Publish swf

Hi
When i publish an swf, in my PC runs ok but in others PCs with Flash Player instaled, dont run... i dont know what is the problem... can anybody help me plese? The SWF appears crashed on the other PCs....
Thanks!
chaviseo

What version of the player are you publishing to? What version of the player is installed on these other computers? Can you show us a link to the file?

Similar Messages

How to set default size for published SWF in Catalyst CS5.5

I create a 800*600 pixel project in Catalyst CS5.5 and published it as .swf.
But when I opened the published .swf, the default size is smaller than 800*600. I have to resize it by myself.
So is there any method that I can set the default size for published .swf?
Thank you guys! Best regards.
Nick

When you start new Flash Catalyst project, you have the option to enable resizing
This setting is enabled by default.
If you need to change this later, you can go into Modify > Artboard settings.
Now when you publish your project, the width and height will be used instead.
As to manually editting the HTML file, there are 3 tag sets that define the width and height of the project (to handle various browsers). You will need to adjust the values in each of those tag sets. You should only need to do this if you can't republish the file.
Chris

Detect flash player version of published SWF

Hi I have a swf file (let say child.swf).
Once It loaded I want to know parent swf was published on flash player 9 or flash player 10. How to find that?
Question:
1)parent.swf loades child.swf
2)after child.swf loaded --> need to check parent.swf is published on flash player 9 or 10.
3)if parent.swf published on flash player 9 then child.swf will run a function
4)if parent.swf published on flash player 10 then child.swf will run some other function.
On the above for the based on the 2nd point question 3 or 4 will happen.
On the above case I have only one parent... In some other case I may have multiple parents. My question to how to detect top most player's published version?
Note:
Capabilities.version returns current flash player version which is installed on browser (it is not help my question)
The following link has infomation about As version used on the swf (it is not help my qeuestion)
Detect ActionScript and Flash player version of Published SWF
Thanks,
Siva

Any Idea guys?

Button hyperlinks work in project preview but not in published .swf

Captivate 6, button hyperlinks work in project preview but not in published .swf, the cursor changes the “the hand” but the hyperlink does not redirect.
Any ideas?
Like I said my buttons work great in preview mode after publishing, one click and the PDF opens in a new browser window. Open the project through the published .swf files and the links will not work.
Using Captivate 6 on WIndows 7

Hello,
Welcome to Adobe Forums.
Once your project published, add the .swf file in Flash Global Setting :
1) Right Click on the content (Published .swf file) and click on Global Settings
2) Go to Advanced Tab and Click on Trusted Location Settings (Scrool down to see this button)
3) Click on "Add" button and then "Add file", browse for the Captivate 6 published file and click on OK
4) Launch the .htm file again (Location where Captivate publish your project)
Hope this helps !!
Thanks,
Vikram

Publish SWF Output Options Export HTML

I have a number of projects that display the Export HTML,
Output Option of Publish SWF as checked and disabled. When I
publish the project the htm file is not generated. All of these
projects have SCORM Reporting selected and should be producing the
swf file, htm file and scorm_support folder, but all I get is the
swf file. Any thoughts?
Thanks,
Raymond Sugel Sr

IThis is an aside but would be good for other newbies to
know:
what I learned and maybe you already know this is that when I
published (having htm selected) it generated an output folder on
its own!!! Lorn behold my htm, swf, and a file named js (?), I
think was in that folder. I would have never gone looking for
another folder but happened to see that was where I had placed by
1st cp project days earlier.

Image quality degrades in published swf

I've built a Flash site for a freind who is a photographer.
There are over 100 images on the site that are imported jpegs. Most
of them look fine but two of them look very washed out when I
publish my swf even though in the Flash project file they have very
sharp contrast. These particular images are monochromatic. Is there
anyway to preserve the variation of tones in the published swf?
I've tried using them at maximum image quality, but had the
same result.
Any suggestions would be greatly apreciated.

I tried saving as a png, but I got the same result. It's like
my black becomes a dark grey and my midtones go light/
white.

