Profile down after new modem installation

Hi there, I had Business infinty installed recently and have had similar problems to a couple of other forumites: Had the same 2 week modem failure problem, the engineer came round yesterday and installed a new one and after a few shaky hours my connection has levelled of at 19mbs with a profile at 20mbs, upload speed dropped from 1.6mbs to .6 at the moment. A bit trying as previously my profile was set at 27mbs and had 1.6mbs upload speed.
What can be done to raise my profile? is it a question of wait and see or should I call BT?

Update for those with similar problems:
it was another defective modem, third one now in place and everything is back as it should be. BT have got a major problem regarding these modems

Similar Messages

Laptop breaks down after new BIOS installation

Hi ,
My laptop HP 2000 - 2d11x is nearly a year old now. My problems started last month when my laptop started overheating and shutting down randomly. Now my laptop is completely unusable. I do not know what happened to it but I suspect that the incompatible BIOS installed recently in my computer caused its break down.
The first problem I had with this laptop is its overheating . I bought a usb cooling fan for it but the overheating persisted. Then, one day my laptop randomly shut down. For many days the laptop shuts down every hour or so when I use it. Then one day I took the battery out and started using the laptop without the battery. It worked continously and did not shut down but the overheating problem got worse.
Couple of days later I inserted the battery and the whole unit shut down. I tried again and again but my laptop keeps shutting every 5 seconds after I inserted the battery which is half charged. I cannot charge it properly because the laptop shuts down. It went on till my battery was out of charge and I can not use it anymore.
During this time my laptop only works when I plug it without battery.
I thought my battery was the problem so I stopped using it and asked HP Support for replacement since my laptop is still under warranty and I have no money to buy a new one. The agents I talked with in chat support, denied my requests for battery replacement. The first one promised to call me and said he talked with his supervisor about my problem. I waited for 48 hours but he didn't call or email me. The next agent I chat with remote accessed my computer and installed BIOS. I do not remember what kind of BIOS was it but all I remember is its a BIOS. The agent asked me to try and put the battery but the laptop shut down. It restarted and I waited a long time before it started. When it was finally restarted the agent and the connection was gone. My battery problem was still not solved. The third agent I talked with again asked to remote access my computer. Then he said that HP cannot replace my battery because battery shipment is prohibited by Bureau of Customs. My father bought this laptop abroad in the US and we are living in the Philippines. I was frustrated and thought I will just have to use the laptop without battery. A day later something horrible happened. My laptop did not start anymore even when I plug it with the adapter! The lights blink and goes out after 10 or so seconds when I click the start button.
Now my laptop is broken, black screen and completely unusable.
I researched a bit and realized that HP and overheating issues always went hand in hand.. I'm suspecting that the BIOS update was improperly done and the overeheating fried my motherboard. If this is the, then it's the HP technician's fault for making things worse. I hope they replace the laptop or atleast fix it. They're not taking imported laptops seriously and this really angers me because HP laptops by default come with the ITW (International Traveller's Warranty). I need your advice on what to do.

Hello armela,
Welcome to the HP Forums!
I understand your system was overheating and shutting down, and after a BIOS update you are no longer able to start up the notebook.
Here is a great document to walk you through restoring the BIOS to the original factory version and settings: Restoring the BIOS
If that does not resolve the issue, here is a good place to start troubleshooting startup problems (choose which link best represents your issue):
Computer Does Not Start and the LEDs Blink or the Computer Beeps
Troubleshooting Black Screen Displays with No Error Messages During Startup or Boot
Once you are able to get the system to boot, you may want to take a look at this document to troubleshoot the overheating issue, so we can prevent this from happening again: Reducing Heat Inside the PC to Prevent Overheating
If you are still experiencing problems take a look at our Global Warranty and FAQs. You will want to contact support in the region which you are currently located, in this case, the Philippines. You can reach them by phone at this number: 1-800-88-8588 - Mon-Fri 08:30 - 17:30 (excl PH)
I hope this helps!
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP.

