Program not installed properly???

When opening QT 6.5.2 with win 98 i get...QTstreaming authoring failed to load because version of Qtstreaming and QT authoring do not match. I click ok, then get "QTstreaming extras failed to load because the versions of Qtstreaming and QT streaming extras do not match, click ok and then the player opens. Guided by an earlier recommendation, I clicked "update existing software" in the control panel and it said that the prog was not properly installed - reload. So I reloaded from the same install prog I downloaded from apple.com and still had the problem.
What do i have to do to watch mov files????? Would it do any good to download 6.5.2 from the site again? Thanks

I'd try removing QuickTime and go with a new installer.

Similar Messages

I have tried to update my itunes program. It was running great until I attempted the update now all I get is an error message that says "Itunes was not installed properly, Please reinstall itunes, Error 7 (Windows erroe 126)". What can I do to get my it

I tried updating my itune program. Now all I get is the following message "Itunes was not installed properly. Please reinstall itunes. Error 7 (Windows error 126). WHAT can I do to get back to where my itunes program is running again?
I have uninstalled the proram and tried reinstalling and get the same error message. The other error message I get is "The program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem". I have tried that twice with no luck. Can someone help me get my music back???

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

A few weeks ago I had to reinstall itunes on my PC because the latest itunes update did not install properly. Ever since doing that something called Mobile Me keeps popping up whenever I open email (outlook) and slowing it down. How do I remove MobileMe

A few weeks ago an itunes upgrade did not install properly on my PC so I had to uninstall itunes and everything associated with it. I was able to reinstall itunes and it works fine including syncing with my ipod. However, now whenever I open my email (outlook) a box pops up stating MobileMe Services has stooped working. This happens a couple of times after I click to close the program. This a nusance and really slows down getting to my email. From what I've found MobileMe was something that used to be used by itunes to sync mobile devices but is no longer used by itunes. I can't find a way to remove this MobileMe from my PC. I've tried going into Contol Panel then Programs and Features to uninstall it but there is no button there to uninstall it. Any suggestions on how this can be removed?

Do you have a backup that you can restore from? Your old hard drive seems to be the problem.

Why is my itunes not installing properly? I installed it and it was fine, then it started to show Errors. iTunes exe - Entry Point not Found. And the Error 7 (Windows error 127).Itsays to reinstall iTunes. I did that and same error. new pc, same on old

Why is my itunes not installing properly?
I installed itunes day before yesterday, I spent hours last night linking all my music photograph and movie files, its a new windows 8 laptop.
I plugged in my 64GB ipad 3 rebooted it and reloaded all the information I wanted on it, took hours... finally completed this this morning. After this I restarted the laptop to configure my icloud link for the laptop (which I installed last night while I was loading files, I chose to restart later)
on completion I turned my laptop off for a few hours, when I turned it back on I went to itunes to connect my iphone to do the same and I got this message:
iTunes exe - Entry Point Not Found
The procedure entry point
AVCFPlayerAppliesMediaSelectionCriteriaAutomaticallyKey could not
be located in dynamiclink library F:\Programmes\iTunes.dll
                                                                                           OK
then after pressing 'OK' the following message:
iTunes
iTunes was not installed correctly. Please reinstall iTunes
Error 7 (Windows error 127)
I went back to apple website to reinstall iTunes, first reinstalled it same again, then unsinstalled it and the reinstalled it, same again.
The same thing happened with my old lap top and I replaced it with this new one at the start of the week.
Has anyone any idea what is going on and how to rectify this problem, I am now going on 3 weeks without iTunes.
Regards,
Damian36

