PS 2010 - sample proposal PDP's not displaying most fields

Hi,
Attempting to demo the sample out-of-box workflow but Proposal Summary page only shows "Name" and Proposal Details page is totally blank.  Additional Workflow data is showing that it can't proceed due to "comparebudgetcostpropery"
needs a value.  I have read that the sample workflow needs to know the cost due to the $ limit that is hard coded.  So I've added that field to the Proposal Summary PDP.  I just can't get the fields to display.
Have created a test EPT utilizing Sample Proposal Workflow
Checked Proposal Summary and Proposal Details page settings. Both should be showing a number of fields.  Have checked those fields and they are not associated with any department
Hopefully I'm missing something really easy here.
Thanks in advance for your help!

Thanks Prasanna, but as it turns out I was able to fix it by opening up each of the Enterprise Custom Fields (Sample Proposal Cost, Sample Approved Finish Date, etc ...) and then saving them without making any changes.  Then they showed up as visible
fields in the PDP's.  Very strange ...

Similar Messages

  • ALV grid is not displaying few fields of final internal table of type DMBTR

    hello frnds,
    i am displaying 10 fields in ALV grid using field catalog.
    among them five fields are currency fields on which i doing some arithematic operations. but all these fields are not getting displayed in alv grid.
    here is my code....
    declaring final strucutre to generate report
    TYPES:BEGIN OF ty_final,
              gjahr   TYPE gjahr,       " Year
              wwert   TYPE wwert_d,     " Traslation date
              bukrs   TYPE bukrs,       " company code
              hkont   TYPE hkont,       " General ledger account
              txt20   TYPE txt20_skat,  " Account name
              belnr   TYPE belnr_d,     " Purchase order number
              shkzg   TYPE shkzg,       " Dt/Cr indicator
              dmbtr1   TYPE dmbtr,       " Ammount in local currency
              v_alc   TYPE dmbtr,       " Ammount in local currency
              wrbtr   TYPE wrbtr,       " Ammount in foreign currency
              ebeln   TYPE ebeln,       " Purchase order number
              ebelp   TYPE ebelp,       " Item number
              matnr   TYPE matnr,       " Material number
              menge   TYPE menge_d,     " Qunatity
              meins   TYPE meins,       " Unit of measure
              stprs   TYPE stprs,       " Std material master
              v_iv    TYPE dmbtr,       " Invoice value
              pswsl   TYPE pswsl,       " Currency
              v_erc   TYPE dmbtr,       " Exchange rate calculated
              v_op    TYPE dmbtr,       " Order price
              v_uos   TYPE dmbtr,       " Unit order to stock
              v_io    TYPE dmbtr,       " Invoice to order
              v_uv    TYPE dmbtr,       " Unit value
              v_t     TYPE dmbtr,       " Total
              v_d     TYPE dmbtr,       " Differecne
              netpr   TYPE bprei,       " Net price in purchasing document
              v_total TYPE dmbtr,       " Total
              v_os    TYPE dmbtr,       " Order to stock
              v_ito   TYPE dmbtr,       " Invoice to order
              saknr   TYPE saknr,       " G/L account number
           END OF ty_final.
    FORM move_data.
      IF NOT i_bseg[] IS INITIAL.
        LOOP AT i_bseg INTO wa_bseg.
          wa_final-gjahr  = wa_bseg-gjahr.
          wa_final-bukrs  = wa_bseg-bukrs.
          wa_final-hkont  = wa_bseg-hkont.
          wa_final-belnr  = wa_bseg-belnr.
          wa_final-shkzg  = wa_bseg-shkzg.
          wa_final-wrbtr  = wa_bseg-wrbtr.
          wa_final-ebeln  = wa_bseg-ebeln.
          wa_final-ebelp  = wa_bseg-ebelp.
          wa_final-matnr  = wa_bseg-matnr.
          wa_final-menge  = wa_bseg-menge.
          wa_final-meins  = wa_bseg-meins.
          wa_final-pswsl  = wa_bseg-pswsl.
          wa_final-dmbtr1  = wa_bseg-dmbtr.
          wa_final-saknr  = wa_bseg-saknr.
          wa_final-v_total = wa_bseg-dmbtr.
          READ TABLE i_bkpf INTO wa_bkpf WITH KEY bukrs = wa_bseg-bukrs.
          IF sy-subrc = 0.
