Proxy for one network

My school have just created a new WiFi network for students, but this involves a proxy server. I can get the proxy server to work so that I can use the internet at school, but each time I change WiFi at the moment, I have to go into "Advanced Network Preferences" and then untick the box the proxy box, so that the details aren't used.
Is there a way I can assign the proxy to just one network?
Thanks.

Create a new "Location"
System Preferences -> Network -> Location -> Edit Locations... -> Gear at bottom -> Duplicate "Automatic"
Give it a unique name (eg. "AtSchool")
Now for the new location give it a Proxy setting.
Now that you have 2 locations, you can use
Apple menu -> Location -> Automatic
Apple menu -> Location -> AtSchool
to easily switch between with proxy and without proxy.
You can then get utilities such as MarcoPolo or LocationX that can automatically detect your current location when you wake from sleep and switch your location.

Similar Messages

Using 2 AP's for One Network

Hi,
I have an AP Extreme and an older Graphite, both wired using ethernet, that I'd like to use to create one wireless network. I live in a log home that one won't begin to cover. Any info on if this is possible and how to set it up would
be greatly appreciated.
Thanks,
Carl

if you can try ethernet connect of older router to newer. Place older in bridge mode and to either join or create its own wireless network.

Two for one networks

Just purchased and installed a Linksys E1550 wireless N Router. Followed all directions and it was fairly easy.
However, I have one big issue/concern. When all was said and done I had two access points with the same name - one with security protection and one with the word guest (unsecured) after its name.
What did I do wrong and more importantly, how do I get rid of the unsecured network?
iMAC system.
Thanks.
Solved!
Go to Solution.

Yes, the factory default user name is blank (no user name needed), and the default password is "admin".
The password can be changed in the GUI, but if you forget it, the only way to change it back to the factory default "admin" is to do a factory "reset", using the router's recessed "reset" switch. That might be the case now, if you used the above user and password, that the password may have gotten changed somehow, so you might need to reset the router to get it back to "admin". The thing to notice is that if you do the "reset" button thing, you'll have to reconfigure your router, since ALL the settings go back to their factory defaults. So it really is kind of a last resort.

Crashes when running applications from network share - "Windows cannot access the file for one of the following reasons"

