Profit center report showing double the plan value comparing to cost center
Dear Friends,
We have an issue with the profit center report wherein we have maintained forecast value in version 2 in cost centers and when we run profit center report the values are showing double the value which we maintained in cost centers. Is this the problem in running 1KE0 transaction.?. We have run 1KE0 to update the missing value by deleting the existing values, so few profit center report is corrected but many other profit center report has gone wrong.
Could you please guide me to correct the values. Business requires to see the same value in cost and profit center. Note; We have created cost and profit centers the same code and assigned to each other.
Thanks,
Lokesh
No answers yet
Similar Messages
-
Livecache remote cube report shows double the value in BW reports
Hi,
We are trying to report against livecache using remote cube and getting
doubled values in reports where as direct report against livecache is showing different results.
Transaction: RSA3
Data Souce: Livecache
Planning version: 000
Loaded one particular product
Then consensus forecast shows a value 250.
The same information if we try to access using BEx analyzer 3.x then
Consensus forecast = 500
Which is DOUBLE the value than it is using RSA3. Why is it doubling? Please let me know if you come across similar issue.
Thanks,
Sriniplease check the Remote cube contents as well. Go to ListCube transaction enter the remote cube and check the contents of that cube.
-
BPS Copy plan data from one cost center to another using vairables
Hi experts,
I am trying to copy the planning data from one cost center to another in BPS.
I have just done it using a copy function and in the parameter group entering the costs centers for source and destinations.
What I am trying now it is to let the user select what this destination cost center could be.
I don`t know if this can be done using a variable. What I am thinking is; when the user enters executes the parameter group a pop-up appear that let him select the cost center for the destination.
May be this is not possible. Can you suggest me other ways of doing this?
Thanks in advanceHi,
u can achieve this by creating a variable with the replacement type as 'User Defined Values'. You also need to enable the check box 'Input Allowed by user'. And at the planning level, in the 'Selection' tab, you should map the charecteristic (Cost Center) with the created variable. Same thing should be done at the planning package level.
Then, when you execute the parameter group, a pop-up comes asking for the value of the costcenter.
Regards,
Srinivas Kamireddy. -
Is there a way to hide some reports based on the selected values in prompt.
Hi Experts,
Is there a way to hide some reports based on the selected values in prompt.
For ex. if a year is selected in the prompt then the report should display year wise report.
If a year and half year both are selected in the drop down from prompt section then 2 reports should come.. One for year wise and another for half year wise.Kindly look into this.
Regards
AshishHi,
Use presentation values in prompts for year,half,qtr and month.Example- For year-y is presentation variable in the same way for halfyear-h,qtr-q and month-m.
create four intermediate reports.Example-Report r1 with only year column,r2 with only halfyear column,r3 with qtr column and r4 with month column.
Make column in each report(r1,r2,r3,r4) is equal to their presentation variables(y,h,q,m).
Use four sections.
Section1-Place report that should come when only year.
section2-Place report that should come for year and halfyear.
Section3-Place report that should come for year,halfyear and qtr.
Section4-Place report that should come for year,halfyear,qtr and month.
Apply guided navigation for each section selecting guided navigation-
For section1-
properties->Guided navigation->check this Reference Source Request(Yes)->select report r1(year)->check this Show Section(if request returns row)
In the same way do for remaining section2(select r2),section3(select r3) and section4(select r4)
Thanks,
Srikanth
http://bintelligencegroup.wordpress.com/ -
Unable to found from where does the Plan values are coming
Hi Gurus,
I am running the report Z_ALR_87012993 and getting values for Actual and Plan,
i want to know from where does these planned values are getting into account and where to see that planned amount for that cost element (order).
Regards,
Imran M ArabThank You All,
My problem solved,
I found the T-Code for that is KOC4, in this we can see the planned values for production orders.
Thanks again for your valuable replies.
Regards,
Imran M Arab -
Is there a report showing all the DDL objects for one APP?
Hi,
Is there a report showing all the DDL objects for one APP?
I need to move an app to my workspace. The workspace I need to move it from has approx 20 applications in it, thus all the tables, procedures, etc are too many.
What way is the easiest?
I've looked at exporting the DDL and the app. and look to see what the app needs. But it has many pages.
Thank you, BillCHello Bill,
You might find the report in the following location to be helpful:
Home>Application Builder>Application XXX>Application Reports>Shared Components>Application Database Object Dependencies
Regards,
Arie. -
What is the T-Code for creating Cost center - profit center standard hierar
Hi,
What is the T-Code for creating Cost center - profit center standard hierarchy.Please provide me the T-codes.
ThanksHi Supriya,
Create / Change Cost Center Standard Hierarchy - OKEON
Display Cost Center Standard Hierarchy - OKENN
Create Profit Center Standard Hierarchy - KCH1
Change Profit Center Standard Hierarchy - KCH5N
Display Profit Center Standard Hierarchy - KCH6N
Srikanth Munnaluri -
Hello,
I have issue like is there a way to know who changed (if automatic what is responsible for) the plan values on the WBS elements.
I know for the master data changes we need to check the change documents in project profile, and then we can see changes in CN60. But I believe it is not applicable for the transactional data.
So, is there any way to see who modified or responsible for the plan value changes.
Thank You,
GokulHello
@Kalpash
CJ3B is budget line items. I believe it is out of scope for my issue.
I looking for something on the Plan values side.
@Abdul
Can you please elaborate on it I am not able to understand what your saying. I don't understand what functionality your exactly talking about.