I started up and plugged in my iPad and then the following message came up:
       iTunes
❗️This iPad cannot be used because the required software is not
    Installed. Run the iTunes installer to remove iTunes, then install
    the 64-bit version of iTunes.
                                                                                         OK
I then proceeded to the "iTunes64Setup" expanded folder to load "AppleMobileDeviceSupport64"
Started the install and then received this message:
      Apple Mobile Device Support
❗️Service 'AppleMobile Device' (Apple Mobile Device)
    failed to start. Verify that you have sufficient
    Privileges to start system services.
   Abort.               Retry.                Ignore
I tried all tree options, last being ignore.
I continued to download the other 2 you suggested with out any drama.
I did a system restart and then opened iTunes.
Connected my iPad
Then message appears:
      iTunes .exe - System Error
❌ The program can't start because CoreAdioToolbox.dll is missing from
      Your computer. Try reinstalling the program to fix the problem.
                                                                                       OK
Press OK and then the next message:
       iTunes
❌ iTunes was not installed correctly. Please reinstall iTunes.
      Error 7 (Windows error 126)
                                                                                       OK
Any suggestions?

PLEASE HELP! - when i go to open up itunes this message appears "This copy if itunes is corrupted or not installed properly" If i remove itunes will i lose all my bac ups?

when i go to open up itunes this message appears "This copy if itunes is corrupted or not installed properly" If i remove itunes will i lose all my bac ups?

Let's try a repair install of iTunes first.
Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "iTunes" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "iTunes", click "Change" and then click "Repair".
Can you launch your iTunes now?

Icloud control panel does not install properly but only when trying to sync with Outlook 2010. If I try to sync photos, etc. it works just fine

Downloaded icloud control panel to Win 7. Everything seems ok until you "apply" synching at the icloud control panel. Then you get an error message that says "icloud control panel did not install properly". Repairing in Windows control panel as suggested does not help. If you do not try to sync Outlook data (2010) then it seems to work just fine.

I was able to finally stop ITunes from crashing after many days of searching n restarting my computer many times.
a) First I went to this site ->http://forums.techarena.in/guides-tutorials/1119812.htm that showed me how to disable DPE. Please make sure that u have good virus...etc.. protection first before doing this. I have Avast Internet Security. RESTART UR COMPUTER..
b) I then uninstall ITunes by following this site ->http://support.apple.com/kb/ht1923 RESTART UR COMPUTER..
c) I then downloaded a beta version of ITunes. I happen to download beta 7 before the final of 10.5 version came out. Installed it. After installing I click on it n it said somewhere along the line of "this ITune ver. expired" I checked in my Programs n Features n notice that QuickTime was installed w that beta version.
d) Go online n download the final version of ITunes ->http://www.apple.com/itunes/download/ ...... After u finish dling install that. After that's done connect your IPod, IPhone...etc... n click on ITunes, it should sync all the way.
I was finally able to sync all thru the steps insteading of it crashing on me midway. Hopefully this will work for you. Good luck !
IPhone4, Gateway Windows Vista 32bit

Itunes not Installed Properly, Repaired and no luck.

