PSE7 and Windows 7

I just updated my windows 7 and now my editor in PSE7 doesn't work. What can I do?

Hi,
Please try couple of probable solutions as mentioned below:
Solution 1:
1. Close Elements.
2. Launch the Photoshop Elements Welcome Screen and hold down ctrl + alt + shift as you click Editor.
3. Continue to hold the keys until you see a message box asking if you want to delete Photoshop Elements settings file; click Yes. Elements will open with default preferences.
Solution 2: Try launching with anti-virus off or removing PSE from conflicting list.
Solution 3: In case any network printer is attached try to launch without network or printer uninstall or make different printer as default.
Solution 4:
On the drive on which you have installed PSE,on my machine it is on C:
Go  to C:\Program Files\Adobe\Photoshop Elements  [version number]\Locales\<locale>\Plug-Ins\Import-Exportand you will find twain  plug-in. Remove that plug-in from that location and copy it somewhere  else.
Now launch PSE and check if it works.
For related post for Twain please see this:http://forums.adobe.com/message/2954743#2954743
Thanks,
Garry

Similar Messages

  • PSE7 and Windows Vista 64 Home Premium

    When PSE-7 opens, a warning box with a message:
    ADOBE PHOTOSHOP (Organizer) ,  [and sometimes (Editor)]   stopped working.....
    Windows is searching for  a solution...(and I never received a solution notification)
    After I  re-installed the program- many months ago..It works  OK, now it is not working
    at all, I can manage open editor..but It will bring the same message.
    No other programs had been intsall except DIGIPRO-T-8000U Tablet and Pen, but I deleted
    the Tablet/Pen application, cleaned disk, defrag... Re-Istalle ADObe pS& again and again
    It does not help.
    What can I do? It is a driver a patch needed?  Thanks Olga C

    Try installing the licensing-service update:
    http://www.johnrellis.com/psedbtool/photoshopelements-6-7-faq.htm#_Install_the_licensing-s ervice
    If that doesn't help, then I recommend working methodically through these troubleshooting steps:
    http://www.johnrellis.com/psedbtool/photoshopelements-6-7-faq.htm#_Troubleshooting_Organiz er_crashes
    Many people are tempted to take shortcuts on these or do some steps their own way, especially with the steps listed in the Adobe tech notes.  If you do, you're less likely to solve your problem. 

  • Windows 8 and PSE7 and PSE11 how to add actions

    I changed over to Windows 8.  PSE 7 downloaded and opens up just fine.  I cannot seem to find any info on how to add actions to PSE7.  Windows 8 is not setup like 7.  There is no start button.  You cannot input programdata to find the hidden files.  I downloaded PSE11 trial version thinking it was just PSE 7..........same thing, downloaded no problem, opens up but how do you add actions?   I used many actions to resize the file, sharpen, and a few makeover actions by Florabella.  I would love to be able to use those again.   Thank you.

    You probably need to do some study on how Microsoft expect Windows 8 to be used, especially if you don't have a touch screen.
    Two thoughts
    1. If you don't have a touch screen, Adobe Reader Touch may not be the best choice. It is much more limited than the regular Adobe Reader. Did you pick it for a reason, or just because Microsoft encouraged you into their App Store?
    2. Try a right click, sometimes seems to substitute for a touch off the edge. I know you can't just use the mouse as if it were touch.

  • HP Deskjet 9650 with Photoshop Elements 7 and Windows 7 not printing

    I have a new Windows 7 computer and installed Photoshop Elements 7.0 on it, which works fine, except I cannot print.  I did the installation instructions to use the alternate driver 9800 and can print 8 1/2 X 11 Word documents, but I cannot print a 12X12 scrapbook page to save my soul.  The resume print button keeps blinking and it spits it out blank.  Any help?
    I hope I do not have to get a new large format printer.

