Production Order Userexit or BADi

Hi Everybody,
Can someone tell me if there is a userexit or BADi which gets triggered when the we are doing availability check from VA01 to create the Production Order?
This is an urgent requirement.Any help will be greatly appreciated and rewarded :).
Thanks,
Supriya Manik.

Hi Siri,
As far as I know you can't get hold of the availability check at the Sales Order leve or MRP level.
According to my knowledge when you enter the material and quantity control goes to MM03 by entering the plant in MRP3 view. From there it will pick the availability check and determines rest of the thing.
So check point would be at ATP Quantity level. At that point you need to check exact include to add the code.
Check the program SAPMV45A and in that u will find lot of includes in that. Specifically check the includes MV45AIZZ and MV45AFZZ. If you check those includes u will come to know the exact triggering point from there you can write the code in the user exist what i mentioned above.

Similar Messages

Duplicate Sales Order - UserExit or BADI

Hi,
I have a requirement for one of my workflow.
When duplicate sales order is received through EDI , I need to notify to Customer service team.
If purchase order and ship-to is same and PO date is within 30 days, need to notify that it is a duplicate sales order. Do we have any user-exits or BADI'S for this requirement?
Thanks
Ashu
Edited by: Ashu on Jul 8, 2009 9:10 PM

Hi Ashu,
Customer function module EXIT_SAPLVEDA_001 (with include ZXVEDU03). This is called for every segment.
Customer function module EXIT_SAPLVEDA_011 (with include ZXVEDU13). This is called after segments are filled. I suppose this is the correct one. Make your validation and fill the error table DERRTAB with the message.
Customer function module EXIT_SAPLVEDA_010 (with include ZXVEDU12). This is used to change the idoc status, as well you can trigger the workflow.
Customer function module EXIT_SAPLVEDA_005 (with include ZXVEDU07). You can check this.
All my suggestions are based after checking the code. Please debug before you use them.
Please update the thread with your approach.
Thank you,
Goutham.

UserExit for priority in production order

Hi SAP-Gurus,
a friend of mine told me that they had an userexit in place which automatically determines the priority of an order according to the reduction level in the production order...
Supposedly it works according to the following logic...
reduction strategy 4 (100% reduction) -> priority 1
reduction strategy 3 (75% reduction) -> priority 2
reduction strategy 2 (50% reduction) -> priority 3
reduction strategy 1 (25% reduction) -> priority 4
reduction strategy ' ' (no reduction) -> priority ' '
Moreover, the exit has three different triggers. Creating/saving & releasing a production order. At first glance doesn't seem to be to complicated, however I need more info....
Has anybody ever heard of such a functionality and is able to give me the number of the exit?!?
Any help is greatly appreciated....
Regards,
Bobby

Dear Boban,
maybe you mean BAdI Workorder_Update instead of Userexit? In workorder_update you have methodes for at_release, at_save and in_update. You can check in SE18.
Otherwise you can check the user exits in SMOD, the exits in production order start with PPCOxxxx.
Regards,
Sabine

Userexit required to update operation of components in production orders

Hello,
Is there a userexit or badi that exists to change operations of components in a production order?
As soon as a production order is created or modified, we need to have the system automatically adjust the operation of each component according to the value of a specific field in the material master. In certain cases, the operation must be 0010. In other cases, the operation must be 0030. Our PP master data is setup to have all materials assigned to a dummy workcenter (operation 0010).
Enhancement PPCO0023 doesn't work because the user exit only gets executed if the user manually goes into the components screen and makes a change to a component.
Thanks for your help,
Marie-Eve

Hi MARIE,
There is no user exit as such.
Regards,
Satyajit

Exit/Badi in the transaction of production order create or change (CO02)

hi all,
I need an exit/Badi in the transaction of production order create or change (preferably during SAVE).
I want to change structure AFVGD-usr02,AFVGD-usr03 .
<b>PPCO0007 Exit when saving production order</b>
the exit is not applicable EXIT_SAPLCOZV_001 .

