Published Manual not visible

I have published a RoboHelp 10 help manual to a sharepoint 2010 site, but users who don't have the software installed on their machine cannot see the manual.

What do you mean by "the software"? Is this the application your manual relates to? They should still be able to access the SharePoint site manually, or are you saying they can't?

Similar Messages

Published Page not visible

I am new to Dreamweaver and I recently inherited our website to maintain, using Dreamweaver CS3. I made some updates to a page but after I "put" them the changes are not visible. Here is what happens; If I go the our website to view the page, hover over the main menu for the page, then scroll down and pick the page the page is unchanged. If I then click on any other page then go back to the page I changed, my changes show fine...not sure what I am doing wrong that the changes are not posted immediately.
Please feel free to check it out. www.brattonsteel.com, hover over products, click stair systems. If you see my changes, you will see three names, phone numbers and email address near the top. If you don't see them, click a different page, then go back to the stair systems page and you will see them.
Thank you,
David

Two different pages
The link below is the correct page where you have made your changes:
http://www.brattonsteel.com/products-stair.htm
The link below is the original page which is accessed via the homepage.
http://www.brattonsteel.com/stairsystems.htm
Make sure your navigation links all point to the correct page.

BI Publisher Tab not visible in Windows 2007 with Windows 7 64 bit Config

Hi All,
I was working with BI Publisher till last week in my system having windows 7 64 bit edition with Windows Word 2007 installed. When i started my work on Tuesday this week, i was not able to see the BI publisher Tab in the Word. But it's visible in Excel. I tried looking in to the forum and got solutions such as Enabling Macros, Enabling the Trust Access to VBA Project Model and Re installing Word and BI Publisher.I tried everything but still the issue is not resolved.
I dont find any *.exd file present in my system to prevent the Add-Ins from displaying. I'm not sure what update had made the BI Publisher to be hidden. Please let me know if you any suggestion or workaround as my project is in critical state with strict deadlines.
Thanks,
Bala Maheshwaran

If you cannot show the BI Publisher Macros in Word :
1.     You have to uninstall the BI Publisher desktop
2.     Install the BI Publisher as (Right-click on the "Command Prompt" item and select "Run as administrator".)
3.     If you cannot show the BI Publisher macros and in word options show TBmenu as disable you have to do :
4.     Click the Microsoft Office Button , click Word Options, and then click Add-Ins.
5.     In the Add-ins box, identify the add-in that you want to enable and note the Add-in type located in the Type column.
6.     Select the Add-in type in the Manage box and then click Go
7.     Select the check box for the Add-in that you want enable and then click OK.
8.     Close the word
9.     Reopen the word , than appear the BI Publisher
Azita

RDS 2012 R2 Collection - Published Remoteapps not visible

Hello,
I have a strange issue with a RDS Deployment I´m setting up for a customer.
RDS Roles setup:
Server1: RD Licensing / RD Gateway
Server2: RD Connection Broker / RD Sessions Host / RD Web Access
I´m all done with the LOB Apps as well as adding ~30 users and migrated their profiles, I have set up UPD etc. All is working great and I´m almost ready to take it into production...apart from this annoying thing.
I have created a Session Collection and published some remoteapps.
However when I log in to the rdweb site it doesn´t show the published Remote Apps.I have tried to unpublish / republish, reboot and so on to no avail.
How can I troubleshoot and solve this?
Sure I could delete the session collection and create a new one, but what will happen with the created UPDs that has all the customized settings for the users (store all ?
Can those be redeployed to the new Session Collection ?
Also, I cannot be sure that this will even fix the issue.
Any advise are very welcome.
Thx /Tony

Hello Darmesh,
I did not assign any specific permissions, domain users is set. I ended up moving the RDGW role to the RDSH server though I know it´s not BPA. However this customer does not have more than one available Public IP. And as they wan´t to use both RDWeb and
RDP through RDGW that was the solution. Othern than that I had to fix 2 things in IIS on the RDSH.
1. Change the RDWebAccess Application Pool identity from ApplicationPoolIdentity to NetworkService
2. RDWeb/Pages-Applications
Settings, put in remote.company.com as value for "DefaultTSGateway
Volia it works. As a sidenote I also added the "reghack" ShowInPortal" value
1 so the full desktop connection is also available in the RDweb portal, not supported I know, but will keep it for now.
Any comments to this solution ?
Thx /Tony