CS5.5 Publish SWF including Main.AS script

Hi,
In Flash Pro CS5.5, I've created an Fla and scripted it (in AS3) using a separate AS file (package) which is linked. When I publish the SWF and both the SWF and AS files are in the same folder, it runs fine. If I separate out the SWF (without the AS file), and try to run it, it doesn't play (run the script).
How do I include (embed) the AS file into the published SWF so that wherever the SWF is located, it is self-contained so that it plays using the script from the AS file?
Regards,

Hi Michael,
Thank you for this explanation. After a lot of experimenting, I seem to be able to get the AS's script included in the published SWF, but 6 MP3's (although imported to library and/or stage) are still separated and, unless in the same folder as the SWF, will not work. With beginner skills, I think that maybe this is caused by these MP3's also being loaded in the separate AS file. Ithink that all of this could be solved if I could figure out how to put all the script in a single Fla, then maybe it could somehow also "embed" the 6 MP3's in the final published SWF. I've tried to re-do the AS file's script, but since these are "public" class definitions, etc., keep getting error messages. Quite a "mess." Not sure how to fix it.
Regards,

View last published swf from flash authoring envoirnment

hi guys
It might sound silly but how about having a shorcut/tool in flash IDE to view recently published swf file
basicaly i m not updating content outside flash i.e. XML,images and I dont want to use windows explorer to run swf file and check the updated content
Is there any quick way to achive this?
adobe should look at these small things

"Open Recent files" in file menu allows to open recent source files i.e. fla, as and not publised swf files
Basicaly I my point is , why i have to publish fla when there is no channge
I have a swf wihch is getting loaded in a container and no content/code is referenced in parent container. I am making changes in child fla and compiling it.
to view the application i might have to publishing Parent fla or goto explorer to run parent swf which is very comfertable.

Layers/MCs no loading in published SWF

This is boggling my mind.
Certain pieces of my published SWF are not loading on the
designed site. There doesn't seem to be any reason for this OR a
method to why it's choosing the elements in question (though it
always seems to be the same ones).
The elements that aren't loading are simple movie clips - not
externally loaded, nor even dynamically loaded from the library -
and simply don't appear on the stage. A reload usually fixes it and
the clips load; however, this, obviously, should not be a necessary
action to get the SWF to load correctly.
Does anyone have any insight at all?

Hi,
I am new to Flash but know what you are talking about (I
hope).
It sounds like you need to be reminded about the "publish"
settings. Go to your "Properties" window, select Publish:
"Settings" button to open the settings window.....
You will want to toggle the "Export Hidden Layers" checkmark
on or off depending on your needs.
Does that fix it for you? If not, I didn't mean to be a know
it all. It's probably one of the few things I do know about this
app.
Take care. :)

Two CS4's produce different published .swf from the same fileset

Hello, I'm a novice at Flash, but an experienced troubleshooter, I've spent days on this intriguing problem:
*Can two CS4's produce different published .swf from the same fileset?
I have a flash suite written by a young man in China.
When I test the .swf file in the suite it works fine.
However I need to make some minor redesigns so I need to change the .fla file - but before I do I found that when I publish a new .swf from the .fla file (with all the necessary action scripts/xml etc in the right place) it doesn't produce the same outcome. Instead the navigation (next page, items per page etc) is missing.
When he does the same thing (I trust his integrity) he gets the new .swf with the navigation in tact.
You can see the two outcomes at the web address below (mock data).
There are no code changes, no library changes that I can find.
So I thought maybe there is something about different settings or 'environments' that can affect the outcome?
You can see at >> http://www.zaphmann.com/source/source.html << the correct navigation.
Then merely republishing the source.fla (and a rename of .swf) NOW The navigation is gone. >>>> http://www.zaphmann.com/source/sourcetoFromFLAswf.html <<<<<
Any ideas???
Thank you - a free book to anyone who has the answer.

Hello Ned, I
definitely have the very latest version, I will ask Mr. Chen to confirm his version. If his version were, say, 6 months old could that be of any significance?
The software suite appears to have authored produced a while ago as it uses actionscript 2, or maybe he just prefers that.
Basically the suite worked until he added a custom 'deeplink' (basically id tags in a few AS) and after which it still works at his end (compiled with CS3 or CS4), but not when I do likewise from the fla.
I have trawled through the AS code changes and see no errors or changes that would affect the navigation portion of the code which remains the same, so I hypothesized that there may some settings that could affect the publishing.
Young Mr. Chen in China seems to be a bright young man but not sto be so keen on deep troubleshooting...
Any ideas you have, however wild are welcomed, I can also send source files if that would help.

