Programs for activation of transfer rules
Can anybody give me the programs for activation of transfer ruls and update rules.
Hi
The programs are:
RS_TRANSTRU_ACTIVATE_ALL(Transfer Structure activation)
RSAU_UPDR_REACTIVATE_ALL(Update Rules activation)
To activate all the source systems using the program RSAR_LOGICAL_SYSTEMS_ACTIVATE.
Regards
Shilpa
Similar Messages
-
Conversion exit error while activating the transfer rules
Hello gurus,
We are doing a function module extraction with 3.X data sources.
On activating the transfer rules , i am getting a conversion exit error for "0fiscyear", but in the infoobject we don't have the conversion exit for it.
Points will be awarded for any kind of response.
Thanks and Regards,
Anu.Hi,
1. Please check in the transformation, its necessary to provide the fiscal variant mapping as well when ur mapping fiscal year object. as on the basis of that value fiscal period will be derived.
2 I guess ur doing direct mapping (Time conversion) and there is no routine written for that. if any u can check that as well for any error.
Thanks
dipika
Edited by: Dipika Tyagi on Jun 25, 2008 7:39 AM -
Activation of transfer Rule not available: Help Sought
Hi All,
I have encountered error in loading data due to
dataSource not having the same status as the source system in the Business Information Warehouse. There is a timestamp difference. The recommended solution in HELP was to replicate the datasource again and activate the transfer rules.... I have done the prescribed replication but have not been succesful in activating the transfer rules. The activate button is disabled. I tried to delete the transfer rule and assigned it again. But still the activate button is disabled?
Thanks! Hope you can help ASAP.
PhilipsHi,
Replicate the datasource first. Then once you are done with that. Run the program RS_TRANSTRU_ACTIVATE_ALL in SE38. You will get a selection screen . Give the Source system name and the infosource name execute. This would activate your transfer rule. We use this in the production enviornment. -
Failure while activating the transfer rules
Hi,
While activating the transfer rules, in that process when the system is trying to activating the transfer structure an error is occuring.
Following is the error log.
FREELISTS 004
FREELIST GROUPS 01)
PARTITION BY RANGE (PARTNO)
PARTITION "/BIC/B00077630000000000002" VALUES LESS THAN
(0000000002))
ORA-00604: error occurred at recursive SQL level 1 ORA-01654: unable to extend index SYS.I_CON1 by 1
DDL time(___1): .......167 milliseconds
The SQL statement was not executed
Table /BIC/B0007763000 (Error adjusting the database)
Table /BIC/B0007763000 was not activated
Obj_act >>(___1): ..00:00:01 hh:mm:ss
Following is the log from System Log(SM21) for the same
BY2 Database error 604 at EXE
BY0 > ORA-00604: error occurred at recursive SQL level 1#ORA-01654
BY0 > unable to extend index SYS.I_CON1 by 1065 in tablespace SYST
BY2 Database error 604 at EXE
Every time when I try to activate the transfer rules, it generates a new table "/BIC/B000xxxxxxx".
Let me know if any more details required.
Though there is a SAP Notes(513758) with Symptom which is same as our problem, its of not much use. It only says search for other SAP Notes with KeyWords from error log. We couldn't find a relavant SAP Notes sofar.
Please guide us in resolving the issue.Hi Aswani,
To further prevent this from occuring, you should assign a BASIS person to monitor the BW system using tcode <b>DB02</b> and watch out for critical objects prior loading process. That way, this error could have been prevented.
You can also device a way to predict which table spaces are needed to adjusted on a scheduled basis based on your actual data growth.
--Jkyle -
Run time error while activating the Transfer Rules
Hi,
Error when activating Transfer rules for Infosource :
0FI_GL_1 -
(General ledger: Transaction figures)
Run time error : ASSERTION FAILED
Transfer rules traffic light is in Green. But when i am trying to activate the Transfer rules, its giving Run time error.
Thanks,
KishoreHi,
As mentioned in the note 939383 , either Import Support Package 08 for SAP NetWeaver 2004s BI (BI Patch08 or SAPKW70008) into your BI system or do correction instructions given in the note.
It is always better to import the latest patches avialble in service market to avoid this type of problems.
Also see tha note 1010672 amd check whether it is applicable to your problem.
With rgds,
Anil Kumar Sharma .P
Message was edited by:
Anil Kumar Sharma -
Issue with the activation of transfer rules
Hi,
I am working with the datasource 0PRODUCT_TEXT, and I am trying to install transfer rules from BI Content and unable to get the active version.
But the transfer rules are showing inactive and the error is as follows.
