Profit center group is not appering in Ke51

Dear all
I have created Profit Centre groups through T.Code KCH1 and after I can displayed in KCH3 by selecting F4 selection in ke51 there that particular profit center group is not appearing
Regards
   M

Dear maneeshpandey
Please check it first. were you selecting correct controlling area or not. if not pls go though OKKS change your controlling area
Regards
shankar

Similar Messages

  • ERROR in profit center group creation...

    hai...i want to UPLOAD ALL THE LIST OF PROFIT CENTER DETAILS INTO SAP USING BDC SESSION METHOD..for that purpose i tried to create profit center using  TCODE -KE51, but profit center group is not available in my system...i tried to create profit center group seperately using transaction KCH1 and assigned  that number   on profit center creation screen(KE51)..but i got the error..PROFIT CENTER GROUP 1  CANNOT BE USED HERE....how to solve this error.????may be  is there any error in creation of profit center group hierarchy..???..

    HI
    Thanks for the support, but  I have already checked Ambiguity Check but there is no duplicae groups/profit centers are existed.
    I tried the same through KCH2 and also path (profit center hierarchy maintenance), but the same error is existed. I have checked with different groups also. But any group it is throwing the same error.
    Ex if i am giving group K123456 which is not existed. But the same error is throwing.
    Can anybody please suggest is there any programe for correction ?
    Thanks in advance
    Rao

  • How to update profit center group?! Please help

    Hello All:
          We upgraded to ECC6.0 from 4.6C and I am getting an error below when I call some transaction that uses this profit center group:
    "Profit Center group XXXXXXXX not updated. The function is not supported for the selected object"
    Could anyone please tell me how to resolve this issue? All answers will be rewarded.
    Thanks.
    Mithun

    Thanks for the reply Rob. No, that is the only information I have! I just get a popup with that message!
    Thanks.
    Mithun

  • Profit center group field in profit center

    When i create a profit center in ke51 system asking profit center group filed is required. but i donot required filed i need optional field where can i put that.

    Hi
    Is there a specific reason why you do not want to enter the Profit Center group field? Is it because you do not know them as of now and you want to update later?
    The basic rule is the profit centers need to be assigned to a hierarchy.
    Karthik
    Edited by: Karthik Coneru on Mar 17, 2009 6:16 PM

  • How to create master data source for Profit center group in source system

    Profit center group information is available in SAP(T-code:kch3). But, I want to have this information in BW too.
    Can anyone tell me how to create a datasource for Profit center group? And which SAP table is able to feed master data for this information?
    Many thanks
    rajatina.

    HI ,
    It looks lilke we need to use the FM like 'G_SET_LIST_SELECT' to get the Profit
    Here ais note from the forums to get profit center group from table
    From Table SETLEAF,  Field SETCLASS  =  '0106'. Field SUBCLASS with controlling area. Profit center in Field VALFROM.
    You will get Group name in Field SETNAME.
    Regards,
    Sathya

  • Data required on the basis of Profit center group.

    Hi,
        Is there any table or report from where we can find out the values of customer, cusotmer description, city, GL Account, GL description, amount, sales document or sales order on the basis of PROFIT CENTER GROUP.
    Means i need the above details on the basis of  profit center group.
    Can anybody suggest on this
    Regards,
    Shree.

    Hi:
    Using this report, you can display according to profit center wise, not as profit center group wise.
    All the details are displayed accordling according to your requirement.
    Select the screen layout and select the fields you required.
    The Standard report is
    FBL5N - Display/Change Line Items
    Please let me know if you need more information.
    Assign points if useful.
    Regards
    MSReddy

  • Creation Of new profit center group

    Dear Experts,
    I would like to know who will create profit center group. What is the role of an abaper in creation of profit center group. How much time will it take to create a new profit center group.