Thank You,
Gokul -
Changed e-mail password, showing double the amount of e-mails
I recently changed the password on my Comcast e-mail account on my iphone . When I get a notification that I have new e-mails, it will show double the amount of new e-mails that are actually in my inbox. Ex: the icon may show 10 new e-mails, but I really only have 5 in my inbox.
Any suggestions?Hello DRB1962
Check to make sure that you validated the device within your account on webmail.
iOS: Setting up Hotmail, Outlook, Live, or MSN email accounts
http://support.apple.com/kb/HT1694
Thanks for using Apple Support Communities.
Regards,
-Norm G. -
Change the planned value amount for the copied rebate recipients(Customers)
Hi,
I had copied the rebate agreement(RV15B004) for the required Rebate recipients(Customers).
Now my problem is to access each rebate agreement to change or input manually the planned value amount.
I want to change the planned value amount through BDC or any standard functionality exits for the copied rebate recipients(Customers).
Suitable answers will be rewarded.
Regards
ManojHi
What happened is an expected behaviour
If you change any dep terms - it impacts all open FY & Periods.. This is what happened in your case
You have 2 choices
1. Undo the change of life, close FY 2010 in AA and then again change the life
2. Using note 29694 you can make Posted Dep = Planned dep and the issue will be technically resolved
br, Ajay M -
Change the planned value amount for copied rebate recipients(Customers).
Hi,
I had copied the rebate agreement for the required Rebate recipients(Customers).
Now my problem is to access each rebate agreement to change or input manually the planned value amount.
I want to change the planned value amount through BDC or any standard functionality exits for the copied rebate recipients(Customers).
Suitable answers will be rewarded.
Regards
ManojHi
What happened is an expected behaviour
If you change any dep terms - it impacts all open FY & Periods.. This is what happened in your case
You have 2 choices
1. Undo the change of life, close FY 2010 in AA and then again change the life
2. Using note 29694 you can make Posted Dep = Planned dep and the issue will be technically resolved
br, Ajay M -
Change the planned value amount of copied rebate recipients(Customers)
Hi,
I had copied the rebate agreement for the required Rebate recipients(Customers).
Now my problem is to access each rebate agreement to change or input manually the planned value amount.
I want to change the planned value amount through BDC or any standard functionality exits for the copied rebate recipients(Customers).
Suitable answers will be rewarded.
Regards
ManojHi
What happened is an expected behaviour
If you change any dep terms - it impacts all open FY & Periods.. This is what happened in your case
You have 2 choices
1. Undo the change of life, close FY 2010 in AA and then again change the life
2. Using note 29694 you can make Posted Dep = Planned dep and the issue will be technically resolved
br, Ajay M -
T codes to see the payment made as per cost center
Hi Experts
can you please tell me what is the t codes to see the payment made as per cost center
Regards
NEHAHi Neha,
Use mentioned list of tcodes along with KSB1 for more details.
S_ALR_87013611 Cost Centers: Actual/Plan/Variance
S_ALR_87013612 Area: Cost Centers
S_ALR_87013620 Cost Centers: Act./Plan/Commitment
S_ALR_87013621 Range: Actual/Plan/CommitmentsS_ALR_87013620
Rgds
Suma -
Profit Center Report not include the Invoices entry
Hi Expert,
I want the report of my profit center which will show profit centre details including the dimension.
I have run the following report but not fulfill the requirements
1.The u201CProfit centre reportu201D in this report only u201CJEu201D is comes in report & Invoices post for the u201CProfit centre(Dimension1, Dimension2,Dimension3) u201Cis not included in that report.
2.The u201CGeneral ledgeru201D report it will give the details of invoices but ,it is not showing the Dim1,Dim2,Dim3 in the available column of report.
Plese help me on this.Sap version 8.8 patch 15.Hi,
You can create your own report by Crystal Report or query report.
Thanks,
Gordon -
Can profit center report drilldowen to the document entry level
Hi,
In Profit center Reporting can we drill down to the document entry level if yes how we can prepare this kind of reports.
Thanking you.
Regards
Santosh RotheHi Santosh,
Yes,
Click 2 times on the line (amount) or use the menu path Report / Other report
In the most standard reports you can drill down.
When not you can ad reports, line item overvieuw to the Report group
Transaction GR52 go to the header and under Report interface you can ad other reports or line item transaction codes
Paul
Maybe you are looking for
-
How to install and configure RSYNC on Solaris 10 SPARC
I am trying to setup two Solaris boxes to sync their two mount points in real time using RSYNC. If any update happens on Server A it should reflect on server B automatically. Use CRON or as system SERVICE, which is best? Servers are on WAN link and a
-
CSS validator having a problem with shorthand line-height
Hi, Suddenly noticed a CSS error with a simple CSS: h1 { font: 20px/100% "Times New Roman", Times, serif; } "Value Error : font / is not a font-family value : 20px / 100% "Times New Roman",Times,serif " That's the way I've always written "font." An
-
I'm troubleshooting someone's G4 Cube (500 MHz, 256 MB RAM, 30 GB HD) which has a startup issue. I assume the flashing question mark/folder at startup means that the CPU can't find the Startup Disk, but I can't resolve the problem. I ran the Apple Ha
-
Hi All, Can some one help me understand and ans. the below question 1. What is difference between 3KEI & 3KEH 2. Is there any chance of get amount difference between GLu2019S account balance and profit center amount in single posting? Eg: In
-
Error Installing Air 2.0 SDK
When I try "install" Air2.0 SDK i have this error "Directory does not contain a Flex SDK". I unzip sdk into flex sdk folders and then open Flex Builder. Inside Flex Builder go to "Window"->"Preferences"->"Installed Flex SDKs"-> ADD and select my air