Web service published but not visible

Hi,
I have developed a Webservice from a WSDL file i created from a XI outbound interface following the steps given in the thread below.
/people/sap.user72/blog/2005/11/17/xi-how-to-publish-wsdl-generated-from-xi-to-uddi
In the UDDI Client i got the message that the WS has been successfully published but i am not able to view my Web Service in the WS Navigator.
What is the procedure to view a WS published using the UDDI client? is there any direct url to view the WS?

This is the url inside my WSDL:
http://cgnsap27:8000/sap/xi/engine?type=entry&version=3.0&Sender.Service=SATYAM_LSPM_BS&Interface=http%3A%2F%2Fsatyam.com%2Fxi%2FLSPM%5ELspm_SampleIdHelp_MI
If i try the URL i get this :
- <SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SOAP:Header />
- <SOAP:Body>
- <SOAP:Fault xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<faultcode>SOAP:Client</faultcode>
<faultstring>Empty HTTP request received</faultstring>
<faultactor>http://sap.com/xi/XI/Message/30</faultactor>
- <detail>
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIProtocol</SAP:Category>
<SAP:Code area="MESSAGE">EMPTY_HTTP_REQUEST_RECEIVED</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Empty HTTP query received. No message processing possible</SAP:Stack>
</SAP:Error>
</detail>
</SOAP:Fault>
</SOAP:Body>
</SOAP:Envelope>
But what i expect is a WS in the WS Navigator as i have already published the wsdl using the UDDI client.

Captivate 5.5 published files are not visible in Fire Fox or open in new window.

When I publish and post Captivate 5.5, the HTML or the swf files do not display in Fire Fox (latest version) without forcing the file to open in a new window (if it displays at all). If it does work, the Flash security blocks the swf on an ugly view until the user clicks.
I thought it was because I have to assign a direct URL to each component, but all of the other Captivate sites I have reviewed have the same issue when viewing in Fire Fox.
IE will display after the active x is authorized (I can live with that).
You Tube and other Flash display properly in Fire Fox, just not Captivate products.
I have disabled off all plugins, modified the protected settings, and everything I could find listed in the Fire Fox help. I have installed a previous version of Flash and Shockwave Player. Short of reinstalling windows, it is not working and that will not help because the published content is not visible on any other machine in the office or at home.
The files are in a Portal, so I cannot share them unless you are in the DoD and have an AKO or DKO account.
However, here is another example of the Captivate not working.
https://clc.dau.mil/games (this displays on some computers, but not all)
http://www.hartisd.net/pages/uploaded_files/Assignment_Search.mht (After allowing the mht, this displays in IE)
I am not sure if it has something to do with the other 2 published xml files that are not directly referenced in the html, but I just need either the swf or html to display in the iframe without forcing another window to display and without a lot of dependecy issues with other add-ons in Fire Fox.
- Thanks!

Any of the DAU games, if they display. It is a government site, so they have the standard gov garbage (stuff not working like certificates), but nothing is harmful nor can they do anything to track other than the current session.
It is kind of weird how the content is displayed... It is not an intranet, it goes to a limited access portal. When I store content, it uses an absolute path instead of relative path. Very aggrevating when using many of the tools for non-programmers (like me), and probably more aggrevating for programmers.
Whether I point directly to the .swf or to the generated HTML, the content displays in IE, but not in FF.
It may be a combination of FF and Captivate. FF seems rather flaky in dealing with swf files. There is the consideration for add-ons, but I tried on a newly imaged computer and it still was not working. Even after going through all of the FF steps to get it to work.
Basically we had to create a new HTML file to display the content because the Captivate published files don't work. However, the new HTML does not reference the XML files.
When I publish, I get 5 different files, .swf, .htm, .js, and 2 .xml. When I dig through the code (once again, not a programmer, soo I may be missing something), even round tripping to Flash, I do not see how the .xml files are referenced at all.
These may be different topics, not sure, it came up because I am trying to get a simple solution from the product that can be easily transferred to our production servers and available for Solders to access.
- Thanks
Michael

Re-publish site using 3rd party FTP Client-Changes are not visible

I uploaded my Iweb site to the server using FileZilla. When I make changes in I-web and republish, the changes are not visible. I even tested it out by deleting the site folder and re-uploading everything after I re-published the site in IWeb...but the change still isn't visible. Any suggestions as to why?

