOT to allow negative stock.
    Is there any other setting or any notes that can be applied to avoid this issue?
    Thanks
    J

    OSS note 489754:
    The settings in Customizing which define that no negative stocks are allowed for the storage type, have only an effect on the transfer orders. In addition, you must also set message L9040 as an error message. For this, call up the Customizing and branch to: 'Logistics Execution -> Warehouse Management -> Interfaces -> Inventory Management -> Allow negative Stocks in Interim Storage Types'. There, execute point 'Control of System Messages in Warehouse Management' and enter message type 'E' for message number L9040.

  • Production order line item data

    Hello All,
    I am working on production orders co03 rite now.
    I want to access the line item data for a particular order,
    AUFK and AFPO  are not giving the details i need,
    please advise,
    thanks,
    Gaurav

    Dear Gaurav,
    U shud try the Table AUFM to get the details u r looking for.
    U will get your required output.
    Reward points if u feel it was helpful
    Regards
    Srinivasan

  • In production order backflush  how components select valuation type

    Hi,
       i am using backflush in production order planning where components have valuation type. when i stage them i give the valuation type. but when i confirm a operation the backflush is giving problem.
      the problem is i have to enter the valuation type of componet which has to be backflushed. is there any provison to make it as default. which valaution type componenet is staged it has to be backflushed automatically.
    thanks in advance
    regards
    madan

    Madan,
    During MF60-pull list where exactly do you enter the valuation type?
    Try to understand the concept?
    Let us say i have storage loc A and production storage loc B.
    Now in production order/REM order you have entered the storge loc as B and you have stock in A.
    After running MRP and when you goto MF60, for that component, system will create storage loc order during staging.
    Once it come into storage loc B, how system will identify the stock that it is reserved for this order?
    If you have eneterd valuation type(I could not find), once it is in storage loc B, is there any identification for that order in storage loc B.
    Please come back so that I can help you?

  • Collective Production Order for ITEM hierarchy

    Hello All,
    I have a Sales Order , with ITEM 10 XYZ (which is text material (does not have MRP views))
    Below it ihave 2 items
    20 pqr
    30 abc
    Both are assigned as SUB items to higher level  item 10.
    Part 2.
    I now try to create a Production Order (co07),
    When we create a PO for a Given Sales Order it normally
    expands teh BOm item and creates a network of PO for Sub items. (Also allocating the Lead PO number under assignment Tab for child items).
    Unfortunely in this case it does not behave like that , as it is not a BOM item (i.e 10).
    If i want the same behaviour even in this case what all i need to do ..
    F1 Please!!
    Manohar

    HI ALL,
    HOW TO ASSIGN A SUB PRODUCTION ORDER TO AN EXISTING PRODUCTION ORDERß
    Vielen Danke!!
    Manohar

  • About production order & phantom item

    Hi experts,
    I made a BOM containing several phantom items which are virtual items and don't have any stock. then I made a production order, SBO appears an error, "This product contains components which are phantom items, you must define the BOM for these items."
    that seems i can't directlly use phantom items in production orders, I have to make a BOM for those phantom items and use that new BOM, is that right? or are there any methods to let production order contain phantom items?
    Thanks...
    PS, one of my phantom item is gummed tape.

    A Phantom item is more for structural purpose and it should contain child items and must be defined as a BOM.  The child item will be issued to jobs when a Production Order for the Parent Item containing the phantom item is created.
    Suda

  • Post to Cost Centers on Production Order Backflush

    I have a question.
    Is it possible to post Goods Issue (Backflush) of components to a Cost Center when doing this via the Production Order Confirmation?
    Normally, when the components of a Production Order are backflushed, instead of posting to a cost center, they post to the Production Order.
    My intention is to use the Cost Center from the Work Center assigned to the Operation in question.
    Is this possible?