            wa_final-wwert = wa_bkpf-wwert.
          ENDIF.
         CLEAR wa_bkpf.
          READ TABLE i_mbew INTO wa_mbew WITH KEY matnr = wa_bseg-matnr.
          IF sy-subrc = 0.
            wa_final-stprs = wa_mbew-stprs.
          ENDIF.
         CLEAR wa_mbew.
          READ TABLE i_ekpo INTO wa_ekpo WITH KEY ebeln = wa_bseg-ebeln.
          IF sy-subrc = 0.
            wa_final-netpr = wa_ekpo-netpr.
          ENDIF.
         CLEAR wa_ekpo.
          READ TABLE i_skat INTO wa_skat WITH KEY saknr = wa_bseg-saknr.
          IF sy-subrc = 0.
            wa_final-txt20 = wa_skat-txt20.
          ENDIF.
    calculating output values
          IF wa_bseg-shkzg = 'H'.
            wa_final-v_alc = -1 * wa_bseg-dmbtr.
          ELSEIF wa_bseg-shkzg = 'S'.
            wa_final-v_alc = 1 * wa_bseg-dmbtr.
          ENDIF.
         DATA : l_c_v_alc TYPE p DECIMALS 2,
         l_c_v_iv TYPE p DECIMALS 2.
         l_c_v_alc = wa_final-v_alc.
          IF wa_bseg-menge NE 0.
            wa_final-v_iv = wa_bseg-dmbtr / wa_bseg-menge.
          ENDIF.
          IF wa_bseg-dmbtr NE 0.
            wa_final-v_erc  = wa_bseg-wrbtr   / wa_final-dmbtr1.
          ENDIF.
          IF wa_final-v_erc NE 0.
            wa_final-v_op   = wa_ekpo-netpr   / wa_final-v_erc.
          ENDIF.
          wa_final-v_uos  = wa_mbew-stprs   - wa_final-v_op.
          wa_final-v_io   = wa_final-v_iv   + wa_final-v_uos.
          wa_final-v_uv   = wa_final-v_uos  + wa_final-v_io.
          wa_final-v_t    = wa_final-v_uv   + wa_bseg-menge.
          wa_final-v_d    = wa_final-v_t    - wa_final-v_alc.
          wa_final-v_os   = wa_final-v_uos  * wa_bseg-menge.
          wa_final-v_ito  = wa_final-v_io   * wa_bseg-menge.
          CLEAR wa_bseg.
          APPEND wa_final TO i_final.
          CLEAR wa_final.
        ENDLOOP.
      ENDIF.
    ENDFORM.                    "data_retrieval
    *&      Form  build_fieldcat
          text
    -->  p1        text
    <--  p2        text
    FORM build_fieldcat.
      CLEAR wa_fieldcat.
    *  TYPES : v_alc TYPE dmbtr. "curr. " decimal 2.
    DATA: l_c_v_alc TYPE p DECIMALS 2,
    l_c_v_iv TYPE p DECIMALS 2 .
    l_c_v_alc = v_alc.
    l_c_v_iv = v_iv.
    Constant Declarations.
      CONSTANTS:
                l_c_gjahr(5)   TYPE c VALUE 'GJAHR',      " Year
                l_c_wwert(5)   TYPE c VALUE 'WWERT',      " Traslation date
                l_c_bukrs(5)   TYPE c VALUE 'BUKRS',      " company code
                l_c_hkont(5)   TYPE c VALUE 'HKONT',      " General ledger account
                l_c_txt20(10)  TYPE c VALUE 'TXT20',      " Account name
                l_c_belnr(5)   TYPE c VALUE 'BELNR',      " Doc number
                l_c_shkzg(5)   TYPE c VALUE 'SHKZG',      " Dt/Cr indicator
                l_c_dmbtr(5)   TYPE c VALUE 'DMBTR1',      " Ammount in local currency
               " l_c_v_alc      TYPE c VALUE 'V_ALC',      " Ammount in local currency
                l_c_wrbtr(5)   TYPE c VALUE 'WRBTR',      " Ammount in foreign currency
                l_c_ebeln(5)   TYPE c VALUE 'EBELN',      " Purchase order number
                l_c_ebelp(5)   TYPE c VALUE 'EBELP',      " Item number
                l_c_matnr(5)   TYPE c VALUE 'MATNR',      " Material number
                l_c_menge(7)   TYPE c VALUE 'MENGE',      " Qunatity
                l_c_meins(5)   TYPE c VALUE 'MEINS',      " Unit of measure
                l_c_stprs(5)   TYPE c VALUE 'STPRS',      " Std material master
               " l_c_v_iv(4)    TYPE c VALUE 'V_IV',           " Invoice value
                l_c_pswsl(5)   TYPE c VALUE 'PSWSL',      " Currency
                l_c_v_erc(5)   TYPE c VALUE 'V_ERC',      " Exchange rate calculated
                l_c_v_op(4)    TYPE c VALUE 'V_OP',       " Order price
                l_c_v_uos(5)   TYPE c VALUE 'V_UOS',      " Unit order to stock
                l_c_v_io(4)    TYPE c VALUE 'V_IO',       " Invoice to order
                l_c_v_uv(4)    TYPE c VALUE 'V_UV',       " Unit value
                l_c_v_t(3)     TYPE c VALUE 'V_T',        " Total
                l_c_v_d(3)     TYPE c VALUE 'V_D',        " Differecne
