Profiles B/D and forms6i
Hi all, I need your help.
I have an application in Form 6i and I have implemented expiration of Session-level database of profiles, the problem I have is that I do not know in which time expired the session because it shows me no message and the application is open, try to do something and begin to get errors but I would please help me with knowledge of this method yasi to close the application.
Thank you.
Since the session is managed by the database, you would need a Forms method to periodically (heartbeat) check the database to see if the session had timed out. This heartbeat check would, in fact, turn into a form of session maintainer which would prevent the session from timing out. Not only that, in order to check the status of the session, you would be generating network traffic which would negatively impact your Forms 6i application if it is deployed to the web and could even impact it if deployed in traditional Client/Server (CS) mode.
Remembering back to when I was developing for the Oracle E-Business Suite (EBS), even Oracle just displayed a generic "Session Time Out" message and terminated the application. Users had to log back into the EBS. I don't know if this has changed with Release 12, but that how it was with Release 11.5 (as I recall).
Craig...
Similar Messages
-
Application won't open in my profile, but open and run great in a test profile
Just got a new macbook
I imported the profile from my old MAcbook and some application won't work anymore...
So I got my way to make macoffice to work again...
Now My suitcase fusion don't want to open... when i clic on the icon, it start and it ask me if I want to check for update no mather if I clic yes or no, after it close... So I try it in another profile and it work great...
I had similar issue in the past and I had to copy file from the test profile to my main profiles...
but this time it's not working...
any idea ???
Thanks in advanceI suggest to go to your profile's library and look for Application Support folder. Verify if it contains a folder matching your application. If so delete it.
Then got to Preferences folder and look for files or folder related to your application name. Delete them too.
now restart your application.
To go to your Library folder in Lion: In Finder navigate to your user folder and use the Go To menu item Go to folder and enter "Library" as it is a hidden folder in Lion. -
After two days of not being able to open Firefox, I found an article on this website which suggested that I create a new profile. I followed the instructions (which never stated that I should first backup Firefox or my old profile) After creating the new profile, Firefox is once again working fine but, I am unable to access important data such as bookmarks and history.
I have followed several suggestion on this website but, I am still unable to find my old profile content.As long as you did not uninstall Firefox and remove personal data, your old profile still should be in the same location. Depending on how messed up it was, here are two options:
'''(1) Use the profile manager to start Firefox up in your old profile and create a fresh bookmarks backup.''' If it didn't run, this won't be useful.
To start in a different profile, Exit out of Firefox and start it up from the Start menu, search box, using
firefox.exe -P
Your old profile may have a name like default.
Then you can create a fresh backup or export of your bookmarks (or both) to a neutral location (e.g., the Documents folder). These articles have the steps for creating these files:
* [[Restore bookmarks from backup or move them to another computer]]
* [[Export Firefox bookmarks to an HTML file to back up or transfer bookmarks]] (note: does not preserve tags you have assigned to bookmarks, if any)
Exit Firefox, use the profile manager to return to your new profile, then you can either restore the bookmark backup or import the HTML file. The difference is that a restore completely replaces whatever exists now, while an import adds to what you have now.
* [[Restore bookmarks from backup or move them to another computer]]
* [[Import Bookmarks from an HTML file]]
Success?
'''(2) Restore an old bookmark backup.''' Firefox creates these files regularly, but it might not be perfectly complete.
To access the old files, I suggest starting from your current (new) profile folder. You can open that from within Firefox using either:
* "3-bar" menu button > "?" button > Troubleshooting Information
* (menu bar) Help > Troubleshooting Information
* type or paste about:support in the address bar and press Enter
In the first table on the page, click the "Show Folder" button. This should launch a new window showing your ''current'' settings files. Using the address bar of that window, click up to the Profiles folder level and then double-click into your old profile folder, then into its bookmarkbackups folder. Copy the latest backup file to a neutral location (such as your Documents folder).