Hi. I haven't been able to create a CD for about 2 years now. I searched through these forums and found other ways of Repairing the Itunes program and have had no luck. I've repaired through downloading Itunes again, when Menu pops up, I choose to Repair ( too afraid to uninstall, and lose data). That finishes and I re-open Itunes, and still receive the same message ( Itunes not installed properly, you cannot burn/import a CD). I saw on a post on this forum about repairing it through my Windows Control Program ( Add / Remove) - did that, thought it worked out but did not. Do I need to restart my computer for changes to occur ? I also ran the itunes Diagnostics and these are my results.
Also, I see that it states I'm not the Adminstrator..... I am ?
Microsoft Windows 7 x64 Ultimate Edition Service Pack 1 (Build 7601)
Sony Corporation VGN-SR520G
iTunes 11.0.4.4
QuickTime 7.7.2
FairPlay 2.4.14
Apple Application Support 2.3.4
iPod Updater Library 10.0d2
CD Driver Not Available
CD Driver DLL 2.1.3.1
Apple Mobile Device 6.1.0.13
Apple Mobile Device Driver 1.64.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 0037BDB8096213E8
Current user is not an administrator.
The current local date and time is 2013-08-06 15:49:16.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
Intel Corporation, Mobile Intel(R) 4 Series Express Chipset Family
Intel Corporation, Mobile Intel(R) 4 Series Express Chipset Family
**** External Plug-ins Information ****
No external plug-ins installed.
Genius ID: bacbfef65266ce1f14880911ab02cf41
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name:    {18D4A6E8-F45A-4F28-9AD0-F9C8D88563EA}
Description:    Bluetooth Device (Personal Area Network)
IP Address:    0.0.0.0
Subnet Mask:    0.0.0.0
Default Gateway:    0.0.0.0
DHCP Enabled:    Yes
DHCP Server:
Lease Obtained:    Wed Dec 31 16:00:00 1969
Lease Expires:    Wed Dec 31 16:00:00 1969
DNS Servers:
Adapter Name:    {0FDB6DF3-7F90-400A-88BB-35067E7A6DE7}
Description:    Intel(R) WiFi Link 5100 AGN
IP Address:    192.168.0.7
Subnet Mask:    255.255.255.0
Default Gateway:    192.168.0.1
DHCP Enabled:    Yes
DHCP Server:    192.168.0.1
Lease Obtained:    Tue Aug 06 15:37:23 2013
Lease Expires:    Tue Aug 06 16:37:23 2013
DNS Servers:    71.9.127.107
        68.190.192.35
        24.205.224.36
Adapter Name:    {9E496D44-0552-48DF-AF8E-708D23F5BA00}
Description:    Marvell Yukon 88E8040 PCI-E Fast Ethernet Controller
IP Address:    0.0.0.0
Subnet Mask:    0.0.0.0
Default Gateway:    0.0.0.0
DHCP Enabled:    Yes
DHCP Server:
Lease Obtained:    Wed Dec 31 16:00:00 1969
Lease Expires:    Wed Dec 31 16:00:00 1969
DNS Servers:
Active Connection:    LAN Connection
Connected:    Yes
Online:        Yes
Using Modem:    No
Using LAN:    Yes
Using Proxy:    No
Firewall Information
Windows Firewall is on.
iTunes is NOT enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was successful.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2013-08-06 15:48:50.
**** Device Connectivity Tests ****
iPodService 11.0.4.4 (x64) is currently running.
iTunesHelper 11.0.4.4 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) ICH9 Family USB Universal Host Controller - 2934. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2935. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2936. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2937. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2938. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2939. Device is working properly.
Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293A. Device is working properly.
Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293C. Device is working properly.
FireWire (IEEE 1394) Host Controllers:
Ricoh 1394 OHCI Compliant Host Controller. Device is working properly.
Most Recent Devices Not Currently Connected:
iPod touch (4th generation) running firmware version 6.1.3
Serial Number:
iPhone 5 (CDMA) running firmware version 6.1.4
Serial Number:
iPad 2 running firmware version 6.1.3
Serial Number:
**** Device Sync Tests ****
No iPod, iPhone, or iPad found.

Hello Craz4Sk8erGuy
If you uninstall iTunes, you will not lose any data if you uninstall iTunes, the iTunes database file will not be removed. Check out the article below on how to completely uninstall iTunes and its associating services. Also, I found an article for burning issues with Sony burners as well.
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/HT1923
Burning disc in iTunes for Windows using a Sony CD-RW/DVD CRX830E model drive fails with 4280 error
http://support.apple.com/kb/ta38101
Thanks for using Apple Support Communities.
Regards,
-Norm G.

Tried to upgrade and after uninstalling and reinstalling several times, keep getting "procedure entry point could not be located in dynamic link library" followed by "iTunes was not installed properly" Error 7.....Help, please??

Tried to upgrade as instructed and after uninstalling and reinstalling (even back to the former iTunes which I was happy with)several times, keep getting message "Procedure entry point could not be located in dynamic link library" followed by "iTunes was not installed properly" "Error 7". Help, please??

