PSE 6 will not connect to internet even after reinstall

PSE 6 will not connect to internet even after reinstall

Hi,
Help at this link for ...
Troubleshooting Wi Fi Networks & Connections
Carolyn  

Similar Messages

  • Original Ipad 1 will not connect to internet even though there is a strong signal displayed

    Hi My iPad 1 was working fine but suddenly it will not connect to the internet, it shows a full wifi signal and I have tried reseting but it keeps failing to connect with the internet,,does this indicate a fault with the iPad, router or software. My Sony laptop works from the same BT router using wifi and has no problems.
    Has anyone had similar connection issues, I am reluctant to send it to Apple in case its not a fault with the iPad so want to check all other options first..

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Occationally my iphone 5 will not connect to internet even though the Wi-Fi connection shows as connected.

    I have a iphone 5 iOS 8.2 and occasionally it will not connect to the internet, even though the Wi-Fi show as connected.  If I reboot the phone it will work properly.   Any idea how to fix this?

    Hello armygolfer61,
    Thank you for using Apple Support Communities. 
    You can use the following article to troubleshoot your iPhone Wi-Fi connection:
    iOS: Connecting to Wi-Fi - Apple Support
    Cheers,
    Jeff D. 

  • Unable to validate my serial number for purchased version of premiere elements will not connect to internet even though my connection is ok

    i have purchased an official copy of premier elements 13. i have my serial number etc but when i go validate my sign in throgh my internet connection nothing happens. its a nightmare !! I cannot even find out how to generate a rerquest code for offline valiodation. clicking on "generate response code " does nothing. I have jjust spent £79 on this product. will someone please help. ther is nothing wrong with my internet connection.

    Hi, A.T.R
    Thank you so much for your common sense reply. I contacted Adobe via their online chat help facility. One of their tech guys resolved the issue by re-setting the Hosts file. Now I have seen this in the forums and it basically involves making a back-up copy of the Hosts file deleting certain entries and applying again.. Thankfully this worked for me. But I would urge Adobe to look into this matter as there are many novices I am sure will be extremely frustrated at what should be a straight forward approach when validating their software. Most people would know there internet was working ok and most people would be able to disable anti-virus software etc, but to continue getting a failure to validate a serial number online would in my opinion beggar belief !! for most technically minded folks out there. Most annoying.
    When anyone purchases legacy software from Adobe, no one wants this kind of problem. The software is not cheap.
    My purchase was Adobe Premiere Elements 13 and it is a great piece of software for video editing. I can however recommend it. It is very good for both novice and professionals
    Thank you.

  • My laptop compaq presario will not connect to the Internet anymore after buying airport extreme. Why? It detects the network, accepts my password, but will not connect to Internet.

    My laptop compaq presario will not connect to the Internet anymore after buying airport extreme. Why? It detects the network, accepts my password, but will not connect to Internet. I tried to repair connection, tried to reboot modem several times, I even updated my computer. Nothing. All it says is that it does not detect modem. Why?

    Welcome to the support community group.
    First, are you sure that your AirPort Extreme has been configured correctly and is properly connected to your modem?
    Begin by telling us how you have things connected and if the Airport Extreme is replacing a previously owned router or is this an entirely new installation?
    First be sure that your modem is working and properly connects you to the internet using an ethernet cable directly connected to your laptop.  Once you're sure that's working, reset the AirPort to factory defaults by disconnecting it from power and pressing and holding in the small reset button on the back  for 15 - 20 seconds while you reconnect it to power.  Then turn everything off for 5 minutes. Connect the Airport to your modem with and ethernet cable to the Airport WAN port on the back (check the user guide to make sure you connect the cable to the correct port) then connect a second ethernet cable between the laptop and one of the LAN ports on the AirPort Extreme.
    Then power up the modem first, wait 5 minutes and then power up the Airport, wait 5 minutes and finally power up your laptop.
    Then run the airport configuration utility from your laptop.  Since you're not using an Apple computer, be sure that all of your firewall, and virus blocking and checking software is disabled before you run the airport configuration utility.  Once you run the utility, it should detect your AirPort and allow you to use the configuration wizard to set things up.
    Check back if you're still having problems.