    I just accomplished this without any real problems and am now running with my same license on the newly rebuilt PC.  Here is what I did ...
    Originally my PSE7 configuration was set up last year on new Intel I7-based PC running Vista 64 bit version with a retail copy of the PSE7 software, i.e. not the upgrade version.  Once that was setup I imported my catalog from the older Adobe Photoshop Album on my previous system.  That put me at the place you are now, i.e. PSE7 on Windows Vista.
    For this upgrade I puchased the upgrade version of Windows 7 and an additional second disk drive.  I installed Windows 7 onto the clean drive, giving me a dual-boot system for either OS.  While booted on the Vista drive, I used the easy-transfer method to write a backup of my Vista files to an external disk drive.  I then rebooted into the Windows 7 drive and used the Easy-transfer tool to reload the files from the external drive. (note; this easy-transfer included >200GB of music/video/image files so it ran for several hours for each phase of the transfer)
    Once I verified the directory structure on the new Windows 7 setup, only then did I do the installation of PSE7.  That wnet flawlessly and relicensed without any problems.  Next I was able to open up my catalog in organizer and all of the images were intact.  Since then I have had no issues with the configuration.
    So bottom line is you should be fine doing the upgrade regardless of whether you do the upgrade like I did to a new drive or an in-place upgrade overlaying your vista environment.  For the in-place upgrade I would strongly recommend you still do a backup of all of your images and their associated catalog(s) to an external drive.  Win7 is a vast improvement over Vista so I'm sure you won't regret the upgrade but I don't trust any vendor's software upgrade procedure, especially Microsoft so please do the backup first.

  • Problems Extracting Raw off 5d Mk2 with PSE7 on Windows 7

    Hi
    Anyone had any problems extracting the RAW photos off a 5dmk2 camera using PSE7 on Windows 7.
    Basically, the problem occurs when the the camera has Raw files on aswell as jpegs. When I select the option to get files from camera or card reader, I can select the device and then the camera is analysed and the number of files counted. Fine. However, if I then press Get Photo's the window kind of freezes, nothing happens and the window can't be closed. If there are just jpegs on the camera then there's not a problem but I want to be able to use Raws.
    It works fine on Windows XP SP3 with Raw plugin 5.4.
    I've tried all the raw plugins I can up until the latest one that is suitable (v5.6).
    I'm not confusing the 32bit or 64bit versions.
    I'm following the exact instructions on installing the raw plugin's properly.
    I've tried all sorts of different settings in Windows compatibility mode.
    I've run as the administrator.
    I've read numerous posts to see what solutions people have to related but not identical problems.
    I don't want to process it separately and turn it into a company's own file format first (forgotten what it was), I just want to use the Raw files in the same way that they worked on Windows XP.
    Don't know what else to try.......
    Can anyone please help?
    Thanks in advance.....

    Ok.... I've got a work around but there's a definite bug here..... not sure why this should happen.
    Basically, the only way I can extract the raws off the camera is to import a new raw from a folder i.e. 'File > Get
    Photos > From Files or Folders'.
    Then if I go to 'File > Get Photos > From Camera or Card Reader' everything works as it should, the files get extracted
    from the camera.
    Assumed it would be working ok permenantly after having to do that yesterday, but couldn't get raws off again without
    repeating the steps above......
    ....wierd....it's almost like it needs reminding that it can handle raws before extracting.....
    I know someone on another blog said they had the same set up and didn't have a problem, but I wonder if it's something
    subtle in the differences between our base system setup......
    Anyway hope this helps give people a work around if they encounter the same issue?
    If anyone has a permenant solution please let me know as I don't want to have to rename and then reimport a raw file
    everytime I extract photos......

  • Photoshop Elements 7 and Windows 7

    I am currently running Photoshop Elements 7 on a Dell machine with Vista 64.  When I bought the computer, Dell offered a free upgrade to Windows 7 which I have ordered.  If I install the upgrade to Windows 7, will my Photoshop Elements 7 run without major problems?
    Thanks in advance for your assistance.