Apparently you publish to a folder.
iWeb's job is done!
What you do next with the files is your responsibility.
Try uploading the changed files to their respective folders on the server.
You can identify the changed files by the date/time.
Then in the browser, clear the cache and reload the page.
iWeb is not involved.

SP 2010 Publishing - Rollup and Page Images not visible when entering page edit mode

All:
Hello, I have an odd issue recently appearing after installation of FEB 2013 CU install. When users select to Edit a Publishing Page the Rollup Image and also Page Image(Article Page Layout) are not visible. Only the "Click here to insert Image from
SharePoint" link is visible.
The issue has be confirmed in 5 servers across two farms
DEV, QA, and PROD on client recently updated
DEV and PROD in a completely separate client farm
I have confirmed the issue does not exist in two separate farms running April 2012 CU. In both of those environments the image appears with issue even in Edit page mode.
In the farms where the issue exists you can click the insert image link and simply hit OK to see the image again. An easy enough work around for tech savvy but my client's content admins are very confused/frustrated by.
Is this a bug? I have confirmed in two separate farms including brand new web applications using out of the box publishing site templates.

Hi.
We have been facing the same issue in a 2013-environment (SP1), but in this case an upgraded 2010 Solution, which still runs in 2010-mode. Because of this, SharePoint still use resource-files in the 14-hive (as we have not performed an upgrade of Master
Pages etc.) The problem is also reproduced on a clean 2010 Site Collection in the same 2013-environment.
I have managed to find the cause of the problem (at least in our environment), and that is that as long as the selected picture/image has
not defined an "AltText"/"Alternate Text" the problem seems to occur.
In other words, try to define an Alternate Text and click OK in the "Edit Image Properties" Dialog.
I don't know if this may be the case for everyone else, but give it a try.
From this, I've further discovered (after hours of js-debugging) that there is a minor change (from 2010 to 2013) in a js-file called "SelectorControls.js" which is responsible for updating the various controls used in Page Layouts etc.
The problem exist in a method called ASO_UpdateButtonsAndPanels(), which checks whether the Image Control in question has content or not (Url). The local variable "hasContent" is then determined of an if statement, if(this.AssetData.ManageLinkDisplayText)
which in 2010 (14-hive) seems to be "true" regardless whether the Control is of type Image or Hyperlink. Further the code checks for AssetText (Alternate Text) which on an Image may be left empty.
In 2013 (15-hive) however, this if statement has been changed to, if(this.SelectorType==ConstLinkSelectorType), which clearly states "Image" or "Link" depending on the type of control.
I don't know if this is the cause of the problem in 2013, but in 2010 it seems to be exactly that.
Pending a solution from Microsoft, we have modified SelectorControls.js to overcome this issue until the customer decides to do a Visual Upgrade to 2013.
This is by all means not a supported nor a a permanent solution to the problem, as future Hotfixes, Service Pack etc. may "reset" our fix.
Below is a copy of the working solution:
function ASO_UpdateButtonsAndPanels()
{ULSuBa:;
var hasContent=!!this.AssetData.AssetUrl;
//SharePoint 2010: ManageLinkDisplayText is always "True"
//var hasContent=!!this.AssetData.AssetUrl;
//if(this.AssetData.ManageLinkDisplayText)
//hasContent=hasContent && !!this.AssetData.AssetText;
//SharePoint 2013
//var a=!!this.AssetData.AssetUrl;
//if(this.SelectorType==ConstLinkSelectorType) a = a && !!this.AssetData.AssetText;
//Fix for preventing existing selected image to disappear when saving page and/or editing a page with existing image.
if(this.SelectorType!=ConstImageSelectorType)
if(this.AssetData.ManageLinkDisplayText)
hasContent=hasContent && !!this.AssetData.AssetText;
if( hasContent )
if (this.ClearAssetButton !=null)
this.ClearAssetButton.EnableButton();
this.GetAssetSelectedPanel().style.display="inline";
this.GetEmptyPanel().style.display="none";
else
if (this.ClearAssetButton !=null)
this.ClearAssetButton.DisableButton();
this.GetAssetSelectedPanel().style.display="none";
this.GetEmptyPanel().style.display="inline";
I hope this helps anyone else struggling with the same problem.
Thanks!
Øyvind

