Programs/Infotypes due to OS change

hi guys,
We have Seperate HR system where i want to analyse the changes occur in Custom infotype/custom Programs due to OS level changes.
When Operating system level changes from Unix to solaris. What are the places
in Custom programs/HR modules has to be considered for change settings.
for eg : File path or Calling External program or external applications.
I want listings of places where i have to check for the changes to be adapted to work as same as Unix system. Basically i want to know the places where changes generally required in HR system with respect to SAP R3 4.6C system level.
Any notes suggestion also welcome. Thanks in advance.
Suggestion please.
Thanks.
Ambi

I have freshly installed Mountain Lion and CS 5.5 and the problem is still occuring. How's that possible, I have no idea, but it obviously isn't a Mavericks issue.
I am also experiencing similar weirdness in Illustrator and Acrobat.
If anyone has any theories, I'd love to hear them.

Similar Messages

What program do I need to change the resolution of a photo?

What program do I need to change the resolution of a photo that is currently a low-res .jpg? I previously had photoshop, but it did not transfer to my new Mac Lion - and it is too expensive to repurchase. Curious if there is there an alternative option? I cannot open hi-res files anymore, and would love a solution. Thanks!

Take a look at Pixlemator in the App Store

On my MacBook Pro, sometimes when I click to close tabs in Safari the button will not work. I have to click on some other part of the screen and then it will. This happens in other programs like Word/Excel for changing font, etc. Solution/Suggestions?

On my MacBook Pro, sometimes when I click to close tabs in Safari the button will not work. I have to click on some other part of the screen and then it will. This happens in other programs like Word/Excel for changing font, etc. Solution/Suggestions?

Start up in Safe Mode.
http://support.apple.com/kb/PH4373

Rebate Agreement - No correction due to value change

Dear Friends,
I am facing a problem in Rebates. When I am opening the Rebates Agreement, the system prompts the following message "The sales volume for agreement _________ is not current." I have tried using the T-Code VBOF but the system prompts for the following error -
9202507314 (Billing Doc No) No correction due to value change
9202507363 (Billing Doc No) No correction due to value change
I have checked both the billing Document and checked for changes but there is not changes that was made to the billing Document.
Kindly suggest a solution.
Reagrds
Vineet Jain

Dear Vineet,
I have the same problem while running VBOF few billing documents are showing as not updated with the message "No correction due to value change".
But I have found that those documents are belongs to other agreements of the same customer number.
Can you please help me, which sap note should apply to over come this error message.
Thanks in advance.
Anjan Kumar.

What is module pool programming?how we can change the standard screen?

Hi EXPERTS
what is module pool programming?how we can change the standard screen using module pool programming ?
please explain with example.

Check the below link:
http://wiki.ittoolbox.com/index.php/FAQ:What_is_module_pool_program_in_abap%3F
http://help.sap.com/saphelp_46c/helpdata/en/35/26b1aaafab52b9e10000009b38f974/content.htm
http://sap.mis.cmich.edu/sap-abap/abap09/sld011.htm
http://sap.mis.cmich.edu/sap-abap/abap09/index.htm
http://www.geocities.com/ZSAPcHAT
http://www.allsaplinks.com/files/using_table_in_screen.pdf
http://help.sap.com/saphelp_webas630/helpdata/en/9f/db9cdc35c111d1829f0000e829fbfe/content.htm
http://www.sapdevelopment.co.uk/dialog/dialoghome.htm
http://www.sap-img.com/
http://help.sap.com/saphelp_46c/helpdata/en/08/bef2dadb5311d1ad10080009b0fb56/content.htm
http://www.sapgenie.com/links/abap.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c9/5472fc787f11d194c90000e8353423/frameset.htm
You can also check the transaction ABAPDOCU which gives you lot of sample programs.
Also you can see the below examples...
Go to se38 and give demodynpro and press F4.
YOu will get a list of demo module pool programs.
One more T-Code is ABAPDOCU.
YOu can find more examples there.
See the prgrams:
DEMO_DYNPRO_TABLE_CONTROL_1 Table Control with LOOP Statement
DEMO_DYNPRO_TABLE_CONTROL_2 Table Control with LOOP AT ITAB
http://www.geocities.com/ZSAPcHAT
http://www.allsaplinks.com/files/using_table_in_screen.pdf
regards,
venkat.

