Project system data source settings

Hi All,
I loaded all the data relating to Project Systems. The problem is any reports that are running on dates cube (0PS_C02) not returning any values.
When i checked the SBIW (IMG on R/3) side, there are some application specific settings related to dates, duration....
Do i need to maintain these?
If so do i need to maintain for each value type? and load the data again?
Cheers,
Suresh.

Hi Diego,
Thanks for the reply, Yes, I looked in the Listcube transaction, I can see the cube records in the cube contents.
But i am not report against them. Where as with other project system related cubes i was able to run the reports.
Any help greatly appreciated.
Regards,
Suresh.

Similar Messages

0PS_C02 - Project System dates cube

Hi All,
Data is loaded to 0PS_C02 - Project System dates cube.
But when i run the mile stone trend analysis Business content report, It does not report any values.
The reason being a filter on Origin( 6= Mile stone trend analysis).
When i checked the cube contents, There is no records of origin as 6.
But R/3 functional consultant reporting there are some milestone trend analysis value against some projects.
When i checked the records in RSA3 extractor checker The Origin values are junk(i mean either unassigned/blank).
Do i need to maintain any application specific settings related to datasources in SBIW in order to extract with correct origin values?
Any help greatly appreciated.
Best Regards,
Reddy.

Hi,
Try to activate through program RSAU_UPDR_REACTIVATE_ALL.

Visual Composer 7.0: system (data source) does not appear

Hi...
There is a problem: system (data source) does not appear in Visual Composer 7.0
1. There is a connector MDM. It is made by PCD. It has been tested. The test is ok.
2. However, as the data source in Visual Composer a connector MDM does not appear.
3. This problem affects all types of connectors, but the Web Service Connector. Connector Web Service is always there.
What the .....?
P.S. The role of the creator of the connector is the same user of Visual Composer
Thanks...

Hi...
There is a problem: system (data source) does not appear in Visual Composer 7.0
1. There is a connector MDM. It is made by PCD. It has been tested. The test is ok.
2. However, as the data source in Visual Composer a connector MDM does not appear.
3. This problem affects all types of connectors, but the Web Service Connector. Connector Web Service is always there.
What the .....?
P.S. The role of the creator of the connector is the same user of Visual Composer
Thanks...

Config sync:error: Folder is no longer part of the system data source or the folder not found

This is the message I am getting when i try to configure synchronization through intellisync in all functions. Any ideas?
Folder is no longer part of the system data source or the folder not found
JT

jtwilcox wrote:
Mail account is MAPI
XP
Outlook 2007
thanks for your help so far!
JT
Hi...
Based upon the folder error, my guess is the Desktop Manager is having difficulty determining your default mail client. I am not sure why but it is easy enough to redo a profile in Outlook just to test this. (Control Panel / Mail)
Of course, I would backup my PST file prior to doing this and then create a new profile and import the PST file into the new profile. Once the profile is running and tested ok, I would again go to the Control Panel / Mail and set the default profile to point to the newly created profile. Then run the Desktop Manager and see what happens....
H.
+++++++++++++++++++++++++++++++++++++++++++++++++
If successful in helping you, please give me kudos in my post.
Please mark the post that solved it for you!
Thank you!
Best Regards
hmeister

Folder is no longer part of the system data source....message

I just got a replacement phone due to a hardware issue with my old phone. I was able to transfer all the data from my old device to new device via blackberry desktop manager, however, I have been unable to get the synchronization to work properly. When I try to configure synchronization to use Outlook for Calendar & Address book etc. I get an error message when I click finish. The error message is a Runtime Error: Folder is no longer part o fthe data source, or the folder could not be found
I have tried downloading and reinstalling the software Blackberry Desktop Manager is 4.7.0.37 released March 2009
I have reviewed the solutions provided by blackberry & on this message board, but they do not make sense to me. One listing states to click on 'Intellisync' in desktop manager, which does not exist in the version I have. Another listing is referring to check the .PST on the device to see if data is in it, then create a new MAPI folder. I have not been able to figure out how to do either of these tasks.
I run Outlook 2007 on a Windows Vista PC
Please help....

Here is the KB that addresses the error message you state:
KB15812 Runtime error - folder is no longer part of system data source or data could not be found
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

For 0PS_C02 cube Project System - Dates update rules not activated!!

Hi All,
When we are trying to install update rules from the BI content for PS module for the cube "0PS_C02 Project System - Dates", the
update rules are not activating. under the cube when BI content activation. What is the issue in activating the update rules from BI content. From BI content the available version objects only will be activated i think. Please rectify and resolve the same at the earliest friends.
thanks,
Sakali

Hi,
Try to activate through program RSAU_UPDR_REACTIVATE_ALL.

Getting System Data Sources' Names under Windows

Hi,
How can I get the names of the System Data Sources in Windows from my java code?
Thank you.
Shakeel

You can't. At least not using plain Java. You could use JNI to get that information, I expect. But it's more likely that if you asked your first question (the one which you decided had the answer "Get all the DSNs") you might get more useful help.

