Project Cycle Time report

Hi,
Our aim is to get the count of days which the project rely in each phase. For instance the project created in Kick off phase on some date then it is advanced to Contract phase on someother date and finally into Completed phase, we have to get the No of days the project where in Kick off phase and no of days in Contract phase.
Is there any table store the timestamp or log to track these changes and advancing stages.
It would be really helpful if somebody throw some light on this.
Thanks,
Sasikumar Duraisamy

Hi Sasikumar,
Please look for table FCI_DOC_WORKFLOW_HISTORY. In this table look for the rows having PARENT_CLASS_ID as 1100.
1100 is the class id for Project.
FCI_DOC_WORKFLOW_HISTORY contains the history for all phase transitions made by a particular document. It also conatins some extra rows that the system inserts whenver a phase transition occurs. You can filter out these extra rows using appropriate values for the following two Enums : EVENT_TYPE and ACTION.
Once you can fetch the correct rows from the table it should be simple to calculate the cycle time.
Please do some analysis on the value of these Enums before wirting your code because they are essential for fetching correct results.
Thanks
Devesh

Similar Messages

Logic for quality clearence to warehousing cycle time report

Hi,
I am developing a report on it,i know that Movement Type 101 and Y11(Transfer with in plant) is used for it. I want to know which tables or tcodes to be used for it for making the flow of the report (i dont want to use MSEG and MKPF tables).

Hi,
MB1A,MB1B are the T codes where u can do these Transactions.
MBLNR is the Docuemnt number field which .So use this field and click on WHERE USED LIST IN SE11 T code u will get other alternate tables.
If u dont use MSEG I can understande but i think there is no issues in using MKPF
Regards

Run time error while executing Project Info system Reports

Hi,
I would like to inform while running project infosystems reports (CN41/41N / cns41 etc), it is taking long time & most of the time run time errors are coming. I observed due to more objects in projects, run time error is coming. Request you to suggest to fix the issue.
Thank you for your cooperation.
Regards,
Rakesh Pradhan

Hi,
I would like to inform while running project infosystems reports (CN41/41N / cns41 etc), it is taking long time & most of the time run time errors are coming. I observed due to more objects in projects, run time error is coming. Request you to suggest to fix the issue.
Thank you for your cooperation.
Regards,
Rakesh Pradhan

Run time Error while executing Project Info system Reports (CN41/CN41N)

Hi,
I would like to inform while running project infosystems reports (CN41/41N / cns41 etc), it is taking long time & most of the time run time errors are coming. I observed due to more objects in projects, run time error is coming. Request you to suggest to fix the issue.
Thank you for your cooperation.
Regards,
Rakesh Pradhan

Hi,
I would like to inform while running project infosystems reports (CN41/41N / cns41 etc), it is taking long time & most of the time run time errors are coming. I observed due to more objects in projects, run time error is coming. Request you to suggest to fix the issue.
Thank you for your cooperation.
Regards,
Rakesh Pradhan

Project Online Time Zone Settings Issues

We just start use Project Online for our project management. We set the SharePoint Online > Site Settings >
Regional Settings to "(UTC +08:00) Kuala Lumpur, Singapore" and we are confirm that our host located either in Singapore or Hong Kong. However, we found that the date and time display in the check-out/in
project message, in the PDP-Workflow Status page, task submission, and the Administration Settings that has time references are different with our timezone.
We sent Service Request to Microsoft Support and we been advised to wait for the next version of Project Online. To avoid the confuse happen to our Project Team, we have to set the Regional Settings back to "(UTC -08:00) Pacific Time (US and
Canada)". However, this is 16 hours different
in our region!
We all know that time is very important in a project management and reporting. We have >30 on-going projects in the Project Online and some of them are estimate to take years to complete.
Therefore, anybody faced this issue and appreciate it if you could give us any advice or sharing any workaround here. Thank you in advance.

Hi Paul,
Is the timezone mismatch only present in the checkout/check-in notification displayed on the PDPs?
Thanks,
Roland
Hi Roland,
I noticed it happen in:-
"Entry Date" and "Completion Date" for PDP - WorkflowStageStatus in the All Workflow Stage list. (if you are using Enterprise Project)
Check-out/Check-in notification displayed in PDP - Schedule, and some columns' datetime value in the Schedule.
Synchronization date and time that displayed in PWA Settings - Manage User Sync Settings. (if you are using Project Permission Mode)
Task Submission date and time.
~Kim

Lead / Cycle time for procurement

Hi,
Is there a T Code which gives me the lead time / cycle time for the complete process from PR-PO-GR. Or I need to develop a report. FS for any Report developped will be appreciated.
Regards,
Anubhav

As per your reqs, there is no such report exist in the system. you have to create the custom report

Bex Query po cycle time

Hello everybody
I am relatively new here; I have to calculate po cycle time(srm application) in my query and also report some other stuff. Question is how to calculate date feilds like difference of date feilds. And then i am having big issue with finding these date fields like po approval date, req id date and shopping cart approval date. Also i am not sure how these dates are coming in bw like mapping wise. Do they have to be mapped to infoobjects like themselves or could be mapped to standard time charachterstics.
Any help is appreciated. I really need to get this thing working soon
THanks
Mark