                l_c_netpr(5)   TYPE c VALUE 'NETPR',      " Net price in purchasing document
                l_c_v_total(7) TYPE c VALUE 'V_TOTAL',    " Total
                l_c_v_os(4)    TYPE c VALUE 'V_OS',      " Order to stock
                l_c_v_ito(5)   TYPE c VALUE 'V_ITO',      " Invoice to order
                l_c_saknr(5)   TYPE c VALUE 'SAKNR',      " G/L account number
                l_c_i_final(7) TYPE c VALUE 'I_FINAL'.    " Final internal table
    Fieldcat for fiscal year
      wa_fieldcat-col_pos   =  1.
      wa_fieldcat-tabname   = l_c_i_final.
      wa_fieldcat-fieldname = l_c_gjahr.
      wa_fieldcat-seltext_m = text-007.
      APPEND wa_fieldcat TO i_fieldcat.
      CLEAR wa_fieldcat.
    Fieldcat for Translation date
      wa_fieldcat-col_pos   =  2.
      wa_fieldcat-tabname   = l_c_i_final.
      wa_fieldcat-fieldname = l_c_wwert.
      wa_fieldcat-seltext_m = text-008.
      APPEND wa_fieldcat TO i_fieldcat.
      CLEAR wa_fieldcat.
    Fieldcat for Company code
      wa_fieldcat-col_pos   =  3.
      wa_fieldcat-tabname   = l_c_i_final.
      wa_fieldcat-fieldname = l_c_bukrs.
      wa_fieldcat-seltext_m = text-009.
      APPEND wa_fieldcat TO i_fieldcat.
      CLEAR wa_fieldcat.
    Fieldcat for General ledger account
      wa_fieldcat-col_pos   =  4.
      wa_fieldcat-tabname   = l_c_i_final.
      wa_fieldcat-fieldname = l_c_hkont.
      wa_fieldcat-seltext_m = text-010.
      APPEND wa_fieldcat TO i_fieldcat.
      CLEAR wa_fieldcat.
    Fieldcat for Account name
      wa_fieldcat-col_pos   =  5.
      wa_fieldcat-tabname   = l_c_i_final.
      wa_fieldcat-fieldname = l_c_txt20.
      wa_fieldcat-seltext_m = text-011.
      APPEND wa_fieldcat TO i_fieldcat.
      CLEAR wa_fieldcat.
    Fieldcat for Doc number
      wa_fieldcat-col_pos   =  6.
      wa_fieldcat-tabname   = l_c_i_final.
      wa_fieldcat-fieldname = l_c_belnr.
      wa_fieldcat-seltext_m = text-012.
      APPEND wa_fieldcat TO i_fieldcat.
      CLEAR wa_fieldcat.
    Fieldcat for Dt/Cr indicator
      wa_fieldcat-col_pos   =  7.
      wa_fieldcat-tabname   = l_c_i_final.
      wa_fieldcat-fieldname = l_c_shkzg.
      wa_fieldcat-seltext_m = text-013.
      APPEND wa_fieldcat TO i_fieldcat.
      CLEAR wa_fieldcat.
    Fieldcat for Ammount in local currency
      wa_fieldcat-col_pos   =  8.
      wa_fieldcat-tabname   = l_c_i_final.
      wa_fieldcat-fieldname = 'DMBTR1'.
      wa_fieldcat-seltext_m = text-014.
      APPEND wa_fieldcat TO i_fieldcat.
      CLEAR wa_fieldcat.
    Fieldcat for Ammount in local currency
      wa_fieldcat-col_pos   =  9.
      wa_fieldcat-tabname   = l_c_i_final.
      wa_fieldcat-fieldname = 'V_ALC'.
      wa_fieldcat-seltext_m = text-015.
      wa_fieldcat-ref_fieldname = 'DMBTR'.
    wa_fieldcat-no_sign   = 'X'.
    wa_fieldcat-do_sum    =  c_x.
      APPEND wa_fieldcat TO i_fieldcat.
      CLEAR wa_fieldcat.
    Fieldcat for Ammount in foreign currency
      wa_fieldcat-col_pos   =  10.
      wa_fieldcat-tabname   = l_c_i_final.
      wa_fieldcat-fieldname = l_c_wrbtr.
      wa_fieldcat-seltext_m = text-016.
      APPEND wa_fieldcat TO i_fieldcat.
      CLEAR wa_fieldcat.
    Fieldcat for Purchse order number
      wa_fieldcat-col_pos   =  11.
      wa_fieldcat-tabname   = l_c_i_final.
      wa_fieldcat-fieldname = l_c_ebeln.
      wa_fieldcat-seltext_m = text-017.
      APPEND wa_fieldcat TO i_fieldcat.
      CLEAR wa_fieldcat.
    Fieldcat for Item No
      wa_fieldcat-col_pos   =  12.
      wa_fieldcat-tabname   = l_c_i_final.
      wa_fieldcat-fieldname = l_c_ebelp.
      wa_fieldcat-seltext_m = text-018.
      APPEND wa_fieldcat TO i_fieldcat.
      CLEAR wa_fieldcat.
    Fieldcat for Material number
      wa_fieldcat-col_pos   =  13.
      wa_fieldcat-tabname   = l_c_i_final.
      wa_fieldcat-fieldname = l_c_matnr.
      wa_fieldcat-seltext_m = text-019.
      APPEND wa_fieldcat TO i_fieldcat.
      CLEAR wa_fieldcat.
    Fieldcat for Qunatity
      wa_fieldcat-col_pos   =  14.
      wa_fieldcat-tabname   = l_c_i_final.
      wa_fieldcat-fieldname = l_c_menge.
      wa_fieldcat-seltext_m = text-020.
      APPEND wa_fieldcat TO i_fieldcat.
      CLEAR wa_fieldcat.
    Fieldcat for Unit of measure