    I just accomplished this without any real problems and am now running with my same license on the newly rebuilt PC.  Here is what I did ...
    Originally my PSE7 configuration was set up last year on new Intel I7-based PC running Vista 64 bit version with a retail copy of the PSE7 software, i.e. not the upgrade version.  Once that was setup I imported my catalog from the older Adobe Photoshop Album on my previous system.  That put me at the place you are now, i.e. PSE7 on Windows Vista.
    For this upgrade I puchased the upgrade version of Windows 7 and an additional second disk drive.  I installed Windows 7 onto the clean drive, giving me a dual-boot system for either OS.  While booted on the Vista drive, I used the easy-transfer method to write a backup of my Vista files to an external disk drive.  I then rebooted into the Windows 7 drive and used the Easy-transfer tool to reload the files from the external drive. (note; this easy-transfer included >200GB of music/video/image files so it ran for several hours for each phase of the transfer)
    Once I verified the directory structure on the new Windows 7 setup, only then did I do the installation of PSE7.  That wnet flawlessly and relicensed without any problems.  Next I was able to open up my catalog in organizer and all of the images were intact.  Since then I have had no issues with the configuration.
    So bottom line is you should be fine doing the upgrade regardless of whether you do the upgrade like I did to a new drive or an in-place upgrade overlaying your vista environment.  For the in-place upgrade I would strongly recommend you still do a backup of all of your images and their associated catalog(s) to an external drive.  Win7 is a vast improvement over Vista so I'm sure you won't regret the upgrade but I don't trust any vendor's software upgrade procedure, especially Microsoft so please do the backup first.

  • Reinstalling PSE7 in Windows 7: serial number not accepted

    My hard drive was replaced yesterday and Windows 7 reinstalled.  I just bought Adobe PSE13, but prefer to work in PSE7.  I have installed PSE7, but the program will not accept my serial number:    I try typing the number in, but nothing happens.  Please help.

    Dear Mr. Weller --- I cannot get your on-line link to work, so do not know if the "answer" (which I have not seen) is correct.  If you could cut and paste it and send it to me, that would be wonderful and, if it works, I would be delighted to mark the query as "answered."  I did search the site prior to posting my query and did not get any response.

  • Have pse7 using windows 7 it wont recognize my dvd so i cant make vcds

    Have pse7 using windows 7 it wont recognize my dvd burner so i cant make any vcds. The pc is brand new.

    pamgerstung
    You appear to have a burner recognition problem that is manifesting itself when you try to do the burn to VCD in the Organizer 7 Slideshow Editor.
    I will not get into the classical VCD (352 x 240) versus DVD (720 x 480) obvious considerations.
    Your issue may go deeper than an Organizer VCD burn feature. Are you sure that you are not dealing with a Windows DVD/CD burner recognition issue rather than Organizer 7 Slideshow Editor VCD not recognizing your burner?
    For troubleshooting purposes, can you or have you successfully burned one of your wmv files to DVD-VIDEO on DVD using something like Windows DVD maker on this same computer same burner if you can see the burner? Put another way, if you open to Computer to view your drives, is your DVD/CD drive displayed there?
    ATR
    Do you have the Windows DVD Maker included on your Windows 7 64 bit computer? If you do not know, in Search, please type in Windows DVD Maker and see if it is revealed.

  • Problem with Sessions and window.open

    Hi,
    Hi everyone,
    Help Please!!!
    I am working with Sevlet session objects and HTML forms and windows. I have an HTML form for the user to supply a username and password. Once the user clicks submit I need to open another browser window that has no toolbar, no location, no status bar, etc. The user should also be able to go back to that login screen and login again and open a 2nd, 3rd, etc. instance of the application. My problem is that each application is being asigned the same sessionId. I believe it is being asigned to the main login window and thus to the other child windows it opens. Is there a way to work around this? Do I need to make the user open another browser window to login? I need to be able to let the user open multiple instances of the application with unique session ids for each.
    Any insight is GREATLY appreciated on this topic. Anything you can tell me about sessions (Java), IE, window.open would help greatly!
    THANK YOU IN ADVANCE!!!
    MA

