PSCD Correspondence FPCOPARA - Entries 0000000 found
Hi PSCD Folks,
We are trying to generate and print 'Account Statements' using standard correspondence events (702 and 703) but after entering parameters in transaction FPCOPARA when I try to save; I receive message "Entries 000000 found Do you still want to save". If I save and execute the run program doesn't throws any error but I don't get any data in spool...Which means no correspondence was picked for printing?
Conifiguration:
Correspondecne Type and Variants are in place
Business Partner and Contract Accounts have Correspondecn type assigned.
Form are assigned (in FICA correspondence and in Cross- Application Componenets)
Data is present in Table DFKKCOH and entries have correspondence keys asscoaited.
Can anyone PLEASE guide me what is wrong or if there is an OSS note (I didn't find any)???
I am functional so ABAPers please advise in layman terms !!
Appreciation + Points for HELP
Thanks a lot,
Sid
Hi Sid,
The message that you are getting is because the number of entries that is being returned by the FM
FKK_CORR_DFKKCOH_NUMBER_GET, which is triggerred during the save event of FPCOPARA is either 0 or greater than 1000.
I think that the data in table DFKKCOH is not meeting certain conditions and that's why its not getting picked by the FM FKK_CORR_DFKKCOH_NUMBER_GET.
I would recommend you to place a debugger in the FM and then run FPCOPARA and try to find out the reason for no entries being picked up.
Hope it helps,.
Thanks,
Amlan
Similar Messages
-
Correspondence type entries!
Hello folks,
As we know that NAST table contains the output type entries, what is the table which stores correspondence type entries in FI?
Thanks,Hello all,
I found it. It is BKORM table for FI correspondence types.
Thanks, -
Entries not found in table BSIS for a particular G/L Account
Hi,
When I display a Document through FB03 Eg. '3062000670', I can see that two G/L are being hit
3000 1 40 5700700 LHW 2,464,177.00
3000 2 50 1990990 GL-Initial BalUpload 2,464,177.00-
When I goto to the table BSIS to Display the lineitems of the G/L '5700700' , no entries are found.
I have to write a report based on the G/L Account .
Please help.
Salman ZahirThanks for your quick answer,
I have checked the table BSAS as well, it also has no entries corresponding the above G/Laccount.
I can find the entries in BSEG for that G/L, but since it does not have the G/L account as primary key
my program will take very long processing time as the user will give range of G/L accounts.
When I Check the Report FS10N with the same G/L account, and double click to see the lineitems
it also gives me the message 'no line items found' eventhough it shows some amount in the first screen.
Salman Zahir -
In Transaction code OOSB entries not found
Hi!
I have been suffer from problem that, in T. code OOSB when i check the entries, then the user name SAP*, Auth. profile ALL, start data and end date maintained, but when i click on Display Objects then the no entries is found. How maintain the entries.
So i solve this problem ,please suggest me
thanks
ganeshNormally this is something you would want to deactivate, and by the sound of it this is also the case.
If removing all entries is too much for you, just maintain what you want to keep as a minimum access for all those who do not have any other structural authorizations (in which case they have SAP*'s access...).