Reminder Workflow does not recalculate new date to send email, if due date is changed

I created a basic reminder workflow using due date, and status column. it works well.
Let's say, I want to send a reminder email 2 days prior to the due date.
I used Add -2 to due date and set a variable
then used Pause variable
if status is not equal to completed
then send email
And I have this set to initiate when a new item is created, and modified.
However, if the due date is changed, it does not recalculate the new date to send the reminder email. Help!

Hi MonalisaM,
The in-progress workflow instance will be unable to re-start itself when list item is modified, but I think you can design workflow with using the second workflow to update the list item one filed, then this update triggers
the first workflow again.
Stop this reminder workflow (first workflow) when due date is changed, then this will trigger the second workflow to change another custom column(e.g. Flag), then the first workflow will be triggered due to this custom column
Flag value changed by second workflow, I mean the second workflow is used to upadate this custom list item one filed(e.g. Flag) in order to trigger the reminder workflow(first workflow).
You can read the following article for more information to understand how to make the first workflow re-start by using second workflow.
http://sharepoint713.blogspot.com/2011/09/sharepoint-designer-workflow-to-send.html
Thanks
Daniel Yang
TechNet Community Support

6110 - 1 or more alarms missed due to time change

Wheneevr Is et a calendar alarm it does not go off, but instead, when I check the calensdar, I get the "1 or more alarms missed due to time change" message.
Now - the time has not changed (other than to increment by the second as one would expect); the time is not being updated by my network provider (this option is disabled by default), so what is the problem?
How can I avoid this? Does the calendar alarm function actually work?
[Latest 3.58 firmware, phone was reformatted with the new firmware too]Message Edited by 6110nav on 29-Aug-200701:06 PM

I can create this error on demand on my 6120 Classic. Very easy:
1) Enter the calender mode.
2) Delete all entries and alarms before current date (just for the purposes of ensuring there are actually no alarms that could have been missed).
3) Enter a new alarm today, say 2 hours from now. Set the alarm to go off 1 hour from now (the times can be anything in the future, so long as you can complete the rest of these steps before the alarm should go off).
4) Turn the phone off.
5) Turn the phone on.
6) Enter the calender > "1 or more alarms missed due to time change"
If you create the meeting with no alarm, you don't get the error. If you create a memo or any of the other calender entry types, you don't get it. You get the error with the steps above and NO other entries in the calender. It is independent of using "network operator time" and independant of any of the "sync" options for the reminder. I have on occasion have the error come up without having to restart the phone, but I believe that was when the day has gone from yesterday to today with an alarm set to go off today, and it'll show the error the very next time you enter the calender in this situation.
I went to the place I bought my phone and asked for a free swap (seeing as I bought the phone within 30 days), and the new phone did exactly the same, first time. I kept the old one, and will be giving it to the local Nokia Care shop tomorrow. WHEN (not if!) they can't fix it (seeing as I have the latest firmware, and even another brand new phone did the same error in 10 seconds flat), Nokia will have to make a new firmware! Hopefully you guys with the 6110 can recreate the error in this exact same way - I assume yours run on S60 too.

My pc user is nt changing at the program files though i've changed it at user account control

my pc user is nt changing at the program files though i've changed it at user account control

Hi @pastorhumphrey,
Welcome to the HP Forums!
It is a terrific place to find answers and tips!
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I grasp you are having a difficulty with your Windows accounts. Here are two links that I think may help.
Create a user account
User accounts: FAQ
If you are still having an issue with the accounts, I suggest contacting Microsoft support for assistance.
1 800 642 7676 Microsoft Corporation Customer service
or Microsoft Contact Us
Good Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

1532E MAP disassociating - Cause=Radio reset due to configuration change.

Hello,
have a1532E MAP with WLC 2504 and 7.6.100.0 that shows oddly enough "Cause=Radio reset due to configuration change" and the interface resets.
Any idea how this comes about without any changes made.
Relevant log attached.

