0PS_C02 - Project System dates cube

Hi All,
Data is loaded to 0PS_C02 - Project System dates cube.
But when i run the mile stone trend analysis Business content report, It does not report any values.
The reason being a filter on Origin( 6= Mile stone trend analysis).
When i checked the cube contents, There is no records of origin as 6.
But R/3 functional consultant reporting there are some milestone trend analysis value against some projects.
When i checked the records in RSA3 extractor checker The Origin values are junk(i mean either unassigned/blank).
Do i need to maintain any application specific settings related to datasources in SBIW in order to extract with correct origin values?
Any help greatly appreciated.
Best Regards,
Reddy.

Hi,
Try to activate through program RSAU_UPDR_REACTIVATE_ALL.

Similar Messages

For 0PS_C02 cube Project System - Dates update rules not activated!!

Hi All,
When we are trying to install update rules from the BI content for PS module for the cube "0PS_C02 Project System - Dates", the
update rules are not activating. under the cube when BI content activation. What is the issue in activating the update rules from BI content. From BI content the available version objects only will be activated i think. Please rectify and resolve the same at the earliest friends.
thanks,
Sakali

Hi,
Try to activate through program RSAU_UPDR_REACTIVATE_ALL.

Project system data source settings

Hi All,
I loaded all the data relating to Project Systems. The problem is any reports that are running on dates cube (0PS_C02) not returning any values.
When i checked the SBIW (IMG on R/3) side, there are some application specific settings related to dates, duration....
Do i need to maintain these?
If so do i need to maintain for each value type? and load the data again?
Cheers,
Suresh.

Hi Diego,
Thanks for the reply, Yes, I looked in the Listcube transaction, I can see the cube records in the cube contents.
But i am not report against them. Where as with other project system related cubes i was able to run the reports.
Any help greatly appreciated.
Regards,
Suresh.

Aggregating SD and Project Systems data

Hi,
We are using Project systems and SD in R3 and I have 0PS_C04 activated for standard PS reporting. I now need to combine the PS orders and also the SD orders and report on the orders, costs and all create a common report.
Also, this report needs to have the customer information too.
Any help on this would be really appreciated.
Thanks,
Vin

Manga,
The datasources are:
1. 0CO_OM_NWA_1
2. 0CO_OM_NWA_2
3. 0CO_OM_WBS_1
4. 0CO_OM_WBS_3
I have managed to get the customer data loaded based on the project name in the WBS.
Now the only challenge is to get the sales order loaded onto the same cube with the shipping and billing information to reflect the revenue and costs.
Thanks,
Vinay

Project System Infocubes

Hello all,
I've noticed that BI Model for Project System is "duplicated", I mean, for each cube, two version exist. For example:
0PS_C02 - Project System - Dates
and
0PS_C021 - Project System - Dates (New)
I read some best practices and documentation and I found that the difference is that the cubes identified with (New) are based on "Identification using GUID" and the others are based on "Identification Using External ID".
Could anyone tell me the difference? I don't know which one I have to activate.
Thank you, points will be assigned.

Hello Andy,
See Page 7 in this doc [Business Information Warehouse Release Notes|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c04e90b2-f31c-2a10-0595-8409b37914f3]
If you are using SAP R/3 Plug-In 2005.1 then you can use the new datasource and the new InfoCube 0PS_C021 else the old one 0PS_C02.
Thanks
Chandran

Project system extractors

Hi All,
We need to generate a report for project system data where the Cost for a project is determined and revenue is calculated based on the WBS Element.For this we need to detemine the appropriate extractor which contains the total cost,planned cost,total revenue and planned revenue for a project in project systems.Could someone help me in finding the extractors..........
Regards,
Shravani

Hi Shravani
Check this link
http://help.sap.com/saphelp_47x200/helpdata/en/04/926eae46f311d189470000e829fbbd/frameset.htm
and also check these datasources,which might be useful
0CO_OM_WBS_1 (WBS elements: Costs)
0CO_OM_WBS_5 (WBS Elem.: Selections)
0CO_OM_WBS_6
Regards
Jagadish

Diff between 0PS_C02 and 0PS_C021(project system cubes)

Hello experts,
Please let me know the difference between above cubes for project systems in terms one says 'Dates(Identification Using External ID)' and the second one says 'Dates(Identification using GUID)'
Regards
Shanthi