Entry point errors can usually be fixed by deleting the offending dll, then repairing the component it is part of from the programs and features control panel. Unfortunately you neglected to include the detail of which dll is mentioned.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2

CS5 not installing properly

I tried to install CS5 yesterday (from boxed disk of the software received directly from Adobe) and it did not install properly and/or completely. First I got a bunch of errors and then when I tried to install it again, it appeared to have done so but no files were ever extracted and no PS icons ever appeared on my desktop. I went searching for the software on the c: drive and finally found it under program files (x86). However, when I try to open it a bunch of sub folders appear and there is nothing to unzip, etc. I don't understand what happened.
The laptop I'm using is an HP G71-340US. Intel Core Duo 2 T660, MS Windows 7 Home Premium 64 bit, 2.2GHz, 4GB DDR2 AM, Intel Graphics Media Accelerator 4500MHD, 320 GB Sata Hard Drive, Duel layer DVD +/- RW...
I have Photoshop Elements 8 installed as that's what I've been using.
I don't understand why CS5 will not install and unzip. Can anyone help?

Did you check the Start menu?
Do you have these files on your system?
C:\Program Files (x86)\Adobe\Adobe Photoshop CS5\Photoshop.exe
C:\Program Files\Adobe\Adobe Photoshop CS5 (64 Bit)\Photoshop.exe
If you do have these files, what happens when you try to execute them?
-Noel

After the last update for OSX 10.9.5, I get messages stating that I need to re-install the update because it did not install properly - How do I do this

On September 24, I got a message from the App Store saying there was an update of the Operating System on my MacBookPro laptop - OS X 10.9.5 - once I updated it, I got a message saying that there was an error in the update and that it did not install properly and that I should re-install the update. I have no idea how to do this. Can anyone help me?

You can manually download the Combo update if in doubt of the integrity of the OS 10.9.5
install on top of what you have, backups are always a good idea.
OS X Mavericks 10.9.5 Update (Combo)

My 10.8.3 update did not install properly citing an 'Unknown Error'. Now, my Mail and Mac App Store aren't working. What went wrong and how do i fix it ?

My 10.8.3 update did not install properly citing an 'Unknown Error'. Now, my Mail and Mac App Store aren't working. What went wrong and how do i fix it ?