    To achieve this, you must introduce another level of
    abstraction to the Servlet specifications. When you
    work with JSP/Servlets you use mostly the HttpSession
    to handle user related tasks, and the aplication
    context, for things that are common to all users. But
    inside the HttpSession scope, you want to create
    containers that have 'smaller' scope and are uniquely
    identified.
    A ipothetical scenario :Let's say that you must have
    multiple connections to several databases, on each
    database user rights beeing diferrent, and you must be
    able to track user actions globaly, and eventualy
    capture a 'Close Application event' and close all db.
    connections.
    1. when the user first accesses the login frame create
    the HttpSession. In the HttpSession object, store a
    Hastable (let's call it 'ConnectionTable'). Each
    object in the Hashtable must identify uniqely a
    database connection. Now, to create unique identifiers
    ids, make the keys in the hashtable java.lang.Long
    objects, created using System.getCurrentTimeMillis().
    This guaranties there will be no possible confusion.
    From each new open window, on each request to the
    server, along with the usefull parameters, send the
    connection identifier. When proccessing the request,
    select the object from the Hastable wich corresponds
    to the ID.
    2. Now, the values in the ConnectionTable, must act as
    the containers that I mentioned in the first
    paragraph. The simplest way to do this is to have
    again a Hashtable derived class to do the job, wich
    exploses methods similar to HttpSession: setAttibute (
    Object key, Object value) and getAttibute ( Object
    key, Object value). This container may use internally
    a Hashtable to store object, and explose only the
    getAttribute and setAttribute methods for clarity. Any
    way, this is a problem of implementation. Let's call
    this class CustomSession.
    Now, a textual activity diagram:
    1 user accesses the main page, you start a new
    HttpSession; In the HttpSession object, store the
    ConnectionTable object.
    2. the user enters the userID and pwd and adatabase
    name, and a new window is opened. Let's supose the
    data entered is valid.
    3. when you process the login data, you create a new
    CustomSession object. you put in it whatever you would
    put in your HttpSession. You generate a unique
    identifier using System.CurrentTimeMillis(). Put the
    CustomSession object in the ConnectionTable, using the
    generated id as key. Send the response.
    ..... later on .....
    100. the user asks for a particular action to be
    performed - e.g. a row deletion. The page contains a
    form with text field where the user introduces the
    row number, a submit button and a hidden input with
    the ID.
    101. you process the data. Get the ID from the request
    object, get the ConnectionTable from the session, get
    the CustomSession using the ID as key, do whatever
    your logic was doing, but obtaining the objects from
    the CustomSession instead of HttpSession
    NicNic,
    Very slick idea. I think that it could work and it seems that there would be not security issues because the id that you would store on the client side is the Unique Identifier and not the actual Session Id. Do you forsee any security issues for this implementation?

  • How can I make an icon that links to a webpage that works with Mac and Windows??

    Hi!
    I burn CDs with my photos and send them to clients.   Besides the photos folder, I would like to include a file (similar to the .webloc files on the Mac Desktop) that can be clicked and it will be linked to my website - it will open up a browser window and go to my website .      Is it posssible to make one of these icons that works with both Macs and Windows machines?  Thanks!

    Now it works!  Thanks, Denico!
    The reason I saved to text:   The first time I followed your instructions, it did not work.   I tried to figure out what I did wrong and saw that you wrote to "save as plain text."   I did not know what this means and there was no option available to save a plain text.  So I looked around and saw "save as stationery" and I guessed that maybe that was what you meant.   And after that, it worked!  But the next thing you know, the icons started duplicating themselves.
    I guess I had made a different mistake in the beginning and I fixed it without knowing what it is.
    Thanks for clearing that up.
    But just one question.  WHY does saving as "stationery" make an icon duplicate itself?