Application Server Data Source settings help needed (10.1.2.0.2)

Hi,
Can someone tell me what maximum values can I set in the following properties under Connection Attributes when I define a DataSource on
Application Server. I have almost 25+ web application deployed on my 10.1.2.0.2 server that all uses one data source I have defined. Now the issue is the number of requests
are very high and every now and then I get timeout error when trying to get the database connection. At one particular instance at peak time I may get over 200+ requests that
do some databse connections etc. Following are my current settings. But need to increase some more but wondering what are the maximum values I can have. I have only one server 10.1.2.0.2
Connection Retry Interval (seconds) = 5
Max Connection Attempts = 3
Cached Connection Inactivity Timeout (seconds) = 30
Maximum Open Connections = 60
Minimum Open Connections = 10
Wait For Free Connection Timeout (seconds) = 15
What other properties can I have to make use of datasource effectively.
Thanks

Here is the copy of my datasources.xml.
<?xml version = '1.0' standalone = 'yes'?>
<!DOCTYPE data-sources PUBLIC "Orion data-sources" "http://xmlns.oracle.com/ias/dtds/data-sources-9_04.dtd">
<data-sources>

<data-source class="com.evermind.sql.DriverManagerDataSource" name="OracleDS"
               location="jdbc/OracleCoreDS" xa-location="jdbc/xa/OracleXADS"
               ejb-location="jdbc/OracleDS"
               connection-driver="oracle.jdbc.driver.OracleDriver"
               username="scott" password="tiger"
               url="jdbc:oracle:thin:@//localhost:1521/oracle.regress.rdbms.dev.us.oracle.com"
               inactivity-timeout="30"/>

<data-source location="jdbc/TestDS"
               class="com.microsoft.jdbcx.sqlserver.SQLServerDataSource"
               password="pwd" xa-location="jdbc/TestDS"
               ejb-location="jdbc/TestDS"
               connection-driver="com.microsoft.jdbc.sqlserver.SQLServerDriver"
               username="usr"
               url="jdbc:microsoft:sqlserver://someloc99:1433/DevelopmentAp"
               inactivity-timeout="30" name="jdbc/TestDS"
               connection-retry-interval="5" max-connections="50"
               max-connect-attempts="3">
    <description>jdbc/TestDS</description>
    <property name="DatabaseName" value="DevelopmentAp"/>
    <property name="serverName" value="someloc99"/>
</data-source>
</data-sources>I also tried changing max-connections="0" it did helped but still after sometime I get timeout while connecting to the database. Don't know if it's with SQL Server that is not letting that many concurrent connections/sessions or something on the Application Server side.
Thanks
Message was edited by:
WhiteSox
Message was edited by:
WhiteSox

Remote Data Source Settings for Lotus Notes CWS

I have installed the Crawler Web Service for Lotus Notes on a box seperate from Machine hosting Portal Server. After that I did all the migrations successfully at the portal side as mentioned in installation guide. But while configuring Remote data Source ,in Authentication Page , i am not getting an edit box to specify the User ID file.Its just have edit box to specify password.
Its taking the last user id that was used in the Notes Client on that machine, or more specifically the KeyFilename setting in the Notes.ini file
How can i set the User ID File(to be considered).
Moreover there is an error
An error occurred while validating the remote XUI service. Verify the Web Service settings, including the SOAP Encoding Style.
Can anybody provide pointers on configuring the Remote Data Source for Lotus Notes database
Thanks in Advance

Hi,
I would check this with the Lotus Notes guys. If the mail is OK in SOST, then SAP is delivering the mail correctly. There is something wrong with the Lotus Notes client itself. I have seen this same problem and I have alos witnessed the HTML email to crash the whole Lotus client. (This lead to a situation that it was just easier to send the plain text emails.)
Regards,
Karri

Aggregating SD and Project Systems data

Hi,
We are using Project systems and SD in R3 and I have 0PS_C04 activated for standard PS reporting. I now need to combine the PS orders and also the SD orders and report on the orders, costs and all create a common report.
Also, this report needs to have the customer information too.
Any help on this would be really appreciated.
Thanks,
Vin

Manga,
The datasources are:
1. 0CO_OM_NWA_1
2. 0CO_OM_NWA_2
3. 0CO_OM_WBS_1
4. 0CO_OM_WBS_3
I have managed to get the customer data loaded based on the project name in the WBS.
Now the only challenge is to get the sales order loaded onto the same cube with the shipping and billing information to reflect the revenue and costs.
Thanks,
Vinay

SP3 Causing SSRS On SP To Loose Data Source Settings

Hi,
(Hope I've got the right forum).
We are running SQL Server 2008 R2 and using Reporting Services on SharePoint 2010 in "integrated mode". The data source file and the report files that use that data source live in an SP library, and we have all those extra functions that allow
you to do, among other things, manage the data source used by each report file. Everything has been working fine up to now.
We have recently deployed the SP3 for SQL, but since then, every morning the data source has lost the credentials we use to connect to the database and is set to disabled, and all of the reports that map to this data source file have lost their data source
setting.
If I edit the data source, put the correct credentials in and enable the datasource, then go back into every report and map them back to the data source file, everything works, until the following morning when the problem reappears.
To say this was frustrating would be a severe understatement.
I'm guessing that overnight we have a server reboot, IIS Reset or something going on.
The problem is that SP3 is actually solving a number of unrelated problems for a different team, so rolling back is not really an option.
So I'm hoping someone out there has seen this before and knows a work around.
Thanks,
Swanny.