Captivate 4 published SWFs won't play suddenly

Hello, I have been happily making Captivate 4 training, using a template. The published SWry mF movies have been playing just fine... on my PC and several others.
But today went to show off my work to the boss... who HAS successfully played previous Captivates I've made, and they won't play.
Double-clicking the HTM, or trying to open the SWF from the browser just shows a blank white screen that does nothing. What would cause a published SWF, etc., to suddenly not play on selected machines... the owner doesn't remember chanigng anything...
And, what would be my trouble-shooting sequence to try and fix this problem?
Thank you very much

Hi there
Same dog, different leg action. In other words, what you linked to is a red herring.
What I mean by that is the article you linked to is referring to an inability to preview from Captivate 3. You are talking about Captivate 4 and the issue doesn't seem to manifest until after you publish, right?
Sure, Flash Player 10 may appear to be the common link at the moment, but we don't know for sure. With Captivate 3, the issue was only with preview. The output worked just fine. So the issue there is with an internal mechanism in Captivate as you work to create your content. What you are seeing now is certainly related to the internals of Captivate, but 4 is a new beast. It would seem that 4 has maybe introduced something causing this for you.
There may have been a few other posts related to this phenomenon. But they are very few and far between. Given the widespread use of the Flash Player, if it were solely an issue with the Player, I might expect we would have seen loads of reports. But we haven't.
I'll be very interested to see what you discover. Out of curiousity, I'm guessing you have attempted different combinations of settings? AS2 VS AS3, externalizing items, etc.?
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Publishing SWF in Adobe Captivate 3 produces no output

Hi,
Until recently I could merrily publish SWF, Adobe Connect Pro, Standalone (.exe) in Adobe Captivate 3. Now on some of my "presentations" when I try to publish as SWF no output is produced. Although I do get the progress bar, and the usual messages saying that SWF files are being compressed, etc., and although I do get the green check mark representing a successful publish, the "View Output" box is greyed out. When I navigate to the location where the SWF should be there is simply nothing there. Publishing to STANDALONE, on the other hand, works perfectly fine.
As I say, I can still publish to SWF with many of my Captivate 3 presentations. But with the others I can only publish to STANDALONE where everything including the "View Output" box works fine. All my Captivate 3 work is based on a single template so I can't understand how this could be related to preferences but I'm willing to try any good recomendation.
Any ideas?
Thanks!

I'm sure there are other forum posts about this out there but
I think this is how you do it.
In Captivate go to the Project menu and open the Skin Editor.
On the Borders tab you need to switch off borders.
I think this should give you one file when you output but you
will have to check whether the skin now covers part of your
presentation.
If so you may need to resize your project height to include
the height of the playback control. Go to Project > Resize
project.
Hope this helps.

Resetting default name/location for published SWFs - how?

I have several FLA files that have had the default name and location for the published SWF changed from the default (which normally saves the published SWF with the same file name as the originating FLA and in the same location). I want to use these FLA files as the basis for new animations but every time I create a new version, I have to remember to go to File -> Publish Settings... and manually change the file name to the new version.
Is there any way to reset the default save settings (without changing the rest of the publish settings)?
I'm currently using Flash CS5.5.

This has always been on my wishlist but Flash will only reliably save, as you said, to a relative local location. If you specify a fill location (C:\this\that\there.swf), and then open a new SWF and publish it, you will find exactly what you did, that it doesn't publish where you told it.
The only way I got around this was sticking very closely to relative paths. Flash doesn't have a problem if you publish to a location like: ./../bin/my.swf
If you point it directly to a fill path without using a relative path, you'll need to hit browse and repoint the publish to that location every time you open the file. Annoying, I know, and I hope it gets fixed real soon.

.load method won't execute in published .swf

Hello
This line of code won't execute in a published .swf. Test movie (ctrl + enter) works fine.
j_session = new URLVariables();
j_send = new URLRequest("https://web.e-fon.ch/portal/j_acegi_security_check");
j_loader.load(j_send);
I'm assuming it's some type of network permission. Ideas?

upload to a server and test or add the file that contains that code to your trusted files.
also, you may need a cross-domain permissions file if that is a cross-domain request (if it's not, use a relative path) and you expect something returned to your flash.
also, you're not defining or sending any variables which may or may not be an issue.

Help with publishing .swf files in iweb...