      wa_fieldcat-col_pos   =  15.
      wa_fieldcat-tabname   = l_c_i_final.
      wa_fieldcat-fieldname = l_c_meins.
      wa_fieldcat-seltext_m = text-021.
      APPEND wa_fieldcat TO i_fieldcat.
      CLEAR wa_fieldcat.
    Fieldcat for Std material master
      wa_fieldcat-col_pos   =  16.
      wa_fieldcat-tabname   = l_c_i_final.
      wa_fieldcat-fieldname = l_c_stprs.
      wa_fieldcat-seltext_m = text-022.
      APPEND wa_fieldcat TO i_fieldcat.
      CLEAR wa_fieldcat.
    Fieldcat for Invoice value,
      wa_fieldcat-col_pos   =  17.
      wa_fieldcat-tabname   = l_c_i_final.
      wa_fieldcat-fieldname = 'V_IV'.
      wa_fieldcat-seltext_m = text-023.
      wa_fieldcat-ref_fieldname = 'DMBTR'.
      APPEND wa_fieldcat TO i_fieldcat.
      CLEAR wa_fieldcat.
    Fieldcat for Currency
      wa_fieldcat-col_pos   =  18.
      wa_fieldcat-tabname   = l_c_i_final.
      wa_fieldcat-fieldname = l_c_pswsl.
      wa_fieldcat-seltext_m = text-024.
      APPEND wa_fieldcat TO i_fieldcat.
      CLEAR wa_fieldcat.
    Fieldcat for Exchange rate calculated
      wa_fieldcat-col_pos   =  19.
      wa_fieldcat-tabname   = l_c_i_final.
      wa_fieldcat-fieldname = 'V_ERC'.
      wa_fieldcat-seltext_m = text-025.
      APPEND wa_fieldcat TO i_fieldcat.
      CLEAR wa_fieldcat.
    Fieldcat for Order price
      wa_fieldcat-col_pos   =  20.
      wa_fieldcat-tabname   = l_c_i_final.
      wa_fieldcat-fieldname = l_c_v_op.
      wa_fieldcat-seltext_m = text-026.
      APPEND wa_fieldcat TO i_fieldcat.
      CLEAR wa_fieldcat.
    Fieldcat for Unit order to stock
      wa_fieldcat-col_pos   =  21.
      wa_fieldcat-tabname   = l_c_i_final.
      wa_fieldcat-fieldname = l_c_v_uos.
      wa_fieldcat-seltext_m = text-027.
      wa_fieldcat-do_sum    = c_x.
      APPEND wa_fieldcat TO i_fieldcat.
      CLEAR wa_fieldcat.
    Fieldcat for Invoice to order
      wa_fieldcat-col_pos   =  22.
      wa_fieldcat-tabname   = l_c_i_final.
      wa_fieldcat-fieldname = l_c_v_io.
      wa_fieldcat-seltext_m = text-028.
      APPEND wa_fieldcat TO i_fieldcat.
      CLEAR wa_fieldcat.
    Fieldcat for Unit value
      wa_fieldcat-col_pos   =  23.
      wa_fieldcat-tabname   = l_c_i_final.
      wa_fieldcat-fieldname = l_c_v_uv.
      wa_fieldcat-seltext_m = text-029.
      APPEND wa_fieldcat TO i_fieldcat.
      CLEAR wa_fieldcat.
    Fieldcat for Total
      wa_fieldcat-col_pos   =  24.
      wa_fieldcat-tabname   = l_c_i_final.
      wa_fieldcat-fieldname = l_c_v_t.
      wa_fieldcat-seltext_m = text-030.
      APPEND wa_fieldcat TO i_fieldcat.
      CLEAR wa_fieldcat.
    Fieldcat for Difference
      wa_fieldcat-col_pos   =  25.
      wa_fieldcat-tabname   = l_c_i_final.
      wa_fieldcat-fieldname = l_c_v_d.
      wa_fieldcat-seltext_m = text-031.
      APPEND wa_fieldcat TO i_fieldcat.
      CLEAR wa_fieldcat.
    Fieldcat for Net Price in Purchasing Document
      wa_fieldcat-col_pos   =  26.
      wa_fieldcat-tabname   = l_c_i_final.
      wa_fieldcat-fieldname = l_c_netpr.
      wa_fieldcat-seltext_m = text-032.
      APPEND wa_fieldcat TO i_fieldcat.
      CLEAR wa_fieldcat.
    Fieldcat for Total
      wa_fieldcat-col_pos   =  27.
      wa_fieldcat-tabname   = l_c_i_final.
      wa_fieldcat-fieldname = l_c_v_total.
      wa_fieldcat-seltext_m = text-033.
      APPEND wa_fieldcat TO i_fieldcat.
      CLEAR wa_fieldcat.
    Fieldcat for Order to stock
      wa_fieldcat-col_pos   =  28.
      wa_fieldcat-tabname   = l_c_i_final.
      wa_fieldcat-fieldname = l_c_v_os.
      wa_fieldcat-seltext_m = text-034.
      APPEND wa_fieldcat TO i_fieldcat.
      CLEAR wa_fieldcat.
    Fieldcat for Invoice to order
      wa_fieldcat-col_pos   =  29.
      wa_fieldcat-tabname   = l_c_i_final.
      wa_fieldcat-fieldname = l_c_v_ito.
      wa_fieldcat-seltext_m = text-035.
      APPEND wa_fieldcat TO i_fieldcat.
      CLEAR wa_fieldcat.
    fieldcat for invoice to order
      wa_fieldcat-col_pos   =  30.
      wa_fieldcat-tabname   = l_c_i_final.
      wa_fieldcat-fieldname = l_c_saknr.
      wa_fieldcat-seltext_m = text-035.
      APPEND wa_fieldcat TO i_fieldcat.
      CLEAR wa_fieldcat.
    ENDFORM.                    "build_fieldcat