    Hi,
    Certainly, not. It's not a major development, but a standard data maintenance. Even for reporting, standard ones, the creation of a new group does not mean additional development, as it will be automatically reflexed in the reports.
    Regards,
    Eli

  • Unable to create the Profit center groups

    Hi,
    We have created new company codes in R3Dev and also created the
    validation rules for the same. We have assigned the Set ID's to the
    validation rules. These Set ID's gets created when profit center groups
    are created for the new company codes.
    We have transported the company code configuration settings and the
    validation rules to R3QA.
    Now in R3QA, when I try to create the profit center groups in KCH5N for
    the new company codes, it says "the group already exists".This is
    caused due to the SET ID's which also got transported along with
    validation rules. I have checked the table 'SETHEADER" which shows the
    SET ID's for the new company codes.
    Could you please a solution to resolve this issue.
    Thanks
    Rakesh

    Hi Mohan,
    Since Set Id's have moved to quality along with vaidation rules, I am to create the profit center groups, as it says the group already exists. I believe the set Id's need the master data maintained in R3Q, before they are transported. Since this is not maintained, with the transport, the data is sitting for Set Ids at the table level (Table: SETHEADER),  because of which I am to unable to create the profit center groups.
    Thanks,
    Rakesh

  • Profit center group number on the report painter report.

    Hi,
    We have a client requirement where we have to develop Profit center by Functional Area report by using report painter report functionality, however we are able to bring profit center group description on to the report as per the requirement, but not able to get profit center group number displayed on the report.
    Can anyone please advice me if we can get the Profit center group number displayed on the report in Report painter report. Else let me know if we can get the requirement met by an ABAPER.

    Hi.
    First of all, through transaction GS01 create a set ID for profit centers.
    Give table GLPCT, let the set type be the default (basic set) and give field name RPRCTR. Then define the range of profit centers you want. If you want all the profit centers give * in the "from value field".
    Then create a variable through transaction GS11. Give table and field as above, choose variable type set and at the default set field choose the set you created.
    Finally, at report painter go to Edit/General Data Selection and select profit center.
    Check both flags (for entering sets and variables) and give at the form field the variable you've made.
    Now the progit center group will be available in the selection screen with default value the set you've made.
    Regards

  • Line item actuals report for Profit center group

    I am looking for a Line Item Actuals report for a Profit Center Group  on the lines of KSB 1 report for Cost center /groups.
    I tried report "KE5Z but only profit centers can be selected, not profit center groups.
    Any help on this

    Try out the following report
    S_ALR_87013326 - Profit Center Group: Plan/Actual/Variance
    Call up Actual line items, here we go you would get the profit center group reports in similar lines as KSB1.
    Award points so as to say thanks.
    Regards,
    Suraj

  • Profit center group wise balance sheet and trading account report req

    Hi.
    We are using Profit ceter accounting for one of our clients.its ECC 6.0 therefore New GL is activated. FSV is not configured.
    Now I want to get the reports - Profit center group wise balance sheet and trading a/c.
    Can anyone help me in this regard.
    Thanks in advance.
    Regards,
    Padmavathi

    Hi Padma
    the std reports S_PL0_***** serve the purpose... You can browse SAP easy access menu under FI
    you can input PC or a group of PC as additional selection criteria
    Ajay M

  • Profit center field is not appearing while posting of customer invoice  and

    Hi,
    profit center field is not appearing while posting of customer invoice in F-02 i was selected profit center field is optional on posting key and field status group level ................
    Can anybody tell what are all new gl Reporting list of transaction codes

    Hi,
    In the F-02 T.Code we cannot find the profit centre for customer line item. We have to attach the profit centre for the other line item i.e income gl account. Due to document splitting system will derive the profit centre and we can see the profit centre for the both line items under General Ledger view.
    Thanks,
    padmaja

  • Authorisation check on profir center group

    Dear Experts,
    We have a requirement to restrict the users's access to a particular profit center group.I have set the value in the tab "profit center group"  for object  K_PCA.The profit center org level is set to * .With these settings users are able to access other profit centers also.Do I have to remove or maintain a specific value for profit center to meet my requirement.
    Please suggest any solutions
    Edited by: mutnuru dinakar on Jun 24, 2011 1:48 PM