Error generating program
Message no. RSAR245
Diagnosis
An error occurred during program generation:
Template: RSTMPL80
Error code: 6
Row: 47
Message: Statement concluding with "...LIKE" ended unexpect
Procedure
Correct the template to remove the problem
Please help me in this issue.
Thanks in advance,
Rama Murthy.Try to run RSActivate* all transfer rule program that will activate the inactive transfer rules. Don't forget to replicate the datasource once again before you run the program.
thanks.
Wond -
Two issues: activation of transfer rules and data load performance
hi,
I have two problems I face very often and would like to get some more info on that topics:
1. Transfer rules activation. I just finished transport my cubes, ETL etc. on productive system and start filling cubes with data. Very often during data load it occurs that transfer rules need to be activated even if I transport them active and (I think) did not do anything after transportation. Then I again create transfer rules transports on dev, transport changes on prod and have to execute data load again.
It is very annoying. What do you suggest to do with this problem? Activate all transfer rules again before executing process chain?
2. Differences between dev and prod systems in data load time.
On dev system (copy of production made about 8 months ago) I have checked how long it takes me to extract data from source system and it was about 0,5h for 50000 records but when I executed load on production it was 2h for 200000 records, so it was twice slower than dev!
I thought it will be at least so fast as dev system. What can influence on data load performance and how I can predict it?
Regards,
AndrzejAksik
1 How freequently this activation problem occurs. If it is one time replicate the datasource and activate thetransfer structure( But in general as you know activation of transfer structure should be done automatically after transport of the object)
2 One thing for difference of time is environmental as you know in production system so many jobs will run at the same time so obiously system performance will be slow compare to Dev System. In your case both the systems are performing equally. You said in dev system for 50000 records half an hour and in production 200000 records 2hrs so records are more in Production system and it took longer time. If it is really causing problem then you have to do some performance activities.
Hope this helps
Thnaks
Sat -
Regarding not activation of transfer rules
hi sdn,
I generated a generic datasource the fields from r/3 are:-vbeln,erdat,netwr,waerk. when i wanted to activate the transfer rules and transfer structure then this error comes :-
<b>Transfer structure ZNAINDS_HA does not exist
Message no. RSAR440</b>
the info object i'm using
0doc_number
0createdon
onet_val_hd
0doc_currcy
when i cheked in service.sap.com then they are saying install support pak 4 for 3.5
but we are already using sp 17 for 3.5
can u tell me what is the problem is
i already
replicated the datasource.
mapping is done correcctly in transfer rules
wat to do pls guide me
<b>points promised</b>Hi Rubane
Please check following
1. Check on your R/3 source system first RSA1-> Source system-> right click on your R/3 system and Check
2. try Restore in same menuu for your R/3 system
3. Replicate the datasource
4. Now manually activate the transfer rules
5. still if it is a problem then in SE38 tcode run the program RS_TRANSTRU_ACTIVATE_ALL
Regards
Pradip
Sunil Tayade alias sunraj: How are you doing?
Program name is program RS_TRANSTRU_ACTIVATE_ALL -
BE3.5 : Error from the source system while activating the transfer rule
When I was trying to activate the transfer rule for one info object( charateristic with master data) , I got the following error in [[ ]]
Error when creating transfer structure /BIC/CCPIZGR00CC_ATTR in source system CI2220
Diagnosis
An error occurred when creating transfer structure /BIC/CCPIZGR00CC_ATTR as an IDoc segment in source system CI2220 .
System response
The action was terminated. No data was changed.
Procedure
Use the generation log in source system CI2220 to identify the error, and remove the cause.
CI2220 is the backend R/3 system, I had no issue in replicating the data source etc. this error occurred while trying to activate the transfer rule after assigning the info source to the replicated datasource in BW.
Can anybody tell me how to view( what transaction etc) the generation log to understand the issue?
Thanks in advance
ArunabhaHi Arunabha,
I would confrim that there is no issue with the datasource in your r/3 system. Can you run the datasource on your r/3 system with no errors using RSA3?
If the datasource is ok, then I would check out the error message number in OSS or SDN. I have seen this error before, I just cannot recall what the fix was.
Cheers! -
Activation of transfer rules...
Hi Everyone,
I can't seem to activate the transfer rule I defined... Whatever could be wrong? I've tried all of the regeneration of this and that to no avail. Can anyone help me out please? Thank you!
Philips ManalaysayHi,
Re: Issue related to Transfer rules
Posted: Feb 26, 2007 8:15 AM in response to: DK Reply
U can activate the transfer structure by a program..
execute this in SE38...
RS_TRANSTRU_ACTIVATE_ALL..
key in ur infosource and the source system name and execute
TCODE -- SE16 AND EXECUTE above and then give the datasource name -
Program for activating transformations
Hi All,
Can you plz tell me is there any standard program to activate transformations in BI.