Cheers,
Julius -
Hi guys,
I installed webloigic 12.1.1 on windows 2003(32-bit);
I was requested add SSL Configuration to console;
I'm using keytool; It is not first time I setup SSL on weblogic console, only version is different;
before I did susssessfully on weblogic 11g(10.3.2-10.3.5) using the same scenario;
My steps:
1.generate key;
keytool -keyalg RSA -genkey -v -alias <server_name> -keysize 2048 -storepass <pwd> -validity 762 -keystore <name>.jks
2. create cert
keytool -certreq -alias <server_name> -file file_name.csr -keystore <name>.jks
after send and return certificate 3 layers;
imported back;
--root--
keytool -importcert -v -noprompt -alias rootca.kbr.com -file root0.cer -keystore <name>.jks -trustcacerts
Enter keystore password:
Certificate was added to keystore
[Storing <name>.jks]
keytool -importcert -v -noprompt -alias rootca1.kbr.com -file root1.cer -keystore <name>.jks -trustcacerts
Enter keystore password:
Certificate was added to keystore
[Storing <name>.jks]
keytool -importcert -v -noprompt -alias <server_name> -file root2.cer -keystore <name>.jks -trustcacerts
Enter keystore password:
Certificate reply was installed in keystore
[Storing <name>.jks]
confufigured weblogic using conosole;
it looks like this in config.xml file
<ssl>
<enabled>true</enabled>
<listen-port>7002</listen-port>
<server-private-key-alias><server_name></server-private-key-alias>
<server-private-key-pass-phrase-encrypted>{AES}TIRM5RT26K8IZDevCNMexlWp3BuhZaFpi8HEgPaOCrU=</server-private-key-pass-phrase-encrypted>
</ssl>
<listen-address>34.64.3.9</listen-address>
<key-stores>CustomIdentityAndCustomTrust</key-stores>
<custom-identity-key-store-file-name>path<name>.jks</custom-identity-key-store-file-name>
<custom-identity-key-store-type>JKS</custom-identity-key-store-type>
<custom-identity-key-store-pass-phrase-encrypted>{AES}hiemEGOTrjIRvEOnn0+ODuNpWehBbrgb8fydImfyXV4=</custom-identity-key-store-pass-phrase-encrypted>
<custom-trust-key-store-file-name>path<name>.jks</custom-trust-key-store-file-name>
<custom-trust-key-store-type>JKS</custom-trust-key-store-type>
<custom-trust-key-store-pass-phrase-encrypted>{AES}xzP2kU98nkVMNLdzMv7VRoRjoBQUTu5jjtlMLm87PHc=</custom-trust-key-store-pass-phrase-encrypted>
</server>
When I restart SSL , I see error in log file
Er<AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <> <> <1381506732875>
<BEA-000297> <Inconsistent security configuration, weblogic.management.configuration.ConfigurationException: No identity key/certificate entry was found under alias <SERVER_NAME> in keystore path<name>.jks on server AdminServer>
Please help
I thought before if import certification get status Certificate reply was installed in keystore
it shouldn't be problem for weblogic use thsi certificate;Compare your steps with the following
http://weblogic-wonders.com/weblogic/2011/05/25/ssl-configuration-for-weblogic-server/ -
No identity key/certificate entry was found under alias test keystore
I created a keystore using the command
keytool -genkey -alias test-keystore c:\TestKeyStore\test1
Then imported certificates which i downloaded from the targets website
keytool -import -alias itestcomodo -keystore c:\TestKeyStore\test1.jks -trustcacerts -file (.cer file name)
keytool -import -alias TestEXternalCARoot -keystore c:\TestKeyStore\test1.jks -trustcacerts -file (.cer file name)
keytool -import -alias TestPrimaryIntermediate -keystore c:\TestKeyStore\test1.jks -trustcacerts -file (.cer file name)
keytool -import -alias TestSecondaryIntermediate -keystore c:\TestKeyStore\test1.jks -trustcacerts -file (.cer file name)
Then I added the certificates to the java cacert file and to oracle weblogic cacaert file
C:\oracle\Middleware\wlserver_10.3\server\lib\cacerts
I setup under weblogic admin console
Keystore type as Custome identity and Java Standard keystore and included test1.jks with the passphrase.
Similarly I configured the ssl tab but I am geting the following alert on weblogic console
<Jan 25, 2012 1:12:43 PM EST> <Notice> <Security> <BEA-090171> <Loading the iden
tity certificate and private key stored under the alias test from the JKS
keystore file c:\TestKeyStore\test1.jks
<Jan 25, 2012 1:12:43 PM EST> <Alert> <Security> <BEA-090168> <No identity key/c
ertificate entry was found under alias test in keystore c:\TestKeyStore\test1.jks
After this going down i get SSL Handshake error saying The security certificate recieved from (the target website) was not
signed properly.
Please help.
