Profit centre problem in VF02

I have created a material and maintained PC. I have created a sales order. I have created the billing document. while releasing billing document, system throwing error message - In line item 001 profit centre not filled.
I have checked the item details in vf03, there profit centre has been passed and displaying.
I have checked the Doc. type RV, whether it is mentioned in doc. splitting or not. Maintained.
I have checked the Customer recon a/c, whether it has maintained in Doc. splitting or not. Maintained.
What might be the reason for error.

Hi,
I have received the following error message.
Balancing field "Profit Center" in line item 001 not filled
Message no. GLT2201
Diagnosis
The field Profit Center marked as balancing is not filled with any value in line item 001, even after document splitting.
System Response
The document cannot be posted.
Procedure
First check your entries.
Additional causes could be:
No value can be derived for this field from the current document data.
You have entered a document type that is not designed for this business purpose.
Procedure for System Administration
Customizing

Similar Messages

Problem in Profit centre

hi friends
i make cash payment in FBCJ in that i assign profit centre like '4000'.but
when i post it and then after check in FBL3N G/L account documents it will display '1000' profit centre
what change i will do in configuration to get profit centre '4000' instead of '1000' in my G/L(FBL3N).
plz help me.
its urgent.
thanks in advance.

Hi,
Check whether any substitution has been written for that.
SJ

Problem with the cost centre budget is being copied to profit centres 1KE0

Hi Experts
I am trying to cost centre budget is being copied to profit centres using transaction code 1KE0. The log displays all entries were successful but does not update the table and i did run foreground and backgound.can any one help me.

sloved

New General ledger accounting in ECC 6.0 : Profit centre not in BSID table

hi,
I already create new transaction code and report from standard transaction code
*s_alr_87012168 : Customer Aging Report (Due Date Analysis for Open Items)* and i
also add Profit center fields into Dynamic selection.
My problem is, if i run the report using customer account the output is displayed but
if i run the report with customer & profit centre the output is not displayed. currently i'm using
new General ledger accounting in ECC 6.0 and when i look into bsid table the value
is empty for profit centre and the value for profit centre are stored in new table
FAGLFLEXT.
do i miss something?
thanks.

s_alr_87012168 : Customer Aging Report (Due Date Analysis for Open Items) this is a report generated.

Deleting the profit centre

hi,
I have a problem when deleting a profit center as follows :
1.when deleting from Tools in config we got the message
" profit centre scenario is active in general ledger".
2.when deleting from application menu:
            (a)The "Set to inactive " function is grayed out.
            (b)when you mark the profit center for deletion we got the message
              "profit center scenario is active in general ledger".
this happens in all clients.
please help as we are going live shortly.
your help is highly appreciated
waiting eagerly for the response.

Hi,
Try with T.code KCH5N.
Regards
Mani

Auto update of Profit Centre in JE for Opening Stock

Hi Experts,
I am using SAP B1 2007B Version and Patch level 15 and entering the Opening Stock of Items in Initial quantities,inventory tracking and Stock posting window and updating the profit centre in distribution rule but the problem is it is not getting updated in the Journal Entry when the back end JE is posting accordingly and for that again we need to update it manually. can any please help me regarding this..
Thanks,
Narsing

Profit Centres are generally applicable only for Revenue & Expense accounts.
When you load the opening balances, it affect the Inventory Account which is an Account Account and that is why there is no Profit Centre marked in the JE.

Profit centre derivation rule to derive profit centre based in Business plc

Hi,
We required "profit centre derivation rule to derive profit centre based in Business place + 9000 in such case were vendor & customers are involved and current profit center derivation logic doesnu2019t work."
For this we have mapped a substitution pertaining to all co. codes based on all the relevant posting keys for Vendor and Customer where in system will replace the profit center based on business place given in line item as Business Place + 9000. For happening this we have written a User Exit and attached the same with this substitution through t.code OBBH. Entire hting we mapped in our testing client.
But now the problem is whatever posting keys we have defined in our substitution are being used in normal payment and clearing also.
Eg : In payment document vendor is debited vide posting key No 25. where the profit centre is derived based on the invoice that gets selected.
In Normal Payment and clearing transactions, the profit centre is derived based on the profit center in offsetting line items (as per New GL Logic) currently.
Now our business requires that where ever the system is unable to derive a profit centre for vendor and customer (And giving the error " Balancing field profit center in line item 001 not filled") transactions, then at that time profit center for that line item should replace with logic Business Place + 9000 (here business place is the business place contained by that line item in which error is coming for profit center.).
How to map the same in the system through substitution / exit or any other method? Awaiting for your inputs pls. Thanks in advance.
Tapan

Still not answered.
Requesting to give some clue for the same.
Thanks & Regards,
Tapan

Profit centre information in F-02 (customer to customer / vendor to vendor)

One of our user is trying to post a FI document using F-02 for transfering from customer to customer and vendor to vendor. While doing the transaction, he is not able to give a required Profit centre in the transaction. I checked the Field status of the reconcliation accounts used and found that Profit centre is an optional field. How can the user assign a profit centre while doing these transactions ?

Hi Nikitha,
Profit Center field is not displayed in transaction screen. If you are using document splitting then profit center is derived from offsetting account and if not using then profit center is derived from F.5D execution , which ultimately derives from offsetting account.
To give remedy to this problem, it is better that you create one clearing G/L account. Let's take an example.
One clearing G/L 150000 has been created. Now customer Rs 5000 (debit balance) is to be transferred from customer 1000 to customer 2000. Entry would be.
Pkey          account            amount              profit center
40              150000             5000                  9000
14              1000                5000
Pkey          account            amount              profit center
50              150000             5000                  8000
04              2000                5000
This way profit center will remain balanced.
Regards,
Chintan Joshi.