Hi
we around 200 exit for this tcode i found only three badi for this tcode.
AFABD_CHANGE          Change Relationship
CAUFVD_CHANGE        BAdI: Overall Network Scheduling with Selection Option
SIDAT_UPDATE            Change date of price simulation.
check with this goto se18 and F4 thn give the Package as CO.enter u get this three.
reward pointd if use full

BADI for MIGO ( Material document change for Production Order goods Receipt

Hey experts,
I am actually stuck up with MIGO BADI.
There are many BADI's available but i dont think any one would suit my requirement.
here goes my requirement.
When a Production Order is created in transaction CO01 , the system picks the value of the moving material and multiplies it with the quantity .
But when the production order is being confirmed thru CO11N , again the system picks the present moving price of the material and multiplies it with the quantity. This goods receipt is done through MIGO transaction by selecting goods receipt for order that is 101 movement type. I have been asked to get the value of the material at the time of production order create and then change the dmbtr value of MSEG table, this can be done in the badi at the time of creation of material document number but the BADI's MB_DOCUMENT_BEFORE_UPDATE, MB_DOCUMENT_UPDATE do not allow me to change the values .
The BADI MB_DOCUMENT_BEFORE_UPDATE does not allow any changes to be made for XMSEG table
and MB_DOCUMENT_UPDATE is passed by value and hence the changes are not affected after it comes out of the method.
Guys please help me as this creating a hell lot of problem here and i would surely reward the max points if answered.
here is the example to be more precise.
Material : Pen
Quantity : 10.
date : 01.06.2008.
TYransaction co01.
lets say at the time of creation the value of the material was 5 rs
a material document would be created with the value : 50 rs.
Now for this prod. order goods receipt is being done on 01.07.2008.
Let the value be 4 rs now.
so the Material document would be created with a value of 40 rs.
I need to make this 50 rs.
I have got all the data to do it but i am not gettin the coreect BADI, i just want the BADI name to change the DMBTR value at the time of creation of material Document.
Thanks in Advance.

User-exit /BADI to change mseg during migo
https://forums.sdn.sap.com/click.jspa?searchID=-1&messageID=5435559
try this links

User Exit/BADI for Production Order Availability Check

Hi PP experts,
Is there any user exit or BADI which can be used for Production Order Availability Check during order creation/release or while running collective availability check (COMAC) to include additional check conditions such as do not commit quantity (commitment qty = 0) if storage location for a component is missing in the production order due to storage location is not maintained/specified for that component in the material master.
Note: In this case the availability check is set (configured) to check at the storage location level.

Dear ,
Availablity Check is not Plant Specific or Storage Loaction spefic .ATP does not check the stock for any particualar stock in storage loaction rather it cheks various stocks based inward and out ward movement time through PR/PO/Dependent /Planned Order /Stock Type irrespective of any Storage Location .
BAPI which can be used :
1.BAPI_PRODORD_CHECK_MAT_AVAIL
can we exclude materials of prod order in availability check
what is availability check concept how it is used in SAP
Check the above if it is useful
Regards
JH

Exit or Badi: On release of Production Order

Hi,
Module PP.
Q) Say, equipment is under maintanance so it should give warning message while releasing the Production order through CO01.
Note: it should give message while releasing the Production Order and not when saving it.
Regards,
Sujit

Check below badis.
AFABD_CHANGE
CAUFVD_CHANGE
SIDAT_UPDATE
Regards,
Mkhan

Production Order BADi / user exit

Please can anyone suggest a BADi / user exit that can be used to pop up box after the save button is clicked in production order create (CO01)
Thanks
Edited by: MLockett on Oct 9, 2009 3:31 PM

Hi,
you can use the below exit...
PPCO0007 Exit when saving production order
Prabhudas

Customer function / badi to CHANGE AFVC-STEUS (Production Order)

Hi Gurus,
i'm looking for a customer function/badi to change field AFVC-STEUS when postin a Production Order.
The PPCO0... customer functions seems NO good because allow only to check but not to change data.
Any hint?

BBP_PD_PO_CHANGE <- that one
BBP_PD_PO_SAVE
COMMIT WORK.
The others to persist the change into the database

MIGO for Production Order - BADI

Hi,
I have implemented from ABAPER a BADI in MIGO which assigns batch number automatically to the receiving material. In the lower area in BATCH tab CLASSIFICATION button is available but by clicking on this button it does not open the characteristics screen for input. While i have created a class and its characteristics and assigned this class to the material also. Now where is the problem?
Kindly reply its urgent.
Regards,
Hammad