Thanks,you can learn few basics from below link :
http://www.weblogic-tips.com/2008/07/27/how-to-configure-self-sign-certificate-on-weblogic-server/
http://www.weblogic-tips.com/2008/07/27/configuring-commercial-certificates-on-weblogic-server/
http://www.weblogic-tips.com/2008/07/27/steps-to-create-self-sign-certificates-for-weblogic-server/
In simple words , I would say that Private key and Public key exist in pair . Private key in case of weblogic server is used for encrypting the data and public key is used for decrypting the data which is a mandatory step in SSL handshake .
You can learn process of Handshake for below link which is very important to learn SSL .
http://www.weblogic-tips.com/2010/05/20/two-way-ssl-on-weblogic-server/
Thanks,
Sandeep
Edited by: sandeep_singh on Jan 26, 2012 10:04 PM -
Cache entry not found error message in java console 1.6.0_05 - Citrix ICA
Client information:_
Windows XP_SP2
Java Runtime version 1.6.0_05
Application: Citrix ICA version 9.4.1868
Slow citrix ICA client connection, repeated errors in the java console stating "cache entry not found". However when I downgrade to Java Runtime version 1.5.0_10 I do not see the "cache entry not found" errors and the Citrix ICA connection is much faster. Basically launches and connects in 10 seconds versus 2 minutes.
Any ideas? Thanks!Hi,
All your classes must be accessible through the web. The easiest solution is to put all your classes in the same folder as your web page.
If your classes are in a different folder (which must be mapped as a virtual directory), try adding the codebase attribute to your applet.
Regards,
Kurt. -
Entry not found in database buffer - notif_create
Experts
Hopefully you can help me here because I can't find what the problem is. I created my organization structure and the business partners, there is a rule that assigns the support team based on the subject and that works perfectly great but as soon as I specified the country to the support team in transaction BP the transaction notif_create sends this error when I try to save the support notification: "Entry not found in database buffer". Message no. COM_PARTNER109
Any help would be appreciate itHi,
Please kindly verify if these notes maybe helpful;
1048685 Contract determination does not work correctly
926540 Missing Organisational units
864281 Support Desk message contains errors
Hope this helps.
Cheers
SH -
Hi all,
User is getting above error while trying to submit the expenses on ESS.
"The estimated travel amounts could not be determined."
"Entry not found in T706p"
Can anybody help urgently.
Thanks
DeepaliYes it is maintained.
This is what i get in that table. Not sure what it means.
J 06.04.2010 05.04.2011 2011
thanks
Deepali -
Entry not found in object buffer error in leasing quotation
i am getting following error in SAP CRM 7.0 in quotation level.
when i am entering financing product in quotation.
Item 200 Entry not found in object buffer @5F\QNo long text exists@ Dates Administrator
Item 200 Entry not found in object buffer @5F\QNo long text exists@ Administratorthank for your reply
At least we found out message class of this message.
From your given Function module we could identify that it giving information message, but we are experiencing error of object buffer related message.
In error it showing sub object as "Dates", can you please guide us to elaborate this further.
Regards,
Vikil -
Entry not found in object buffer
Hi,
When we create service desk message we are getting Entry not found in object buffer error error. Can you please help me out to resolve this issue.
ThanksHello again,
Is it a customized support message (e.g. ZLFN for instance) or the standard one ? If customer message, check your action profile... You need to have a copy from the standard action SLFN0001_ADVANCED_UPDATE_DNO.
Hope it helps.
BR.
Stéphane. -
Entry not found in Table T706V
Hi,
When I simulate a trip I get error message "Entry not found in Table T706V Argument JSP IN 0022420080901 is missing".
Where JS is Trip provision copied from 40 Trip Provision. I am not undersatnding what is 00224.
When I try this in IDES , it works with 40 Trip Provision Variant.The same config gives error in other system with trip provision variant JS.
Rgds
PVThe problem was solved by changing expert control view in Travel.
PV -
No Dimension Server entry was found in the EPM registry
I have installed 11.1.2.3 on Linux 64bit.
I can log into the EPMA workspace but not able to open the calculation manager. And when I try to open it I get this error:
No Dimension Server entry was found in the EPM registry.