0PS_C02 - Dates(Identification Using External ID)
0PS_C021 - Dates(Identification using GUID)
Difference is - In New Content 0PS_C021 BW Can uniquely identify a PS Object using GUID which cannot be changed as External ID which was changeable.
"As of BI Content 3.5.3 Add-On SP2, the Business Content for the Project System (PS) has been redesigned so that an SAP Business Information Warehouse (SAP BW) system can uniquely identify a PS object (for example, a project definition or a WBS element) using the object's GUID instead of its external ID. The advantage of using the GUID is that it cannot be changed in an SAP system, whereas the external ID can be changed. Previously, if a user changed the external ID of an existing PS object in an SAP system and then uploaded the object to SAP BW, the SAP BW system would create new records for this object instead of updating the existing records. Using the GUID therefore improves the consistency and correctness of reporting in SAP BW for the Project System. "
<a href="http://help.sap.com/saphelp_sm32/helpdata/en/3e/f30842a9f92a38e10000000a1550b0/RN_353_FP_e.pdf">Source</a>
Message was edited by:
Jr Roberto

Changing the data in DataSource in R/3 System for Project System

Can we change the data of DataSource which is extracted from R/3 sYSTEM for Project System Module?

Hello Rajesh,
You can modify it in PSA. Or write the routines or rules logic as per your requirement.
Could you please elaborate more on what kind of changes you are interested for.
San.

In which tables this Project system 'CJ20N' Data has been stored.

Dear Guru's
Please help to fullfil my requirment.
In Project System we are creating 4 levels WBS structure in CJ20N; we are assigning deferent machine types and deferent Personal nou2019s to deferent WBS elements.
Here I want a report against this project what all the Machines & Employee No that we have assigned, and against Employee Network we are booking the time sheet for Employee and we are transferring the same to Controlling, we are Preparing the Sales Order by using the WBS element and than we do u201CDP91u201D to create Debit Memo request with reference to sales order for that employee for his working approved working Hrs.
From which tables we will get this required information to prepare u201CZ-Reportu201D
Are there is any link to get the document flow from Project to Debit memo request.
Regards,
Kalyan

U have to refer multiple tables for this.
Fot CATS time entry u can get the date from table CATSDB.
Refer below link.....
SAP Project System - A ready Reference ( Part 2 )

Version 999 Project System Plan Data Issue

I am using transaction CJ9B to copy the Project System related plan data i.e. plan data at the WBS element level from Version 10F, period 1 to 12 in year 2010 to version 999, period 1 to 12 in year 2010. The transaction CJ9B runs successfully in the update mode. But when report CJI4 is executed for version 999, period 1 to 12 in year 2010 then we do not find plan data in sync with version 10F.
I analysed this issue, had a meeting with end user and blanked out target version 999 using source version 9ZR for the year 2010. Then I again copied version 999 from version 10F. Still plan data in version 999 do not exist as they are in version 10F. I have checked the version 999 master data in transaction OKEV. Integrated Planning for SPL, COPA, cost center accounting and business process is active. COPY Allowed is also enabled. Version 999 is unlocked as well.
Hence I am not sure why the copy functionality is not working fine for version 999, period 1 to 12 in year 2010.
Can you please take a look and revert with your opinion so that this issue can be fixed ?
Thanks,
Umesh

Hi,
If you want to copy all the plan date from 10F to 999, then in Txn CJ9B
select the indicator reset and overwrite in target version and execute in test mode.
Regards,

BTE's used for project systems master data.

Hi ,
Can anyone tell me what are the BTE's used for project systems master data.
Tcode used are CJ01, Cj02, CJ20N, CJ12, CNMASS
When master data is changed or created BTE should trigger.
Regards
Subin

I don't think there are any open_fi BTE available for PS master data.
you can use classic subs/vals using GGB0 and GGB1 transaction codes.

Transaction Data for Project Definition & WBS Element of Project System(PS)

Hi all,
   We want to install the Project Systems and the requirement is to report on the following fields:
Project Definition (Project Definition   PROJ     PSPID)
Project Definition (PS Short Description PROJ     POST1)
Project Definition (System Status CNJ_STAT     STTXT_INT)
WBS Element         (Project Type       PRPS     PRART)
WBS Element         (Short ID             PRPS     POSKI)
WBS Element         (Person Responsible     PRPS     VERNR)
WBS Element         (Company Code     PRPS     PBUKR)
R/3 Table Names and Field names are in brackets.
0PROJECT_ATTR & 0PROJECT_TEXT are DataSources of 0PROJECT Master Data.
0WBS_ELEMT_ATTR & 0WBS_ELEMT_TEXT are DataSources of 0WBS_ELEMT Master Data.
How can I find the transaction data for those above fields, PLEASE ?
Thanks in advance.

