Profit center is missing in the Sales Order Items

Hello,
I would like to ask why a profit center field in the sales order item data is blank but in the material master, the profit center is maintained. Why was it not populated during order entry?
Hoping for your support.
Thanks.

Hi Cynthia,
Please check if you have maintained Profit Center at correct place in Material Master. It is maintained at Mat master: Sales: gen/plant view (MARC-PRCTR)
If it is maintained here, it should get populated at Sales Order Item -> Account Assginment tab. This is Standard SAP behavior.
Regards,
Rianka

Similar Messages

Profit center is not picking from sales order to the billing document

Hi
I am creating billing document but it is not picking profit centre from the sales order.
Could you please help me in this.
thanks in advamce.

Hi,
Ensure that the profit center is assigned to your Sales order.
Also maintain the following settings in copy control.
Goto the T.Code "VTFA".
Select your valid combination.Details.
Double click on "Item".Select your Item category.
Details.
Maintain "Copy requirements" as "002".
Data VBRK/VBRP as "002".
Regards,
Krishna.

Profit center is not Detemined in sales order for a scenario below

1. profit center is maintained in Material Master
2.Create a sales order and enter the item , hit the enter key, Profit center is shown,
3. Now delete the plant at item level and hit enter, Profit center is not shown,
4. NOW ENTER THE PLANT AGAIN AND HIT THE ENTER KEY, THE PROFIT CENTER IS NOT SHOWN AT THE ITEM LEVEL,
thanks is advance for the help !!

Hi,
Ensure that the profit center is assigned to your Sales order.
Also maintain the following settings in copy control.
Goto the T.Code "VTFA".
Select your valid combination.Details.
Double click on "Item".Select your Item category.
Details.
Maintain "Copy requirements" as "002".
Data VBRK/VBRP as "002".
Regards,
Krishna.

Changing the status of the sales order item based on reason for rejection

Hi All,
When a Sales order item is rejected then the status at the item level is changed as 'TECO'.When the reason for rejection is removed the status 'Teco' is reset.This status change can be achieved using the user exit 'MV45AFZZ'.But the exit does not allow re-atp calculation whenver a blocked item is release.I have use the exit 'MV45AFZB' ,through this the status change as well as re-atp calculation takes place.But the status changed(Based on reason of rejection) does not appear in the same screen.The change gets reflected only when the sakes order is saved and i open it again.
I want the status change to appear in the same screen.I am doing my code in the form 'userexit_check_vbap' of the exit 'MV45AFZB'. Please let me know if there are any user exits or BADI's available for the same(Changing the status of the sales order item based on reason for rejection ).
Regards,
S.Subasree

Hi subburamaiah
If you want the report you can create a separate SIS report . In that take the input field as a Reason for rejection.. and ask for the output the list of sales orders .Now when you check this user defined report you will give the reason for rejection and check what all orders got rejected on that reason for rejection.
Regards
Srinath

The sales order item & contains a different material

Hi,
Converted requisition into purchase order and now getting the following error: "The sales order item & contains a different material"
Any advice?

Hello Marianne,
Your PO seems to be created already, didn't you modify anything in it?
Did you already check in VA03 your post 380?
Génia.

How to read the Sales Order( Item ) System status?

Hi All,
My requirement is to display the System status of the sales order item*. When we go to the sales order display, if i double click on the line item , ii will lead to the next screen.Click on status tab,here we can see the Sytem staus. I would like to know the logic to read this sytem status ?
Thanks,
Suresh.

read tables VBUK, VBUP for SD document status indicators

Profit Center is missing in the line item 002 for Customer Payment

Dear Friends,
We are having one issue with Customer incoming payment. We are following the Business area concept. Now the customer is from the different business area and paying at Ho. HO has different Business area. So while processing the incoiming payment i have to enter different business ares for both the customer and Bank line item. There is no profit center field in the customer line tiem. When we are trying to post it, system is giving error message "Balancing field Profit center not there in line item 002".
If i process the same scenario with same business area for both the line item then system is picking th eprofit center from the bank line item.
Is there any possibility i can map this scenarion in the Document splitting functionality?? or else how can i process this scenario??
Regards,
Deva

Hi Lakshmipathi,
Yes the Document split has been activated. This issue is the specific one. We have different C&F location. Sales happens accross India. Hence we have created the Business area concept for each location to get the location wise balance sheet. I have also activated the zero balancing for Profit center and also Business area so that i can derive the Location wise Balance sheet.
Now the sales invoice has been processed from C&F Location. Customer deposit the Cheque directly to the Head office Bank and not at the C&F Location bank. I don't want to clear the existing open item because 50% of the cheque gets bounced. So i am booking the incoming payment without clearing the open item.
While processing the incoming payment user is entering the C&F location business area in the customer line item (Credit line item) and Head office business area for the Bank line item as the bank is at the Head office so that we can arrive the Balance sheet.
Now system is not deriving the profit center for the customer line item even though the business area wise zero balance has been activated. Recon account field status group has market as optional for profit center but in F-28 i am not able to get the profit center field (Because it is balance sheet item).
The Document type already been configure for Document split and the Recon account also categorised as Customer inthe doc splitting. I don't have any problem with document split other than this issue.
For this issue anything can be done in the document split??
Regards,
Devendran