Please ADVISE. Thanks.Avishek wrote:
I have installed 11.1.2.3 on Linux 64bit.
I can log into the EPMA workspace but not able to open the calculation manager. And when I try to open it I get this error:
No Dimension Server entry was found in the EPM registry.
Please ADVISE. Thanks.
Have we not been here before and you asked similar questions?
https://forums.oracle.com/thread/2482930
https://forums.oracle.com/thread/2473594
Cheers
John
http://john-goodwin.blogspot.com/ -
Notification print Error message :- No entries were found in the Cataloge T
HI All ,
when printing the notification throgh the transaction ISQ2 , I have released the Notification as well the task , even i have tested to complite status also , but when i am going to Pint the notification i am getting the error message like no entries were found in the cataloge T.
Is there any custunization missing or the possibility of autherisation issue , i have checked the cataloge & assignmnet also in cust , it is proper ,
Regards
piyushresolved throgh debugging , the short text & long text is not maintain for the Catalouge.
-
Hello everyone,
After I have finished with Lync FE, Monitoring and Archiving, and WAC server I was going well with Edge server until I got to the point of publishing the topology with Edge Server.
First time publishing went well but I wanted to place the configured IP addresses in the Edge server IP topology with a different IPs and when I published i got the below error.
I tried looking in the trusted Services in Configuration OU using ADSI Edit but never was able to figure out how do I find the duplicated entries? I used also used Softerra LDAP adminsitrator and was able to find 5 values but not sure which one to delete
among them.
Could anyone advise where to look? I'm posting the error as well below
Error: Multiple Active Directory entries were found for type "ms-RTC-SIP-EdgeProxy" with ID "egelyncedge.domain.local".
▼ Details
└ Type: InvalidDataException
└ ▼ Stack Trace
└
at Microsoft.Rtc.Management.Deployment.AD.ADSessionExtension.FindUnique[TResult](ADSession session, QueryScope scope, ADObjectId containerId, QueryFilter filter, String name, Boolean throwOnMissing)
at Microsoft.Rtc.Management.Deployment.Core.CompatEdgeProxy.Remove(ADSession session, String edgeProxyFqdn)
at Microsoft.Rtc.Management.Deployment.Roles.AccessEdge.GlobalDeactivate(IService service)
at Microsoft.Rtc.Management.Internal.Utilities.LogWriter.InvokeAndLog[T](Action`1 action, T arg)
2/19/2014 12:25:28 PM
Error
└
Error: An error occurred: "System.IO.InvalidDataException" "Multiple Active Directory entries were found for type "ms-RTC-SIP-EdgeProxy" with ID "egelyncedge.domain.local"."
Mohammed JHHi,
Glad to hear you have solved the issue and shared the train of thought.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support
Maybe you are looking for
-
[Mac] Could not complete your request because of a program error.
Hello, I've got the problem with opening the file. It was saved in Photoshop CS 6, everything was ok, but after opening the file in few seconds here the message "Could not complete your request because of a program error." What should I do?? It was m
-
Download PDF file from APP server!
Hi! Has anyone tried uplaoding and downloding a PDF table from app server as I tried from a normal method by Open dataset, Transfer but it wont work. Please provide any inputs. Thanks.
-
F.01 Balance Sheet-Report to see in company code wise
Hi Experts Goodevening We are recently upgraded to ECC.6 version of SAP. The issue is, when we use Tcode F.01 relating to Balance Sheet Report it is giving the result in Business Area Wise of all the assets and liabilities. Is there any possiblility
-
What is the easyiest way to merge 2 Hashmaps into 1? So Say h1, h2 and hashmaps with data in, h3 is a empty hashmap that i want to contain all the values of h1 and h2. Only way I know how is to loop through each Hashmap and add the value pairs to the
-
Installing Oracle Apps 11.5.5: rapidwiz problem
Hi, I am trying to install Oracle Applications 11.5.5 on Linux Red Hat 7.1. I know this is not supported but my client wants 11.5.5 and the only Red Hat O/S it is certified to run on is 7.1 I have the following problem: rapidwiz calls runWizard.sh, w