    Hi,
    Sorry for my late reply.Yes,I have done authorisation trace.It is only tracing object for company code F_BKPF_BUK.It is not showing the objects for either profit center or profit center group.I have found the below information from help.sap.com link.
    http://help.sap.com/saphelp_46c/helpdata/en/38/ac94de8d49d111a4620060b03c3b0e/content.htm
    If a transaction checks and does not find the authorization for the given profit center, it checks for authorization for the profit center group in the standard hierarchy that contains that profit center. If this authorization is also missing, the system checks on the next level up in the hierarchy. This search ends with the highest node in the standard hierarchy.
    Doe it mean can't we control the access on profit center group as the highest node will cover all the profit centers.
    Please suggest any solutions.
    Regards,

  • Re implimentation of new profit center & profit center group

    Dear all
        our client want to implement new profit center & profit center group but here already implemented profit center  and profit center  group .in this scenario what   are the things we need to consider before implementing profit center
    Regards
        MANEESH
    Edited by: maneeshpandey on Nov 14, 2011 7:01 AM

    Hi,
    Certainly, not. It's not a major development, but a standard data maintenance. Even for reporting, standard ones, the creation of a new group does not mean additional development, as it will be automatically reflexed in the reports.
    Regards,
    Eli

  • Reg: Profit Center Group Upload Prog

    Hi,
    In profit center group upload program im using FM: BAPI_PROFITCENTERGRP_CREATE, when
    im trying to upload data, in the flat file, if Hierarchy level '0' is appearing once means
    i can able to upload, but Hierarchy level '0' appears n number of times in flat file.
    how can i write logic; if level '0' appears means upload the file. after saved again need to come bak to the loop and need to process 2nd group(it starts with '0'). i need to pick one group from the internal table and process the logic, thn need to come out of loop and next set of group.
    Following code is working for a single set of profit center group.
      wa_pg[] = it_pg[].
      LOOP AT wa_pg.
        t_bapiset_hier-groupname = wa_pg-pcg.
        t_bapiset_hier-hierlevel = wa_pg-hierlvl.
        t_bapiset_hier-descript  = wa_pg-pcgdesc.
        APPEND t_bapiset_hier.
      ENDLOOP.
      CALL FUNCTION 'BAPI_PROFITCENTERGRP_CREATE'
        EXPORTING
          controllingareaimp       = 'S001'
      TOPNODEONLY              = ' '
    IMPORTING
      CONTROLLINGAREA          =
      GROUPNAME                =
      RETURN                   =
        TABLES
          hierarchynodes           = t_bapiset_hier
          hierarchyvalues          = t_bapi1116_values
      CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
       EXPORTING
         wait          = 'X'
    IMPORTING
      RETURN        =
    Thanks
    Hema

    Hi,
    Could you please try as follows:
    DATA: l_str type sychar50.
    LOOP AT wa_pg.
    if wa_pg-hierlv = '0' and t_bapiset_hier[] is not initial.
        perform call_bapi.
        clear: t_bapiset_hier, t_bapi1116_values, t_bapiset_hier[], t_bapi1116_values[].
    endif.
    t_bapiset_hier-groupname = wa_pg-pcg.
    t_bapiset_hier-hierlevel = wa_pg-hierlvl.
    t_bapiset_hier-descript = wa_pg-pcgdesc.
    APPEND t_bapiset_hier.
    at last.
        perform call_bapi.
        clear: t_bapiset_hier, t_bapi1116_values, t_bapiset_hier[], t_bapi1116_values[].
    endat.
    ENDLOOP.
    form call_bapi.
    CALL FUNCTION 'BAPI_PROFITCENTERGRP_CREATE'
    EXPORTING
    controllingareaimp = 'S001'
    TOPNODEONLY = ' '
    IMPORTING
    CONTROLLINGAREA =
    GROUPNAME =
    RETURN =
    TABLES
    hierarchynodes = t_bapiset_hier
    hierarchyvalues = t_bapi1116_values
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
    EXPORTING
    wait = 'X'
    IMPORTING
    RETURN =
    endform.
    Regards,
    Prasanth

Maybe you are looking for