PSE10 Organizer Window Startup Control

When I open the organizer, I like to use the Folder Location Display option. But no matter how I get the window located the previous time I had PSE 10 open, the Folders window increases in horizontal size to cover 40% of my screen. The contents folder narrows. I like the properties window to be on the bottom right and, while it stays open on rebooting, only the least amount of it shows.
This used to hold in all previous versions of PSE. It really is annoying that it doesn't now.
Can someone help?
Thanks, Kirk Sorensen

For the Properties pane, you need to click on the "Docking" icon to dock or undock the pane to the right-hand panel:
Then, a single click on the vertical separator bar will hide or show the entire panel.
KirkDebS wrote:
The need on the left side where the folder list window gets 3 times the size of the longest file name is still out there for help.
When I drag the separator bar for the folder panel, the size of that panel persists between sessions. This is with PSE10 on Win7 x64. I'm running Organizer as a window (not maximized) and start Organizer from its own icon, bypassing the Unwelcome Screen.
Ken

Similar Messages

Boot Camp Partition no longer shows in StartUp Control Panel

My Boot Camp partition no longer shows in StartUp Control Panel, but does show up using Option Key at startup. This started soon after the latest Parallels update. The Boot Camp partition seems normal and healthy in the finder. Once started via the Option Key, Windows XP-SP3 runs fine. Upgrading to BC 3.0 did not have any affect.
I've tried LOTS of troubleshooting strategies, including completely deinstalling Parallels. Deleting obvious preferences, etc.. No joy.
Any suggestions?

Hi,
if I remember correctly Parallels installs some kind of file system driver to OSX to access NTFS files system partitions.
The 'case of the missing Windows partition' is widely spread when using these NTFS file system drivers in OSX.
(Others are NTFS-3G; Paragons NTFS for Mac and Tuxera NTFS for Mac).
To my knowledge there is no other remedy to this phenomenon then to deinstall the NTFS drivers.
But as long as the Option-key is working maybe you can live with it.
Or use rEFIt http://refit.sourceforge.net/ as a Boot-Menu.
Regards
Stefan

How to disable iCloud on Windows startup

Hello,
I want to disable iCloud on Windows startup. How do I do that?
I already tried these steps:
1. msconfig > uncheck the service
2. CCleaner > uncheck the service
Unfortunately it enables it itself again, everytime.
Google couldn't help me with this issue.
Thanks in advance!
Fred

Use iCloud control panel version 2.1.2 from here: http://support.apple.com/kb/DL1687.

NO java control panel in windows system control window

Hello together,
there seems to be a bug/feature (?) not allowing me to use the plugin functionality of my J2EEsdk-1_4
Situation:
Before i installed the J2EE i had an already installed java plug-in 1_4_2 working fine on
my Laptop giving my ms explorer 6.0 the Java VM needed. To avoid conflicts, i deinstalled
this plug-in, before i installed the J2EE 1_4_2. The result was disapointing.
There was NO java control panel in the windows2000 system control window after installing J2EE.
There was no corresponding registration key in the registry anymore.
Additionally there was no java related entrance to be seen anymore in the advanced internet and
security options of my ms explorer 6.0.
i have have found several trouble reports mentioned similar problems during the last months but unluckily
no solution working for me.
i did several tests with different java packages i downloaded today to get the actual versions
First:
i deinstalled the J2EE (not to get version conflicts) and installed the Java Plug-in 1.4.2 again.
This was proposed from ms explorer, when i tried to open an internet page with javaplugins included.
This plugin worked fine again. I could see and use the java panel and it enabled
my explorer to use the java plugin.
Second:
i deinstalled the Java Plugin and installed the J2sdk_1_4_2 instead.
The java plugin which is part of this package also worked fine.
Third:
i deinstalled the J2sdk_1_4_2 and installed the J2EEsdk-1_4-windows.exe.
the same misbehaviour as mentioned before. No java panel icon can be seen
in the windows system control, now registration......
as a workaround i have installed now both, the J2eesdk (i want to learn about)
and some additonal 100 MB java plug-in to enable my MS explorer to display
java applets again.
This is working fine again, but i really would prefer to have no need for two JREs.
By the way:
When i first opened the java control panel of the Plug-in and deactivated the update
mechanism , this plugin got really angry immedialtely afterwards. As a result my
laptop rebooted without coming up again. i had to initiate another hard reboot to get
windows back
i really would like to know , whats wrong me or the J2ee and i apriciate
any hint.
Best regards: yours aspirant

One thing you could do if you by all means want to have only one single copy of 1.4.2 on your system is to install standalone J2SE 1.4.2 (this will accomodate your Java console and browser plugin requirements) and then install Application Server only distribution (on the download page this is referred to as "Sun Java System Application Server Platform Edition 8") and sample applications set ("J2EE 1.4 SDK Samples "). In this way you get full content you would get in J2EE 1.4 SDK and all the benefits of standalone J2SE 1.4.2 installation.
This is obviously more convoluted at installation time since there are 3 separate things to install, but it would seem to fit your requirements.
Hope this helps...