Hi,
I am trying to publish .swf files into my website. I have uploaded the files in my idisk in the 'Web' 'Sites' folder where the rest of my website files are held. I have used Roddy's html snippet...
<iframe width="420" height="420" frameborder="0" src="http://idisk.mac.com/username//Web/Sites/flashfiles/filename.swf"
</iframe
When I publish and visit my site I get asked for my username and password for idisk(?) I have not set this (I've checked). Can anyone shed any light on why this is happening. Have I uploaded my .swf files to the wrong place maybe?
Thanks in advance

ALWAYS define URLs from --the-- your visitor's browser point of view.
http://idisk.mac.com/username//Web/Sites/flashfiles/filename.swf
should be
http://web.me.com/username/flashfiles/filename.swf
Message was edited by: Wyodor

Published SWFs not working from CS3 on Mac?

This one REALLY has me stumped..
I am working on a Mac Dual 2-Gig G5 running OS 10.4.10 and
Flash CS3.
I have a web site for a client posted (
http://www.aronwiesenfeld.com
). This site has been running flawlessly for over a year published
to Version 8 Flash Player AS v2.0. This client asked me to create a
new temporary splash page last night that would announce his new
Art Show and then click on into the main site. This site uses a
Shared Lib, a SharedTrigger, a Core SWF (containing the main site
navigation elements and handles loading of various movies into
levels) and a Splash SWF (that contains the two splash screens and
initial navigation to areas of the site. The problem I THINK I am
having is in the Splash SWF... or is a problem with my LOCAL Mac
installation? When I click one of the 5 Site Nav buttons it is
supposed to tell the main core movie to advance to a new frame (20)
and I target that movie by referring to _level0. This has worked
fine for the past year (on this and other sites). I am attaching an
example of the code used on each of the initial Nav buttons in the
Splash swf .
So here is the mystery...
When I "Test Movie" inside Flash CS3, everything works/looks
"perfect". If I then go to the desktop and find the generated HTML
file and open it in Safari (both version 2 and 3-beta), or Firefox
or Opera, etc., everything looks fine until I click one of the
initial text Nav Buttions. At that point it takes me to the main
site and loads the external SWF into a level as it should
(indicating that the 3rd line of code on the button is execution
and by the fact the the Splash movie disappears, it indicates that
the core movie is indeed moving to frame 20 (_level0) as requested
in the first line of code. However, all of the main site navigation
buttons along the bottom of the main site as well as the background
NEVER APPEAR? Also when I start to move the mouse around the loaded
external movie the site completely crashes and I get a blank screen
- IN ALL BROWSERS whether I am launching the site from my hard
drive or the Internet!! But it works perfect INSIDE Flash CS3.
Now comes the real kicker...
Just for the heck of it after spending 3 hours trying to fix
this on my main G5 tower(publishing to Player version 9, etc.), I
decided to try accessing the site from my old G4 laptop. Ready for
this? The site appears to be working perfectly IN ALL BROWSERS ON
MY G4 also running 10.4.10!!!
So my guess is maybe their is a problem with the Flash Player
Plugin in all my browsers on my G5 or the Flash Plugin has a
problem with OS 10.4.10 only on my G5. BUT, even if I launch this
site directly in Flash Player from the desktop on my G5 it does not
work - so the stand-alone player is having the same issue - yet it
works fine on my G5 INSIDE of Flash CS3.
I thought I had seen it all the last 5 years with Flash, but
this one has be completely stumped!
My client emailed me from California and said the site was
working fine there of his PC. If that is true then I am having a
LOCAL Flash Player problem on my G5 running 10.4.10.
In addition to my question, if anyone can give me feedback as
to whether or not this site is working on your machine/browser/OS,
could you please let me know? You will know if the site is working
if you click on Enter Site, then click on any of the 5 buttons
(except Info) and you see a grey background behind the image and
the lower navigation string appears.
Thanks!

Well after trying everything I could think of I started down
the list again. I re-downloaded the Flash Player 9 r47 Mac
installer and ran the installer again (which I also did last night
with no success).
This time after re-installing the plugin - ALL THE BROWSERS
IMMEDIATELY STARTED WORKING ad the site now comes up fine - so,
apparently I had a bad Flash Player install in my browser!

Publish swf

Similar Messages

Maybe you are looking for