I tried this and still have the same problems. If I open Address book or the Mac App Store I get the library rebuild popup and a hang. I created a fresh user and then things are better apart from the printing issue. Its clearly some 3rd party software issue but the crash logs are meningless to me. I used the excellent Etre check app from http://www.etresoft.com/etrecheck so I have a list of what is being loaded and can compare clean and crashed user info but as I cant work out which of the startup items, launch agents, launch daemons etc that are causing the problem.
I have eliminated Dropbox, Mac Keeper and Witness, and it isnt related to my exterrnal LED cinema dispay or my external thunderbolt drives, or any USB devices if thats any help to anyone else. Info from Etrecheck follows -
Kernel Extensions:
          com.oxsemi.driver.OxsemiDeviceType00          Version: 1.28.7
          com.rogueamoeba.InstantOn          Version: 6.0.2
          com.rogueamoeba.InstantOnCore          Version: 6.0.2
          com.Cycling74.driver.Soundflower          Version: 1.5.3
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
             [not loaded] com.adobe.fpsaud.plist
             [not loaded] com.adobe.SwitchBoard.plist
             [not loaded] com.bombich.ccc.plist
             [not loaded] com.dymo.pnpd.plist
             [not loaded] com.intego.BackupManagerPro.daemon.plist
             [not loaded] com.micromat.TechToolProDaemon.plist
             [not loaded] com.microsoft.office.licensing.helper.plist
             [not loaded] com.orbicule.witnessd.plist
             [not loaded] com.sierrawireless.SwitchTool.plist
             [not loaded] com.stclairsoft.AppTamerAgent.plist
             [not loaded] org.macosforge.xquartz.privileged_startx.plist
             [not loaded]          pcloudd.plist
Launch Agents:
                 [loaded] com.divx.dms.agent.plist
                 [loaded] com.divx.update.agent.plist
                 [loaded] com.epson.epw.agent.plist
                 [loaded] com.lacie.raidmonitor.daemon.plist
                 [loaded] com.lacie.safemanager.daemon.plist
                 [loaded] com.micromat.TechToolProAgent.plist
                 [loaded] com.orbicule.WitnessUserAgent.plist
                 [loaded] org.macosforge.xquartz.startx.plist
User Launch Agents:
             [not loaded]          .DS_Store
                 [loaded] com.adobe.AAM.Updater-1.0.plist
                 [loaded] com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae.plist
                 [loaded] com.digitalrebellion.SoftwareUpdateAutoCheck.plist
                 [loaded] com.divx.agent.postinstall.plist
                 [loaded] com.google.keystone.agent.plist
                 [loaded] com.propaganda.dejavu.dvmonitor.plist
                 [loaded] com.valvesoftware.steamclean.plist
                 [loaded] com.zeobit.MacKeeper.Helper.plist
User Login Items:
          iTunesHelper
          Synergy
          TomTomHOMERunner
          Dropbox
3rd Party Preference Panes:
          Déjà Vu
          Flash Player
          Flip4Mac WMV
          GR-55
          Paragon NTFS for Mac ® OS X
          Perian
          Printopia
          TechTool Protection
          Witness

Field type TaxonomyFieldTypeMulti is not installed properly when opening Site columns page or saving site as template

I have a site collection which I am moving from a SharePoint 2013 enterprise server to a SharePoint 2013 foundation server. This all seems fine apart from when I try and access the Site columns page (from Site settings) or when I save a Site as a template
- both times I get the error: Field type TaxonomyFieldTypeMulti is not installed properly
If I look in the SharePoint logs I get the following:
Unable to locate the xml-definition for FieldName with FieldId '249a1c1a-5a3e-4173-abad-779b01892510
Any ideas?
Many Thanks,
Jenny

I have re-done the migration from Enterprise to Foundation and now get the following error:
Field type RatingCount is not installed properly. Go to the list settings page to delete this field.
However I cannot go to the Site columns page as I get this error so don't see where I can delete this from? Previously I had to delete this field manually from each of the Blog sites but this time there don't
appear to be these fields to delete - I presume because I disabled all the features relating to this premigration?
Any ideas?
Many thanks in advance,
Jenny

"One or more field types are not installed properly" when I try to add a second discussion board web part to a page

I have a SharePoint 2010 site with two discussion boards. I added one additional field to each of the boards: a lookup to another list to link the discussions to individual projects. I need 2 different boards because they have different posting permissions
(one is open to all for comments, and one is open only to the project team to post but everyone can read).
When I go to the pages for each of the discussion boards, they work fine.
But I'm putting together a page for individual projects, and want to have web parts for both discussion boards on the same page, showing the discussions related to the selected project.
I am able to add one of the discussion boards to a web part in the page, but when I add the second discussion board to the page, the new web part contains:
One or more field types are not installed properly. Go to the list settings page to delete these fields.
Correlation ID: blah blah blah
I've searched for similar postings, but mostly I see this error message related to migration from 2007 to 2010 -- this is not the case here: I created both discussion boards, and the whole site, in SP 2010. I've also found this message related
to coding errors using SPQuery. I am not doing any coding here, just using the built-in SharePoint 2010 Edit Page -> add a web part -> select the discussion list. I tried doing it from SPD with the same result.