  • Firefox will not connect to internet after upgrade. The window pops up but shows "connecting " in tab. And then it sit there. Close it down and then try to reopen it and get message " Firefox already running, Exit program or shut down computer" ???

    Firefox will not connect to internet after upgrade. The window pops up but shows "connecting " in tab. And then it sit there. Close it down and then try to reopen it and get message " Firefox already running, Exit program or shut down computer" ?????????????????

    1st problem see http://kb.mozillazine.org/Firewalls
    2nd problem, to close Firefox properly use File > Exit
    :not with the [x] in upper right corner which close window
    :see http://kb.mozillazine.org/Firefox_hangs#Hang_at_exit
    :if restarting use "Restartless Restart" extension as mentioned there.
    <br><small>Please mark "Solved" one answer that will best help others with a similar problem -- hope this was it.</small>

  • TS1398 My ipad says it is connected to WiFi, which is workingly perfectly for several other devices, will not connect to internet.  It keeps giving the message 'Cannot Connect' or error has occurred or just blink off site or icon?

    My ipad says it is connected to WiFi, which is workingly perfectly for several other devices, will not connect to internet.  It keeps giving the message 'Cannot Connect' or error has occurred or just blink off site or icon?

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Green light on Airport Extreme but will not connect to internet

    I have tried restarting computer and Airport Extreme but it will not connect to internet.  Unit has been working great up until now.  I have made no changes in system.
    This Airport/time machine is 2009 version.

    The Cisco DPC 3010 is a cable modem, so you will need to let the modem completely reset before you connect it to the AirPort Extreme.
    It may be necessary to perform a Factory Default Reset on the AirPort Extreme and reconfigure it, but we will try a shortcut first to see if that can be avoided.
    Power off the entire network.....all devices....modem, AirPort, computers, mobile devices, etc in any order that you want.
    Be sure to disconnect the power cable on the modem, either on the back of the device or pull the power cord from the wall AC jack
    Leave everything powered off for at least 30 minutes.  Longer is better, as it sometimes takes the equipment back at the ISP longer to completely reset and issue a new fresh IP address to the modem.
    After the wait period, power up the modem first, and let it run for at least 5 minutes by itself. If your modem documentation states that the modem should be powered up for 15 minutes, then go with 15.
    Power up the AirPort Extreme next, and let it run a few minutes
    Then power up other devices one at a time about a minute apart
    When the entire network is back up, check the network.
    It this does not work, you will have to start over again as above, except this time you will need to perform a Factory Default Reset on the AirPort Extreme.
    To do that, power off the AirPort Exterme for a few minutes
    Hold in the reset button on the back of the Extreme.....and keep holding it in for an additional 9-10 seconds while you simultaneously plug the power back into the Extreme
    Release the reset button after the hold period, and allow a full minute for the Extreme to restart to a slow, blinking amber light
    Power off the AirPort now, and start it back up in the proper sequence
    If things still don't work, then you likely have a defective AirPort Extreme that will need to be replaced.