    dear Fernando,
    the cost center which u r using for the work center to capture the operation cost only. Ur GI is taking automaticaly with ur confirmation, and goods are getting posted to order. finally the cost which is costing for that work center usage is also go order only.
    if u dont want material cost to flow to order u tick all for all component materials as bulk material in MRP view and issue material aganist cost center in MB1A with mov. type 201 and do the confirmation, so GI will not take place to order.
    i hope this will clear ur doubt
    sree

  • Tables for Production order BOM item Details

    Dear all,
    I am new to PP Module i want know table where we can find BOM quantites used against Production.
    Also Please help me with table Structure of PP Module.
    Regards,
    Gaurav Sood

    Hi can you please tell how link this table with AFPO table
    STLTY     STLTY     CHAR     1     0     BOM category
    STLNR     STNUM     CHAR     8     0     Bill of material
    STLKN     STLKN     NUMC     8     0     BOM item node number
    Regards,
    Gaurav

  • Production Order quantity should be same as Sale order line item qnty

    Dear experts
    we have one user requirement as such
    Production Order  line item quantity should be same as Sale order line item qnty.
    suppose for SO Line item he is ordered 100mts,Production of this paricular Line item should also be 100mts it should not be more than this,How to satisfy his requirement.
    Regards
    Sandeep patil

    Hi,
    If the Manual intervention is eliminated for processing of the data then the SO Line Item Qty will be equal to Production order Qty.
    Background Jobs for MRP Run, Planned Order to production order cretaion will help you to manage this, along with effective Authorization Management.
    Regards,
    Siva

  • Serial number error while creating the production order

    Hello frds,
    I am getting the following error while creating the production order.
    "Item 000000 requires exactly 100 serial numbers for the asset".
    If i give 100 serial numbers in the order, the error is solved. But i do not want to assign 100 serial numbers, i want to assign only 2 numbers.
    I have tried using the new serial number profile also, but it is giving same error.
    Kindly guide.
    Regards,
    Narendra Bora

    Dear Narendra
    Select the serial number profile and go to serialization procedure and set the ser. usage status 02 - Optional as below.
    Procd Procedure description Ser.Usage
    PPRL PP order release 02
    since the serail number creation is optional for order relase this will allow you to relase with out error and with serail number assigned in partial.
    Regards
    Soundar

  • Issue more than Planned in Production Order

    Hi All,
    I have a problem with 2007B SP00 PL11 for Issue for Production.
    In 2005B, I can issue the BOM Components more than planned. But in 2007B version, I am unable to issue more than planned. When I right-click at Production Order to Issue Component or at Issue for Production and copy from Production order. no items are displayed.
    I have already issued in full at the 1st issue. Then subsequently, i need to issue some more qty for certain components. But i am unable to do that.
    Has this feature of issue more been changed in 2007B?
    What other method can be adopted without changing the planned qty?
    Please advise.
    Regards
    Jessie

    Hi guys,
    Thanks for the fast response.
    Duplicate the previous issue to create the over-issue is not a good solution. It is very troublesome. itis not a good procedure to ask customers to do this step.
    Changing of the planned qty will mean that i am not able to trace my initial plan and have to go back to the BOM. again, this is not logical. especially when the queries are using figures directly from production order tables.
    Since it can be done in 2005 version, why is SAP taking it out this feature in 2007?

  • Problem of Product Tree in Production Order

    Dear Experts,
    My query is related to product tree when i am trying to add production order then it will give me error that " Item already defined at a higher level in the Product Tree [ Production Order -Rows- Item No] [line : 1], ' Row no. 1]', [Message 3566 -12]".And where i can find the path of Product Tree.
    Thanks & Regards
    Amol

    Sorry some kind of missunderstanding.
    Ok i see your error message. This is often caused, when a item is already related to another BOM or production order.
    Example :
    Item 1 consists of Item B and Item C
    Item B could not consists of Item 1 cause Item B is a part of Item 1.
    Regards Steffen

Maybe you are looking for