I figured it out. I was using ?FilterField1=fieldname&FilterValue1=value on the URL to the page to pick out one project number. The web part I was trying to add was for a list that did not have that particular fieldname. I didn't realize that would matter
since I was using the Connections -> Get Filter Values From to get my filter values from the main web part, which does have that fieldname.
I added a field with that fieldname to the other list and set a workflow to copy the lookup value of the project number lookup field into the new field. Now all is working fine. Sorry for the wild geese in my original question.

One or more field types are not installed properly. Go to the list settings page to delete these fields.

Hi Team,
I have created Administrator -approved Infopath form template to my site and activated same template in CA.
I have used this template in one of my Form library and i can able to submit the Form with success to the library.
when i click "View Item" or "Edit Item" of the form it throws , "One or more field types are not installed properly. Go to the list settings page to delete these fields." error message.
I have refered my log files also but there is no useful information in that, please find my logs for your reference.
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
Logging Correlation Data
xmnv
Medium
Site=/sites/Prototypes
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
Monitoring
b4ly
High
Leaving Monitored Scope (PostResolveRequestCacheHandler). Execution Time=8.51588679566816
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
General
8kh7
High
One or more field types are not installed properly. Go to the list settings page to delete these fields.
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
General
8sl1
High
DelegateControl: Exception thrown while adding control 'ASP._controltemplates_publishingconsole_ascx': One or more field types are not installed properly. Go to the list settings page to delete these fields.
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
General
8kh7
High
One or more field types are not installed properly. Go to the list settings page to delete these fields.
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
Runtime
tkau
Unexpected
System.Runtime.InteropServices.COMException: One or more field types are not installed properly. Go to the list settings page to delete these fields.
at Microsoft.SharePoint.Library.SPRequestInternalClass.GetListItemDataWithCallback2(IListItemSqlClient pSqlClient, String bstrUrl, String bstrListName, String bstrViewName, String bstrViewXml, SAFEARRAYFLAGS fSafeArrayFlags, ISP2DSafeArrayWriter pSACallback,
ISPDataCallback pPagingCallback, ISPDataCallback pPagingPrevCallback, ISPDataCallback pFilterLinkCallback, ISPDataCallback pSchemaCallback, ISPDataCallback pRowCountCallback, Boolean& pbMaximalView)
at Microsoft.SharePoint.Library.SPRequest.GetListItemDataWithCallback2(IListItemSqlClient pSqlClient, String bstrUrl, String bstrListName, String bstrViewName, String bstrViewXml, SAFEA...
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
Runtime
tkau
Unexpected
...RRAYFLAGS fSafeArrayFlags, ISP2DSafeArrayWriter pSACallback, ISPDataCallback pPagingCallback, ISPDataCallback pPagingPrevCallback, ISPDataCallback pFilterLinkCallback, ISPDataCallback pSchemaCallback, ISPDataCallback pRowCountCallback, Boolean& pbMaximalView)
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
Monitoring
b4ly
Medium
Leaving Monitored Scope (Request (GET:http://test-sharepoint:80/sites/Prototypes/TRT/TRTLibrary/Forms/EditForm.aspx?ID=47&Source=http%3A%2F%2Ftest%2Dsharepoint%2Fsites%2FPrototypes%2FTRT%2FTRTLibrary%2FForms%2FAllItems%2Easpx&RootFolder=%2Fsites%2FPrototypes%2FTRT%2FTRTLibrary&ContentTypeId=0x01010100E7EE25E5A6898C4587A6B52C808EF03300FD54861D587A7E43BA3E2E6D392A3526&IsDlg=1)).
Execution Time=32.443369199158
w3wp.exe (0x08E4)
0x2C58
Access Services
Data Layer
8jg2
Medium
ResourceManager.PerformCleanup: Disk Manager: CurrentSize=0.
w3wp.exe (0x08E4)
0x2C58
Access Services
Data Layer
5pbr
Medium
ResourceManager.EvictUnusedItems: Disk Manager: Going to evict unused items. CurrentSize: 0.
w3wp.exe (0x08E4)
0x2C58
Access Services
Data Layer
5pbs
Medium
ResourceManager.EvictUnusedItems: Disk Manager: After unused items eviction. CurrentSize: 0
Diff:0.
w3wp.exe (0x2D7C)
0x0774
SharePoint Foundation
Topology
e5mc
Medium
WcfSendRequest: RemoteAddress: 'http://test-sharepoint:32843/4ac2daef5ffe4850be08bd7bbebb5ac2/MetadataWebService.svc' Channel: 'Microsoft.SharePoint.Taxonomy.IMetadataWebServiceApplication' Action: 'http://schemas.microsoft.com/sharepoint/taxonomy/soap/IDataAccessReadOnly/GetChanges'
MessageId: 'urn:uuid:dcba94c3-2764-428c-b44f-60e703328ceb'
w3wp.exe (0x08E4)
0x2E24
SharePoint Foundation
Topology
e5mb
Medium
WcfReceiveRequest: LocalAddress: 'http://test-sharepoint.anca.com.au:32843/4ac2daef5ffe4850be08bd7bbebb5ac2/MetadataWebService.svc' Channel: 'System.ServiceModel.Channels.ServiceChannel' Action: 'http://schemas.microsoft.com/sharepoint/taxonomy/soap/IDataAccessReadOnly/GetChanges'
MessageId: 'urn:uuid:dcba94c3-2764-428c-b44f-60e703328ceb'
Jeeva