  • Is Verizon going to acknowlege the problems with FIOS and Windows Vista

    For months now, I have been reading the numerous problems Fios internet customers are having with Fios internet/Actiontech Router and Windows Vista and there has been no acknowledgement by Verizon of this current major issue.
    I have also experienced the exact same issue for months now since I switched to Verizon FIOS internet. Previously I had Comcast HSI using my Windows Vista laptop.  I had their service for over a year and I NEVER has a problem with the Windows Vista globe icon disappearing and loosing internet connection. The Globe always stayed on and never went away and I never lost connection when I had Comcast
    I had Verizon FIOS installed last September with my Windows Vista computer and my wireless internet connection started to drop from day 1 and it has been a daily occurrence for over 5 months now.  It has gotten so bad, I have had to hardwire my laptop to to be able to use the internet uninterrupted.
    This is what daily scenario is:
    When I turn on my laptop(with Windows Vista, I can initially get full internet access(with the globe on and it says "Local and internet). After about 10 minutes or less, the globe switches to "local only" and I can still get  internet access.  After another 5 or so minutes, a large X covers the globe and I lose internet connection entirely. The actiontech router wireless signal is no longer listed as one of the wireless networks.  The only way for me to regain internet access is either to restart my laptop or reboot the actiontech router.
    Numeorus posts here, over by DSL forums(Broadband Reports),Microsoft's website and a few othere websites detail this issue.
    I am extremely shocked and surprised that Verizon has not tried to fix this issue by working with both the makers of the Actiontech Router as well as Microsoft to find out what the problem is and how to fix it.
    I would just like to reiterate I strongly believe this is primarily a FIOS internet issue since I previously had Comcast HSI for over a year with the same Windows Vista laptop and I NEVER had that problem. Also,  I can connect to my neighbors wireless connection(she uses Comcast HSI) and when I do, the globe stay on all the time on my computer and the internet does not lose connection.
    I know that there are a couple of Verizon employees here. Please tell the higher ups who handle FIOS internet that this is a major issue that needs to be resolved as soon as possible.
    P.S: Please don't tell me to go by my own router because then, I will have to deal with the issues of setting it up to work with Fios TV and the related VOD, widgets, remote DVR compatability issues to deal with. I don't think I can deal with the additional headaches. 

    FIOS is short for fiber optics.  fiber optics is different technology than DSL.   
    With that said, if you search the Microsoft databases for vista issues with fiber optics, (CURRENTLY THERE IS ONLY ONE PROVIDER OF FIBER TO THE HOUSE, that being Verizon, so yes you can also search Vista issues with verizon and\or fios) and you will find that Microsoft already acknowledges this issue with their software.  AND they offer you a fix.
    cjacobs001

  • IPhone 5 iOS 6.1.4 and Windows 7 x64 USB Driver Issues

    Been pulling my hair out with this one for the last week or so and haven't had any luck finding anything on the forums or the web regarding a solution short of a full reinstall of Windows 7 which I am not prepared to do at this time; so hoping someone here can shine some light on this for me
    I have a iPhone 5 that is updated to iOS 6.1.4 and a recently built Windows 7 64-bit machine. All of my other USB devices function fine (keyboard, mouse, Xbox 360 wireless receiver for Windows, and a Seagate 2TB external USB drive). I've downloaded the most recent version of iTunes, installed successfully and then attempt to plug in my phone to sync. I get the standard Windows *ding* that I've attached a device and 1 of 2 things happens (I haven't been able to determine what causes one reaction to happen versus the other): Windows will successfully install the 'Apple USB Mobile Device Driver' successfully and it will appear under my USB devices in Device Manager. However - iTunes will not recognize the phone and I cannot see it in Windows either. In the 'Devices and Printers' snap-in my iPhone will appear under 'Unspecified Devices' as the 'Apple USB Mobile Device'. The iTunes diagnostics fail to find a connected device so the tests fail. As soon as I unplug the device, the strangest thing happens: Windows will start trying to install a device driver and after a few seconds it will fail stating that the "MTP Device Driver" installation failed because the device was unplugged. iTunes also thrown an error "iTunes cannot connect to this iPhone" throwing error code 0XE8000065 (I've also seen error code 0XE8000085 as well)
    After some finagling, I've managed to get Windows to recognize the device under 'Portable Devices' in Device Manager as an "MTP USB Device" using the generic driver. At this point, I've tried updating the driver and manually specifying the Apple USB driver located in the C:\Program Files(x86)\Common Files\Apple\Mobile Device Drivers which updates successfully but then changes the device to "Apple USB Mobile Device" and moves it under the USB Devices in Device Manager; and Windows nor iTunes can see it even still.
    I've tried removing iTunes several times and ensuring that all remnants of the installation are gone (registry and folders on the installation drive) and have disconnected all my USB devices short of the keyboard and mouse and still I get the same results. At this point, I'm afraid that a re-install of Windows is going to be the solution; but it's a drastic one (I have a SSD drive where Windows is installed along with all of my games for faster load times/better performance and do not want to have to redownload\reinstall all of them) and I'm not prepared to undertake it at this time, which is why I'm posting here
    I've used a utility called USBDeview that sees my phone is connected - so I know from a functional standpoint that my USB ports are good and working. I also know the cable is good too - my daughter's PC (Windows 7 32-bit with NO iTunes) immediately sees the device when I plug it in, installs the drivers, recognizes it as an iPhone and I can then see/browse it in Windows Explorer like I would normally expect. My work PC (Windows 7 64bit, NO iTunes) sees the device just fine as well. I would immensely appreciate anyone that has seen this issue or has any additional solutions I can try.
    It's also worth mentioning that I've never used Kapersky antivirus so the UPPERFILTERS value in the registry that I've seen as a solution on some forums is not present on my machine. I'm using Microsoft Security Essentials as my antivirus (no flaming please lol - it meets my needs and is extremely lightweight, which is why I'm using it on a gaming rig) and it's not indicating any issues. I've also tried running iTunes as an administrator (even though my account is a local admin on the machine) and that does not have any effect either.
    If there is anything I left out, please let me know; and I thank you in advance!

