Projects super user responsibility

hi
i have a problem:
In e-business suite 12.1.1 , In projects super user responsibility when I want to open JSP forms like :
Team Role Details Workbook and Overcommitted Resource Hours Workbook and Scheduled Resource Hours Workbook This error take place :
Not Found
The requested URL /discoverer/viewer was not found on this server.
Attention : in required steps of set up for PJR mentioned Implement Oracle Discoverer is required , does this error related to implementing Oracle Discoverer or not .

Pl do not post duplicates - The requested URL /discoverer/viewer was not found on this server

Similar Messages

Unable to Navigate Organization in "Maintenance Super User" Responsibility (Eam Self Service Pages)

Dear friends,
Iam learning Oracle EAM module, now i had a problem that i couldn't able to find EM1 Organziation in the LOV, though i have done Organziation access also, based on the Oracle support.
Solution from Oracle Support
======================
Unable to Navigate in 'Maintenance Super User' Responsibility (EAM Self Service pages) (Doc ID 1053400.1)
If you have the Organizations LOV empty, then you need to go to (Navigation) -Inventory (responsibility) > Setup > Organizations > Organizations Access. Here you need to define a new line for each organization you want to access from the EAM SS responsibility.
Kindly respond on this issue.
Thanks
Shruthi

Try to compare the menu that you have created with Functional Administartor menu structure. It may help to debug your problem.
Thanks,
Mitiksha

How to Change Maintenance Work Order Report in EAM Maintenance Super User

Hi,
We like to change or create new costom report in place of Standrd EAM Maintenance work order details report in Maintenance super User Responsibility.
When we go Maintenance Super User > Work Order > Print work order >Layout , In Template layout we find only one LOV called Maintenance report.
We like to where this this Template LOV storing and Run button code where it's storing
THANKS,
Gana

Hi,
You could temporarly adjust the CUNI definition for TST so that it can be converted to seconds. Adjust the notifications to set a valid unit of measure.
The alternative would be to update the field MAUEH in table QMIH with a valid breakdown unit of measure.
-Paul

Oracle financials end user responsibility in implementation project

Could any body tell me the Oracle financials end user responsibility in implementation project

SO what is the variance in the responsibilities for Functional consultant and Key user in implementation or support project.
=========================================================================================
See in implementation project, the resource who is performing the implementation needs access to all the forms i.e. setup, transaction forms etc.
Also within an implementation project, there may be resources who are not associated with set, hence they responsibility will have only transactiion forms or inquiry forms.
=======================================================================================================
In Support project, the following may be valid users associated with the functions:
the Invoice entry folk who keys in the invoice needs access to Invoice form only.
Similarly The invoice inquiry folk who needs to inquire the invoice will need to have access to Invoice Inquiry form only.
Similarly a person who is incharge of the overall control within a support project will have access to all the forms, functions, menu etc.
=================================================================================
Hope this helps.
Thanks and Regards
Manish Jain.

Project Costing Inquiry Responsibility

Hi Guys,
I cannot find the Project Costing Inquiry Responsibility in Oracle Apps 11i. Only the Project Costing Super User is available.
How can I add this inquiry responsibility? I dont know the menu and functions to be used.
Thanks,
Benjo

Hi,
I cannot find the Project Costing Inquiry Responsibility in Oracle Apps 11i. Only the Project Costing Super User is available.Navigate to (Security > Responsibility > Define) and query "Project Costing%".
How can I add this inquiry responsibility? I dont know the menu and functions to be used.See this link.
Query_Only
http://forums.oracle.com/forums/search.jspa?threadID=&q=Query_Only&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

Blank Projects vs. Responsive Projects

I normally develop using the Captivate Blank Project as my customers are not normally concerned about responsiveness yet. However, I may be soon working for a new customer that may. So, I wanted to know a few things. 1. Can I make a Blank Project Responsive?
2. If so, what is the best way of going about this?
3. If so, would I have to make sure that all graphics were vector graphics?
3. If not and only the Responsive Project format publishes responsive projects, again must all graphics used be vector graphics for the project to be responsive?
Thanks!

Thank you for your quick reply. Another question - With a blank project you are able to set the most desired size, but on my initial look at the Responsive Project, it does not appear to allow a user to select a size. Just takes one into 1024 x 627. Am I missing something with the sizing? Is there another place to set a size other than the 1024 X 627, if desired, or are all of the different screens (Primary, Mobile, and phone set at what's considered a standard, but the responsiveness aspect will allow it to do any larger, smaller, or non-standard size (say 1000 x 700)?

