Activating Transfer Rules
Hi All,
After activating the Transfer Rules (means ) what will happen in bw side . I mean what about psa & Transfer structure? In the backend of the system exactly what happens while activating T.R's?(what structure formats will create).
Its my interv ques. Pls help me.
Thanks inadvance,
K. Yogeswaran.
Hi,
When you activate transfer rules your BW will create an extract structure, a PSA table, generate a program to write the extracted records into your PSA, generate a program for the transformation of your extract structure into the communication structure (you TRules).
The PSA table is having exactly the same structure than your extract structure. Now imagine that you had data already in your PSA table. If you remove a field from your extract structure, that would mean remoiving a field from your PSA table.
Since you will loose data, the system will generate a new version of your PSA table. You can check the PSA table versions in table RSTSODS. Adding a field to the extract structure won't result in a new PSA table.
hope this helps
Olivier.
Similar Messages
-
Error : Activating transfer rules
Hello Experts,
I get the message "Error Generating Program" while activating the transfer rules.
The detailed error message refers to RSAR245 or note 636217. Note refers to table row size being exceeding 1962 bytes. But my transfer structure row size is below 300 bytes.
Any suggestions appreciated.
Thanks,
SweathaHi Sweatha,
Sometimes I have experimented this kind of error when activating transfer rules. It seems that there is some content in the buffer that provokes this error. I suggest you to log off the system, login again and try to activate the transfer rules.
Regards,
Andreu -
Error while activating transfer rules needs help.
The error while activating 0FI_AP_6 transfer rules is listed below.
''InfoObj. 0DEBITOR from fld KUNNR of dataSource 0FI_AR_6 is not active but BCT ex. -> Dtl'' how to resolve this issue and activate transfer rules?Hi
The problem is with your data source replication.
Activate your data source & replication too.
Activate your transfer atructure through RS_TRANSTRU_ACTIVATE_ALL .
If not so, Activate your transfer rule manually.
Regadrs
Saravanan.ar -
Dump when activating transfer rules
Hi All,
I am trying to create transfer rules and activate from a DB connect source system and I am getting the following error when activating.
Runtime Errors ASSERTION_FAILED
Short text
The ASSERT condition was violated.
What happened?
In the running application program, the ASSERT statement recognized a
situation that should not have occurred.
The runtime error was triggered for one of these reasons:
- For the checkpoint group specified with the ASSERT statement, the
activation mode is set to "abort".
- Via a system variant, the activation mode is globally set to "abort"
for checkpoint groups in this system.
- The activation mode is set to "abort" on program level.
- The ASSERT statement is not assigned to any checkpoint group.
Can somebody help me with this error?
Thank you.BI User
Please check the OSS Notes 914998 and 791549 and see these notes helps
Thnaks
Sat -
Activating transfer rules for new source system
Hi
we are having 2 R/3 source system in BI. I had activated all the transfer rules with the first source system and now i have created a new source sytem connecting to a different R/3 client. I tried to change the transfer rules point to the new source system using the program RS_TRANSTRU_ACTIVATE_ALL giving the new source system and the infosource name. But i get the error "No Transfer Structure Selected" when i execute the prg.
how can i change the source system without creating the transfer rules for the new source but use the existing transfer rules and just change the source system assigned to it????
Regards
SujaiHi Sujai,
There are many cases when this program is used.
When the Trans rules get de-activated due to impact,we need to first replicate the data source and activate the TR using this program.This generally occurs during the data loads in prd.
It does not makes sense to transport it when there r no changes done to the TR.So simply,u can use this program to activate.
If the program does not work,then you are left with the transport option.
Thanks & Regards,
Suchitra.V -
While activating Transfer rules....
Hello BW gurus,
I am extracting CO Transaction Data from SAP R/3 into BW. I replicated 0CO_OM_CCA_1 standard Data Source into BW and assigned BI Content 0CO_OM_CCA_1 Info Source .
1) In the Transfer rules , all the fields from Data Source got mapped to the fields in Communication structure , other than those fields I find some fields(extra) in communication structure which are empty, I mean those fields did not get mapped .
1) what is the reason behind it , what is the main concept ?
2) how do I map these extra fields in communication structure ,and activate Transfer rules?
Points will be alloted ,
Thank you .Hi Prarthana,
It is not mandatory that all the fields in Communication structure get mapped to the fields retrieved from source system. You can have extra fields in the communication structure means you can map some more fields from source using another data source by assigning same Infosource.