Hi,
Batch search strategy
COB1-Batch search stg for finding a batch suitable for the raw material in a production order, during creation/release/confirmation.
VCH1 - Batch search stg. for the product in a sales order delivery processing.
MBC1 - Batch search stg. for finding a batch during inv transaction for a given movement type.
On the initial screen of your application choose Logistics>central function>batch management>Batch determination>For process order -->Batch search strategy --> Create.
Procedure
On the initial screen of your application choose Batch search strategy -->Create.
Choose the strategy type, say choose co02 or ME01
If you want to see a list of the strategy records available, choose Strategy info.
Choose the key combination-
Enter the required date-->say plant ,production order type, product, valid from and component for which you want to have this
Choose Selection criteria push button
If no values have been entered, enter the selection class and the characteristic values.
Go back to the screen on which you create a batch search strategy.
Choose Sort if required(it should be defined earlier(in CO70- here you are giving the characteristic name on which you want to sort)
Choose a sort sequence.
save.
Check also in COR4, for the combination of plant and order type...you have selected search procedure-Co0001
This is linked to stg what you have enter above.
Please come back if you need more help.
Regards
R.Brahmankar
Reward if useful.

User-Exits/Badis for T.Code Co01 Production Order

Hi Friends,
Please can any one give the User-Exits/ Badis For Co01 , I need to link the Material with Documents....
Thanks,
Ravi...........

These are the available user exits..
CCOWB001            Customer exit for modifying menu entries
COIB0001            Customer Exit for As-Built Assignment Tool
COZF0001            Change purchase req. for externally processed operation
COZF0002            Change purchase req. for externally procured component
PPCO0001            Application development: PP orders
PPCO0002            Check exit for setting delete mark / deletion indicator
PPCO0003            Check exit for order changes from sales order
PPCO0004            Sort and processing exit: Mass processing orders
PPCO0005            Storage location/backflushing when order is created
PPCO0006            Enhancement to specify defaults for fields in order header
PPCO0007            Exit when saving production order
PPCO0008            Enhancement in the adding and changing of components
PPCO0009            Enhancement in goods movements for prod. process order
PPCO0010            Enhancement in make-to-order production - Unit of measure
PPCO0012            Production Order: Display/Change Order Header Data
PPCO0013            Change priorities of selection crit. for batch determination
PPCO0015            Additional check for document links from BOMs
PPCO0016            Additional check for document links from master data
PPCO0017            Additional check for online processing of document links
PPCO0018            Check for changes to production order header
PPCO0019            Checks for changes to order operations
PPCO0021            Release Control for Automatic Batch Determination
PPCO0022            Determination of Production Memo
PPCO0023            Checks Changes to Order Components
STATTEXT            Modification exit for formatting status text lines

BADI for Production order

Hi,
Is there any BADI available for production order after save? I know that we have a user exit PPCO0007.
But there we dont get the production order number. But my requriement is to trigger an idoc when an Production order is created.
We have RCCLORD program to create the idoc but that can be used only with the order number. So If I get any BADI to retrieve the production order number after save, I can submit RCCLORD program using the order number.
Can any one suggest?
Regards,
Jeyananth

Hello,
The Badi : MB_DOCUMENT_BADI by implementing this badi you have 2 events
1) IF_EX_MB_DOCUMENT_BADI~MB_DOCUMENT_BEFORE_UPDATE
2) IF_EX_MB_DOCUMENT_BADI~MB_DOCUMENT_UPDATE
regards
Suresh Nair

BADI for Production Order CO01

is there any BADI for Production Order making CO01 Txn.
abhishek

HI,
You can find the BADI your self, Check the class CL_EXITHANDLER.
follow the below steps to find the suitable BADI for your case ..
1) Goto se24 (Display class cl_exithandler)
2) Double click on the method GET_INSTANCE.
3) Put a break point at Line no.25 (CASE sy-subrc).
Now
4) Execute SAP standard transaction
5) Press the required button for which you need to write an exit logic, the execution will stop at the break point.
6) Check the values of variable 'exit_name', it will give you the BADI name called at that time.
7) This way you will find all the BADIs called on click of any button in any transaction
if you follow this 7 steps, you will find a suitable BADI.
and also refer the thread
Re: MB_MIGO_ITEM_BADI
Regards
Sudheer

UserExit for Production Order

Hi,
Can some give me an UserExit or a BTE which gets triggered whenever the status of the Production Order is changed? Please help me with this...........
Thanks,
Archana.

Hi ,
plz have a look at the way of finding user exits--->
first find out the developement class of that tcode ,i.e from the program ->system-Status-->program
and search for CALL CUSTOM in the main program , and double click on it it will take u to FM exits.
or search in SE15 based on the development class .
in case of BTE , search program for OPEN_FI
or FIBF/BF24/44 tcode.
Regards
Prabhu

Production Order Userexit or BADi

Similar Messages

Maybe you are looking for