Hi,
starting a couple of weeks ago, we get the following error(s) when running applications from a network share. We don't know what causes this, we are not aware of any major changes in our network infrastructure or client/Server configuration. We did upgrade
a lot of machines to Windows 8, but the issue also occurs on older Win7 computers.
We figured out a workaround though: The applications run fine when launching from a FQDN share (like
\\share.domain.Company.com) and only cause problems when running from
\\share directly. They have worked fine for years without FQDN though.
Any ideas?
Error Details (the Kind of error differs greatly):
# 1 #
Log Name: Application
Source: Application Error
Date: ...
Event ID: 1005
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: vmDEV
Description:
Windows cannot access the file for one of the following reasons: there is a problem with the network connection, the disk that the file is stored on, or the storage drivers installed on this computer; or the disk is missing. Windows closed the program XYZ
because of this error.
Program: XYZ
File:
The error value is listed in the Additional Data section.
User Action
1. Open the file again. This situation might be a temporary problem that corrects itself when the program runs again.
2. If the file still cannot be accessed and
- It is on the network, your network administrator should verify that there is not a problem with the network and that the server can be contacted.
- It is on a removable disk, for example, a floppy disk or CD-ROM, verify that the disk is fully inserted into the computer.
3. Check and repair the file system by running CHKDSK. To run CHKDSK, click Start, click Run, type CMD, and then click OK. At the command prompt, type CHKDSK /F, and then press ENTER.
4. If the problem persists, restore the file from a backup copy.
5. Determine whether other files on the same disk can be opened. If not, the disk might be damaged. If it is a hard disk, contact your administrator or computer hardware vendor for further assistance.
Additional data
Error value: C000020C [ also seen with code C00000C4]
#2 (German error Messages from now on, we only use German OSes, the above english one is translated based on similar error Messages I found on the web) #
Name der fehlerhaften Anwendung: XYZ.exe, Version: 2015.0.496.5054, Zeitstempel: 0x54ea67c3
Name des fehlerhaften Moduls: clr.dll, Version: 4.0.30319.34014, Zeitstempel: 0x52e0b784
Ausnahmecode: 0xc0000006
Fehleroffset: 0x00026549
ID des fehlerhaften Prozesses: 0x13ac
Startzeit der fehlerhaften Anwendung: 0x01d055a854d36445
Pfad der fehlerhaften Anwendung: \\share\application.exe
Pfad des fehlerhaften Moduls: C:\Windows\Microsoft.NET\Framework\v4.0.30319\clr.dll
Berichtskennung: 949ea933-c19b-11e4-bf04-78542e186754
Vollständiger Name des fehlerhaften Pakets:
Anwendungs-ID, die relativ zum fehlerhaften Paket ist:
Anwendung: XYZ.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: Ausnahmecode c0000006, Ausnahmeadresse 720B6549
Stapel:
# 3 #
Anwendung: WpfApp.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: System.Runtime.InteropServices.SEHException
Stapel:
   bei SP.Forms.AutoCompleteSelectionBase.OnEnter(System.EventArgs)
   bei System.Windows.Forms.Control.NotifyEnter()
   bei System.Windows.Forms.ContainerControl.UpdateFocusedControl()
# 4 #
Anwendung: WpfApp.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: System.Runtime.InteropServices.SEHException
Stapel:
   bei System.IO.UnmanagedMemoryStream.ReadByte()
   bei System.IO.BinaryReader.ReadByte()
   bei System.IO.BinaryReader.Read7BitEncodedInt()
   bei System.Resources.ResourceReader._LoadObjectV2(Int32, System.Resources.ResourceTypeCode ByRef)
   bei System.Resources.ResourceReader.LoadObjectV2(Int32, System.Resources.ResourceTypeCode ByRef)
   bei System.Resources.ResourceReader.LoadObject(Int32, System.Resources.ResourceTypeCode ByRef)
   bei System.Resources.RuntimeResourceSet.GetObject(System.String, Boolean, Boolean)
   bei System.Resources.RuntimeResourceSet.GetObject(System.String, Boolean)
   bei System.Resources.ResourceManager.GetObject(System.String, System.Globalization.CultureInfo, Boolean)
   bei System.Resources.ResourceManager.GetStream(System.String, System.Globalization.CultureInfo)
# 5 #
Anwendung: WpfApp.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: System.Runtime.InteropServices.SEHException
Stapel:
   bei System.Reflection.RuntimeParameterInfo.get_Name()
   bei System.Diagnostics.StackTrace.ToString(TraceFormat)
   bei System.Environment.GetStackTrace(System.Exception, Boolean)
   bei System.Exception.GetStackTrace(Boolean)
   bei System.Exception.ToString(Boolean, Boolean)
   bei System.Exception.ToString(Boolean, Boolean)
   bei System.Exception.ToString(Boolean, Boolean)
   bei System.Exception.ToString()
# 6 #
Name der fehlerhaften Anwendung: XYZ.exe, Version: 2015.0.496.5054, Zeitstempel: 0x54ea834f
Name des fehlerhaften Moduls: KERNELBASE.dll, Version: 6.3.9600.17278, Zeitstempel: 0x53eeb460
Ausnahmecode: 0xe0434352
Fehleroffset: 0x00012f71
ID des fehlerhaften Prozesses: 0xa68
Startzeit der fehlerhaften Anwendung: 0x01d0559cb7ec4ed6
Pfad der fehlerhaften Anwendung: \\share\XYZ.exe
Pfad des fehlerhaften Moduls: C:\WINDOWS\SYSTEM32\KERNELBASE.dll
Berichtskennung: 010514d0-c190-11e4-bf04-78542e186754
Vollständiger Name des fehlerhaften Pakets:
Anwendungs-ID, die relativ zum fehlerhaften Paket ist:
# 7 #
Name der fehlerhaften Anwendung: XYZ.exe, Version: 2015.0.496.5054, Zeitstempel: 0x54ea7a6e
Name des fehlerhaften Moduls: ntdll.dll, Version: 6.3.9600.17630, Zeitstempel: 0x54b0d74f
Ausnahmecode: 0xc0000006
Fehleroffset: 0x0006db27
ID des fehlerhaften Prozesses: 0x18dc
Startzeit der fehlerhaften Anwendung: 0x01d0559cb08529c3
Pfad der fehlerhaften Anwendung: \\share\xyz.exe
Pfad des fehlerhaften Moduls: C:\WINDOWS\SYSTEM32\ntdll.dll
Berichtskennung: ef389186-c18f-11e4-bf04-78542e186754
Vollständiger Name des fehlerhaften Pakets:
Anwendungs-ID, die relativ zum fehlerhaften Paket ist:

Hi,
>>The applications run fine when launching from a FQDN share
It sounds like a DNS suffix issue. When this issue occurs, please try to ping share on the client, then check if the corresponding IP address is correct. If the IP address is wrong, please adjust your settings of DNS to make sure that the client can resolve
the share correctly.
If it's very hard to change the settings of the DNS for some reason, as a work around, we can add the entry into the clients' hosts file.
Best Regards.
Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

When I open iTunes it is slow to open for one, and two when it does see my iPhone and i go to sync it this is what I get in return... The iPhone "My Name here" could not be synced because the iPhone could not be found on the network. that is a pop up box

When I open iTunes it is slow to open for one, and two when it does see my iPhone and i go to sync it this is what I get in return... The iPhone "My Name here" could not be synced because the iPhone could not be found on the network. that is a pop up box in middle of screen that says that it does it like every time I go to sync the phone after i do app updates. I am getting very frustrated by this can someone please help. I have made 2 other discussion topics about this and no replies on them. Please if anyone can help I ask for help. This has occurred ever since the iOS 5.1 update and the iTunes 10.6.0 and still continues with the iTunes 10.6.1 update just yesterday and perhaps even worse now. PLEASE HELP IF YOU CAN. I have looked through my network settings etc and everything looks good here on my side.

When I open iTunes it is slow to open for one, and two when it does see my iPhone and i go to sync it this is what I get in return... The iPhone "My Name here" could not be synced because the iPhone could not be found on the network. that is a pop up box in middle of screen that says that it does it like every time I go to sync the phone after i do app updates. I am getting very frustrated by this can someone please help. I have made 2 other discussion topics about this and no replies on them. Please if anyone can help I ask for help. This has occurred ever since the iOS 5.1 update and the iTunes 10.6.0 and still continues with the iTunes 10.6.1 update just yesterday and perhaps even worse now. PLEASE HELP IF YOU CAN. I have looked through my network settings etc and everything looks good here on my side.

How to remove a network activity for one employee from the worklist?

Hi,
We are using the SAP project system where project resources are assigned network activities. In the worklist in the ESS timesheet, the assigned network activities are displayed for the employee. The problem is when several employees are assigned for a network activity, and one of them no longer should register hours on this activity. How can you remove the assignment (using dates etc.) for only one person so that the network activity no longer is present in his worklist in the timesheet?
Regards,
Petter

Well for this pernr you need to have a special coding to check for network and pernr.
other would be a simple way using cats0003 to validate data an employee records here you can have a individual check
for this pernr that he doesnt record for this activity and throw an error when he does! this is simpler

When I try to open live hot mail I get this message:The Windows Live Network is unavailable from this site for one of the following reasons:

When I try to open live hot mail I get this message: The Windows Live Network is unavailable from this site for one of the following reasons:
* This site may be experiencing a problem
* The site may not be a member of the Windows Live Network
You can:
* You can sign in or sign up at other sites on the Windows Live Network, or try again later at this site.
However, when I open hot mail in IE it opens just fine. Tried changing the password as suggested but it did not help in Firefox.

Clear the cache and the cookies from sites that cause problems.
* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"

I'm currently signed onto my home network and want to go on with another computer but don't remember my password for my network. Does anyone know where to find this? It's a password that I set myself, not the one that came with my router.