Hi Mark
I don't know the DS name in R/3 bcoz i have pulled the data from ARIBA system...you can chk with R/3 guys, they will be able to help you in finding tables and then you can find DS or create it on the tables...
For the calculation of PO cycle time..you have two option
1. In the report create a formula variable and put the two KF like
req-date - po-approve_date it will give you the difference of these two dates in no. of days
2. Create a infoObject of type date...and populate it with these two dates...write a routine in update rule...pass these two dates and use any function module
FIMA_DAYS_BETWEEN_TWO_DATES
DAYS_BETWEEN_TWO_DATES
It will give you the difference in year month and day...
Choose whatever option suits you
Thanks
Tripple k

Product Build Cycle Time

Hi everyone,
I have been asked to investigate our Business Content data for production cycle time information. They would like me to develop a report that gives them all of the time intervals that make up the product build cycle - things they want included are "Rework", "Test", "Wait time for material", "Engineering development", "in stores time" and any other time that would be counted toward our product build cycle time. Could someone please point me to the Business Content and/or reports that report off of it that might have some/all of this information? Your help is greatly appreciated!
Dave

It looks like 0PP_C03 & 4 might be my best bet for getting this information. If someone knows better let me know. I appreciate this forum and all the info it provides!
Thank you all.
Dave

Overriding the default "date-based" restrictions in time reporting

Hi all.
When using CATS/ESS for reporting time on tasks / roles there are some built in date based rules which limits when time reporting is possible.
The cProjects 4.5 (SP05) help describes this as follows for a task-based set-up
The system creates a worklist in CATS to enable you to record your time for a role or task. The system selects all objects (tasks, project roles, or project definitions) to which you are assigned in the confirmation time frame:
If you set up confirmation via tasks, the worklist displays all tasks for confirmation to which your user is assigned by means of a role for the confirmation time frame and which have been released. For the confirmation time frame, the system first checks
the time frame you specified on the Staffing tab page. Then it checks the time frame you specified in the Tasks Assigned to Selected Project Role group box on the Tasks tab page. If you only made entries on one of the tab pages, these apply.
Put differently there is as I understand it a two-step check against the date that the user is trying to report on
a) check against dates in staffing tab of role
b) check against dates in the "tasks assigned to selected project role" tab of the role
The requirement we are looking at now is to make this check a bit more loose. An example could be to say that time reporting is OK as long as the dates lie within the projects scheduled dates.
Any comments / experiences around this? Possible? I assume one would need to try to influence how the worklist is built up.
Best regards / Anders

Hi Anders,
The building up the CATS worklist is done in two side, ERP system and cProject system. Regarding your requirment I think, the logic is done in cProject side, where the logic is hard coded and no Badi to enhance it.
Please see my report in the Wiki to have more details:
https://www.sdn.sap.com/irj/sdn/wiki?path=/pages/viewpage.action&pageid=61926
Kind regards,
Zhenbo

ScheduleTracking_AddIn: Error installing Outlook 2010 add-in for time reporting in calendar

Hi,
I am not sure that this is the correct forum for my question... it’s not obvious where to post.
I was looking for solutions for keeping track of calendar entries in Outlook 2010 and came across a
sample add-in contributed here:
http://msdn.microsoft.com/en-us/library/hh144973(v=office.14).aspx
The add-in has to be built using Visual Studio 2010 – which I do not have – and I was not able to load the project in Visual Studio 2010 Express.
The author of the code posted an update here
http://blogs.msdn.com/b/officedevdocs/archive/2011/07/20/starting-the-time-reporting-outlook-add-in.aspx where he provided an installation package for the add-in for users who do not have Visual Studio 2010.
The installation instructions warn to expect a dialog box displaying “Publisher cannot be verified. Are you sure you want to install this customization” and that installation can be made to proceed. I am getting the following message, instead:
Customized functionality in this application will not work because the certificate used to sign the deployment manifest for ScheduleTracking_AddIn or its location is not trusted.
Contact your administrator for further assistance.
Is there a system setting under Windows 7 to work around this? I can’t continue with installation.
Thanks,
Ross