My Mac 10.7.5 won't shut down after new software (security update 2013-003) installation-- hangs at grey screen with "software update" at top. It also intermittently goes to sleep without my asking. What to do?

My Mac 10.7.5 won't shut down after a new software installation (Security Update 2013-003). It just hangs at a grey screen with "Software Update" at the top. I have to force quit, then restart-- but the new software hasn't installed.
My Mac also intermittently goes into Sleep mode, repeatedly, unprompted by me. I suspect a connection between these two problems.
I have tried deleting the /Library/Updates folder. It hasn't helped. The update still won't install, and my Mac won't shut down without my forcing the quit.
Help please!

Hi, I've just come accross the same problem... did you manage to get a resolution??
Cheers, Chris.

Requery Drop Down after new record added

Hi,
I have a form built with ADDT. There is a dropdown box tied to the buyers table (ID, Name) and a button to add new buyers. The buyers table has full contact info in it so I can't use the editable drop down. I need to be able to requery the drop down box after the user clicks the add buyer button, which opens a window with the add buyer form, so that it checks the table again and shows the new buyer in the drop down list.
At the moment I have it all working except that when the user adds a new buyer they have to refresh the page, losing any data already entered, in order to see the newly entered data in the drop down. Is there a way to requery the drop down after a new record has been entered or when the user clicks the submit button of the add buyer form? Or, maybe requery when the user clicks on the control again after entering the new buyer?
Any help is much appreciated,
Tony

Thanks again Gunter,
Sorry, I've been out for a few days. I ended up solving the problem by adding a preform search form to search for the buyers in the table before hitting the form. If the buyer isn't there it's added before going to the form. Works for me.
I do have another question about a javascript I've been trying to get working on the same form. It converts numbers in one field to words in another (http://javascript.about.com/library/bltoword.htm) and looks fairly simple, but I think the way ADDT creates the fields names I can't figure out how to make it work. I was able to get it to work on a simple html form, but not the ADDT form. Here's some code with the two fields and the button that calls the javascript. Below that is the call in the head section. The link is also there, but I don't need to post it.
I know this can work but I really could use some help.
Thanks for any help
<td class="KT_th"><label for="guarantee_<?php echo $cnt1; ?>">Guarantee:</label></td>
<td><input type="text" name="guarantee_<?php echo $cnt1; ?>" id="guarantee_<?php echo $cnt1; ?>" value="<?php echo KT_escapeAttribute($row_rscontracts['guarantee']); ?>" size="10"/>
<?php echo $tNGs->displayFieldHint("guarantee");?> <?php echo $tNGs->displayFieldError("contracts", "guarantee", $cnt1); ?>
<label>
<input type="button" onclick="form1.price_text_1.value = toWords(form1.guarantee_1.value);" value="Convert to Text" />
</label></td>
<td width="106" class="KT_th"><label for="foreign_exchange_<?php echo $cnt1; ?>">Curreny:</label></td>
<td width="150"><select name="foreign_exchange_<?php echo $cnt1; ?>" id="foreign_exchange_<?php echo $cnt1; ?>">
<option value=""><?php echo NXT_getResource("Select one..."); ?></option>
<?php
do {
?>
<tr>
<td width="109" valign="top" class="KT_th">Price Text:</td>
<td width="197" valign="top"><span class="KT_th">
<textarea name="price_text_<?php echo $cnt1; ?>" cols="32" id="price_text_<?php echo $cnt1; ?>"><?php echo KT_escapeAttribute($row_rscontracts['price_text']); ?></textarea>
</span></td>
This is in the head section:
<script language="JavaScript" type="text/javascript">

</script>

ODS activation failures after new hardware installation..urgent

Hi All,
I am working in PRD.There are 10 process chains which i need to monitor daily.Daily ODS activation fails in 4 of the 10 chains.The error message for two of the failures are,
Task 0040 during SID specification without confirmation
and for another process it is showing "DBIF_RSQL_SQL_ERROR" error.
manually I am doing steps and the activation is successful.These type of errors we are getting after the new hardware installation.
Could anyone let me know are there any patches to be applied inorder to avoid such type of errors.
Please advice me what to do.
Thanks,
Manjula

What is the patch your currently on at the moment.
It could also be some of the settings in RZ11 have been changed. You need to work with your basis people to resolve this.
DBIF_RSQL_SQL_ERROR is a common problem and usually due to not enough processor's available and the database gettings into a knot.
Check SM21 and ST22 for the more information on the issue.