Hi Swanny Too,
Thank you for your question.
I am trying to involve someone more familiar with this topic for a further look at this issue. Sometime delay might be expected from the job transferring. Your patience is greatly appreciated.
Thank you for your understanding and support.
Thanks,
Wendy Fu
If you have any feedback on our support, please click
here.

Inventory data sources - settings

Hi Experts,
Please provide me the solution for the following
1. For 2lis_03_bx, i want to do the setting to opening balances upto 2007.31.12, where we will do this settings.
2. Can we possible to load 2lis_03_bx and 2lis_03_bf into DSO. IF possible please suggest me the std SAP delivered DSO/ODS.
Thanks in Advance.
Regards
Kuttan

Hi Kuttan
You want to load Opening balance as at 2007. Does the data in your source system i.e R3 have the Opening balance as at 2007 or is the Opening balance in R3 Live Opening balance. (I am sure it is Live opening balance).
The appropriate thing for you will be to load the data in 'as-is' condition i.e. Load the current Opening Balance. Remember that during this process you will have to 'lock' the R3 system. After loading the 'Live' opening balance i.e. 2LIS_03_BX , you will load the transactions that lead upto this Opening balance. These will be loaded through 2LIS_03_BF. For this process follow the link that is posted in the earlier link.
Cheers
Umesh

Project System(PS) - Milestone Settings.

Hi Friends,
Pls. Send me the Usage of Milestone in Project progress and Milestone trend analysis.
What are all the config. has to do?
Looking for your speedy response.
Regards
Prabu K

Milestone billing is typically used for billing projects, such as plant engineering and
construction projects. Such projects often include a series of milestones that mark the
completion of different stages of the work. In the SAP R/3 System, milestones are defined
in a network along with planned and actual dates for the completion of work. The milestones are also assigned to the billing dates in the billing plan.
IMG configuration requires :-
1. Maintain billing plan types for milestone billing in OVBO.
2. Define date description in SM30 - V_TVTB.
3. Maintain Date Category for Billing Plan Type IN OVBJ.
4. Allocate date category in SM30 - V_TFPLA_TY.
5. Maintain date proposal for Billing Plan Type in OVBM.
6. Assign Billing Plan Type to Sales Documents Type in OVBP.
7. Assign Billing Plan Type to Item Categories in OVBR.
8. Define rules for determining the date in OVBS.
reward if useful
thanks
madhan

R/3 tables and data sources

hi guys,
i am trying to find r/3 tables for plant maintainance data sources
and project system data sources
i am trying it out in help.sap.com
i am able to find r/3 tables information for 60% of data sources only
how can i find the exact information of r/3 tables with respect to data sources
i have seen help link for this application components throughly
please suggest me
i will assign points

Hi Selva,
I typically try this:
Goto ROOSOURCE -> Give the datasource name and find out what type of datasource it is. If it is based on view/table then use the table/view. If it is based on function module then you would need to look at the code and find out from which tables the data is extracted.
For fn module:Goto se37 -> Give the fn module name -> Click the "find" button -> give the text as "select". Select the radio button "Main program". It would list all the select statements in the fn module. In teh select statement you can find the name of the table.
Hope this helps.
Bye
Dinesh

Error while Replicating the Data Source in Quality System....

Dear Expert,
I have created a generic data source in R/3 Dev system and I replicated the data source to BW DEV system. Everything is fine in DEV system.
I have transported the Data Source to R/3 Quality System. And transported the related objects in BW DEV system to BW QUALITY system.
Now I am getting the error as follows :
BW QUA System --> RSA1 --> Source System --> Data source Overview --> Sales & Distribution --> _REPLICATE_
*DATASOURCE*.( clicked )
Its moving to another screen (R/3 QUALITY) , but it is coming as a LOGIN screen. Its askong for the USER name and Password. And when I click on BACK button , its givin following pop-up
RFC connection to source system LOGSYS is damaged ==> no Metadata upload
What could be the issue ?? Please suggest.
Thanks,
Sanjana

Hi saveen,
Yes I transported in that manner.
I checked in Source System ( RSA13):
Its giveng the pop-up ,
RFC connection check failed. Check connection
Please suggest, how can I proceed ?
Thanks,
Sanjana

Project system data source settings

Similar Messages

Maybe you are looking for