Projects appear blank?

I've been having an issue with Aperture 3.1.2 where an individual project or two appear blank. This often happens when I'm organizing photos.
For instance, I just moved about 150 out of 300 photos from the original project to a new project. When I clicked back into the original project, it appeared with no photos. I check the search field, toggled the view modes, tried a test search & cleared.. nothing seems to fix this issue.
The only remedy is to quit and restart Aperture. Any ideas how to correct?

I might try going through the Troubleshooting Basics to start:
http://support.apple.com/kb/HT3805

Similar Messages

  • After load test is completed, "90% Page Time", "95% Page Time" columns appear blank and "99% Page Time" column is not available.

    Hi,
    I am using visual studio 2013. After running a load test on my application, I need to view the "90% Page Time", "95% Page Time" and "99% Page Time" percentile data in tabular results view. But since I have started
    using visual studio 2013, these columns appear blank after load test execution is completed. Is there a specific configuration change is required to view data from these columns ?
    Please refer attached screen shot -
    Help much appreciated.
    Thanks,
    Rahul S.

    Hi Rahul S,
    To collect the data, in the Load Test Editor, under the Run Settings node, select the run setting node to change. In the
    Properties window, for the Timing Details Storage property, select
    All Individual Details.
    Best Regards,
    Jack
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Why are my existing content pages appearing blank in RH7?

    I am working in RoboHelp 7.  Some of my existing pages appear blank in the tool, but when I do a Preview or generate the final output, the content appears in the viewer window.  It also appears to the end-user just fine.  I have tried importing the file again and also re-typing the information, to no avail.
    Kate

    Hi,
    Yes, they do.  It doesn’t happen to all of my pages, just some.  I normally don’t notice which pages are having problems, until I access the page in order to make an edit.  and then the page is blank!  it’s frustrating.
    I hate to change the layout of one page – to remove the drop-down, because all of my pages have drop-downs.  and in order to make the pages look consistent across the board, I’d need to update 3,000+ topics (and I’m the only writer in my division).
    I know – the next thing you’ll say is that my project is too big.  ☺  that’s one thing I’m working on…eventually I want to use DITA.
    Kate

  • Audio Units appear blank (white)

    Can anybody help me out with some Audio Unit problems. I have installed the vst to au converter and have the mda vst package of plugins. On my MacBook everything works okay. However, on my Intel MacPro (10.5.4 w/ GB '08 4.0.0) the plugins show up under effects and instruments, but are blank or white when I click the manual pencil tab. Sometimes I can change the settings b/c I can hear the changes, but cannot see the numbers or knobs. Another issue is that plugins like the C3 multiband, TAL-bassline, and UpStereo appear blank/white, but the presets work. I'm getting effects but can't manually change them. Sometimes a knob or meter might appear, but mostly just whiteness. Is this a cpu issue or what?
    Appreciate the help...
    Message was edited by: Lamont Coal

    Does the grid of characters look like this?
    If not, then try switching your project settings from Mercury Playback OpenCL to Software Only.
    Cheers,
    Jeff
    EDIT: Removed reference to CUDA.
    Message was edited by: Jeff Bellune

  • Previously burnt CD appears blank

    I have a couple of CD's i've backed up some projects on but the CD's appear blank - if i use a terminal window and check the disk there are files in there (ie .DS_Store and some folders) but everything is empty - i'm assuming i'm SOL on retrieving the info off the disk, I had in the past retrieved the info no problem. I'm wondering if it could be the alignment of the burner was off (i had to replace the drive since i burnt those disks)

    hello, i've been trying to do the same as you and haven't found answer to the mistery, when trying to install Windows XP on my Boot Camp the burned CD appears like a blank CD.
    Been having A LOT of trouble with this superdrive since i did the 2.1 update and read that many people with this superdrive had the same faillures and errors.
    My superdrive is: MATSHITA DVD-R UJ-857 Revision HAEA
    if some one could give us a hand will be great. Thank you

  • Clicking on a picture or link that will automatically open up a 2nd window to view, but the window will open up but it appears blank

    When clicking on a picture or link that will automatically open up a 2nd window to view, the window will open up but it will just appear blank and says Type a Web address in the top bar.

    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]
    * [[Troubleshooting plugins]]

  • "The project appears to be damaged, it cannot be opened"

    I have created a project in Premiere Pro Creative Cloud CS6 but when I try and open it in a single-app subscription version and also the copy we have as part of the creative suite I get the following error -
    "The project appears to be damaged, it cannot be opened"
    Is this due to the difference in versions or is the file actually damaged?
    It still opens fine on the machine running the creative cloud licence with no errors so I dont believe the file is actually damaged but we can't access it from the other machines.
    Any help would be much apporeciated.
    Thanks

    Welcome to forums .
    The error massaage indicates that project file is either damage or corrupt .
    If the project file is fine then same project file can work both on single App subscription and Volume license subscription .
    Just make sure you are opening project created in Premier pro CS6 not of project created in premier pro CC.
    Project created in Premier pro CC will not open ion premier pro CS6 whereas vice versa is possible.
    Regards
    Karandeep singh

  • I have a fillable form that we send to contractors - when the form is opened on a computer the contractor can view the fields we have completed, however when viewing from a mobile device or cell phone those fields appear blank. Any suggestions? I am at a

    when the form is opened on a computer the contractor can view the fields we have completed, however when viewing from a mobile device or cell phone those fields appear blank. Any suggestions? I am at a total loss as it works when viewing from the computer. I am assuming it is a setting or maybe we need to save it a special way?