After updating to 7.6.120 we've noticed that some of our AP's wouldn't come up. After looking in the switch's logs I found this
chassis: Ports PoE usage has exceeded threshold of 80%.
The power drawn is 117w (show power-over-ethernet).
When I use the following command: show power-over-ethernet brief I get this:
PoE | Power Power Alloc Alloc Actual Configured Detection Power Pre-std
Port | Enable Priority By Power Power Type Status Class Detect
----- + ------ -------- ----- ----- ------ ----------- ----------- ----- ------
1 | Yes low lldp 17 W 7.0 W Delivering 3 off
2 | Yes low lldp 17 W 7.0 W Delivering 3 off
3 | Yes low lldp 17 W 6.8 W Delivering 3 off
4 | Yes low lldp 17 W 7.1 W Delivering 3 off
5 | Yes low lldp 17 W 7.0 W Delivering 3 off
6 | Yes low lldp 17 W 6.9 W Delivering 3 off
7 | Yes low lldp 17 W 6.8 W Delivering 3 off
8 | Yes low lldp 17 W 6.7 W Delivering 3 off
9 | Yes low lldp 17 W 6.9 W Delivering 3 off
10 | Yes low usage 17 W 0.0 W Disabled 3 off
Port 10 is where the missing AP is on.
How is it possible that after the update to 7.6.120 the AP won't work anymore?

[svn] 3966: Fix incremental compile which broke at some point since Flex 3 due to compiler changes .

Revision: 3966
Author: [email protected]
Date: 2008-10-30 06:40:39 -0700 (Thu, 30 Oct 2008)
Log Message:
Fix incremental compile which broke at some point since Flex 3 due to compiler changes.
ResourceManager.fetch() assumes a local file and uses java.io.File to check if the file exists. Files within swcs such as framework.swc$Assets.swf and framework.swc$default.css will never exist so they triggered a recompile. For now, put the dependency on the swcArchive file itself since that does exist in the file system.
The dependency checking is still weak and could use some more work but at least now it doesn't recompile every time when there are no changes.
QE Notes: None
Doc Notes: None
Bugs: - SDK-17715
Reviewer: Paul
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-17715
Modified Paths:
flex/sdk/trunk/modules/webtier/j2ee/servlet/src/java/flex/webtier/server/j2ee/BaseCompile Filter.java

I enabled the settings in the labview.ini
I found some text files that looked like logs "LabVIEW_8.5_Matt_cur.txt" "LabVIEW_8.5_Matt_log.txt". Which contained some error logs and call after I tried to compile. I attached some logs from my attempts to compile. For the errors that referenced a vi and a statechart guard, I remade the vi and the referenced guard. The others all have
..... /drawmgr.cpp(3570) : DAbort: Couldn't create 24 pen Error ==0
in common and some had a
....../image.cpp(13927) : DWarn: could not get hdc error = 0
warning. I'm guesing these are related to the graphical problem I'm getting with explorer. But since I can't decode the call stack I'm not sure what the source is (assuming the cause is within the call stack).
It looks like LV 8.6 Beta is going to open soon. Does anyone know if Vision will work with it? And Is there any kind of obligation to use the beta regularly? Since if it doesn't help much, I'd probably just end up removing it.
Matt W
Attachments:
errors.zip ‏7 KB

Collection Segment closed due to configuration change

Hi
Our collection supervisor had created new collection groups and assigned them to the colleciton segment. But when she goes into the UDM_BP_GRP transaction to change the collection group assignment to the BP, she is getting this error message:
UDM_BUPA_MSG002 - Collection Segment closed due to configuration change
But the collection segments are still released, assigned to the collection profile. Nothing has changed except that new collection groups have been added.
Has anyone seen this issue before?
Thanks,
Chait

Mark,
Thanks for your reply. The new groups are assigned to the collection segments in the same profile. I tried to change the profile manually in BP thinking that would refresh the segments. But it did not make any difference. Note that it is UDM_BP_GRP that is not working, we can still change the group in the BP directly (UDM_BP).
I never had this issue before and I couldn't find anything on OSS.