IDOC not visible in IR but metadata successfully imported

Hi,
I have this wiered issue.
I want to import IDOC WPUSKR01 (cashier productivity) from BI.
But when I connect to BI system from IR to import Idoc structure, this IDOC is not visible.
But I can manually import the metadata from BI in idx2.
Now how to import this in IR?
I have imported other Idocs (like WPUBON) before and did the scenario successfully for BI.
Regards,
Anirudh Vyas.

Hi,
In BI Tcode we82 I have manually added the entries for WPUKSR01. Now Idoc is visible when importing in IR.
I have checked all the segments in we31, they are all released.
But it gives error:
Error: IDoc type WPUKSR01 contains errors (unable to read segments)
Then, I checked in R/3, there also WPUKSR01 was not there in we82. I manually added there and I was successfully able to import it in IR.
But the same thing is failing in BI. I have SAPALL permissions in all the systems.
Can I use Idoc imported from R/3 in scenario for BI?
regards,
Anirudh.

Reporting Flag is not visible in the manage screen

Hi BI Experts, Good morning.
We load the inventory data daily in the night time which is delta load.
5 days back, we got 0 records and the request is in red.Then i rerun the infopackage manually and got the total records in to the cube.
From that day onwards its running successfully.
Yesterday i deleted the bad request from infocube.
But the Reporting flag is not visible.
Today i didnot get the records.
Please can anyone tell me the process.
Thanks in advance.
Regards
Anjali

Hi Nagesh,
Still i am not getting reporting flag.
I tried what did u say.
And today i did not get the records. Infopackages didnot run. It shows in red.
I tried to run it manually but it gives error.
The error message is:
Short text
    An exception occurred that was not caught.
What happened?
    The exception 'CX_RSR_X_MESSAGE' was raised, but it was not caught anywhere
     along
    the call hierarchy.
    Since exceptions represent error situations and this error was not
    adequately responded to, the running ABAP program 'SAPLRRMS' has to be
    terminated.
Please give me the reply.
Thanks in advance
Regards
Anjali

Photo gallery menu button not visible (black on bl...

Lately (I don't know when it changed because before it was not like this) there is some strange behavior on my N8 when viewing photos in the gallery.
If I chose a photo to view and then tap on screen to get the options I don't see the two buttons at the bottom of the screen (Options and Back buttons). I found out that the buttons are present but they are in black - meaning they are not visible if there is no picture covering those parts of the screen (see attached photos). They are only visible if the background is very bright (white).
Is there any settings to change this annoyance?
P.S. The same is true if I open pictures in Photo Editor.
Attachments:
P1050880.JPG ‏1634 KB
P1050881.JPG ‏2361 KB

Okay, I've tried .ac3 audio and I get the same result.
I had a friend of mine try this test. He had two different Progressive scan DVD players. It played perect on one and showed these errors on the other (the audio not playing and the text appearing in a different font). He said it had somthing to do with the progressive scan settings of the player. One player could switch to this type of DVD and the other one could only do it manually in the menu screen. He said that even hollywood DVDs do this on these types of DVD players. Since I have NEVER seen this problem before what could he be talking about? And why would previous versions of DVD's that I have made in DVD Studio Pro 1, 1.5 and 2 work fine on these same DVD players?
This is driving me nuts. Why would one DVD player play the DVD perfect and another one play the video fine, but mess up the audio and text buttons on the menu?
Other people I have talked to stay that it may be the media it is burned to, but I'm using the same DVD media that I have always used?
Please help!

India Localization DFF not visible

I have enabled all the india localization triggers. However, the india localization DFF "JG_AR_CASH_RECEIPTS" were not visible in the Receipt screen in Receivables. Any clues?