    What version of Reader are they using, exactly? And are you sure they're
    using Reader itself and not opening the file inside a browser window, for
    example?
    On Fri, Feb 6, 2015 at 5:24 PM, jessicao96457206 <[email protected]>

  • File created in InDesign CS5.5 appears blank in InDesign CC.

    When I open a file originally created in CS5.5, the pages appear blank. Moving my mouse over the page boxes highlight, showing that the original elements are still there but not showing. Links and text are there but do not show unless zoomed out to 25%, but disappear again once zoomed back to full screen. What's the fix for this?

    Try exporting to IDML, preferably from the original version. See Remove minor corruption by exporting

  • Completed form appears blank

    I've received an interactive form (created in Acrobat 9 Pro) back completed, but all the fields appear blank until I click on one & then if I clck on another the previous one appears blank again i.e. only one at a time can be seen
    Has anyone come across this before & if so, what's the issue & the solution, please?
    Thanks
    BTW it may not be relevant but the data in the fields doesn't appear if the form's printed either.

    Most likely the form was opened and save with the Preview application on the Mac, which has lousy support for PDF forms. It actually corrupts them in a number of ways when it saves them. Since you have Acrobat, you can export the form data to an FDF file and import it into a blank form and all will no OK.

  • When I open numbers, my spreadsheet appears blank.  yet, when I moveacrossa row, data appears in the formula bar.  How can I fix it so I can see the sheet?

    When I open numbers, my spreadsheet appears blank.  yet, when I moveacrossa row, data appears in the formula bar.  How can I fix it so I can see the sheet?

    I had the same issue for several days (and several reboots).  During that time I found I could print the spread sheet as a pdf, though I couldn't see it except cell by cell.
    Suddenly the problem disappeared.  I never did know why the problem appeared nor why it disappeared.
    In the interim I ran the disk utility several times and repaired permissions twice.  That may have helped, but I don't know.

  • Form field answers appear blank until I click on them - why?

    I have created a form using InDesign, however when customers submit the form, the fields appear blank. Only when I click on the field the information appears. How do I solve this so I can see all answers without having to click on each individual field?

    How are viewing the PDFs? This doesn't sound like an InDesign issue at all but you should be viewing PDFs with Acrobat or Reader. All bets are off for anything else, especially Mac Preview.

  • Completed forms appearing blank

    I created a fillable form using Adobe Acrobat X Pro, Version 10.0.1. Users download the online form from a web page (often using the Reader app on the iPad) and e-mail it to me. They are advised to e-mail the "flattened" version of the forms, but I am not certain that this always happens.
    Sometimes I open the form using Adobe Acrobat X Pro on my PC, and it appears blank. I have been informed by several users that other e-mail recipients can see the filled data without any problem.
    Today, I received a filled version of the form, and all data was visible. I forwarded the message and attachment to another person, but she received a blank copy.
    Does anyone have ideas as to what the issue might be?

    It's hard to say for sure without being able to inspect the document? It would also help to know exactly what PDF viewer is being used by everyone, particularly the last person you mentioned. Can you post a sample form somewhere that appears blank to you, and one that you can see is filled-in but appears blank to others?
    When you open a form and it appears to be blank, what happens when you click into the text fields? A problem related to how Preview on the Mac corrupts PDF forms will result in the text being shown when a filled-in field has the focus.

  • Effective Date should appear Blank by default on SSHR Separation process

    Navigation : Manager Self Service - Separation - Action Page - Termination Effective Date Options.
    On this page the there is an option button "Change should take effect on the effective date as mentioned below".
    Here by default the effective date appears as SYSDATE.
    The requirement is that the effective date should appear blank by default. We tried using personalization, but its not possible.

    By Separation I'm guessing you're referring to the 'Termination' MSS page where it defaults the Effective Date.
    On this page the controller sets the Effective Date to sysdate - I don't know of any way you can blank this out without extending the delivered controller:
    oracle.apps.pqh.selfservice.common.webui.EffectiveDateCO.class

  • Search on iTunes appearing blank

    Since upgrading to ios7 on my iPhone 4s I am unable to search for music in the iTunes Store. My screen appears blank. Please can you advice how to solve this?

    There is no Power Search any more, if that's what you're referring to. The search box at the upper-right is the only search now.
    Regards.

Maybe you are looking for