Cost centre and Profit centre in one query - Authorisations not working!

Hiya,
I have another problem related to Analysis Authorisations.
I have created an AA with Cost Centre and Profit centre access restricted to a certain node of a hierarchy (type 1 - this node and below). For example, the User can only run a query at Cost Centres level of Country Belgium - the query works fine. Now, the user wants to drill down by the relevant Profit centres. According to the log, the system checks for Profit centres like * and says the user is not authorised. All this, despite the fact that all Profit centres belong to country Belgium and user has been given access to see these profit centres.
What do I need to do to enable drilldown by Profit centre? I can't make a "*" access to Profit centre as the user will be able to run other queries at global level, which is not what I can allow.
Any suggestions?

Hello,
I don't know if it is relevant, but I had a similar problem when I had two characteristic each with hierarchy restrictions in one authorization object.
I "solved" it by separting each characteristic into its own authorization object.
BR
Ondrej

Profit Centre Accounting Balance Carry Forward

Hi
I used report painter to create my own report to show the TB by profit centre. But the when you drill down on certain balance sheet account the actual line items date back to as far as 2004. Is it because we have done a balance carry forward? How can we correct this? If we do a balance carry forward at year-end will that correct the problem or can we do it now?
Points will be awarded.
Thanks

Dear Noz
Can u plz tell me which version ur using?
I know the standard Transaction code which can be helpful ti u
Regards
Dnyanesh

FF7B - Cash management Profit centre in the line item

Hi,
We are facing one problem at our end.
We have upgraded our system to ECC 6 with new gl activated.
Also activation of cash management (lequidity forecast) exist since 4.6C .
Now with New GL activation in place and When we run FF7B - ( Transaction to check the lequidity forecast ) it shows the summary details but when we drill-down to a line item level and copy profit centre as well as segment field from the layout for the line items the fields are appearing blank.
Is anybody have the idea how to populate or update the profit centre as well as segement field in the same line item data in future and also for the past data.
Thanks & Regards
Mahesh

this is available in Enhancement Pack 5.

Intercompany elimination at legal entity and profit centre level

All,
I have a question regarding intercompany elimination. As far as I understand, BPC can only hold one Interco dimension per application. If you want to perform an intercompany elimination for two dimensions which do not roll up into each other, two separate applications are needed. Please see example below to clarify:
Data is reported the following way:
Legal entity Profit Centre Account Interco Value
The problem is that the profit centre hierarchy does not roll up into the legal entity hierarchy mainly because there are profit centres set up as legal entities. Consequently, the legal entity hierarchy and the profit centre hierarchy are two independent hierarchies.
The business requirement is to have an intercompany elimination at profit centre and legal entity level at the same time (hence requiring two Intercos at the same time). This is needed as some of the profit centres are set up as legal entities.
Can someone advise me as to how to resolve this issue? Did anyone come across a similar problem?
Please let me know if you require any further clarifications.
Marc

Hi
Try to use 2 application for the interco elimination
for the 1st appls ur entity will be the entity dimension and use intco as intco dimension
for the 2nd one use the profit center as entity and build a new intco
As per interco logic this is using the Intco property in the Entity dimension and Entity property in intco dimension
it is very impossible to do this in one application
Thanks
CSD

During F110 run-How to pick profit centre from the Pur.Invoice line item ?

Could anyone please help me with a solution to this problem.
Purchase invoice line items have got profit centre recorded from Material master.
While doing the auto payment run F110, for foreign currency invoices, the exchange rate diff
is posted to a - realised exch rate diff gl a/c.
But there is no cost object attached.
Business wants the system to pick the profit centre from the purchase invoice line item
and put it in the line item record of the exch rate diff account.
Can I do it using OKB9 ? Could someone please explain how to do it.
Thanks

Hi,
With standard SAP this is not possible.may be you have to develop some custom program.
with my experiance,we always post to defualt cost center.
hope this helps you.
Thanks,
Rau

Linking for Internal Order with Profit Centre

Hi Gurus,
Can anybody help me out with this query that a particular Internal Order to be matched with a particular Profit Centre
If anybody have solution pls share with me
I'll assign points for your feedback
Usha

Hi,
Thanks for your reply, but my problem is i need to assign profit centre to the internal order and there is no field in that screen only company code is displayed
could you guide me what can be done to pop up that field, is it the matter of field status group? if it is, then where we can go to active this field status group, pls suggest
Your initiative in this case will be highly appreciable
Rgds,
Usha

Enhance 0MATERIAL with Profit Centre

Hi guys,
    Suppose that I have Characteristic ZMAT which gets data from 0MATERIAL_ATTR.
   However, now I need to enhance ZMAT to populate Profit Centre which resides in MARC TABLE(Not carried by data source 0MATERIAL_ATTR). Also to note that MARC data is plant specific, in other words the Profit Centre is plant specific.
   How then can I model this enhancement ?

Hi Chris,
You can create a view o MARC and include the required fields from it and then a generic data source. But then again you have to first load it to and ODS and then load it to the info object 0MAT_PLANT by creating update rules. This is what we have done and the extrctor is running fine till now. If you dont load it to the ODS you may face extractin problems for that appended field.

Profit centre problem in VF02

Similar Messages

Maybe you are looking for