Boots to windows startup screen, flashes blue screen, restarts and repeats

HP ENVY H8-1414 Product #H3Z00AAR
Windows 7 Ultimate 64-bit
Alright, so here is my issue. I turn on my pc and it gets as far as the windows startup screen, flashes a blue screen error for about half of a second and then restarts it self. My HDD is recognized in the bios. Tried a memory test in diagnostics and it passes. Tried a hard disc check and it passes the SMART check but fails the Long DST with a failure ID of 0GF21L-0006LR-WPVX0K-61C703 (no idea if those a zeros or O's)
I've also tried the startup repair but it did nothing. So I removed the hard drive and tried to use it in a different PC but had the same issue so I figured the hard drive went bad. Then I tried formatting a spare hard drive and installed a fresh copy of windows 7 on it, tried it on a different PC and it works just fine. However, when I try to use that hard drive on the HP ENVY I get the exact same problem even though it worked just fine on a differenct pc.
I purchased this PC refurbished about 3 months ago, the warrenty just ended a week ago. There have been no hardware or software changes on it at all. This thing worked flawlessly last night... I locked the computer before bad and I woke up to this. No power outages over night or anything. It just doesn't make any sense.

Here are the specs for your HP ENVY h8-1414 Desktop Computer. According to the specs, this model came from the factory with Windows 8 installed. The "blue screen" and restart are normal for Windows 7, when it encounters an error, unless you have altered the default settings.
The LONG DST failure is indicative that the hard drive has failed or is about to fail. Unless the hard drive is moved to an identical or very similar computer, Windows will encounter a "blue screen. This is true with the original hard drive moving from the h8 computer to the other computer and the test hard drive from the other other computer moving to the h8 computer.
Try placing the "test" hard drive in the h8 computer and installing Windows 7 from a DVD or USB stick. If you have any problems, please post back with full error messages and screen shots. Also indicate what stage of the install Windows 7 was doing tat the time.
Please send KUDOs
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

HP G62 Windows Startup error recovery Failure

Notebook:
HP G62 - 228CL
Running Windows 7 64-bit
Hello everyone, I need a bit of help.
My computer will boot windows 7. When I start it up, it tries to boot up. I then get a Windows failed to boot message on the windows error recovery screen and asks me if I would like to use Windows Startup Repair Tool to fix the Problem. But the tool never starts up. It just leads to a windows background and does nothing. I have also tried using f11 System recovery but it does nothing.

Hi,
Firstly, regarding your existing files.
One possible way to try and retrieve your files from a non-booting drive is to follow the process detailed in the link below. The Ubuntu operating system CD you create can run from the CD alone ( ie it doesn't have to install on the Hard Drive ) and I've often found it to be successful in retrieving data even from a failing Hard Drive. When you've created the CD, follow the instructions and see if you can back up your existing files.
http://www.howtogeek.com/howto/windows-vista/use-ubuntu-live-cd-to-backup-files-from-your-dead-windo...
Secondly, regarding the replacement of the Hard Drive.
The drive on the link below is an example of one that would be fine for your notebook.
500Gb Hard Drive
The procedure to replace the Hard Drive starts on Page 52 of your Maintenance & Service Guide.
Once done, simply use your Recovery DVDs to reinstall the Operating System on the new drive - the procedure is described in the HP document Here.
If you don't have your Recovery Discs, you can order a replacement set using the link below.
Order HP Recovery Discs.
If you have any problem with this link, order them directly from HP.
If you live in the US, contact HP Here.
If you are in another part of the world, start Here.
Best regards and happy holidays,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Elements 11 Organizer window is truncated at top, on iMac running 10.9.2, so I can't use Share function, etc.

Elements 11 Organizer window is truncated at top, on iMac running 10.9.2, so I can't use Share function, etc.

Thank you very much. I changed the resolution from 2048 x 1152 to 1600 x 900, and it showed the bar with the Import, Media ... Create, Share buttons, but did not show the bar at the very top with the red, yellow and green buttons for closing, hiding and maximizing the window.
Then I noticed that Apple had an update to Mavericks available. Since I installed that, I can set the resolution back to 2048 x 1152 and still see the Import, etc. bar. I can live without the Close and Maximize buttons, but it does seem like there is a bug lurking here that either Adobe or Apple needs to fix.

Imported photos won't show up as thumbnails in the Organizer window. What did I do wrong?

I recently imported .jpg files from a Canon A3000 and the files show imported but the thumbnails do not appear in the organizer window. When I do a re-import of the same files it give me a dialog box saying thay have already been imported. Can someone help me please.