Without mapping them, you can activate Transfer rules and load data.
You can map them and load data into other fields using another datasource.
Hope this helps u...
Regards,
KK. -
Error while activating transfer rules
Transfer method 'TRFC with PSA' is not supported by the source system
Message no. RSAR508
Diagnosis
The PSA transfer method is used to transfer data from source system GBQ480 to transfer structure 0ASSET_ATTR_G4. Source system GBQ480 does not support a PSA transfer.
Procedure
Define the PSA in the source system.Change Transfer method to PSA in Transfer rules and then activate. If PSA is selected, you will not face this error.
If you still face this error even after changing Transfer method, check below thread.
Transfer method 'TRFC with PSA' is not supported by the source system
Edited by: koundinya karanam on May 22, 2008 12:47 PM -
BI Content Error when activating transfer rule / SAPSQL_ARRAY_INSERT_DUPREC
Hello Experts,
when i want to iinstall the transfer rule /CRMBW/OLTP_OPPORTUNITY_ITEM
from Data Source /CRMBW/OLTP_OPPORTUNITY_ITEM to InfoSource
/CRMBW/OPPORTUNITY_I (all Business Content Objects) Iam facing the following situation:
1. When I use "Simulate Installation" i get the warning for all of the fields: Field APP_SERVER is not supported by DataSource /CRMBW/OLTP_OPPORTUNITY_ITEM in source system SLOGICOCRM. Transfer rules were deleted however, delivered.
2. When I use "Installation" i get a dump of the following type:
Runtime Errors SAPSQL_ARRAY_INSERT_DUPREC
Except. CX_SY_OPEN_SQL_DB
Error in the ABAP Application Program
The current ABAP program "CL_RSAR_FORMULAS==============CP" had to be
terminated because it had come across a statement that unfortunately cannot be executed.
More details of the dump are:
Trigger Location of Exception
Program CL_RSAR_FORMULAS==============CP
Include CL_RSAR_FORMULAS==============CM00E
Row 40
Module type (METHOD)
Module Name GENERATE_ACTIVE_VERSION
The problem is, i can not map the transfer rule by myself because the the transfer structure contains some important Routines and Formulas which are missing in thereports and i dont know the source code they are using.
Can anybody help me?
Greetings from Barcelona
Oliver
Edited by: STRATESYS CONSULTING on Jul 23, 2009 2:35 PMHi Oliver,
Can you please check if you can use the SAP notes 1263075 and 985052 to resolve the problem?
Best Regards,
Des -
Problem in activating Transfer rules
Hi Experts,
I could not able to activate transfer rules using program "RS_TRANSTRU_ACTIVATE_ALL" by giving source system name and Infosource in Quality system.I am getting success status "No Transfer Structure Selected" but still transfer rules are in inactivate.I tried replicating data sources also still problem persists.
Please provide any suggestion how can i go about it.
Edited by: Sunilbm on Oct 30, 2009 12:16 PMHi,
Is there any error message when the transfer rules are transported from Dev to Quality?
Are the transfer rules transported from Dev to Quality successfully.
Post the message if any when the transport request is moved from Dev to Quality.
Regards,
Rama Murthy. -
Error when activating transfer rules
Dear Experts,
I am getting the following errors when trying to activate my transfer structure. I am working on a system that has been just upgraded. So, any idea of what the problem could be?
Here is the error:
Mapping between data source 0FI_AR_3 and source system AMC_103 is inconsistent
Message no. RSAOLTP380
Thank you very much.Hi venkat
Please check the OSS note 606437
Sriram -
Run time error while activating the Transfer Rules
Hi,
Error when activating Transfer rules for Infosource :
0FI_GL_1 -
(General ledger: Transaction figures)
Run time error : ASSERTION FAILED
Transfer rules traffic light is in Green. But when i am trying to activate the Transfer rules, its giving Run time error.
Thanks,
KishoreHi,
As mentioned in the note 939383 , either Import Support Package 08 for SAP NetWeaver 2004s BI (BI Patch08 or SAPKW70008) into your BI system or do correction instructions given in the note.
It is always better to import the latest patches avialble in service market to avoid this type of problems.
Also see tha note 1010672 amd check whether it is applicable to your problem.