    AphexTwin wrote:
    - no Apple input?
    Of course not.  Didn't you bother to read the TOU of this forum?  This is a USER TO USER technical support forum.  Apple doesn't post here.

  • IPod Nano: Error Message "The USB device has malfunctioned and Windows does not recognise it"

    Hi everyone, I just received 2 brand new iPod Nanos for my kids for Christmas, thought I'd be smart and sync them both now before wrapping them so I don't have to be messing around with them on the day. One synced without a problem, then using the same cable, same computer, same USB port, the 2nd one came up with "The USB device has malfunctioned and Windows does not recognise it" I've tried restarting my computer, unplugging and reinserting the USB. Is there anthing else I can try before returning it? Thanking you for any help.

    I have solved my problem, I ended up ringing Apple and got an awesome lady who told me to reset it by pressing the sleep button and menu button together for about 10 seconds and once it actually turned on for the first time the computer then recognised it, so it's all good, :-) Thank you lovely lady!

  • ITunes and Windows 8 Home Sharing (Possible Fix)

    If this fix has been posted elsewhere then I apologize, but I wanted to share what I stumbled on as a possible for for iTunes Home Sharing and Windows 8. I did a lot of port forwarding, both on my router and my Norton firewall, but nothing seemed to help. After a few minutes my Apple TV and iOS devices would stop seeing my iTunes library. The only way to fix it was to reboot the router.
    On a whim I looked in my Device Manager and found under Network Adapters a device called Microsoft Kernel Debug Network Adapter. I disabled this, rebooted my computer, and have since no issues with Home Sharing. It's only been a few hours, but that is the longest I've gone since installing Windows 8. I'll look in the morning to see if it still works.
    So give this method a try and see what happens. Hopefully it will fix your problems.

    Here are the three steps I took to get Home Sharing working successfully on Apple TV. This has worked for the better part of a week so hopefully it will work well for others.
    In your software firewall create two new Inbound Rules. Open port 3689 (TCP) and port 5353 (UDP) to All Programs.
    If your hard drive goes to sleep after a certain period, be sure to change to something greater than 30 min. (Control Panel -> Power Options -> Change Plan Settings -> Change Advanced Power Settings -> Hard disk -> Turn off hard disk after -> Setting)
    On your Apple TV change when it goes to sleep. I changed mine to 10 hours.
    This seems to keep the connection alive. On occassion it will look like it gets stuck loading, but just let it go. At some point it wil kick on. If you generates a connection error just try loading the media again and it should start.

  • Software and Windows 8

    Hi there, can somebody PLEASE tell me how i can download the desktop software for my pc. I have a Blackberry 9300 and Windows 8 on my pc!!! URGENT

    I would recommend the most recent Desktop Software, version 7. Download it here:
    https://www.blackberry.com/Downloads/entry.do?code=A8BAA56554F96369AB93E4F3BB068C22
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

Maybe you are looking for