I'm currently signed onto my home network and want to go on with another computer but don't remember my password for my network. Does anyone know where to find this? It's a password that I set myself, not the one that came with my router.

It's in your Keychain on the computer you usually use to connect to your network - the "kind" will be "AirPort Network Password".
Your Keychain can be opened by using the Keychain Access program. It is in your Utilities Folder.
Open Keychain Access, and type airport in the search field. You will see a number of entries. Choose the one with the name of your wireless network, open it, and check the box next to "show password". Before it reveals itself you will be asked for your login password - the one you use to log in to your MacBook.
The network password will appear in the box.
Quit Keychain Access.

It works perfectly fine in all wifi networks except for one

Hi everybody!
I have a black macbook from 2007. It works perfectly fine in all wifi networks except for one. It´s a new network, a much faster one they say, that has been installed where I work. It works perfectly fine in my home wifi network and in every other that I have tried to date. It´s just this one.
Might it be that this new, faster wifi freezes the laptop? any experts that can shed some light?

Do you have a case on it?
If so, take it off.
If not, probably an issue with the camera itself so get the iPad replaced.

TS1398 Where do you get passwords for wiFi networks that pop up under "choose a network"? When I tap one it asks for a password. When I tap "join" nothing happens (join is also faded).

How do you find out who is operating a network and how do you then contact them for a password?

Copied from my previous post.
If you don't have access to an available wi-fi network - one that is password locked/protected, you can't join that network - not unless you know the owner of the network and the owner gives you permission to access the network, which means giving you the password for the network.
If the wireless network is not locked/password protected, you should be able to join it. If a free public wi-fi network, many require agreeing to their terms of use which is done via a web page with Safari. A free public wi-fi network at a restaurant that I frequent requires logging in each time with a website provided - without a user name and password. My iPhone connects to the network automatically but I won't have internet access until I login with the website provided automatically with Safari.

I got an iphone from three network Uk, I am planning go to have holidays abroad for one and a half month, I request to my mobile company if they can unlock my iphone to use abroad with another sim , after one week they unlock my mobile.

I got an iphone from three network Uk, I am planning go to have holidays abroad for one and a half month, I request to my mobile company if they can unlock my iphone to use abroad with another sim , after one week they unlock my mobile.and my basic questions , if for any reason someone stole my iphone, they can activate in other country because my iphone is unlocked with the original codes.

Yes.

Where can I read the proxy settings Firefox chose, when configured to use "Auto-detect proxy settings for this network"?

I would like to set my system network proxy settings to those, Firefox chose. Firefox is configured to use "Auto-detect proxy settings for this network" and this works fine. How can I read out the settings Firefox chose, so I can adapt these system?

Hello Richard,
Download MozBackup and make a backup of your bookmarks and passwords. Uninstall firefox and remove ALL folders with the name "Firefox".
Install Firefox and restore your bookmarks and passwords. Now you should have a fresh install so you have to make all settings again.

Safari works for one user but not another on same computer

MacBook with multiple user accounts. Safari (and Firefox) work fine for one user but are unable to open web pages when the other user is logged in. The error in Safar is "Safari can't open the page "http://xxxxxxxxx/" because it could not connect to the server "/xxxxxxx/" . DNS is working for this user. I am able to ping any number of sites from Terminal. Network Preference pane is configured to not require any proxy. This is a case of it was working but now it's not.
Can anybody help with this? I know I can fix this by simply creating another user and transfering the affected user's data to the new account but I would rather not. TIA

HI Bob,
You can test your settings by clicking the big "Test My DNS" button at <https://www.dns-oarc.net/oarc/services/dnsentropy>. If you see "Poor" on any of the tests, don't use that domain name server! Remove it from Apple Menu => System Preferences =>Network =>DNS Servers or similar location in your router if you've got a 'home network'. If all you have is "poor" DNS servers in your list, call your ISP and insist that they give you the address of a name server which is protected against the recently exposed DNS cache-poisoning threat.
Also, open System Preferences/Network. Click the DNS tab. Add these numbers in the DNS Servers box.
208.67.222.222
208.67.220.220
See if that helps.
Carolyn