Due to attribute change run(sid's is missing)...process chain is failed

Hi All,
Due to attribute change run (SID's is missing) process chain is failed.kindly suggest me how we can rectify for this issue.
Thanks
Ragav

if master data is loading at same time while the attr/hier change run is occuring,it cause the change run to fail.
Usually u get error message like..user ALEREMOTE has locked the MD tables..
Wait for some time and then try attr change run manually by going to rsa1->tools->apply hier/attr change..
if it still shows locked..try to see in rsmo if a MD load has got stuck..
else..see in sm12 to find lock is on which tables..
last resort..delete lock forcefully from sm12..
first option is wait for some time and give a try again..
cheers,
Vishvesh

Can't delete folders in d:\Program Files due to TrustedInstaller

Hi
I have a new c: drive (its an SSD and I love it), but now I'd like to delete the Program Files on my second drive (which used to be my primary drive). I followed the instructions found in this forum below (I couldn't past a link here because apparently my
account is not verified).
1. Please navigate to the target file/folder.
2. Right-click on the file/folder and choose Properties.
3. Click the "Security" tab and see if your current user is listed in the "Group or user names" list. If not, please click Edit-> Add button, type the name of your current user in the "Enter the object names to select "
box, then click "OK" to add this group.
4. Select the user from the list and then check the "Allow" checkbox next to "Full Control".
5. Click the Advanced button and click the "Owner" tab. Then, press "Edit" button.
6. Select current user from the list and check the "Replace owner on subcontainers and objects" checkbox.
7. Click "OK" to save changes and wait for Windows 7 to transfer the ownership of all the objects on the partition.
8. Click OK again to save changes and exit the Properties window.
but when I try to delete the folder, windows 7 says
"Are you sure you want to move this folder to the Recycle Bin?"
I select Yes, then I get
"You'll need to provide administrator permission to delete this folder"
I select Continue, and then get
"You need permission to perform this action
You require permission from Administrators to make changes to this folder"
I've tried running windows explorer as Administrator
I've checked my user account and it shows me as Administrator
I've verified that the owner is Administrators and that they have "full control" permissions on the folder.
What else do I check? I've checked other posts and can't figure out what I'm missing.
Cheers2u

This could be due to the folder/file permission issue just as ZigZag3143x explained.
Aditionally check these
Learn How to Take or Assign Ownership of Files and Folders
http://technet.microsoft.com/en-us/magazine/ff404240.aspx
File and Folder Permissions
http://technet.microsoft.com/en-us/library/bb727008.aspx

Running Payment Program before Due Date

Hi Gurus,
I have a problem.
I want to run the payment program -Tcode F110- before the due date and I need the document posting date to be the same as the due date.
How could I sort it out?
Please help,
Samuel

Your requirement can't be fulfilled by standard set-up, because SAP payment run can post with only one posting date in a single run. This posting date will be what you are entering in the parameters, and system will not split payment posting date separately based on Due date. You can group your items based on due date and can pay future due items as well but you can't split your payment posting with different payment posting date based on due date in a same payment run.
You can possibly do following workaround.
- Run vendor open item report (T-code FBL1N) and sort it based on Net Due column (if net due date column is not available change the layout to populate it). And decide for items with which due dates you want to settle today. Lets say you want to settle for following due date xx/xx/xxx, xx/xx/xxx1, xx/xx/xxxx2
- Then you should run three payments run separately.
Payment run 1 parameters- Posting Date=xx/xx/xxxx, Next Posting Date=xx/xx/xxxx+1
Payment run 2 parameters- Posting Date=xx/xx/xxxx1, Next Posting Date=xx/xx/xxxx2
Payment run 3 parameters- Posting Date=xx/xx/xxxx2, Next Posting Date=xx/xx/xxxx3
Imp: Note that Posting date=Due Date and Next Payment Run Date=Due Date1 in the parameters+
This will involve more than one payment runs in a day but will satisfy your requirement
Thanks
Ranjit

Autoinvoice master program parameters due date adjustment days

Hi Gurus,
I creates the Credit Memo through Autoinvoice master program ,
and every thing is as per user requirement .
but now user demands that in credit memo he need due date 5 days advance to transaction Date .
So to solve this issue I m changing the Parameter value as
Base Due date on trx Date =Yes
Due date Adjustment Days =5
But still it gave me the same result (Due date and Transaction Date is Same)
Plz Help ......
Regards,
Dushyant Kumar

HI Gurus,
I m waiting for the reply,
Plz help to resolve this issue.
Regards,
Dushyant

Programs/Infotypes due to OS change

Similar Messages

Maybe you are looking for