My mac isnt recognizing my printer after new modem installed

We got a new modem and now my mac doesnt recognize my HP Envy 4500 wireless printer. I have reinstalled the printer several times and it works for about 2 min then it says offline. Even when I reinstall it doesnt appear on the list of available printers and I have to use the set up wizard for my computer to find it. I have done all the mac updates and have all the right drivers. Our non mac computers still work fine and mine did too until the new modem. Any suggestions?

Hi @nmoff,
Welcome to the HP Forums!
I noticed that you are getting the error message "The system cannot find the specified file". When reinstalling your HP Photosmart c6180 on Windows 7. I am happy to help!
Please take a look through this post, Re: Install Error "The system cannot find the file specified" (hpzprl40.exe). (Even though it's for Windows 8 and a different printer these steps will work for you as well).
Hope this resolves your issue, and have a great day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

MacBook Pro 13" Late 2011 Experiencing Significant Slow Down After Boot Camp Installation

     Okay, so today, after installing Windows 7 on my MacBook Pro via Bootcamp Assistant, I experienced significant performance slow down (fans going at full blast, applications opening after extended periods of time, keystrokes not being registered) when I returned to my OS X partition/second hard drive. I have dual hard drives, one of them being a Samsung 256 GB SSD with OS X Mavericks and the other being my original 500 GB HDD, divided into a 250 GB OS X Mavericks partition and a 250 GB Windows partition. I have the SSD set as my startup disk and I have it located in the main HDD bay. I moved the old HDD into a caddy and placed it where the optical drive normally should be.
      After multiple failed attempts to install Windows via USB and Bootcamp Assistant, I decided to reinstall my optical drive and use a Windows installation disk. This attempt proved successful, and I was able to install Windows 7 onto the 250 GB partition I had created for it on the 500 GB HDD. After completing basic setup of Windows, I removed the optical disk drive and reinstalled the SSD and the HDD into their original spots (SSD in the main HDD bay, HDD in the caddy where the optical drive normally is).
     After completing this tedious process, I booted my Mac back up using the SSD. However, I noticed something was wrong when the login screen, apps, and nearly everything else on my desktop had slowed to crawl. I decided to check my Activity Monitor to see what the problem might be. Activity Monitor told me that the task "kernel_task" was taking up anywhere from 200-600% of my CPU, which explained the slowdown in performance. I looked around to see if there were others with the same problem as me, and I found that Spotlight Indexing might be an issue, with a potential remedy being move my Bootcamp Partition into the Privacy section of Spotlight under System Preferences. After doing that, I experienced no increase in performance and everything was still going very slowly.
     The next step I took was to see if booting into Safe Mode would help the issue. After booting into Safe Mode on my SSD, I noticed that things were back to their normal speeds, with applications opening at the speed they should be and keystrokes being registered instantaneously. However, the fans were still going and had not shut off once booting into Safe Mode. In addition, I checked Activity Monitor and the "kernel_task" in question was no longer taking up massive amounts of the CPU.
     At this point, I don't know what to do and I need help in restoring my Mac to original speeds. I may end up deleting my Boot Camp partition as a last measure if all else fails, seeing as I installed Windows in the first place for running a few programs and games that I can live without. However, I'd prefer to not have things come to that and fix things before deleting the Boot Camp Partition. I've heard that if everything runs normally in Safe Mode, then the issue is third-party software. Is this true?
     Any help would be greatly appreciated as I am writing this from the MacBook in question in Safe Mode because it's essentially useless in normal SSD operation.