Back in Firefox, try to restore the older backup. Note: this will completely replace your bookmarks in this profile, so if you have saved new bookmarks you want to save, please perform the optional steps in the following list:
* Optional (preserve new bookmarks): [[Export Firefox bookmarks to an HTML file to back up or transfer bookmarks]]
* [[Restore bookmarks from backup or move them to another computer]] - use Choose File to go to your Documents folder to get the old backup
* Optional (add new bookmarks to the restored set): [[Import Bookmarks from an HTML file]]
Success? -
I have downloaded DNG Profile Editor 1_0_4 and prepared a profile which I can not see in my Camera Raw 6.0 (I have photoshop CS5). Could you please give me an advice?
Uninstall Trusteer software
http://www.trusteer.com/support/uninstalling-rapport-mac-os-x
Remove Sophos
https://discussions.apple.com/message/21069437#21069437 -
Menu Modules in Forms4.5 and Forms6i
I have some doubts regarding in forms4.5 and forms6i
Recently I have migrated Forms 4.5 into Forms 6i. In forms4.5 I
can crete a menu
module and can attach into form without canvas. But I cannot in
Forms 6i, I would like to call a menu module " FULL_SCREEN"
property in forms6i, There are three types are in menu types,
FULL_SCREEN,BAR,PULL_DOWN. I have used all these properties in
forms6i, No difference. My question is I would like to call a
menu module in " FULL_SCREEN" type in Forms6i. Can u help to
come out of this.
Thanks in advance
Reddy
mail: [email protected]If I remember right, the MENU% tables were not part of Forms 3, but SQL*Menu. Check the FRM40_MNU% about menu info (only if you store forms in a database).
-
Problem with Adobe Premiere elements v.4 running on vista. When I try to upload directly to youtube I get a message" ! Profile File Invalid" and can't upload. I have to save the file to PC then upload. Can you help?
As Steve points out, YouTube made major changes to their accounts and the handling of those, when they partnered with Google, about the time that PrE 7 was in full-swing. It is likely that they have made more changes, so even PrE 8's direct upload might now be obsolete.
Now, PrPro has some great (for the moment) YouTube Presets for Export, it does not have that direct link for uploading, that PrE does. Still, either program should be able to do the Export/Share to a YouTube-compliant file, that can be manually uploaded.
Just be aware that YouTube changes their specs. very often, and that they will also re-encode anything that you upload. I always recommend that a user check the published specs. for files on a monthly basis, just to see if YouTube has made a major change, that might affect the specs. of the files that they want - at that moment in time.
YouTube is a "moving target," in many ways. They are so dynamic, because they are still defining that niche on the Internet.
Good luck,
Hunt -
Netwrok Profile,Network type and reference to a plant
Whenever a network is created, we must assign it to a Network Profile, Network type and it should have a reference to a plant....what do you mean by this?
Hi,
In order to create a network, network profile and network type should be defined in advance.
1. The network profile contains default values and parameters for controlling the processing of networks, such as control keys for activities.
The data which you enter in the network profile is copied into the header, activities, and activity elements when you create a network.
2. Every network you create must have a network type allocated to it.
The network type determines:
a) order category
b) whether the network is used for planning
c) default value for the settlement profile
d) default value for a status profile, if you want to use the user status in status management
e) allocation of the network type to a number range
3. You enter more specific network type information (eg. default settlement rule, costing variant) <b>plant wise</b> in 'parameters for network type'.
You may visit:
http://help.sap.com/saphelp_47x200/helpdata/en/a9/8a853488601e33e10000009b38f83b/frameset.htm
Regards -
What are the endpoints attributes collected by NAC Profiler through SNMP and DHCP?
Hi Everyone,
Please help on this.
I want to know what are the endpoints attributes collected by NAC Profiler to discover and profile the endpoints.through SNMP protocol and DHCP protocol.
Also if anybody can explain a simple used case on this.
Please guide me on this.
Thanks in advance.
Thanks,
Abuzar.Hi,
SNMP
=====
NetMap queries network devices via SNMP for:
System information
Interface information
Bridge information
802.1X information (PAE MIB)
Routing/IP information
CDP MIB Information
This information is used to Build and maintain a model of the network topology and endpoint discovery.