    Hi romanch,
    defining the field catalog you must reference all currency fields to the respective currency key field (type CUKY).
    <alv_fieldcat>-cfieldname         = 'HWAER'.
    This is sample for alv output of a currency field. The alv structure has a field HWAER which carries the currency key, e.g. USD or so.
    Obviously you do not provide a cutrrency key for your values. If they are initial (zero), ALV will not display them as 0,00 but leave the field empty if the reference too currency key is not established.
    If you define a DDIC structure for the ALV output this refernce is enforced. You can pass the DDIC structure name to the ALV and don not have to create the field catalog manually.
    Regards,
    Clemens

  • Jerky scrolling and Safari not displaying most jpegs in one user a/c

    Hi
    I upgraded my 15" mid 2010 MBP to Mountain Lion and find that it is behaving oddly. I have two different user accounts and the oddities vary between accounts. In one, most jpegs in Safari are not displayed, substituted with black rectangles with patterns of coloured dots (in the other, there is no problem with rendering pictures). The scrolling of pages is extremely jerky in Safari and far from perfect elsewhere (slightly jerky in Preview eg). Even the dock magnification is jerky, with icons breaking up as you pass over them.
    In both accounts the scroll bar in Safari flickers on and off irrespective of whether the setting in General prefs is for the scroll bar to display permanently or not. The less troubled user account is noticeably snappier in action (eg opens the About this Mac screen with no delay compared with a second or so in the other account).
    I've tried ditching the caches for Sarari with no effect. I rebuilt permissions after the install. I'm at a loss to know what to do next as it feels like a generic video problem but, bizarrely is more or less confined to one account.
    Any clues?
    Best
    J

    bizarrely is more or less confined to one account.
    Check Safari > Preferrences > Extensions
    If there are any installed, turn that OFF, quit then relaunch Safari to test.
    If it's not an extension issue, try troubleshooting third party plugins.
    Help here >  Safari: Unsupported third-party add-ons may cause Safari to unexpectedly quit or have performance issues

  • User Profile Synchronization not displaying Title field correctly

    Hello,
    I've an issue with User Profile Synchronization (SP 2010). The Title field is displaying correctly for most of the users but still there are few user for them the Title field is blank. However in "User Information List" it displays the Title field
    properly for those users. But in Central Administration when I check the User Profiles it's blank.I have already run Full Profile Synchronization few times in Central Administrations. Every time it's shows as successful but still no luck, still the Title field
    is blank for some profiles.
    Can anybody help on this? Thanks in advance.

    Hi ,
    Firstly , I need to verify the followings:
    Whether the title field of user information list is changed if you type a value in user profile page and perform full sync.
    Whether you have upgraded to SharePoint 2010.
    If you have upgraded to SharePoint 2010, you need to make sure the user information list is mapped or connected to AD directly. More information, please refer to the post below:
    http://social.msdn.microsoft.com/Forums/sharepoint/en-US/926abf50-83a0-4e9c-a4cb-4848fcf4f88d/sharepoint-2010-userprofile-title-field-empty?forum=sharepointgeneralprevious
    If this issue still exists, please create a new User Profile Services Application, and compare the result.
    Here are some similar posts for you to take a look at:
    http://social.technet.microsoft.com/Forums/en-US/0b9b5747-80b2-4a2e-8e8e-c918bc9d6cbd/user-profile-synchronization-not-working-correctly?forum=sharepointadmin
    http://blog-sharepoint.blogspot.in/2010/08/user-information-list-not-synchronised.html
    I hope this helps.
    Thanks,
    Wendy
    Wendy Li
    TechNet Community Support

  • Content Query Web Part will not display all fields.