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
Copy a line of text in this window to the Clipboard.
Paste into the window of another application.
Wait for the test to run. It usually takes a few minutes.
Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' \*AutoCad \*dropbox \*GoogleDr\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/ { next;} /(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -depth 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 4 3 32 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Re-establishing wireless after new hardrive installation

trying to reinstall system back onto laptop however, once i enter the ip in the address, i can not get passed the password area. admin doesn't work and no i did not change the password when i initially set it up. i have the wrt54gc. any thoughts on how i can get into the system to re establish it on my laptop?

To login to your router, the default settings are to leave the "user name" field blank, then in the password field, enter "admin" (with no quotes). If this does not work then apparently either you changed it, or someone logged in wirelessly to your router and changed it for you. (Did you have an unencrypted (open) wireless system?)
If you cannot log into your router, then the only option is to reset it to factory defaults.
To reset your router to factory defaults, use the following procedure:
1) Power down all computers, the router, and the modem, and unplug them from the wall.
2) Disconnect all wires from the router.
3) Power up the router and allow it to fully boot (1-2 minutes).
4) Press and hold the reset button for 30 seconds, then release it, then let the router reset and reboot (2-3 minutes).
5) Power down the router.
6) Connect one computer by wire to port 1 on the router (NOT to the internet port).
7) Power up the router and allow it to fully boot (1-2 minutes).
8) Power up the computer (if the computer has a wireless card, make sure it is off).
9) Try to ping the router. To do this, click the "Start" button > All Programs > Accessories > Command Prompt. A black DOS box will appear. Enter the following: "ping 192.168.1.1" (no quotes), and hit the Enter key. You will see 3 or 4 lines that start either with "Reply from ... " or "Request timed out." If you see "Reply from ...", your computer has found your router.
10) Open your browser and point it to 192.168.1.1. This will take you to your router's login page. Leave the user name blank, and in the password field, enter "admin" (with no quotes). This will take you to your router setup page. Note the version number of your firmware (usually listed near upper right corner of screen). Exit your browser.
If you get this far without problems, try the setup disk (or setup the router manually, if you prefer), and see if you can get your router setup and working.
If you cannot get "Reply from ..." in step 9 above, your router is dead.
If you get a reply in step 9, but cannot complete step 10, then either your router is dead or the firmware is corrupt. In this case, use the Linksys tftp.exe program to try to reload your router with the latest firmware. After reloading the firmware, repeat the above procedure starting with step 1.
If you need additional help, please state your ISP, the make and model of your modem, your router's firmware version, and the results of steps 9 and 10. Also, if you get any error messages, copy them exactly and report back.
Please let me know how things turn out for you.

WIFI ePrint B110a not working after new modem router

I have had an ePrint Photosmart B110a for over a year. It has worked great.
However recently our wifi modem router died, and we had to get a new one. It is a Dlink DSL 2875 AL.
I have set up the router and connected the printer to it via WIFI.
Now here is the problem. Immediately after I connect it, the printer works for about 15 seconds.
In other words, I reconnect the WIFI on the printer to the WIFI network, then if I immediately try to print something on my iPhone via WIFI, it will work.
However within less than 30 seconds if I try to print something else, it will say "printer is offline" and then won't show the printer at all in the iPhone "select printer" options menu.
I've spent hours on trying to solve this situation, I want to print over WIFI and it used to work great.
Could the modem be faulty? Could the printer be faulty? Is it a setting?
How do I fix this?
Please help.