Hi
Kindly check the following data sources:
0PS_CLM_CST ( Costs of a Claim)
0PS_CSH_NTW ( Network plan payments)
0PS_CSH_NWA ( Payments on network plan process)
0PS_CSH_WBS ( Payments on WBS element)
0PS_DAT_NTW ( Network dates )
0PS_DAT_NWA ( Dates network operation)
0PS_DAT_PRJ ( Date project )
0PS_DAT_WBS ( WBS Element Dates)
0PS_NAE_EVA ( Progress in Network Activity Elements)
0PS_NTW_EVA ( Progress in Networks)
0PS_NWA_EVA ( Network Activity Earned Value)
0PS_ORD_EVA ( Order Earned Value)
0PS_WBS_EVA ( Earned Value WBS Element)
hope this helps!
best regards,
Thangesh

Change Table Fields in "Costing" in with Project System (PPM 5.0)

Dear Gurus;
I need to know, how can I change fields in "Costing" with Project System (Project Management in tab name "Accounting").
The integration works well, but I need to view the values of: Actual, Plan and Commitment.
In the Standard way, just only can see the Plan (with the colum "Costs").
Please, help.
Best regards.
Mariano.
Edited by: Mariano Sabiche on Apr 27, 2011 3:17 PM

Hi Mariano
The particular screen you are referring to will only show the planning on Easy Cost Planning due to the labour costs and revenues planned on the cProject. You can use the services&deatil on the assignment - click on the WBS assigned to get the detailed list of services for the assigned WBS element. You can then click on Detail Data to get detailed data on the assigned WBS element. If you want a report with all the data, best use the BW cubes for that to combine cP and PS data.
Hope this helps
Regards
Duan

Project Systems Business Content - Residual Order Plan

Hi all,
I a issue which I hope someone can help me with:
I am lodading data into cube 0PS_C08 and then into 0PS_C04 as per the BC. When I view the BC restricted key figure "residual order plan" i get nothing (blank).
I look in R/3 I have values for residual order plan. I have looked at the Help on SAP and they say there is some config that needs to be done in SPRO. I dont really understand what config needs to be done can someone help?
Many thanks,
Leo

Hi,
We are searching for project versions(project systems) business content :
Base tables :
VSAFVC_CN     Version: Operation in order
VSAFVV_CN     Version: Quantities/Dates/Values in order operation
VSAUFK_CN     Version: Order master data
VSEBAN_CN     Version: Purchase requisition
VSEBKN_CN     Version: Purchase requisition account assignment
VSJEST_CN     Version: Individual status per object
VSJSTO_CN     Version: Information on status object
VSKBED_CN     Version: Capacity requirement records
VSKBEZ_CN     Version: Additional data for table KBED (ind. capacities)
VSKBKO_CN     Version: Capacity requirements header for an order
VSKOPF     Version: Header - general data for a version -
VSKPER_CN     Version: Workforce Planning
VSMLST_CN     Version: Milestone
VSNPTX_CN     Version: PS texts (network)
VSPRHI_CN     Version: WBS, edges (hierarchy pointer)
VSPROJ_CN     Version: Project definition
VSPRPS_CN     Version: WBS element (work breakdown struc. ele.) mast. data
VSPRTE_CN     Version: Scheduling data for project item
VSPRTX_CN     Version: PS texts (WBS)
VSPSTX_CN     Version: PS texts (header)
VSRPSCO_CN     Version: Cumulation table for project reporting
VSSTEU     Version: Control table - one entry per version object -
I didn't find any relevent business content for above tables.
If anybody extracted these ,please let me know where and how they extracted.I will assign points.
Thank you,
GSR

Project System Restructuring -- Reporting Requirement

Hi All,
Due to Restructuring in our client.Our Project System is adopting the following method and asking for BI input on this please let me know if anyone has come across this situation.
Projects are going to move from one Company Code to another Company Code. So they are closing the existing projects in Old Comp. Code and new projects are being created in New Comp. Code . In doing so they are closing the Old Projects(say P1 u2013 total budget 100) consumed 60 and then new project they will create with remaining balance 40. (say P2). Also
Reporting Requirement :
Then when they run the report for the New Project P2 then it should bring the information of P1 also.
Please let me if it is possible to achieve this.
Regards,
Mayank

interesting, load previous data in a cube completely for all the previous years and have the new data load in another cube and create a multiprovider to join them. and in your selection for wbs use both data selection...thats all i can think of on top of my head..

0PS_C02 - Project System dates cube

Similar Messages

Maybe you are looking for