    I would love some assistance on this.  When I choose fields to display in the Web Part they do not appear.  And I should say the the article "How to: Display Custom Fields in a Content Query Web Part" on the Developer Network is
    a great start but it is only applicable to '07 and '10.  Where is the detailed info for SP 2013??

    Hi,
    According to your description, my understanding is that you want to display custom columns in Content Query web part in SharePoint 2013.
    Per my knowledge, the method for SharePoint 2013 to display custom columns in Content Query web part is the same with SharePoint 2010.
    The method in the link below is also can be used for SharePoint 2013:
    http://msdn.microsoft.com/en-us/library/ms497457(v=office.14).ASPX
    Do you encounter any issue when customizing in in a Content Query Web Part?
    Here are some links about customizing the ItemStyle.xsl to display custom columns in Content Query web part in SharePoint 2013 for you to take a look:
    http://prafulgoyal.blogspot.in/2013/04/sharepoint-content-query-webpart-oob.html
    http://social.msdn.microsoft.com/Forums/en-US/49739730-47c1-43df-9d0e-ad506e6ca31b/display-multiple-columns-in-content-query-webpart
    http://social.msdn.microsoft.com/Forums/en-US/1484df2b-0fb9-4b58-b833-a75019db88c7/content-query-display-multiple-columns?forum=sharepointgeneral
    Best regards.
    Thanks
    Victoria Xia
    TechNet Community Support

  • Not display in field catalog

    hallow i have field catalog and i wont to not display some colman how can i do that ? thankes

    hi antonio,
    if you have a fieldcatalog built up, just delete the row in the fieldcatalog which has the column, and preferably re-adjust the col_pos field value for the other fields
    another option is in the fieldcatalog u might find a field called NO_OUT, just pass 'X' value to it in the column. This would be an easier option to implement.
    Hope it helps.
    Rgds
    adi

  • Ipad contacts not displaying all fields from mac address book, ipad contacts not displaying all fields from mac address book

    After syncing mac address book to ipad contacts, the ipad does not display all the fields that were in Mac address book (in my case all the email addresses).  Anyone have a fix?

    I have a problem similar to DeeRun's.. I would like the IM fields to be synced.. I use them to send e-mails to when the e-mail field is empty or when i just want to use that specific address.. Very annoying, would take hours if not days to transfer all those IM adresses to e-mail fields in addressbook..
    EDIT: not to mention the mess it would make in my address book!
    Message was edited by: 1NStanley

  • CL20N can not display added fields in the search result ?

    Hi,
    In needs of displaying storage location for each material in the transaction CL30N , we use the user exit CLCLRS01 and CLCLRS02 to add new field. But after that the added field is not displayed
    Have you ever tried this ?
    thanks

    Hi,
    Please find below the code for adding the fields. This code is present in the FM 'EXIT_SAPLCLRS_001'.
    If the field added is from database, then the field needs to be added in table 'LT_ONLY_THIS_FIELDS'(see below FM). Else, the fields needs to be added in the table 'ET_FIELDS' as shown below.
          CALL FUNCTION 'CLRS_GET_FIELDS_OF_STRUCTURE'
               EXPORTING
                    I_STRUCTURE         = 'MARC'
                    I_LANGUAGE          = I_LANGUAGE
               TABLES
                    IT_ONLY_THIS_FIELDS = LT_ONLY_THIS_FIELDS
            IT_EXCLUDE_FIELDS   =
                    ET_FIELDS           = ET_FIELDS
                    ET_FIELDS_TEXT      = ET_FIELDS_TEXT.
          CALL FUNCTION 'CLRS_GET_FIELDS_OF_STRUCTURE'
               EXPORTING
                    I_STRUCTURE         = 'DRAW'
                    I_LANGUAGE          = I_LANGUAGE
                    I_FIRST_CALL        = 'X'
               TABLES
                    IT_ONLY_THIS_FIELDS = LT_ONLY_THIS_FIELDS
            IT_EXCLUDE_FIELDS   =
                    ET_FIELDS           = ET_FIELDS
                    ET_FIELDS_TEXT      = ET_FIELDS_TEXT.
      ENDCASE.
    Here a field which are not from a database table is added
      ET_FIELDS-FIELDNAME = 'JUST_TEST'.
      ET_FIELDS-GROUPKEY  = 'C'.
      ET_FIELDS-DATATYPE  = 'NUM'.
      ET_FIELDS-LENGTH    = 2.
      ET_FIELDS-DECIMALS  = 0.
      APPEND ET_FIELDS.
    Regards,
    Rajesh