  • All of a sudden my iTunes 10.1.1.4 will not connect to internet radio

    Hi all,
    All of a sudden yesterday, my iTunes 10.1.1.4 will not connect to internet radio. It has otherwise been working fine for almost two years.
    My internet connection is working fine for web browsing and email.
    I ran the iTunes diagnositcs and it showed me how to go in to the Windows Firewall settings to check to see if there was a connection... there was already one for iTunes in the list of accepted connections. Just to be sure, I created a new iTunes connection exception and it didn't help.
    The iTunes diagnostics test shows all information as being normal except this info, pasted in below, about the Firewall test...
    Firewall Information
    Windows Firewall is on.
    iTunes is NOT enabled in Windows Firewall.
    Connection attempt to Apple web site was successful.
    Connection attempt to browsing iTunes Store was successful.
    Connection attempt to purchasing from iTunes Store was successful.
    Connection attempt to iPhone activation server was successful.
    Connection attempt to firmware update server was unsuccessful.
    The network connection timed out.
    But this information is partially incorrect, according to the Windows Firewall settings themselves.  My Windows Firewall settings show that iTunes is indeed enabled in Windows Firewall.
    I can access the iTunes store, but there doesn't seem to be any test in the iTunes diagnostics that makes it test to see if it is connecting to the iTunes internet radio server.
    Is there possibley a current problem happening with the iTunes internet radio connection?
    Thanks for any suggestions.
    numetro

    Hi movem,
    Are you saying that Apple has changed the URL for every internet radio station in the entire iTunes radio station library?... or are you suggesting that just some of the internet radio stations in my playlist changed their own URLs?
    It seems unlikely that it happens to be that every single internet radio station in my playlist of a hundred radio stations all happened to change thier URLs at the same time, since all of the stations in my playlist will not play from that playlist.
    When I went through and found some of the radio stations in the giant default internet radio station library in iTunes, I found some of my old ones that were in my playlist and they play fine and they can be put in to a new playlist and they play fine there too, but the very same stations still will not play from my old original playlist.
    So it makes sense if you are saying that Apple has somehow changes all the URLs for all the radio stations in iTunes, because that make sense since they all play from the main radio library.
    But, otherwise, to say that all the radio stations in my playlist happened to change their own URLs at the same time, that would be a bit far fetched.
    Did you get some news from Apple that this happened, one way or the other?
    PS: I'm having a hard time finding a few of the stations that were in my previous, original playlist as well... some of them have either disappeared, changed categories, gone off the air or changed their names.
    Thanks,
    numetro

  • MBP upgraded to Yosemite and now will not connect to Internet using a Cisco router

    I Upgraded my MBP mid 2010 to Yosemite and now it will not connect to Internet using a system that involves typing in my user name and password in an auto pop up window provided by Cisco security systems. Before, using Mavericks, it worked perfectly: boot up MBP and the Cisco pop up auto loaded. Typed it my password and hey presto, connected to Internet. Now, zilch. There is nothing wrong with the Cisco cos my iPad connects ok, as do both my iPhone's.
    the problem is with Yosemite therefore. Please help. I tried all the usual diags, etc to no avail.
    Message was edited by: AWAC

    Sounds like there could be some kind of compatibility issue between ICS and this Bluetooth device of yours. Is there any compatibility info from the manufacturer about which Android versions that's being supported?
     - Community Manager Sony Xperia Support Forum
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • Photoshop CS6 will not open raw files even after I downloaded a DNG converter help please!

    Photoshop CS6 will not open raw files even after I downloaded a DNG converter help please!

    We are pleased to announce the Adobe Camera Raw 8.7 RC is now live on Labs! See the links below.
    Technology pages:
    CC - http://labs.adobe.com/technologies/cameraraw8-7-cc/
    CS6 - http://labs.adobe.com/technologies/cameraraw8-7/
    Download pages:
    CC - http://labs.adobe.com/downloads/cameraraw8-7-cc.html
    CS6 - http://labs.adobe.com/downloads/cameraraw8-7.html

  • Problem with In Design CS6 Unexpected Quit and will not re start up, even after computer restart?

    In Design CS6 Quit Unexpectedly and will not start back up, even after restarting computer.  Tried to do a CS6 re-install. It finished and said ready to use, but still getting same Unexpected Quit and In Design will not work.  Did not "Un-install CS6 first" Should I try installing CS6 again, un-installing version on computer first?

    Hi Ivesprepress,
    You might also try resetting your user preferences
    You can delete the replaceable InDesign SaveData and InDesign Defaults files by holding down the following keys while InDesign is launching:
    Windows: Shift+Ctrl+Alt
    Mac OS: Shift+Control+Option+Command
    Taken from: InDesign preferences and support file locations
    - Dave

  • Adobe digital editions will not finish downloading ebook  even after double clicking on hard drive .