Hello Tommotom,
Welcome to the HP Support Forums!
I see that you are having issues with the B110a and your iPhone when trying to print since changing your modem / router. I don't think there is an issue with the printer, iPhone or router, some settings may just need to be adjusted.
I see that the new router is a dual band router. You want to make sure that the printer and iPhone are connecting to only the 2.4 Ghz portion of the router. The printer will only work with 2.4 Ghz, the iPhone on the other hand, can connect to either.
Apple devices pick up the printer signal via the Bonjour protocol, I have worked with routers in the past that will not constantly broadcast the Bonjour protocol, this would cause your described issue too. To check the router, use this App on the phone, suggested by Shirlzz1: Help Determine if your router can support AirPrint with the Bonjour Discovery App.
Lastly, for now, check to ensure that the ports on the router are all open to allow full printing ability, this post will show you the ports: Check the Anti-Virus for Blocked Ports and Timed Scans.
I look forward to hearing back from you.
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Mandatory deployment after new client installs

Is it possible to have an application package mandatory for all new clients? We use Ghost to create our standard images and, after the technician adds the new computers to the correct domain, they install the SCCM client. There are a couple of applications
that need to be in the domain before they're installed and the techs manually pull them down from SCCM currently. I'd like to automate this process for them, but I don't want the applications to push out to every PC on the domain again since they already have
them.

Hi,
With the new application model, the application will not actually deploy again if the detection method detects that it is installed already. You could use inventory as well to deploy the application to computers not having it already for instance.
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

Slow down after new printer

I just hooked up a new HP C3100 printer to my Mac Mini G4 1.25, 512 RAM. The printer is working fine, but my mini now runs at about 1/4 the speed it was before. Everything has slowed down. Is it some of the extra HP software, like HP device manager and HP Photosmart studio that got loaded from the printer's install disc? Can I fix this?

Jake Stickelmeyer-
Those programs don't usually play nice.
Try the uninstaller as Boece mentioned.
Luck-
-DaddyPaycheck

Slow down after new update

How many people are experiencing a major slow down and internet loss after the latest AirPort update. I've been having a lot of trouble. Also does anyone know how to fix it?

Ok, found a solution that may work. I found an application called appzapper. You can find it in mac os x/downloads here on the apple site. it is shareware but you get 5 free zaps, so good enough. download the program and then find the update package /library/receipts/airport20060001.pkg. drag the package onto appzapper. Bang no more update(at leat i think) I had to restart and when i did i had my full 54mb connectivity and i could again find my g5 on the network for file sharing. hope this helps.

Tablet crashes when trying to shut down after new 4.3 update

He guys
My self and my parents have each got one of these fantastic tablets and since this new update. There has been NOTHING but problems........
Flickering screen DNLA not working.......
And now a new thing that all 3 of us have noticed..... When it comes to shutting it down 1st takes forever....... And 2 there is a 50/50 chance that it crashes freezes and have to reset it to shut it down
And for it to happen on all 3 tablets isn't. A coincidence.!!!
Anybody else have this problem?????

Hi and welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
This has already been reported in another topic.
http://talk.sonymobile.com/t5/Xperia-Tablet-Z/Tablet-Z-4-3-shutdown/td-p/495517
- Community Manager Sony Xperia Support Forum
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Mac Mini (mid 2010) horizontal screen flicker after new RAM installation

Hi, trying to help someone fix their mid 2010 mac mini here.
The model he bought came with 4GB of RAM; but he upgraded and put 8GB of RAM in. (the kingston variety KVR1066D3D4R7S/4GI 4GB DDR3-1066 I think)
Before the RAM there were no display problems, after installation small horizontal lines of flickering would appear around every minute or so. The screen is a Samsung 2333 Syncmaster connected via the mini display adaptor.
We've tried the display and adaptor in a Macbook Pro late 2008 and no problems so we think we've eliminated that variable. We've just gone through the screen calibration in Sys Prefs and we're still seeing if that's fixed it. We'll also try adjusting the refresh rate but we're doubtful.
Any ideas?

Apple support advised me to use RAM sold by Apple ($400 for 8GB).
I have 2x4GB hynix modules (by the way I had hynix stock modules in my mini) and if I mix 4GB(not Apple) and 1GB(Apple) it works just fine. It's obvious that 2 different modules won't work in dual channel BUT Xbench shows no difference in performance in any configuration. I tested different configurations: 2x4GB(not apple memory), 2x1GB(stock modules), 1Gb+4GB(stock and non stock) all of them show very similar performance +/- 3%.
This mean that mac mini doesn't use dual-channel memory mode (( There's also a chance that Xbench shows wrong results regarding RAM performance but to me, it seems very unlikely.