Partner Function "Vendor" missing when the sales order is replicated to ECC

Hi Gurus,
We are facing a problem on replication of functions partners between
sales order of CRM and ECC.
We have downloaded vendors (partners of table LFA1) from ECC to CRM
following note 883162 and this replication was ok!
We have mapped all partner functions from ECC to CRM and from CRM to
ECC for distribution of partners between systems.
We must include a vendor using partner function '0000092 - Carrier' on
our sales order, which is transferred to ECC. However, when the sales
order is transfered to ECC, the vendor (which was included on CRM) is
missing.
When the sales order is created on ECC and the partner (type carrier)
is included in, the order arrives on CRM missing only the partner
number, because the partner function is there.
How to fix this problem?
Best Regards,
Nivea Faria

Hi,
See this Note : 975195
Hope this helps.
Best Regards
Shiven

Field missing in the sales order.

Hi Experts,
We have notification for which the sales orders are created.
Whenever some changes are made in the notification they get reflected in teh sales order once u open it an save it again.
But this time when we made some changes on the notification and hence opened and saved the sales order along with reflecting the changes in the sales order as per the notification one crucial field got cleared.
But we are not able to trace how is this field getting cleared.
We have tried creating new sales orders and again tried the same changes but this time no field got cleared and everything is fine.
But the original sales order still have the field blank which is important.
Please advice.

Hi,
The copying controls are same as for other notifications.
We have tried creating sales orders without changing the copy controls. But this prob has not occurred with the sales orders we are creating now. But the prob that has occured in case of original sales order still persist.
Please advice.

Sales Order - Returns change the sales order item delivery status

Hi All,
we have the following requirement from our users:
after creating a return, the original sales order should have the
delivery item status changed.The system should permit that a new
delivery can be created for sales order item already delivered / billed (a new delivery with the quantity that has being returned) but has a return document,
without increasing the sales order quantity.
Does any body got the same requirement ?
Thanks in advance,
Marcus

Hi Marcus,
After creating return order you have to do the goods receipts.But this doesn't mean that you will be able to create a delivery with the old order itself.
You have to create the order again and ahve to create a new delivery,goods issue and billing.
Another option is as Roberto said that you have to reverse the goods issue thru VL09 and then cancel(delete) your delivery and then you can create a new delivery wr.t to your original sales order.
Reward points if it helps.
Regards
Karan

System resets the sales order item price changes after save in VA02.

Hi All,
We have implemented automatic credit control at sales order level.
System is blocking the sales order once saved in VA01.
But if I do any changes in prices at item level in VA02 and save before credit releasing the sales order then system agian reset to the original prices from pricing condition records.
Can any body tell me why this is happening? I should able to change the sales order prices manually before releasing the sales order credit block. Is it possible?
Regards,
Kartheek.

Like Lakshmipathi said, you should be able to change the prices in the order even if the order is under credit limit block.
Please check the condition types which are being changed . In the condition type definition( T Code V/06) for the field Manual Changes - the value should be either "Manual entry has priority" or "....should allow to change manually...".
Also in your pricing procedure ( T Code V/08) , against your pricing procedure , please select the value for pricing type as ..."copy manual conditions and redetermine others".
Hope this helps
Regards
Sai

/DSD/SL_COCKPIT - Change the Reference in the sales order items

The requirement is to set each sales order items reference field (IHREZ) to a derived value when generating the settlement document. i want to know if anyone has done something like this before and what would be the best way of going about it?

Thanks for the replies.
@ A.L.V Ramana,
Yes they all have confirmed qty. The one thing I noticed is that only the first item is being saved to table VBBE from which MD04 is getting sa sales documents. Is there any condition that must be met in order for this table to be filled except that if the item has reason for rejection or does not have confirmed qty?
@ Anirudh.vb
Thanks for the suggestion but the users wants a real time update on MD04.
Best regards,
Andre

Can not delete a Production Order is the Sales order item is rejected?

Hello everyone,
I can not delete the production order as the Sales order line item is rejected.
Does anybody know if any configuration change is required or any work around?
Thank you,
BG

Hi,
Could you pl. explain how the production order is created?
Also did you try by choosing Function in the menu (CO02 transaction) & try to set deletion flag or Technically complete?
If so did you get any error message ?
Regards,
Senthilkumar

In which tables can I find the sales order item texts?

Experts,
In SD, we have texts on sales order item level. These texts can be filled manually or automatically via access sequences. My question is very simple: in which table can I find these texts? I want to extract them for a big number of sales orders.
Reward points if helpful answer.
Thanks

hi
try in
TVAPT     Sales document item categories: Texts
TVAKT     Sales Document Types: Texts
TVAUT     Sales Documents: Order Reasons: Texts
TVAST     Sales Document Blocking Reasons: Texts

Profit Center at header level in sales order

Hi Friends,
Is it possible to have profit center entered at header level in a sales order. If yes then where.
Regards,
Wasim.

No, profit center is always assigned at item level.
One of the reason could be, items in a sales order can have different profit centers, hence assigning at header level will impact all the items.
Regards

Profit center is missing in the Sales Order Items

Similar Messages

Maybe you are looking for