  • Outlook 2010/Exchange 2007 Calendar Will Not Display

    Hi Folks,
    I've been working on an issue for the past 3 weeks and would love some assistance.
    Here's the problem:
    A user indicated that she was using Outlook normally, flipping between the Mail and Calendar tab. When she went back to the Calendar tab, the navigation pane switched to the Calendar tab, but the main pane and ribbon were still showing Mail content.
    The only way for her to display her Calendar properly is to right-click on Calendar and select "Open in New Window" - but even then if she goes to the Mail tab, she cannot go back to her Calendar again.
    Please note we are running on Exchange version 8.3.327.1
    Here are the fixes I've attempted:
    New OST file
    New Mail profile
    Ran outlook.exe with the following switches:  /safe /cleanrules /cleanview /resetfolders /resetnavpane 
    Please note: resetnavpane breaks the OST file and requires me to create a new OST file for the user
    Open Mailbox on a different computer - that same issue occurs
    Open Mailbox in webmail - the calendar is displayed properly
    Odds n Ends: Hitting CTRL + 6, Hitting F5.
    I've run out of ideas and would appreciate any ideas to resolve this problem
    Thanks!
    Derek

    Hi Derek,
    It should not be an Exchange issue. Based on my research, there is no feature in Exchange server can configure the Outlook reading pane or navigation pane performance. Since there is only one user encounter this issue and OWA can work well, please check
    the following points to narrow down the issue:
    1. Please configure your Outlook account in your colleague’s domain-joined computer with your colleague’s domain account to check whether the issue is caused by your Roaming Profile.
    2. Configure Outlook account outside the domain by using Outlook Anywhere to check whether the issue is caused by any policy in your domain.
    Thanks,
    Winnie Liang
    TechNet Community Support

  • Mail not displaying most recent messages --1000 message capacity?

    Sorry if this is a duplicate topic, I seached, but found nothing.
    Here's my situation:
    I have two email account on my iPhone. One is gmail, and one is my school email account. Before today, I have had no issues with mail at all, however, this morning when I go to check my school email, it showed me emails from last November as being the newest emails (and had correctely marked them as read). At the bottom of the list of emails, it said displaying "some number" out of 1000 messages. I have well over 1700 emails on this account so I do not understand why it was only counting up to 1000 of them all of the sudden, since I had passed the 1000 message barrier a long time ago.
    After deleting tons of old emails, my phone then displayed messages from March of 2009, and still said "out of 1000" at the bottom. So, I logged onto my email and saw that I still had 1064 messages in the inbox. I then deleted more old messages until the inbox was at well under 900, and then all of the "missing" mail came through.
    So, after my longwinded story, I guess I'm trying to ask why that happened, and if there is some email capacity I reached. I only have my phone display the last 50 messages, so I do not understand why it even matter how many messages are in the inbox.
    Sorry if my wording is terrible... It's Friday and I'm tired.
    thanks for any help!

    I have the same problem and posted about it. So it's confirmed it's happening to more than 1 person. I also have 2 accounts setp up. Both are yahoo. One account is fine the other shows mail from 2 years ago as recent. I have over 2k messages in one folder and I can not delete them. They are work history. That's why I love the new yahoo cause it works like gmail and I can search that history now.
    Anyway I need this fixed cause the inbox only shows about 10 new messages and then only shows like 6 months ago and older.
    They have worked fine over the last month and now all the sudden I get up this morning and it went to crap..

  • DW CS4 Not Displaying Recordset Fields

    I have created a database connection to an MS SQL database
    and binding and was trying to display the records as the repeated
    rows in a table. Through much testing I have found that the only
    way I can get the values from the various fields to show is to
    order the fields in the same fashion that the binding returns them.
    If I put them in any other order, only some fields show up. The
    fields are a mix of integer and nvarchar. This all worked fine
    under DW MX2004. Apparently something has changed and I don't know
    what it is.
    The attached code shows only the first two fields. If you
    reverse the second and third fields, all three fields will display.
    Can anyone enlighten me as to what has changed and what to do to
    resolve this issue??
    Thanks,
    Keith Bobick

    Walt F. Schaefer wrote:
    > I thought CS4 dropped ASP support. No?
    No DWCS4 did not drop ASP support. You can see what was
    dropped here:
    http://help.adobe.com/en_US/Dreamweaver/10.0_Using/WS2C41F19D-502B-4fb5-8A54-4442E2127C84a .html
    To answer the OP, if you created the recordsets in DW8 or
    DW8.0.1 and not in DW8.0.2 then it may be due to the change in
    recordset code for ASP. If you still have the 8 or 8.0.1 installed,
    then you may be able to upgrade to 8.0.2 then inspect your
    recordsets and have them update to the "new" recordset code. You
    can check your version by going to Help -> About Dreamweaver. If
    you click on the about screen once (or wait until the scrolling
    credits stop) you should see the version number. You can get the
    updater here:
    http://www.adobe.com/support/dreamweaver/downloads_updaters.html
    If this is not the fix for you, then it may be that the code
    in the recordsets aren't being recognized for some reason, and you
    may need to post the code for your recordsets (and perhaps other
    code from the page) so that someone can look through the code to
    see what might be the issue.
    Danilo Celic
    |
    http://blog.extensioneering.com/
    | WebAssist Extensioneer
    | Adobe Community Expert