Hello,
Is there any other content type on library or check if there is any duplicate column? Could you please also show us your library columns detail? (pic is also fine of lib settings page)
If you have any ""Property Promotion" column then SP create those columns as site column and associate them with this template so check "Allow management of content types" for that form library as well.
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help

One or more field types are not installed properly. Go to the list settings page to delete these fields. nativehr 0x81020014 /nativehr nativestack /nativestack

Hi ,
I am working in sharepoint 2013, This is a custom timer timer Execute method where i am moving a document item from one library to other once its expired,it was running fine and suddenly giving following error:-
One or more field types are not installed properly. Go to the list settings page to delete these fields.<nativehr>0x81020014</nativehr><nativestack></nativestack>
StackTrace = " at Microsoft.SharePoint.SPGlobal.HandleComException(COMException comEx)\r\n at Microsoft.SharePoint.Library.SPRequest.GetListItemDataWithCallback2(IListItemSqlClient pSqlClient, String bstrUrl, String bstrListName,
String bstrViewName, String bstrView...
I have filled all the meta data(site column) for the item but still same error, Please help me out as i have no clue why it is giving this error
public override void Execute(Guid targetInstanceId)
SPSecurity.RunWithElevatedPrivileges(delegate()
using (SPSite site = new SPSite(sourceUrl))
using (SPWeb web = site.OpenWeb())
//gets the document lib
SPList listFrom = web.Lists[sourceList];
//gets the expired documents items
SPQuery query = new SPQuery();
query.ViewFields = "<FieldRef Name='Expiration_x0020_Date'/>";
query.Query = @"<Where><Leq><FieldRef Name='Expiration_x0020_Date'/><Value Type='DateTime' ><Today /></Value></Leq></Where>";
SPListItemCollection items = listFrom.GetItems(query);
//if expired items found
if (items.Count > 0)
SPFile oFile = null;
foreach (SPListItem item in items)
string strfile = item.File.Name;
oFile = web.GetFile(sourceList + "/" + strfile);
//oFile.CopyTo("Archive/" + strfile);
oFile.MoveTo(destinationList + "/" + strfile);

Hi,
I think the issue is related to the internal name of the Expiration Day.
In the caml query code lines, we should use the right internal field name to retrieve and filter the list items.
To avoid such mistake, we can use the CAML Designer tool to generate the caml query code.
We can download the tool here: http://www.camldesigner.com/?p=594
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Program not installed properly???

Similar Messages

Maybe you are looking for