NetMap uses SNMP Get, GetNext and GetBulk (when available) requests to query the SNMP agents running on the network infrastructure devices to gather specific Management Information Base (MIB) objects about their status based on device type (Layer 2 or Layer 3).
In addition to polling each network device for all MIB data at a regular interval, NetMap may also be commanded to poll port-specific information when the NAC Profiler system is notified that an endpoint has joined or left the network via SNMP traps sent by devices at the network edge, switches typically.
Upon receipt and verification of a link state (link up, link down) or MAC notification trap, NetTrap will notify the NAC Profiler Server that a change has occurred on the network edge (endpoint joined or left a network port). If the trapping device is in the NAC Profiler configuration, the NetMap component module assigned to poll the device that sent the trap will be commanded by the Server module to initiate a poll of the device's port information to determine the change to the endpoint topology that resulted in the trap being sent by the network device.
The information gathered by NetMap is processed by the Server accordingly to update the network topology, noting the endpoint joining or leaving a port. Note that NetMap SNMP polling of network devices resulting from a trap is localized to the port specified in the trap. This is unlike the regular polling that occurs at the frequency specified for each device type (L2 and L3) which gathers all SNMP information from the device used by the NAC Profiler system.
DHCP:
=====
The NetWatch module listens for traffic including DHCP traffic.
The module will collect all the DHCP information on the traffic collected, like mac address, ip address, DHCP Vendor Class Identifier in DHCP request, host name in DHCP request, requested specified options in DHCP request (option 55) and full list of DHCP options supported by the DHCP client as specified in the DHCP request.
All the endpointe data can then be used to map endpoints with profiles.
HTH,
Tiago
If this helps you and/or answers your question please mark the question as "answered" and/or rate it, so other users can easily find it. -
Type of Profile in SAP and uses
Dear Team,
I have create one client in SAP 4.7.During client copy I select Profile SAP_APPL ..When Clent copy is finished, Can i do all work in this Profile.
OR Explain The ALL Profile in SAP and whats the uses of these profile.
Thanks & Regards
Jagdish KumarHi,
Goto the below link n select copy profile
u will get the all description n list of profiles
http://help.sap.com/saphelp_nw04/helpdata/en/69/c24c4e4ba111d189750000e8322d00/frameset.htm
Thanks & Regards
Zam -
Please help! Is my IP profile too low and thus red...
Hi all,
My broadband connection seems particularly slow.
Is my IP profile too low and thus reducing my broadband speed?
Greatly appreciate any help here!
If it is the IP profile, how do I get it improved? Contact a moderator?
Here is the result from speedtester.net
Download speedachieved during the test was - 661 Kbps
For your connection, the acceptable range of speeds is 200-1000 Kbps.
Additional Information:
Your DSL Connection Rate :0 Kbps(DOWN-STREAM), 0 Kbps(UP-STREAM)
IP Profile for your line is - 750 Kbps
However here is what my router says:
ADSL line status
Connection information
Line state
Connected
Connection time
1 day, 1:29:10
Downstream
6,848 Kbps
Upstream
448 Kbps
ADSL settings
VPI/VCI
0/38
Type
PPPoA
Modulation
ITU-T G.992.1
Latency type
Interleaved
Noise margin (Down/Up)
8.1 dB / 26.0 dB
Line attenuation (Down/Up)
27.0 dB / 12.0 dB
Output power (Down/Up)
19.8 dBm / 12.4 dBm
Loss of Framing (Local)
0
Loss of Signal (Local)
0
Loss of Power (Local)
0
FEC Errors (Down/Up)
435241 / 0
CRC Errors (Down/Up)
479 / 2147480000
HEC Errors (Down/Up)
nil / 0
Error Seconds (Local)
135
Solved!
Go to Solution.just leave your router connected 24/7 for 3/5 days and the profile will come back to normal on it's own
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’. -
Profile Match up and Training Event details without LSO.
hello,
We have requirement where we want to show Profile Match up and Training Event details in MSS.But we are not going to use LSO.
so now que is without LSO there ivew will work or not. Now this iview are present in MSS folder.Is this iview are using LSO function module because of that they might not work?