[SOLVED]No sound for user after new motherboard installation

So I installed a new motherboard, and thus a new soundchip. The system boots, it works fine, except for the fact that I just don't have any sound. MPD and mpv/mplayer don't give me any sound. I do, however, get sound from youtube in firefox. When I start a video in VLC, it tells me:
Audio output failed:
The audio device "default" could not be used:
No such device.
When I try to start alsamixer, I get: "cannot open mixer: No such device"
When I try to start alsamixer with sudo, it works...the levels are fine and the channels unmuted. Starting a video as root also gives me sound. Here is some output from mpv:
kelnoky ~/down/malcolm/mitm/season 2 $ sudo mpv Malcolm\ in\ the\ Middle\ -\ 2x07\ -\ Robbery.avi
[sudo] password for kelnoky:
Playing: Malcolm in the Middle - 2x07 - Robbery.avi
(+) Video --vid=1 (mpeg4)
(+) Audio --aid=1 (mp3)
AO: [alsa] 48000Hz stereo 2ch s16
VO: [opengl] 608x340 yuv420p
AV: 00:03:06 / 00:22:11 (14%) A-V: -0.000
[input] No bind found for key 'DEL'.
AV: 00:03:07 / 00:22:11 (14%) A-V: 0.000
[input] No bind found for key 'DEL'.
AV: 00:03:09 / 00:22:11 (14%) A-V: 0.000
Exiting... (Quit)
kelnoky ~/down/malcolm/mitm/season 2 $ mpv Malcolm\ in\ the\ Middle\ -\ 2x07\ -\ Robbery.avi
[input_file] Client connected
Playing: Malcolm in the Middle - 2x07 - Robbery.avi
(+) Video --vid=1 (mpeg4)
(+) Audio --aid=1 (mp3)
Using software decoding.
ALSA lib confmisc.c:768:(parse_card) cannot find card 'SB'
ALSA lib conf.c:4260:(_snd_config_evaluate) function snd_func_card_driver returned error: No such device
ALSA lib confmisc.c:392:(snd_func_concat) error evaluating strings
ALSA lib conf.c:4260:(_snd_config_evaluate) function snd_func_concat returned error: No such device
ALSA lib confmisc.c:1251:(snd_func_refer) error evaluating name
ALSA lib conf.c:4260:(_snd_config_evaluate) function snd_func_refer returned error: No such device
ALSA lib conf.c:4739:(snd_config_expand) Evaluate error: No such device
ALSA lib pcm.c:2267:(snd_pcm_open_noupdate) Unknown PCM default
[ao/alsa] Playback open error: No such device
[ao/oss] Can't open audio device /dev/dsp: No such file or directory
connect(2) call to /dev/shm/jack-1000/default/jack_0 failed (err=No such file or directory)
attempt to connect to server failed
[ao/jack] cannot open server
Could not open/initialize audio device -> no sound.
Audio: no audio
VO: [opengl] 608x340 yuv420p
Fontconfig error: "/home/kelnoky/.config/fontconfig/fonts.conf", line 3: XML or text declaration not at start of entity
Fontconfig error: "/home/kelnoky/.config/fontconfig/fonts.conf", line 3: XML or text declaration not at start of entity
Fontconfig error: "/home/kelnoky/.config/fontconfig/fonts.conf", line 3: XML or text declaration not at start of entity
V: 00:02:03 / 00:22:11 (9%)
Exiting... (Quit)
First as root, works, then as user, doesn't. I tried adding my user to the "audio" group, it didn't do anything. Please help.
Last edited by kelnoky (2015-06-11 07:34:26)

As usual, I try forever for fix it, then finally post a topic on the forums and immediately afterwards I find the error and fix it. I had an old ~/.asoundrc that was pointing to the now obsolete soundcard. Deleted that and now it works.

Profile down after new modem installation

Similar Messages

Maybe you are looking for