Journal Batch Workflow - Super user

Hi,
We have recently implemented Journal Batch (Internal name - GLBATCH) workflow for Journal approval before posting. We would like to setup a super user, who can approve all the Journal Batch Notifications. We thought of providing Workflow Administrator responsibility, but that will give access to all the workflows. We need to give access to view/approve only Journal Batch notification.
Please let me know if there is any way to achieve this.
Thanks,
Prasanna

There are several MOS Docs that discuss this issue - pl see if they are applicable here
268635.1 - Journal Approval : Could not find an approver
563487.1 - Journal Is Sent For Approval/No Approver Found-Supervisor Is In Place
737224.1 - What Are The Profiles That Affect The Way Journal Approval Works?
HTH
Srini

Purchasing Super User not able to quiry Requisition

Hi
Can someone please assist me on these,why wouldn't the Purchasing Super User not be able to quiry some Requisition,....do we need to set them up as buyers?
I get these FRM-40212: Invalid value for field REQ_NUM
thanks
Edited by: user12198087 on Dec 9, 2009 12:20 AM

Hi,
Any employee of an organization can raise a requisition, not necessarily that he should be defined as a buyer... To access requisition form in APPS, you need to be defined as an employee, not as a buyer. Please correct me if I am wrong here.
Did you check if any menu or function has been dropped from the responsibility? Do check what's the main menu attached (like Menu : Purchasing SuperUser GUI) to you PO responsibility. and all appropriate sub-menus of requisitions are attached to it.
e.g. Purchasing SuperUser GUI (Main Menu) ---> Requisitions: (Sub Menu) --> Requisitions Summary: Subfunctions, function : Requisition Summary
Regards,
S.P DASH

SUPER user logging and Monitoring

Since SAP does not recommend using GRC Access Control to log actions performed using SUPER users such as SAP, DDIC, or other powerful id's, what tools are available? When SAP, DDIC, or other powerful super users are used in your SAP environment. Are these activities being logged? Is anyone monitoring these activities? Do you even use SUPER id's in your environment or assign access directly to your BASIS team? Have you used GRC SPM or Virsa Firefighter to manage these users? Are you using monitoring tools such as Cyber-Ark to log and monitor your BASIS team? How do you ensure your management or audit team that all activities perfomed by SAP*, DDIC or other powerful SUPER users is logged and available for review?

> Since SAP does not recommend using GRC Access Control to log actions performed using SUPER users such as SAP*, DDIC, or other powerful id's, what tools are available?
Can you reference the source where SAP says that standard super users should not be logged?
SAP also says that standard users such as DDIC and SAP* are known targets of attack vectors(DoS attacks, password brute forcing, DB vulnerabilities...) so once having locked them down (see the other responses) it would make sense to monitor them for any events.
Cheers,
Julius

Super User "Right-Sizing" Exercise

As many of you know, the Super Users play a tremendously important role during the implementation of SAP.
We have seen further value from the Super Users as they have been involved in new functionality expansion, upgrades, and enhancements. The also serve as our front-line troubleshooters.
I have been asked a theoretical question that I'm hoping some of you may have insight or ideas about. The question is "How do we know that we have the right number of Super Users?". This is being asked now that we have completed our globalization project and will soon complete a global upgrade.
Has anyone made significant changes to their Super User model post-implementation? If so, what did you base the decision on? How did you deliver the change? What worked well, and what didn't work so well?
Any help would be greatly appreciated,
Andrew

Andrew, there is no right or wrong answer here.
Super users should stay in place after an implementation, and should be used for UAT of small changes that are made.
Super Users should be used to teach new starters, how to use SAP, and there should be enough cover to cope with sickness and holidays, i.e. at least 2 in each significant team.
However a super user needs to have a day job, and the pull from the business will come, these people are not IT, they are business people and need to do their day job first, and be a super user second.
You also need to consider what happens when a super user leaves.
One nice thing we had with super users is they also were part of the acceptance board for new changes, managers may request a change, but the super user needs to agree to it, this helps in sign off, testing and UAT.
Super Users are business people who feed into the SAP team and play an important part in the relationship between the two departments.

Super User of the Month

Hi Everyone,
The Nokia Support Discussion’s team is very appreciative of the active participation of our members and recognizes the value being provided on a regular basis.
Last September, we started identifying some of the top contributors in the forum and sent out appreciation messages to our most active members.
Since then, the team has been monitoring the activities of users on a monthly basis to identify the contribution each individual has provided to the forum. Whether you’re a newbie or a veteran, it doesn’t matter. What matters to us is that you’re here helping other users to address their questions concerning a Nokia device or service.
If you’re asking how you can become a super user, all you have to do is engage and provide assistance to other users on a regular basis. The more kudos received and answers accepted as solutions, the faster it is for you to climb up the ladder and become a super user.
In addition, you may also be recognized for your contribution by being highlighted in our News and Announcements board and possibly be featured in a Nokia Conversations article!
Get Engaged and Become a Super User! Best of luck and enjoy!

Will it be "Super Employee of the Month"?