Thanks in advance.
Jayesh talrejaTo make it more clear.... sorry for not explaining this initially.
1. There is a service in ESS(ITS) for profile match up.
2. For mss siddharth is asking from where does the data come in case of pv7i and 8i
So the answer for MSS is that if you need to use profile match up without LSO then you make use of the ITS based profile matchup service to identify how you will carry out a development.
I am not aware of any existing transaction for profie in MSS so you need to develop but the answer to your question is
"you can certainly use TEM (without LSO) to create profile match up in MSS".
This has been done for most of the customers by SAP as not everyone uses LSO.
Function RHPP_SHOW_PROFILE_MATCHUP will help you achieve this very easily without LSO.
Please feel free to ask for more details. -
Difference between developer2000 and forms6i
What is the difference between developer2000 and forms6i? WHat should I say in the interview (i know forms 6i very well)?
The features that were new with 6.0 and 6i are described in a New Features Overview white paper on OTN: http://otn.oracle.com/products/forms/pdf/275144.pdf
-
Funds Management Update profile 350 : commitment and Payment budgets
HI Gurus,
We have configured with update Profile 350 ;commitment and Payment budgets ( Former Budgeting).
For Procurement : Purchase Requisition and Puchase Order Level
For Cosumption : Goods Issue and FI direct Invoice (i.e: Exp Dr and Vendor Cr).
is that profile meets the requirement ?
Please clear me the Budget transactions updated.
1. Purchase Requistion
2. Purchase Order
3. GR
4. GI
5. Stock Transfer
6. Invoice
7. FI invoice
Regards,Hi, Laxmu,
All these can be managed by UP "000101" also. Why are u going for 351..?? Any specific reason??
Rgds,
Khushru -
My old email is not anymore existing.It was my Apple id. I updated my profile changing enail and password. Unfort. my Iphone did not update my profile and then I can not use my account by it. how can I do to reset my profile on IPhone4
Settings > iTunes and App Store > Apple ID > Sign Out > Sign In with the current Apple ID
Settings > iCloud > (Scroll Down) Delete Account > Sign In with the current Apple ID -
Can I load a specific camera/lens profile into LR and if so how?
Can I load a specific camera/lens profile into LR and if so how?
If the camera profile or lens profile is in a Lightroom compatible format (i.e. created by the DNG Profile Editor or Lens Profile Creator) then you can load the profile into LR by putting it into the following folder and restarting LR.
Windows Vista or 7—C: \ Users \ [your username] \ AppData \ Roaming \ Adobe \ CameraRaw \ CameraProfiles \
Mac—Macintosh HD / Users / [your username] / Library / Application Support / Adobe / CameraRaw / CameraProfiles /
For the lens profiles, substitute the LensProfiles folder for the CameraProfiles folder.
Maybe you are looking for
-
When emptying my trash, I get "The operation can't be completed because you don't have permission to access some of the items." (I always have a hard drive connected and have just found out that if I disconnect the hard drive, none of that trash sho
-
JDBC Adapter - Error - java.lang.NullPointerException
HI I am working on a JDBC to IDOC Scenario in PI 7.1 version, and configured the JDBC channel, However when I activated I do see the following error on the LOG on NWA Message: Stopped unexpectedly - reconfigure and activate to continue processing. Er
-
Generating Idoc from payment meduim format MT103
I want to generate an Idoc using payment meduim format mt103 with type Idoc. Can I do only by configuration. Thank for help.
-
How to reset OpenLDAP service that was marked for deletion
Hi, I installed the Shared Services, Essbase and Planning in my PC. After installing it, I went to services screen. I found that OpenLDAP service was in 'Started' and 'Disabled' status. When I try to change the status of the service from 'Disabled' t
-
Retreving a video from a keynote presentation?
i currently kave a presentation on my mac but need to find where one of the videos is stored so i can make it compatable for the ipad. does anyone know where/ what folder the videos from a presentation are kept.