With rgds,
Anil Kumar Sharma .P
Message was edited by:
Anil Kumar Sharma -
Transfer Rules not activating 0PROFIT_CTR_ATTR
Hi,
I am activating Transfer Rules for 0PROFIT_CTR_ATTR from production, it's giving me a error
" Data element for InfoObject WAERS 0OBJ_CURR could not be created
Message no. RSAR274
Diagnosis
Special data elements of the type and length of the source system are required for creating the transfer structure. Errors occurred while creating a data element of this type for InfoObject WAERS 0OBJ_CURR. The data element should be of type CUKY and length 000005. The technical name of the data element is /BIC/OW_######################.
Procedure
Check the log.
Check data element /BIC/OW_###################### in the repository. Activate data element /BIC/OW_###################### in the repository and check the activation log, if necessary. "
Kindly help me.
Regards
Manna DasHi,
Dont understand why are you activating the transfer rules in production system directly.
We normally activate objects in development system and transport to quality and production environment.
if you are trying to activate the transfer rules directly then you need to check if all the dependent objects are collected and activated in BI system.
Looking at the error message i feel that curreny field is missing in the transfer rules ... Just read the datasource fields and see if there are any fields missing related to currency.
Regards,
Anup -
NO PSA for InfoSource and source system 120 : Maintaing Transfer Rules
Hello BI Experts ,
I am working on Generic data source extraction.
Earlier I mapped all fields infoobjects in Transfer Rules and then loaded data to ODS properly.
But later on I made few changes in Generic data source view and exits in the R3 and replicated the data source to BI.
Then Remapped the fields to infoobjects in Transfer Rules.
Now I can see Transfer Rules Green and all fields are mapped properly.
But when I activated Transfer Rules I am getting message that ,
"There is no PSA for InfoSource ZPS_DATA_BB and source system 120 "
Data source is active in R3.
Communication Structure and Infosource are Active in BI.
Regards ,
Amol K.hello Surendra ,
I did the same thing already.
I was looking for some otherway.
Thanks for reply.
Regards ,
Amol K. -
Is there away to activate all Transfer Rules after a client copy at once?
Our Basis team recently created 2 new clients from copying our existing dev & qa systems they then changed the partner profiles and source systems to point to our new ecc clients but we now cant get anything to run without activating transfer rules trying to do this one at a time twice is going to take a long time is there anyway of doing this en masse?
Hi
you may have to use following FM too
RS_COMSTRU_ACTIVATE_ALL Activate all inactive Communication Structures
RSAU_UPDR_REACTIVATE_ALL Activate Update Rules
and then
RS_TRANSTRU_ACTIVATE_ALL Activate Transfer Structure
Regards
Sudeep -
Conversion exit error while activating the transfer rules
Hello gurus,
We are doing a function module extraction with 3.X data sources.
On activating the transfer rules , i am getting a conversion exit error for "0fiscyear", but in the infoobject we don't have the conversion exit for it.
Points will be awarded for any kind of response.
Thanks and Regards,
Anu.Hi,
1. Please check in the transformation, its necessary to provide the fiscal variant mapping as well when ur mapping fiscal year object. as on the basis of that value fiscal period will be derived.
2 I guess ur doing direct mapping (Time conversion) and there is no routine written for that. if any u can check that as well for any error.
Thanks
dipika
Edited by: Dipika Tyagi on Jun 25, 2008 7:39 AM
Maybe you are looking for
-
How do multiple family members use iTunes.? One account or multiple?
How do multiple family members use iTunes. One account right now but apps gets added to all devices and iTunes messages go to all devices. Can multiple accounts be setup and still have ability to share purchased items?
-
i konw there have been programs to use swing on j++, but how about on its upgrade, j#? anyone know if there is a way or there is something in the makes or if there is any way to take the javax package and put it into the j# program file any solutions
-
Trouble connecting ipod video to itunes
I recently had a problem with my ipod video (sad face, exclamation point blah blah blah) and exchanged it to get a brand new one at the apple store. I tried to connect my new ipod and here's what happened (and didn't happen): (1) the screen on the ip
-
Hi! I need a custom data grid, explaining: I need to made custom list of specific files, in the System data grid I can use the drag and drop files to desktop, but how I made the drag and drop work in the custom data grid of list of files? I tried to
-
Using Room API inside Web DynPro
Hello, I've developed a Web DynPro Application which uses the Room API of the KMC. Unfortunately I can not set the Service Reference variable "com.sap.netweaver.coll.shared" as mentioned in the guide. A Deploy Exception will be thrown ("Missing Argum