Thanks,
Chella.Hi,
By using program RSDG_TRFN_ACTIVATEwe will activate Transformations and their corresponding DTPs automatically.
But for this we have to implent the sap note.
Regards,
Sai -
Error : Activating transfer rules
Hello Experts,
I get the message "Error Generating Program" while activating the transfer rules.
The detailed error message refers to RSAR245 or note 636217. Note refers to table row size being exceeding 1962 bytes. But my transfer structure row size is below 300 bytes.
Any suggestions appreciated.
Thanks,
SweathaHi Sweatha,
Sometimes I have experimented this kind of error when activating transfer rules. It seems that there is some content in the buffer that provokes this error. I suggest you to log off the system, login again and try to activate the transfer rules.
Regards,
Andreu -
Hi All,
After activating the Transfer Rules (means ) what will happen in bw side . I mean what about psa & Transfer structure? In the backend of the system exactly what happens while activating T.R's?(what structure formats will create).
Its my interv ques. Pls help me.
Thanks inadvance,
K. Yogeswaran.Hi,
When you activate transfer rules your BW will create an extract structure, a PSA table, generate a program to write the extracted records into your PSA, generate a program for the transformation of your extract structure into the communication structure (you TRules).
The PSA table is having exactly the same structure than your extract structure. Now imagine that you had data already in your PSA table. If you remove a field from your extract structure, that would mean remoiving a field from your PSA table.
Since you will loose data, the system will generate a new version of your PSA table. You can check the PSA table versions in table RSTSODS. Adding a field to the extract structure won't result in a new PSA table.
hope this helps
Olivier. -
Transfer Rules is not Activated in BWQ System
Hey all,
I am transporting the Infocubes from BWD to BWQ. I got an error in "errors occured during post-handling RS_After_Import for ISCS L" and "the errors affect the following components: BW-WHM (Warehouse Management)"
I had assign the "conversion of logical systems names" in BWD and BWQ.
The detailed error can be viewed under this path:
http://h1.ripway.com/aywen/TransferRulesDeactivatedinBWQ.zip
thanks...Hi,
Just check the connection parameters between BWQ and the source system. If it is ok then Replicate the data sources bfore activating the transfer rules.
Still the problem exists try this functional module in SE38 to activate the transfer rules: RS_TRANSTRU_ACTIVATE_ALL
Hope this will help you.
Rgs,
I.R.K -
Transfer Rules not activating 0PROFIT_CTR_ATTR
Hi,
I am activating Transfer Rules for 0PROFIT_CTR_ATTR from production, it's giving me a error
" Data element for InfoObject WAERS 0OBJ_CURR could not be created
Message no. RSAR274
Diagnosis
Special data elements of the type and length of the source system are required for creating the transfer structure. Errors occurred while creating a data element of this type for InfoObject WAERS 0OBJ_CURR. The data element should be of type CUKY and length 000005. The technical name of the data element is /BIC/OW_######################.
Procedure
Check the log.
Check data element /BIC/OW_###################### in the repository. Activate data element /BIC/OW_###################### in the repository and check the activation log, if necessary. "
Kindly help me.
Regards
Manna DasHi,
Dont understand why are you activating the transfer rules in production system directly.
We normally activate objects in development system and transport to quality and production environment.
if you are trying to activate the transfer rules directly then you need to check if all the dependent objects are collected and activated in BI system.
Looking at the error message i feel that curreny field is missing in the transfer rules ... Just read the datasource fields and see if there are any fields missing related to currency.
Regards,
Anup
Maybe you are looking for
-
Problem with Audigy 4 and Asus m
I own an Asus A8V motherboard, and just purchased the audigy 4 non-pro. While playing the game F.E.A.R. (main reason I bought the soundcard) with acceleration to the max, I will receive a BSOD (blue screen of death) with the 0x0000007F error code. Wh
-
Question about backing up for whatsapp
My phone has been crashing and freezing often lately, so I was thinking of doing a reset. Can I know if my media, pictures and videos get backed up as well when I backup my phone? Has anyone had problems with backups before? Such as data being messed
-
okay, so the other day i went to turn on my iPod and it said the battery was very low, so i went to plug it into the computer to charge, and it got stuck on the "do not disconnect" screen. i attempted to reset the iPod and all it did was flash the ap
-
The user is posting his GRN via ML81N. When he pushes the SAVE button after going through the entire process he is prompted with the following error: AAss Error message RC= 3 ZAA002 This particular message can not be traced. This problem occurs
-
Ale/idoc configuration Guide
Hi, Hi i am trying to create ale/idoc scenario between my two clients. Can any one tell me steps by steps configuration of that. Regards, Gurprit Bhatia