  • Content Search Webpart is not displaying certain fields from my results

    I am rolling up some list data from a subsite to its parent site. The list includes the Title and Health fields. The Health field is an image column. When typing in "Health" into the second line to display for the webpart, it doesnt show anything
    when I save and refresh. The Title field works, however. Another field "Created" also works but I don't need to display that column in the webpart.
    Any ideas how I can fix this?

    Hi,
    Please change the mapping of managed properties for the fields in
    the Item Display Template.
    Displaying the right data in the Content Search web part in SharePoint 2013
    http://www.sharepointnutsandbolts.com/2013/03/displaying-right-data-in-content-search.htmlWe
    can also customize a Display template for content search web part to achieve
    special requirement.
    http://www.myphotoadventures.nl/2014/05/21/sharepoint-2013-custom-display-template-for-content-by-search-web-part/
    Best Regards
    Dennis Guo
    TechNet Community Support

  • WMIC Output not displaying all fields

    I am running some audits to get hostname, ip and macaddress for a large number of machines.  My plan is to run these commands  and typing out the file. the problem lies in the second command is not getting inputted into the file and I am not sure
    why.
    wmic computersystem get name
    wmic nic where netenabled=true get netconnectionID 
    wmic /output:C:\RDFD\wmictest.csv nicconfig where IPEnabled=True get ipaddress, macaddress /format:csv
    My output looks like this, data is there I have removed personal info. 
    Node,IPAddress,MACAddress
    hostname,{IPV4;IPV6},MACaddress
    So my question is why is the netconnectionID not getting inputted into the file?  Running the command by itself yields a good result. As a secondary question, is it possible to remove the header from the file? Right now I am for lopping it with this
    as there is a blank line before the header too.
    for /F "Skip=2 tokens=*" %a in ('Type c:\wmictest.csv') do @echo %a

    Hi Rougeherring,
     >>We hope to get hostname, interface name, macaddress into a nice comsumable format.
    If you want to achieve above with cmd, I think it's difficult, because  netconnectionID and macaddress are from different commands. If we need to combine all the results to one csv file we need to use append. however, the
    properties from different commands are different, so the header of the output is broken.
    I think using command is hard to keep the nice format.
    Conversely,When using Get-WmiObject in Windows Powershell to connect to a remote computer, The remote system does not need to have Windows PowerShell installed. This allows you to administer operating systems that are not running Windows PowerShell,
    but do have WMI available.
    $nic = Get-WmiObject Win32_NetworkAdapterConfiguration -ComputerName "remotecomputername" -Filter IPEnabled=TRUE| Foreach-Object{
    $nac = @($_.GetRelated('Win32_NetworkAdapter'))[0]
    New-Object PSObject -Property @{
    Node = $_.PSComputerName
    MACaddress = $nac.MACAddress
    IPAddress = ($_.IPAddress -join ', ')
    NetconnectionID = $nac.NetconnectionID
    $nic|Export-Csv d:\test1\wmi.csv -NoTypeInformation
    Best Regards,
    Anna Wang
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • IPhone 5 not displaying most current emails

    I have 2 Comcast email accounts on my iPhone 5 - work and personal. Personal acct is fine. Work acct only showing emails from July 5th or earlier. Deleted that account and reinstalled, but same problem. Driving me nuts - need my emails while on the road!  Suggestions??Thanks!

    They said it was an issue with Apple since I have no problems viewing current mail on that account from my laptop.  It was fine up until Saturday - was receiving and sending mail from my phone on that account. Now, it won't load/display anything after July 5th.

  • JTable column header is not displaying

    Here I have the sample code which is not displaying the header names of each row (Names, Size, Status).
    import javax.swing.*;
    import javax.swing.table.*;
    import java.awt.*;
    public class sample extends JFrame
        JTable table;
        String names[] = {"Names","Size","Status"};
        TableModel model = new AbstractTableModel()
            public Object getValueAt(int row, int col)
                return "Data";
            public int getColumnCount()
                return 3;
            public int getRowCount()
                return 5;
            public String getColumnName(int col)
                return names[col];
        public sample()
            setSize(400,400);
            setDefaultCloseOperation(3);
            Container cp = getContentPane();
            table = new JTable(model);
            cp.add(table);
            setVisible(true);
        public static void main(String a[])
            new sample();
    }Anybody can give idea for me.

    Read the JTable API. It shows you how to do this. In addition it has a link to the tutorial on "How to Use Tables" which contains many examples.

Maybe you are looking for