    ADE will not download and open the ebook automatially. After locating the .ascm (ebook) file on the hard drive and double clicking on that, it still will not open in ADE.

    I did all that and after I close the ADE and double click on the file, ADE opens right up and it looks like it is downloading (very fast), but nothing shows up in the ADE.
    How do I only get emails from you and not all the other people on the discussion?
    Date: Fri, 23 Dec 2011 15:48:24 -0700
    From: [email protected]
    To: [email protected]
    Subject: Adobe digital editions will not finish downloading ebook  even after double clicking on hard drive .
        Re: Adobe digital editions will not finish downloading ebook  even after double clicking on hard drive .
        created by Jeff A Wright in Adobe Digital Editions - View the full discussion
    Right click on the ACSM file or option click and go to Open With and select Other.  You can then navigate to your Adobe Digital Editions and set the file to open with that. I would then recommend closing Digital Editions, if you have it open, and try double clicking the file.  If Adobe Digital Editions opens then the file association is still correct.  If you continue to have difficulties then I would recommend contacting the vendor you obtained the e-book from.
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4101791#4101791
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4101791#4101791. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Adobe Digital Editions by email or at Adobe Forums
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Having problem with primary sever will not connect, my internet connection is working

    Having problem with primary sever will not connect, my internet connection is working

    Hello pp585,
    Thank you for using Apple Support Communities.
    For more information, take a look at:
    Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    Troubleshoot issues on a Mac
    If you haven't been able to connect to the iTunes Store, a software conflict or your Internet service provider (ISP) may be blocking your access.
    Update iTunes and Safari to the latest version.
    If you have a firewall, your settings may be preventing you from connecting to the iTunes Store. Follow these steps to configure your firewall.
    You may need to reset your keychain. Connection issues are occasionally caused by keychain issues. Learn how to use Keychain First Aid to resolve any issues with your keychain.
    If you're receiving a specific error message, follow these steps.
    If the issue still persists, contact your Internet service provider and confirm that these ports and servers are enabled over your network.
    Have a nice day,
    Mario

  • Airport shows being connected but will not connect to internet

    Airport will not connect to internet yet shows me as connected. 
    When and if I do get connected, I will loose the connection and unable to access the internet.
    This has happened using several different wireless locations.
    Please help as to what my settings should be or how to correct the problem

    What debugging steps have you taken?
    Connecting to your wireless network and connecting to the Internet are two different parts of the connection process.
    If you open your Network preferences panel does it show you have an IP address of the form 169.x.x.x?

Maybe you are looking for

  • How do I make itunes blind to my ipod?

    so,...I have this fifth gen 30 gig ipod that I took to my local apple store where they determined that the reason why I could never get itunes to read its mp3 contents was a hardware problem. They said that they are gonna send me a replacement. So no

  • Error while pushing idocs from SAP to XI

    Dear All, For doing ALE configurations for pushing IDOC's from SAP to XI, I am following the following blog posted on SDN: /people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi I am able to create the  model v

  • Embed a font in a PDF(generated by Word 2013) using Adobe Acrobat XI

    Hi all, I wrote my thesis in Word 2013 using the LaTex font "LM Roman 12" that is an Open Type font not restricted (it results "Editable"). Although it is marked as opentype, word doesn't embed it into the exported pdf and I guess that is becouse the

  • Problem with Order PP orders

    hi all Das anybody knows some Fuba ( Call funktion) for PP-Orders . I have to design an interface for Netplans. Thanks for your help chris

  • Flash Player 9 crashes my browser when I open advance settings

    Hi, I'm using the newest version of Flash (9,0,115,0) and when I try to access the advanced settings and click the webcam tab, both my browsers crash (IE and Firefox2). The screen I am talking about is: http://www.macromedia.com/support/documentation