Please try right clicking the thumbnails and "Update thumbnail" option.
Let us know if that does not work.
Regards,
vaishali

Elements 12 organizer window froze on upper area of desktop

When I open organizer from the app icon the program opens but I can't see or access the menu bar on the top of the window. can't drag or scroll the window down except for the lower rh corner.
iMac 27 with Maverics OS. The editor opens normally but not Organizer for some reason. Can got to full screen but not normal size window.
Here is a screen shot of what I see when I open Organizer. I am using the downloaded version. I also "uninstalled" it once and still have the same problem. It does go to full screen mode but I can't
see or get to the upper part of the window. I also uninstalled elements 10.
Message was edited by: browneye-1

Thanks for your initiative. I just resolved the problem with the help of the Adobe chat support. It seemingly was a Windows issue. I installed a new user account, changed to that user and opened the organizer from there. It worked allright. Even when I went back to my original user account, the error did not recur. Everything is OK now, although the origin of the problem is a mistery to me.
Axelscreen
Von: andaleebfatima1 [email protected]
Gesendet: Freitag, 3. Januar 2014 14:51
An: Axelscreen
Betreff: Elements 12 Organizer window frozen
Re: Elements 12 Organizer window frozen
created by andaleebfatima1 <http://forums.adobe.com/people/andaleebfatima1> in Photoshop Elements - View the full discussion <http://forums.adobe.com/message/5976654#5976654

Elements 10 organizer window position on screen.

I am helping an elderly friend who uses Elements 10 on a MAC, his organizer window appears on screen with the top line/menu bar having File, Edit, find, View etc. off the screen at the top and I can't move it down to display properly. I am not very familiar with a MAC being a PC user myself, does anyone know why this has happened and how to fix it please?

I totally don't understand what you're saying, sorry. One major difference between PSE in windows vs the mac version, is that on a mac, for both the editor and the organizer, that top line is attached to the top of the mac's screen itself, not the program window. You can't do anything to the organizer window that would cover it.
See:
So are you sure he's not just looking in the wrong place? No matter where I put an application window, that top bar with the black apple is at the top of the display in every program.

SB Audigy2 w/Vista: Creative Volume Control conflict with Windows Volume Control(sndvol.ex

Hi Everyone,
I'm running Windows Vista on a Dell Dimension 8300 with a SoundBlaster Audigy 2(WDM) card. I have a few no-mind questions about how these things all work together:
. After I installed Creative's Vista driver upgrade for the SB Audigy 2 series, I noticed that there are now two volume control icons in the system tray. One is for the Creative Volume Control. The other is the original Windows Volume Control (sndvol.exe). Should these two controls be running at the same time?
2. The Master Volume is a lot lower in Vista than it was in XP. When I let Vista pick the sound drivers the first time around, I figured the lower volume had something to do with those. So I downloaded and installed the Vista SB Audigy 2 Driver Upgrade from Creative's website. The volume is still very low, however, and I have to peak all my volume controls to hear much of anything. Does anyone have any ideas why this should be so?
Thanks to all who took the time to read this! Have a good day,
Big Al Mintaka

Hi DakkonA,
Have you been in contact with Support? I would advised you to get in touch with them to rectify this issue.
Best of luck,

Maximizing Window while Control Hidden Doesn't Behave Properly

Hi, I've run into a situation where I'm trying to take advantage of the resizing capabilities of LV8.x and I'm running into a snag I was hoping to get some help on.
Basically, when I have a (grouped) control hidden and then maximize the window and then show the control, the control is not where it should be.
I've attached an example VI.
Any ideas?
Thanks, Bruce
Message Edited by bmoyer on 08-13-2009 09:44 AM
Attachments:
Resize Window while Control Hidden Test.vi ‏254 KB

Hello,
When you are resizing your front panel, it only resizes the visible windows. I have tested this out and submitted a corrective action request (CAR #182933). If you want your panel positioned properly, I would suggest forcing the placement of the cluster by adding an event structure for a panel resize event. This will allow you to determine the coordinates of where it should be.
-Zach
Certified LabVIEW Developer

In windows vista control Panel won't open

in windows vista control panel icloud is there but won't open. how do i fix this? also photo stream is not working right.

Ok, I found another thread on here talking about this and in the end I had to manually delete everything in c:\program files\quicktime & in quicktime alternative and all the quicktime files and folders in c:\windows\system32
Some of those files dated back to 2003!
I reinstalled and everything is ok now.

Program start/restart when windows startup

Hi, I have a java program which I currently compile and run using "Command Prompt".
However, I would like my program start running every time the window startup. How can I do that?
Thanks in advance.

http://jakarta.apache.org/commons/daemon/
http://wrapper.tanukisoftware.org/doc/english/introduction.html

Adding provisioning profile to organization windows for os x application

Hello Everyone,
I'm working on 10.7.2 with iCloud beta 6 to create a test application to test iCloud functionality. I have created provisioning profile but i'm not able to add it in Organizer window.Can someone suggest me on this .please note that all this i'm doing for my mac os x application not for ios. and also in build setting when i'm adding provisning profile name as "code signing identity" it's giving error "there is no matching certificate or private key pair is available" it's just taking 3rd part application certifaicate. all this make me very cofused.
thanks to all of you.

Sorry if this wasn't clear in the release notes. We implemented mobile first but we're definitely working on getting this into an upcoming beta for desktop platforms (AIR and Flash Player).

PSE10 Organizer Window Startup Control

Similar Messages

Maybe you are looking for