How to disable the Super User menu - (Right click windows icon menu) - Server 2012 R2 - RDS

Greetings all,
Can anyone please advise how to remove the Administrator / Super User menu that appears when you right click the Windows Icon (old start button) in Server 2012 R2 - for RDS users. I have searched and been able to disable access to each of these menu items (Control
Panel, Event Viewer, Run, etc). But I am searching for a way to completely remove the menu. This menu also appears when you use Win-X shortcut.
Hope someone can help.
Terry

Hi Terry,
You can try following points, might helpful in your case. Go to
C:\Users\Default\AppData\Local\Microsoft\Windows
there you will see file called WinX
Right click this file and copy then go to
C:\Users\YOUR_USERNAME\AppData\Local\Microsoft\Windows
then paste the file into the folder.
NOTE: replace YOUR_USERNAME with your actual username.
Hope it helps!
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

HT201303 Has anyone experienced being a victim of GNU Emacs Api Emulations hacking thru URL's - Feeds - Email - Redirect - Data Scrabling and more? We are unable to stop them because they are super users. They come back and do more damage. Help Please.

We have been compromised within our businesses from an empolyee that was terminated with GNU Emac Api enulation program that has infiltrated all of our brand new Apple Computers. We made a decision to move to Mac's this year because of all our businesses being internet based and we are in several different platforms that require many different passcodes, email address, bank accounts, etc. It is not one seamless system that would address one email, password, bank account, etc.
Eacy time we change one segment of our business unit to move to the next one to fix, we go back to check the previous one that we changed and they have already been in the accounts and changed them so that we have to redo them.
The information is so broad and wide that the only way I know to ask this first questions - has anyone had this happen to them? We have seeked many avenues with law, experts, reformating our 2 momth old systems 2-3 times each and start over. They are the super users of this program and we can not get them out by changing passwords, accounts, etc. They have everything we do and make sure they keep changing it as we work on the next segment. They have cost our small business thousands of dollars already.
I am a victim of something that even the local forenic authority is stumped because they don't know where to start. We are not a banking instutition or 100 million dollar company to get the help we need. We don't want to find hackers like they have done to us, we want to get them stopped and get us back on track to start getting our businesses rebuilt.
Lots of stuff, but WE ARE BEGGING for HELP.
Apple Support today spent 3 hours with us on the phone and our suppot representative was awesome, but they also said it was big and we need to reach out to the Apple community to see if they heard of anything like this crime. They are in the URL's, RSS Feeds and ghosting everything we do.
I was told by our local Mac support that this was done by someone that was highly sophicated and they did not know many people that could do this type of damage. I can't image that someone in the Apple community would not know of someone that can assist. The one security company we contacted was around $25,000 to fix this aweful crime.
We just want them stopped and put in jail so we can go back to business before it destoys us completely. They even installed emacs on all of our Iphone and androids. WE are being taped, video recorded and eery key stroke is recored. They are only taking us down in middle America.
Anyone have any ideas? Thank you.

Hi AP_In_Surbiton,
I am really sorry that you have had so much trouble getting your Caller ID up and going. I'll be happy to help you out with this and get it working for you.
Could you drop me in an email please? Use the 'contact us' form in my forum profile under the 'about me' section. You can find it by clicking on my username.
Thx
Craig
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)”
td-p/30">Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

WebI Report using BW Query (Getting Error for User Response Function)

Hello Experts,
I have created WebI Report on top of BW query. All the prompts are coming from BW query. I was trying to create user response function but it's not working. Do I need to use special function or I can't use.
Any help would be highly appreciated.
Thanks
Nisniki

hi Nisniki,
take a look here:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c0a45246-ce76-2b10-e688-f5c8206203eb
Ingo

Not able to access the module from user level i.e., other than Super user.

Hello Friends,
I created company with super user and normal user, for a normal user gave the rights of sales. When logged in with normal user try to create sales order i am experiencing following system message "To generate this document, first define the numbering series in Administration module [Message 131-3]".
Could you please advise me in this regard.
Thanks,
Rayudu

Hi,
Please check the following thread which is being discussed:
Re: "Define the numbering series in Admin module"
For the issue you have reported, kindly refer Note 1057873, which will resolve your issue.
Note says:-
Symptom
When trying to open a document a user gets the system message:
'To Generate this document, first define the numbering series in the Administration module'
Other terms
Authorizations, Document Numbering, Series, access
Reason and Prerequisites
SAP Business One Functionality, Consulting
Solution
A document numbering series have been defined and the user have authorisation to the document type in:
Administration -> System Initialisation -> General Authorisations -> Sales-AR/Purchasing-AP
All document numbering series are also given a Group.
Administration -> System Initialisation -> Document Numbering
Double click to the left of the row to view the existing numbering
series for the document type. The field 'Group' is here. By default this value is 1.
For the Groups there is a separate authorisation.
Administration -> System Initialisation -> Authorisations -> General Authorisations -> Administration -> System Initialisation -> Series
After expanding the 'Series', give the user authorisation to the
Serie/Group that is defined for the document numbering serie it is trying to open.
Also, check for more similar threads in the forum which could help you.
Regards,
Jitin

Projects super user responsibility

Similar Messages

Maybe you are looking for