[iPhone] Programmatically set proxy (for both wifi and gprs/umts)

Hi,
i'm new to iphone developing. I need to write an application which programmatically setup a proxy for all the available connections (that said, gprs/umts and wifi). This is for a leading phone operator.
Now, the standard Preferences.app (from what i understood) sets the proxy only for wifi connection. And the CFNetworkCopySystemProxySettings returns just that (and, moreover, i couldnt find any function to save proxy settings)
So my questions are :
1) is there any API i can use to read / write proxy settings for all the available connection types (network locations) ?
2) if not, there's a way to write directly to /private/var/Preferences/SystemConfiguration/preferences.plist ? i doubt .....
regards,
valerio

I did look at the Settings/Cellular to check the applications. This is one of the steps I did with the person from Verizon who was an "iPhone Specialist". And he didn't see anything unusual. And I can honestly tell you they have very minimal number of apps on their phones.
When I went to the Apple Store the first time with this problem, they had me update the phones iOS systems to see if this would correct the problem. They were each running older versions but different versions. One son had one update to do and the other had a couple of updates needed. So, the problem started before they were updated and they weren't even on the same update. And nothing changed after we did the updates.
I didn't reboot the router and modem, because I'm not having any other issues with my phone, my husband's phone, our iPad, xbox, PS3, or laptops. Would the wifi only affect their phones?

Bypass Proxy for Local Addresses - Office 365 connection/ Outlook 2010

This is a strange one. Connectivity to Office 365 within our netwotk works fine although very slow for outlook 2010 client to initially connect. Once connected, it works ok. I have done a netwotk trace using netmon to see if i can identify
the reason for the slow startup (2 mins minumum for profile to load and for outlook to connect to exchange). The trace tell me that my local pc tries to make a direct connection to the office365 external IPs first, then tries the TMG proxy. Once it hits the
proxy, it kicks into life and works.
So it looks to me like it thinks the external IP address of office 365 is an internal address and spends it time trying all the ip addresses until it trys the proxy. At this point, the
Bypass Proxy Server for Local Addresses is ticked.
As soon as i untick this box, all traffic heads directly to the proxy and of course it connects like lighting. The exchange settings proxy is set in outlook for "on fast networks, connect using HTTP first, then connect using TCP/IP" (tick
is on) and the same for slow networks.
I cant for the life of me work out why it tries to connect directly to the external IPs first and not connect via TMG until i untick the
Bypass Proxy Server for Local Addresses
Would love any ideas that may assist.

We have been in discussions with Microsoft over the last few days on this issue - which is seen with Outlook 2007 versions onwards. Extract from resolution communication from Microsoft:
The issue you have raised is known as it has been reported and when you have a proxy set in Internet Explorer and “Bypass proxy settings for local addresses”, Outlook will attempt to connect to Office 365 directly – like the bypass rule would apply.
Because the direct connection is blocked in the Firewall, Outlook needs to have the connections going in Timeout before attempting to connect using the Proxy.
Your network trace proves the issue.
Microsoft have scheduled a fix for Outlook 2010 in February 2014 cumulative update. A fix for Outlook 2013 will also follow, but Outlook 2007 will not be addressed because it is in Extended Support.
There are two possible workarounds for this behaviour:
First, and I wouldn’t recommend it, is to allow Direct traffic through the Firewall to Office 365.
The advantage of this approach is that it will be done centralized and it will impact everyone immediately.
Information about the O365 IP addresses
There are two downsides to this behaviour:
1. First you need to maintain the Firewall exceptions as IP from O365 server can change without notice
2. Second, winhttp traffic may go through both proxy and direct and this can cause unforeseen behaviour.
The second approach is to use a proxy pac instead of manually setting in the proxy and the exceptions.
The advantage is that you will have centralized method to control how winhttp traffic goes and the issue will not be experienced anymore.
If a single pac does not be fit, you can configure proxy pac files for each site requirements and use an IIS server to store it.

Proxy for one network

Similar Messages

Maybe you are looking for