I believe you will need to enable the JG (Regional Localizations) module before you can use any of the JG DFFs. Pl also confirm that the India Localizations set up steps as identified in ML Doc 334838.1 (Oracle India Localization Setup User's Reference Manual) have been completed successfully.
HTH
Srini

Default values for static report parameters are not visible when scheduling

Hello
Crystal Reports 2008 Dev
Crystal Reports Server 2008
When I publish a report to the repository and then try to schedule that report, the default value that I have set for a static parameter in the report is not visible.
In the Parameters section of the Scheduling wizard this parameter is marked as [EMPTY]
However, when I View the report (right click and select View) from within Infoview, the parameter default value is visible
I have published in the following 3 ways:
Publishing Wizard
File > Save As > Enterprise from withing Crystal Reports Dev
CMC > Folders > Add > Crystal Reports
The results are the same for each method of publishing.
To try to eliminate any DB issues etc i have created a report that is not attached to a datasource.
This test report has one Static parameter.
I have set 3 values for its list: Entry A, Entry B, Entry C
Entry X is set as the parameter Default Value
The parameter is placed in the details section of the report
When the report is Viewed it will prompt for parameter entry, with the default value present
When I try to schedule the report is will not have an entry for its parameter
It seems to me that the default values for parameters should be retained from report design through to report schedule, especially when the default values are retained from report design to report View
Is this a config problem that i have ?
Can anyone help me with this ?
Best regards
Patrick Coote
Edited by: PATRICK COOTE on Oct 2, 2008 2:08 PM
Edited by: PATRICK COOTE on Oct 3, 2008 9:23 AM

Hi Robert
Thanks for the reply and apologies for not responding sooner.
What i have found is that if i use Publishing Wizard to upload reports it is then possible to set values for prompts during the last step of this process.
Although this is a bit clumsy, it is sufficient for now
Best regards
Patrick

Document message bar not visible when participating in Shared Review

Hi,
I have initiated a Shared Review using Acrobat Pro 8
Immediately after I finished sending out the notification to other reviewers, the _Review.pdf version of the document is opened for me and the Document Message bar is visible. Therefore I have the option to check for new comments, publish comments.
My colleagues however, when they open the pdf file attachment from their email notification they get the message: "This document has been sent by a user of Acrobat 8.0 Professional for your review. To participate in this review Acrobat 8.0 standard or professional, or later, is required" Pressing OK on that message box opens up the PDF file to be reviewed however the Document Message bar is not visible (there is no Document Message bar icon on the left pane either.). Therefore my colleagues cannot publish their comments.
I also encountered the same issue. After I close my PDF and re-open it, I cannot see the Document Message bar, eventhough I can still see my Review Tracker and the document still listed there.
So, what did I do wrong? I started the shared review by following the prompts:
1. Comments > Send for Shared Review
2. Enable reviewers with Reader to participate
3. Select a network drive to store the shared comments
4. Select the document to be reviewed
5. I've experiment with all the different send notifications options
6. I specified the email address of the reviewers and sent the invite
Thanks a lot for the help..

Does this happen with one particular document or with all your reviews?

CPU Multiplier is Not Visible

Brand New build: i5 4670k + z97 Gaming 5. BIOS and all drivers/utilities have been updated via Live Update 6 as of this morning.
My problem is that when I access the BIOS "Overclocking Settings", the actual CPU multiplier itself is not visible (even in Advanced mode). Turboboost is enabled. So I'm not actually able to adjust my CPU multiplier beyond the stock value (34x). But when I toggle the Overclock Genie, the CPU multiplier finally appears with a fixed multiplier of 40x (which I am not able to manually alter).
Any idea what I'm missing here?

Quote from: kreepyguy on 07-September-14, 06:35:50
Yeah, I'm afraid that I've already tried that. I just tried it again and no luck. I'm going to try resetting CMOS and see what happens.
Well, it is not possible that it doesn't work. Just scroll to where it says "CPU Ratio AUTO" so AUTO is higlighted and use +/- keys of your numpad to alter settings.

Published Manual not visible

Similar Messages

Maybe you are looking for