Hi Steve,
Your suggestions were very useful! Now that I understand the problem I was able to find the right information.
The following link proved most useful:
http://blogs.msdn.com/b/vsod/archive/2012/10/08/troubleshooting-common-vsto-issues-part-2.aspx
The solution proposed in Common Error 3 solved my problem.
I have one point for others who come across this same security issue. The full error message that I obtained was:
Name: ScheduleTracking_AddIn
From: file:///C:/Temp/Time_Reporting/ScheduleTracking_AddIn.vsto
************** Exception Text **************
System.Security.SecurityException: Customized functionality in this application will not work because the certificate used to sign the deployment manifest for ScheduleTracking_AddIn or its location is not trusted. Contact your administrator for further assistance.
   at Microsoft.VisualStudio.Tools.Applications.Deployment.ClickOnceAddInTrustEvaluator.VerifyTrustPromptKeyInternal(ClickOnceTrustPromptKeyValue promptKeyValue, DeploymentSignatureInformation signatureInformation, String productName)
   at Microsoft.VisualStudio.Tools.Applications.Deployment.ClickOnceAddInTrustEvaluator.VerifyTrustUsingPromptKey(Uri manifest, DeploymentSignatureInformation signatureInformation, String productName)
   at Microsoft.VisualStudio.Tools.Applications.Deployment.ClickOnceAddInDeploymentManager.VerifySecurity(ActivationContext context, Uri manifest, AddInInstallationStatus installState)
   at Microsoft.VisualStudio.Tools.Applications.Deployment.ClickOnceAddInDeploymentManager.InstallAddIn()
The Zone of the assembly that failed was:
MyComputer
The last line is misleading as it suggests that Inclusion List Security setting needs to be configured for the
MyComputer zone, since installation was from a local drive. However, doing so did not resolve the issue. I had to enable the
Internet zone to install the add-in.

CHARM Normal Change Project Cycle empty

Hi Gurus,
We are facing an issue in Normal Change in CHARM. The Project cycle and current phase is empty (not auto populated) when we select Normal Change in Scope assignment block. It is working fine for Urgent changes. We have only one project active for both urgent and normal changes. Normal change works fine in CHARM development system. Can anyone please help me getting this fixed ?
Current "phase is Development with Release". We are using Normal Change for the first time in production.

Hi,
Please see the screenshots of task list and project cycle (in web ui). We never closed our project cycle till now. We use Urgent changes regularly but our plan is to roll out normal changes now. Also, I noticed we have different number range mapped for normal change in production but not in development. Does that causes this issue ?

How small Standard Cycle time can be defined in OEE standard?

Hello,
There's OEE standard definition in MII and it allows to define standard cycle time.
I'd like to know how small Standard Cycle time can be defined in OEE standard?
In my customer case, their product is very small and SFC size will be over than 10,000.
(Please imagine screw.)
This screw's required process time at resource A is 0.72 seconds.
Then, they defined the standard cycle time as 0.0002 hour.
0.72 / 3600 = 0.0002
Does OEE report allows such small standard cycle time?
If not, how we can define OEE standard and use OEE report functionality?
Best Regards,
Takahiro Uesugi

Hi Nick,
Main question here is: does business want to keep those members as separate members or it wants to merge them.
If they want to keep them as separate then you have to come up with a better conversion procedure.
If they want to merge them then you have to find out how to find another member to merge with.
You should also implement same procedure when you are going to load Transaction data.
Gersh

Projected Stock-Inventory Report for APO

Hi All,
I have to develop Projected Stock-Inventory Report for APO.
I need to fetch data from APO and need to store it in BI for reporting purpose.
Do you have any idea about how to get the required data from APO system?
Where does stock data resides along with projected stock in any SNP aggregate or any table?
Regards,
Krunalkumar Rathod

Hello,
I suppose you mean you want to export the data "stock on hand" in SNP planning book to BW.
This key figure is an auxiliary key figure that calculated by macro. The data is only diplayed in the planning book but not saved to any database table or liveCache.
In order to save it, you can add your own time-series key figure to save the stock on hand. And you'll need to create your own macro to calculate or copy from the auxiliary key figure.
A good way is you can create a macro by copying the "stock balance" macro and just change the stock on hand key figure to your own time serires key figure. Then when you need the data, you can run the macro in background job. By doing this, the stock data will be saved to the time series key figure. Then you can extract it from liveCache as normal key figures.
Please notice the time-series key figure must be assigned to correct aggregates in an SNP planning area.
Best Regards,
Ada

Project mat. proc. report with monthly breakup and cumulative for year

Hi All,
can any body suggest a report for "Project material procurement report with monthly breakup and cumulative total for a financial year "
Thanks in Advance.
Regards,

Hi Ahmed,
Thank you very much for the response.
I am seeking the std sreport which can give the details for the project material consumption report with monthly breakup with the cumulative month total to year.
ex. jan 10 units , june -10 units , nov 10 units, total (year) =30
regards,

UCCX 10.5 Real Time Report shows "Not Connected"

Hi,
UCCX 10.5 HA over LAN.
As per the title, RTR shows Not connected for both nodes and no data shown for all reports. all services are In service in both nodes.
Any Ideas?
Regards.

Hi Mohamed,
Are you accessing this via the IE or FF? If so which version?
The Real time reporting on UCCX connects to the RMI port 6999 to pull the information on the Engine. If there are no port blockages or if there are no issues with the browsers, then it is a problem with the configuration files in root holding this information which needs in depth analysis.
A restart of the Engine also should help. I know that everything is IN SERVICE, but I have noticed a lot of issues on UCCX 10.5 when there are stuck calls on the system, it impacts RTR with the midnight stats reset.
The reset of the Engine is bound to clear all the stuck calls in the system and this may be a side effect of the stuck calls on the system especially if the RTR was working before you noticed the problems.
Regards,
Arundeep

Project Cycle Time report

Similar Messages

Maybe you are looking for